Set up HW pod - Githubissues

opennetworkinglab / stratum-onos-demo

Stratum+ONOS demo @ ONF Connect 2019 & EuroP4 '19

Apache License 2.0

13 stars 7 forks source link

Set up HW pod #14

Closed ccascone closed 5 years ago

ccascone commented 5 years ago

Edgecore Wedge 100BF 32x (spine) 1U
Delta AG9064v1 (spine) 2U
Inventec D5254 (leaf) 1U
Edgecore 7712 (leaf) 1U
1 Server with 2 2-port 40G NICs (ONOS and traffic-gen) 1U
mgmt sw (small netgear)
[x] Move HW into rack
[x] Install stratum_bf / stratum_bcm
[x] Verify that ports between SWs come up
[x] Veirfy that ports between server and SWs come up

Yi-Tseng commented 5 years ago

Ports between P4 switches (Wedge100bf32x, d5254, AG9064v1) works Ports between P4 switch and the server (4x40G) works

Note: The AG9064v1 does not use the containerized version of Stratum because of the ONL is Debian 8 version. The minimum requirement of Docker is Debian 9 Currently, I build and install SDE and Stratum on the switch directly.

ccascone commented 5 years ago

Thank you! Can you please create the netcfg as in #5?

It should contain:

IP addr/port of the switches
interface config (for host-facing ports)
Host config (to have friendly names in the UI/CLI)