search

opentechinstitute / commotion-router

The build system for the OpenWRT-based Commotion firmware.
https://commotionwireless.net
GNU General Public License v3.0
121 stars 43 forks source link

New TP-Link WDR4300 configs won't broadcast multiple APs #132

Closed areynold closed 10 years ago

areynold commented 10 years ago

When running a 5GHz and 2.4GHz AP, the 5GHz SSID is the only one broadcast. If I remove the 5GHz interface, the 2.4GHz AP shows up.

@jheretic this is the 1.1rc2 image + cherry picked configs that we discussed this morning. The source is in the tplink-config branch.

andygunn commented 10 years ago

Just tested a TP-Link WDR4300 today, and was not able to re-create this issue. Created AP and Mesh connection on both 2.4GHz and 5GHz radios, and could see all connections on Wi-Fi analyzer and connect. Meshed on 2.4GHz, was able to connect on 2.4GHz and 5GHz APs. Should be tested on another TP-Link before closing.

jheretic commented 10 years ago

I'm pretty sure this has been superseded by enhancements to the switch config in the meantime.