search

openhab / openhab-qnap-qpkg

openHAB Packages for QNAP NAS systems
Eclipse Public License 2.0
77 stars 21 forks source link

Make required firmware clear #24

Closed peelos closed 6 years ago

peelos commented 7 years ago

Thanks for a great initiative. What is not clear is which QNAP firmware is required, proposal to add this to the readme file.

mjohenneken commented 7 years ago

As I first came across your issue while searching for experiences with OH + QNAP, do you know which firmware version is required ?

peelos commented 7 years ago

Hi, I do know that for me it is working on the latest 4.3.3, hope that helps.

On May 4, 2017 17:14, "Max Johenneken" notifications@github.com wrote:

As I first came across your issue while searching for experiences with OH

  • QNAP, do you know which firmware version is required ?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/openhab/openhab-qnap-qpkg/issues/24#issuecomment-299216270, or mute the thread https://github.com/notifications/unsubscribe-auth/AVt9MSoCy0h_9Xrgje6BbEyqbHn5oUREks5r2etPgaJpZM4M_5M3 .

mjohenneken commented 7 years ago

okay i have QTS 4.2.5 i seems to be latest for my QNAP system. I will test if it works.Tough, a minimum required Version or at least RAM CPU requirements would be helpful in the docs.

On 04.05.2017 21:36, peelos wrote:

Hi, I do know that for me it is working on the latest 4.3.3, hope that helps.

On May 4, 2017 17:14, "Max Johenneken" notifications@github.com wrote:

As I first came across your issue while searching for experiences with OH

  • QNAP, do you know which firmware version is required ?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub

https://github.com/openhab/openhab-qnap-qpkg/issues/24#issuecomment-299216270, or mute the thread

https://github.com/notifications/unsubscribe-auth/AVt9MSoCy0h_9Xrgje6BbEyqbHn5oUREks5r2etPgaJpZM4M_5M3 .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/openhab/openhab-qnap-qpkg/issues/24#issuecomment-299287320, or mute the thread https://github.com/notifications/unsubscribe-auth/AE2jLd1_CM4RHJYpxKmOPNLBG_baWkzFks5r2ijagaJpZM4M_5M3.

thopiekar commented 7 years ago

The RAM requirements are always the same. I personally bought a TS-228 since it has 1GB of RAM. A lot of QNAP devices for "home use" only have have 0.5GB, which is too less, if you want to run other software as well.

peelos commented 7 years ago

I updated to QTS 4.3.3 0305 and openhab 2.0.0.2 was no longer accessible via webgui and had to install 2.0.0-3 to fix

6r15u commented 6 years ago

As I only have 1 QNAP NAS, I can only make the package for that firmware version. Nevertheless I think the config file says: QTS_MINI_VERSION="4.1.0"

I'll add this to the readme, is that solution ok with you, @peelos ? If yes, I would close this issue after your confirmation

6r15u commented 6 years ago

@mjohenneken

at least RAM CPU requirements would be helpful in the docs For me, the raw installation takes about 200MB of RAM. I don't know how QTS can handle swaps as the service doesn't need high speed. This would make sense, but I'm too less into the architecture of QTS. I think CPU requirements are so low that noone should run into trouble.

Nevertheless I will make a hint in the readme that people should be aware of this

thopiekar commented 6 years ago

I agree. But RAM is more critical. Normally you don't use the core functionality of openHAB and QTS's services. Thus, is you want to use your NAS normally (syncing data, using it as an mediaserver) and use Z-Wave and other smarthome bindings, you need (at least!) 1GB of RAM. This is what I personally recommend. Otherwise you get into trouble, when multiple processes are running at one time and consume so many ran that one of those gets out of ram. Therefore you get crashes of side functionalities and misbehaviours either in openHAB or QTS.

6r15u commented 6 years ago

Thanks for the info. Never used Z-Wave bindings. Only have homematic. But 1GB of RAM seem a lot to me. Is Java so lame?

peelos commented 6 years ago

Sure. Thanks

On 7 Jan 2018 2:20 am, "6r15u" notifications@github.com wrote:

As I only have 1 QNAP NAS, I can only make the package for that firmware version. Nevertheless I think the config file says: QTS_MINI_VERSION="4.1.0"

I'll add this to the readme, is that solution ok with you, @peelos https://github.com/peelos ? If yes, I would close this issue after your confirmation

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/openhab/openhab-qnap-qpkg/issues/24#issuecomment-355791635, or mute the thread https://github.com/notifications/unsubscribe-auth/AVt9MbmuXkBmQUU8-uVtZalfdnXF26kEks5tIBvEgaJpZM4M_5M3 .