Open justincredible68 opened 6 years ago
Hi, same issue here. Cannot open Openhab App on NAS: Website cannot be reached (ERR_CONNECTION_REFUSED)
Hardware: TS-453 PRO, firmware 4.3.4.0486 build 20180215
Openhab app did run well for a few weeks with previous firmware at http://[IP]:8090/ using KNX, network, Alexa etc. bindings.
steps already tried:
Looks to me pretty much like the issue above from justincredible68.
Anyone any ideas?
Many thanks !
@justincredible68, it now works again for me: after uninstalling the app, I removed the three folders in the openhab folder on the NAS manually, reinstalled openhab (thus the folders were re-created), copy/pasted bindings, items etc. Hope this might help you as well ?
I had the issue myself some time ago. I don't know what helped but I think restarting the service might help ar as @Alecdo-Attis did, cleaning everything up and reinstalling. With restarting the service, it's a bit tricky as restarting the service is different from restarting the NAS as then the service tries to start immerdiately, what can cause problems sometimes.
Having the same issue. I have to keep uninstalling and reinstalling and I can't find anything in the log file that shows a failure.
I am unable to get a new install of openHAB to work on my Qnap NAS.
Hardware: QNAP TS-851, firmware 4.3.4.0486
Steps: 1) Installed Java 8.151.2 2) Installed openHAB_2.2.0-1.qpkg 3) Opened Web Interface, began to congifure 4) Leave web page open, and not use for a while 5) Come back to configure, web page is no longer responsive, can't get to load. 6) Restart NAS , uninstall and reinstall qpkg, restart NAS again. 7) website at port :8090 which originally worked (even if briefly) will no longer load.
Is there anything else I can try to get this working again?
Thanks!