Open commonsguy opened 9 years ago
Hi,
Thanks for the feedback. We're going to open source our shelf design shortly!
On Thursday, July 2, 2015, Mark Murphy notifications@github.com wrote:
The documentation in your README for relevant hardware is excellent! You might consider adding another section, with advice on the physical setup of the device farm.
For example: what exactly is shown in the photo at the top of the README, with the aluminum(?) slats holding the devices? My initial reaction was a rackmount system, but I would think that we would see holes in the vertical supports, and such holes do not appear in the photo.
— Reply to this email directly or view it on GitHub https://github.com/openstf/stf/issues/1.
Tks for your help
Hi @sorccu ,
There are some news about this topic or when will be released?
Regards
Sorry, we have no time to clean up the design for release. Furthermore, we are targeting different hardware now, requiring a different design.
On Monday, 20 June 2016, joaopedroms22 notifications@github.com wrote:
Hi @sorccu https://github.com/sorccu ,
There are some news about this topic or when will be released?
Regards
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/openstf/stf/issues/1#issuecomment-227109718, or mute the thread https://github.com/notifications/unsubscribe/AAB-_QmupwLIkMeecP9iTIMGhQk5c02fks5qNm-bgaJpZM4FQlK2 .
Ok, thanks for you anwser.
hi @sorccu,
Can you send to me more pics from your shelf? I want to build a similar , but with the photos who are on your site is complicated to see the details of it. How is that cell phones are stuck in the support?
Regards
The documentation in your
README
for relevant hardware is excellent! You might consider adding another section, with advice on the physical setup of the device farm.For example: what exactly is shown in the photo at the top of the
README
, with the aluminum(?) slats holding the devices? My initial reaction was a rackmount system, but I would think that we would see holes in the vertical supports, and such holes do not appear in the photo.