twpol
commented
11 years ago Imported from https://bugs.launchpad.net/or/+bug/1166608/comments/1
| Property | Value |
|---|---|
| Posted by | Artem (art-trans-6339) |
| Date posted | Tue, 09 Apr 2013 06:32:12 GMT |
Open twpol opened 11 years ago
twpol
commented
11 years ago | Property | Value |
|---|---|
| Posted by | Artem (art-trans-6339) |
| Date posted | Tue, 09 Apr 2013 06:32:12 GMT |
twpol
commented
11 years ago | Property | Value |
|---|---|
| Posted by | Jijun Tang (jtang-h) |
| Date posted | Fri, 26 Apr 2013 02:53:30 GMT |
Fixed in 1586.
twpol
commented
11 years ago | Property | Value |
|---|---|
| Posted by | Artem (art-trans-6339) |
| Date posted | Tue, 30 Apr 2013 16:55:31 GMT |
In X.1587 I have seen no changes about this bug. Yes, ammeters are animated, but they do not show correct information (as MSTS does). From 0 KmH speed at 5% controller ammeters must show about 600 A (if the loco has cars ahead). I tried to change configurations of loco-eng-files, cabview-cvf-files, but any changes show nothing.
twpol
commented
11 years ago | Property | Value |
|---|---|
| Posted by | Artem (art-trans-6339) |
| Date posted | Thu, 14 Nov 2013 15:28:01 GMT |
Not fixet at all. Ammeters are still working incorrectly as at MSTS.
twpol
commented
11 years ago | Property | Value |
|---|---|
| Posted by | Jijun Tang (jtang-h) |
| Date posted | Thu, 14 Nov 2013 16:02:03 GMT |
So it is not an animation issue, but an issue associated with proper values.
twpol
commented
11 years ago | Property | Value |
|---|---|
| Posted by | Artem (art-trans-6339) |
| Date posted | Thu, 14 Nov 2013 17:32:12 GMT |
Values have been changes a lot of times - you may download locomotive with cabview and try to play with values as you want but more than 150 A Open Rails does not show even at 100% of throttle. Just try it to see that I'm or you're right.
14.11.2013, 18:18, "Jijun Tang"
So it is not an animation issue, but an issue associated with proper values.
-- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1166608
Title: Ammeter cab controls do not work
Status in Open Rails Tracker: Opinion
Bug description: Ammeters does not work properly or at all. E.g. Electric locomotive CHS7-316 (download link below) http://get.zdsim.com/msts/electric/zdsLoco_chs7-316_v3_0.exe Cabview for CHS7 locos (download link below) http://get.zdsim.com/msts/electric/zdsLoco_chs7-cabview_1_v2_0.exe Sounds for CHS7 locos (download link below) http://get.zdsim.com/msts/electric/zdsLoco_chs7-sounds_v3_0.exe
Arrows of all 4 ammeters does not move at all. Same at all other locomotives. Bug is found maybe since first versions when multiplayer appeared. Bug is foung only at multiplayer mode (single mode I don't use).
Attached screen shows - loco has 100% throttle but no one ammeter has any move.
To manage notifications about this bug go to: https://bugs.launchpad.net/or/+bug/1166608/+subscriptions
-- С Уважением, Артём Букреев ZDSim.com - клуб железнодорожников
Imported from https://bugs.launchpad.net/bugs/1166608
Ammeters does not work properly or at all. E.g. Electric locomotive CHS7-316 (download link below) http://get.zdsim.com/msts/electric/zdsLoco_chs7-316_v3_0.exe Cabview for CHS7 locos (download link below) http://get.zdsim.com/msts/electric/zdsLoco_chs7-cabview_1_v2_0.exe Sounds for CHS7 locos (download link below) http://get.zdsim.com/msts/electric/zdsLoco_chs7-sounds_v3_0.exe
Arrows of all 4 ammeters does not move at all. Same at all other locomotives. Bug is found maybe since first versions when multiplayer appeared. Bug is foung only at multiplayer mode (single mode I don't use).
Attached screen shows - loco has 100% throttle but no one ammeter has any move.