search

openthread / wpantund

Wireless Network Interface Daemon for Low-Power Wireless SoCs
Apache License 2.0
174 stars 110 forks source link

wpantund.service is not running by default #511

Closed arvindmukati closed 2 years ago

arvindmukati commented 2 years ago

I want Open Thread Border Router (OTBR) Web GUI to configure and form, join, or check the status of a Thread network. I am trying to Setup the Border Router Using Beagle Bone Black and TI Board CC2652R1 as a NCP.

I have followed this below steps to setup the Border Router.

  1. Flashed the bone-debian-10.3-iot-armhf-2020-04-06-4gb image on Beagle Bone Black.
  2. Expanded the partition to enable usage of the entire storage capacity. sudo /opt/scripts/tools/grow_partition.sh sudo shutdown -r now
  3. Installation of Border Router git clone https://github.com/openthread/ot-br-posix cd ot-br-posix ./script/bootstrap ./script/setup
  4. Installation of wpantund git clone https://github.com/openthread/wpantund.git cd wpantund git checkout full/latest-release sudo apt-get update sudo apt-get install dbus libreadline sudo apt-get install gcc g++ libdbus-1-dev libboost-dev libreadline-dev git checkout full/latest-release sudo apt-get install libtool autoconf autoconf-archive ./bootstrap.sh ./configure --sysconfdir=/etc make sudo make install
  5. configure the /etc/wpantund.conf file Config:NCP:SocketPath "serial:/dev/ttyACM0,raw,b115200,crtscts=0

I am able to open Open Thread Border Router Web Page Using IP address of BBB but when I try to Form network it throws an error "Form Operation is failed".

I am attaching some commands output -

  1. sudo systemctl status

    ? beaglebone
State: running
 Jobs: 1 queued
Failed: 0 units
Since: Wed 2022-04-27 09:08:08 UTC; 34min ago
CGroup: /
       tquser.slice
       x mquser-1000.slice
       x   tquser@1000.service
       x   x mqinit.scope
       x   x   tq1785 /lib/systemd/systemd --user
       x   x   mq1786 (sd-pam)
       x   mqsession-1.scope
       x     tq1679 /bin/login -p --
       x     tq1795 -bash
       x     tq5992 sudo systemctl status
       x     tq5994 systemctl status
       x     mq5995 pager
       tqinit.scope
       x mq1 /sbin/init
       mqsystem.slice
         tqalsa-state.service
         x mq1675 /usr/sbin/alsactl -E HOME=/run/alsa -s -n 19 -c rdaemon
         tqsystemd-timesyncd.service
         x mq765 /lib/systemd/systemd-timesyncd
         tqtayga.service
         x mq1146 /usr/sbin/tayga --pidfile /var/run/tayga.pid
         tqdbus.service
         x mq791 /usr/bin/dbus-daemon --system --address=systemd: --nofork -
         tqssh.service
         x mq1047 /usr/sbin/sshd -D
         tqavahi-daemon.service
         x tq808 avahi-daemon: running [beaglebone.local]
         x mq840 avahi-daemon: chroot helper
         tqsystem-serial\x2dgetty.slice
         x mqserial-getty@ttyS0.service
         x   mq1076 /sbin/agetty -o -p -- \u --keep-baud 115200,38400,9600 t
         tqotbr-web.service
         x mq1215 /usr/sbin/otbr-web
         tqsystem-getty.slice
         x mqgetty@tty1.service
         x   mq1068 /sbin/agetty -o -p -- \u --noclear tty1 linux
         tqwpa_supplicant.service
         x mq805 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
         tqconnman.service
         x mq799 /usr/sbin/connmand -n --nodnsproxy
         tqsystemd-logind.service
         x mq815 /lib/systemd/systemd-logind
         tqotbr-agent.service
         x tq5973 /bin/sh /usr/sbin/service mdns start
         x mq5997 systemctl -p Triggers show systemd-udevd-control.socket
         tqcron.service
         x mq802 /usr/sbin/cron -f
         tqsystemd-udevd.service
         x mq758 /lib/systemd/systemd-udevd
         tqrsyslog.service
         x mq811 /usr/sbin/rsyslogd -n -iNONE
         tqmdns.service
         x mq1210 /usr/sbin/mdnsd
         tqsystemd-journald.service
         x mq746 /lib/systemd/systemd-journald
         mqhaveged.service
           mq766 /usr/sbin/haveged --Foreground --verbose=1 -w 1024
lines 41-63/63 (END)

  1. sudo wpanctl status

    error: The name com.nestlabs.WPANTunnelDriver was not provided by any .service files wpanctl: error: wpantund is either not running, locked up, or incompatible with this version of wpanctl.

