[miio] Xiaomi Mi Robot X10 robot vacuum support

[vpant]

I recently purchased Xiaomi Mi Robot X10 and used Create channels for new/unsupported devices (MIOT protocol) to successfully create a database file.

test-dreame.vacuum.r2209-20240813-212109.txt

The following properties were tested successfully (using the Xiaomi app in parallel):

actions (Actions) with the predefined menu in the Semantic model:

• Working actions: Vacuum Start Sweel, Vacuum Stop Sweeping, Vacuum Start Room Sweep, Battery Start Charge, Brush Cleaner Reset Brush Life (reset both brushes at once), Filter Reset Filter Life, Collect Dust Collect
• No reaction by Vacuum: Vacuum Extend Start Clean, Vacuum Extend Stop Clean, Map Map Req, Map Update Map, Audio Position, Audio Play Sound, Time Delete Timer

Working channels:

• volume (Audio - Volume)
• voice_packet_id (Audio - Voice Packet Id)
• voice_change_state (Audio - Voice Change State): Reports {\"id\":\"IT\",\"state\":\"success\",\"progress\":100}
• battery_level (Battery - Battery Level)
• charging_state (Battery - Charging State)
• brush_left_time (Main Cleaning Brush - Brush Left Time)
• brush_life_level (Main Cleaning Brush - Brush Life Level)
• first_clean_time (Clean Logs - First Clean Time) -total_clean_time (Clean Logs - Total Clean Time)
• total_clean_times (Clean Logs - Total Clean Times)
• total_clean_area (Clean Logs - Total Clean Area)
• auto_collect (Collect Dust - Auto Collect)
• clean_times (Collect Dust - Clean Times)
• dust_enable (Collect Dust - Dust Enable)
• enable (Do Not Disturb - Enable)
• start_time (Do Not Disturb - Start Time)
• end_time (Do Not Disturb - End Time)
• filter_life_level (Filter - Filter Life Level)
• filter_left_time (Filter - Filter Left Time)
• mult_map_info (Map - Mult Map Info): Reports json {"object_name":"6257942110/1064458274/9","md5":"723c094848425020c7484e58ab7768e9"}
• fault (Robot Cleaner - Device Fault)
• mode (Robot Cleaner - Mode)
• status (Robot Cleaner - Status)
• brush_left_time1 (Side Cleaning Brush - Brush Left Time)
• brush_life_level1 (Side Cleaning Brush - Brush Life Level)
• time_zone (Time - Time Zone)
• timer_clean (Time - Timer Clean)

Vacuum Extend channels and values (not sure how to test them):

• break_point_restart (Vacuum Extend - Break Point Restart): Open
• carpet_press (Vacuum Extend - Carpet Press): Close
• clean_extend_data (Vacuum Extend - Clean Extend Data): NULL
• clean_rags_tip (Vacuum Extend - Clean Rags Tip): 0s
• cleaning_area (Vacuum Extend - Cleaning Area): 0
• cleaning_mode (Vacuum Extend - Cleaning Mode): Standard
• cleaning_time (Vacuum Extend - Cleaning Time): 0s
• faults (Vacuum Extend - Faults): (no value)
• keep_sweeper_timer (Vacuum Extend - Keep Sweeper Time): 0s
• mop_mode (Vacuum Extend - Mop Mode): Medium
• nation_matched (Vacuum Extend - Nation Matched): NULL
• relocation_status (Vacuum Extend - Relocation Status): 0
• remote_state (Vacuum Extend - Remote State): NULL
• serial_number (Vacuum Extend - Serial Number): reports the actual serial number
• task_status (Vacuum Extend - Task Status): 1
• waterbox_status (Vacuum Extend - Waterbox Status): No
• work_mode (Vacuum Extend - Work Mode): 14

Not working channels:

• set_voice (Audio - Set Voice): Not sure if I tested properly. I used a rule to change the value to IT but it did nto change the language

Not sure how to test:

• fame_info (Map - Frame Info): Reports NULL
• map_extend_data (Map - Map Extend Data): Reports NULL

[lsiepel]

@marcelrv this might be helpfull information.

[marcelrv]

thx. Will add this device