Closed TheNinth7 closed 3 months ago
This issue has been mentioned on openHAB Community. There might be relevant details there:
https://community.openhab.org/t/openwebnet-bticino-openhab3/128305/97
One comment for this enhancement: if it is implemented, also a way to deal with devices in PUL mode needs to be implemented. If the PUL option is set on the actuator, it is excluded from general/area/group commands. To reflect this, such an option would need to be introduced to the Things in openHAB and if it is set, those should not be affected by general/area/group commands. It may be possible to set this option automatically during discovery, at least the My Home Suite is able to read the actuator's configuration via the bus, but not sure if the binding can. If not, then setting it manually is probably a good-enough solution.
discussio on desing here: https://community.openhab.org/t/group-of-lights-as-new-thing-or-not/148464
This issue has been mentioned on openHAB Community. There might be relevant details there:
https://community.openhab.org/t/group-of-lights-as-new-thing-or-not/148464/1
This issue has been mentioned on openHAB Community. There might be relevant details there:
https://community.openhab.org/t/openwebnet-bticino-openhab4/147847/27
This issue has been mentioned on openHAB Community. There might be relevant details there:
https://community.openhab.org/t/openwebnet-bticino-openhab4/147847/56
@TheNinth7 as you may have seen this issue has been resolved and included in the latest OH Milestone. If you could test it before official release it would be useful.
Individual things/items in openHAB are not updated if their status is changed in the BTicino system via a general, area or group command.