search

openipcamera / openipc-firmware

OpenIPC Firmware for Wyze Cameras
https://openip.cam
894 stars 129 forks source link

Unable to flash Openipc FW (Fang-hacks works) #57

Closed theirishkiwi closed 6 years ago

theirishkiwi commented 6 years ago

**correction: I'm using Xiaomi-Dafang-Hacks, not Fang-hacks.

Hi,

I've not been able to flash Openipc fw. I've been unable to get it to boot successfully. But I was able to get https://github.com/EliasKotlyar/Xiaomi-Dafang-Hacks to work.

Could you show me the steps to patch the working fang-hacks build to openipc? I've tried combining the two, but no luck so far.

One thing I have noticed is run.sh references "/system/sdcard/config" , but I cannot find this directory.

cheers Chris

openipcamera commented 6 years ago

You're trying to run the firmware for Wyze V2 on the V1 hardware. Please read the whole README.

openipcamera commented 6 years ago

Edit: run.sh only works on v2

theirishkiwi commented 6 years ago

Hi,

As far as I understand, the cameras I have are v2 as they use audio prompts when setting camera up as well as flashing leds. I have also read all of the readme.

Regards Chris

openipcamera commented 6 years ago

samtap only works on v1.

theirishkiwi commented 6 years ago

Sorry, I'm using dafang-hacks, not fang-hacks. I've tried all of them to see what will work. Pasted the wrong link.

https://github.com/EliasKotlyar/Xiaomi-Dafang-Hacks

FuzzyMistborn commented 6 years ago

OpenIPC is a fork of Dafang-Hacks. There's no need to try to integrate the two.

theirishkiwi commented 6 years ago

Is there a way to patch a working Dafang-hacks build to Openipc? The openipc fork has quite a number of developments I'd like to use over Dafang-hacks.

Not sure why I can't get the openipc fork to work? Any help or guidance would be much appreciated.

openipcamera commented 6 years ago

There is no difference other than openipc works on Wyze

FuzzyMistborn commented 6 years ago

@theirishkiwi it should be as simple as download the img, use etcher to write to an SD card, turn off camera, insert memory card into camera, hold the button on the bottom of the cam while plugging it in, and hold until the led light turns blue. Then just wait.

openipcamera commented 6 years ago

the kernel differs between dafang-hacks and openipc.