Easy to use, GUI, BK7231T/BK7231N flash tool and GPIO config extractor for beginners. Dedicated for Windows platform, but works on Linux with Mono. This tool can automatically download latest firmware (on user request) and then do a full BK backup and then write new flash cycle. This tool replaces old bkWriter 1.60 and hid_download_py.
234
stars
24
forks
source link
Lowest baud rate to allow communication w/o removing capacitor #28
Hi,
this was the second unit which had a 100nF capacitor on a transmission line.
If BK7231GUIFlashTool would allow us to select lower baud rates, we could read the FW without removing the capacitor (or scratching the PCB).
I am sure all prefer to avoid physically altering the unit.
We would leave the reading of the current firmware to just run over night.
Would be great if this option could be enabled.
Hi, this was the second unit which had a 100nF capacitor on a transmission line. If BK7231GUIFlashTool would allow us to select lower baud rates, we could read the FW without removing the capacitor (or scratching the PCB). I am sure all prefer to avoid physically altering the unit. We would leave the reading of the current firmware to just run over night. Would be great if this option could be enabled.