  2. sudo /usr/local/sbin/wpantund -o NCPSocketName /dev/ttyACM0 -o SyslogMask all -I wpan0

debian@beaglebone:~$ sudo /usr/local/sbin/wpantund -o NCPSocketName /dev/ttyACM0 -o SyslogMask all -I wpan0 wpantund[3077]: Starting wpantund 0.07.01 (Apr 26 2022 10:36:59) . . . wpantund[3077]: SOURCE_VERSION = 0.07.01-2-g6993264-dirty wpantund[3077]: BUILD_VERSION = 0.07.01-2-g6993264-dirty wpantund[3077]: Reading configuration from "/etc/wpantund.conf" . . . wpantund[3077]: Configuration file "/etc/wpantund.conf" read. wpantund[3077]: CONFIGURATION PROPERTY "NCPSocketName" IS DEPRECATED. Please use "Config:NCP:SocketPath" instead. wpantund[3077]: CONFIGURATION PROPERTY "SyslogMask" IS DEPRECATED. Please use "Daemon:SyslogMask" instead. wpantund[3077]: set-config-param: "Config:NCP:SocketPath" = "/dev/ttyACM0" wpantund[3077]: set-config-param: "Config:TUN:InterfaceName" = "wpan0" wpantund[3077]: set-config-param: "Daemon:SyslogMask" = "all" wpantund[3077]: set-config-param: "Daemon:SyslogMask" set succeded wpantund[3077]: Getting DBus connection wpantund[3077]: Registering DBus connection wpantund[3077]: Requesting DBus connection name com.nestlabs.WPANTunnelDriver wpantund[3077]: Ready. Using DBUS bus ":1.18" wpantund[3077]: Stat (autolog): Tx: 0 packets (0 udp, 0 tcp, 0 icmp6) -- 0 bytes wpantund[3077]: Stat (autolog): Tx history is empty wpantund[3077]: Stat (autolog): wpantund[3077]: Stat (autolog): Rx: 0 packets (0 udp, 0 tcp, 0 icmp6) -- 0 bytes wpantund[3077]: Stat (autolog): Rx history is empty wpantund[3077]: Stat (autolog): wpantund[3077]: Stat (autolog): NCP state history is empty. wpantund[3077]: Stat (autolog): wpantund[3077]: Stat (autolog): wpantund[3077]: Opening tun interface socket with name "wpan0" wpantund[3077]: Running as root without dropping privileges! wpantund[3077]: SELECT: fd_count=8 cms_timeout=0 wpantund[3077]: SELECT: read_fd_set: 4, 7 wpantund[3077]: SELECT: write_fd_set: wpantund[3077]: Initializing NCP wpantund[3077]: NCP is now BUSY. wpantund[3077]: SELECT: fd_count=8 cms_timeout=0 wpantund[3077]: SELECT: read_fd_set: 4, 5, 6, 7 wpantund[3077]: SELECT: write_fd_set: wpantund[3077]: SELECT: fd_count=8 cms_timeout=100 wpantund[3077]: SELECT: read_fd_set: 4, 5, 6, 7 wpantund[3077]: SELECT: write_fd_set: wpantund[3077]: [->NCP] CMD_PROP_VALUE_GET(PROP_PROTOCOL_VERSION) tid:1 wpantund[3077]: ? 810201 wpantund[3077]: SELECT: fd_count=8 cms_timeout=5000



Please suggest me any solution.
I am new in OpenThread and Linux, If I did any silly mistake please forgive me