Output fails when running with duration higher than 2000

LucianSheen commented 1 year ago

If this issue is intended to be a bug report, please fill out the following:

Expected behavior Using 0.9.3 image in docker, but whenever I try to run the simulation with command run.cmd -d 2000 or more, it fails.

here is an example:

2023-04-22 02:25:06 >> -------------------------------------------------------------- 2023-04-22 02:25:06 >> Command exited with -9: python sibernetic_c302.py 2023-04-22 02:25:06 -duration 2200.0 2023-04-22 02:25:06 -dt 0.005 2023-04-22 02:25:06 -dtNrn 0.05 2023-04-22 02:25:06 -logstep 100 2023-04-22 02:25:06 -device=CPU 2023-04-22 02:25:06 -configuration worm_crawl_half_resolution 2023-04-22 02:25:06 -reference FW 2023-04-22 02:25:06 -c302params C2 2023-04-22 02:25:06 -datareader UpdatedSpreadsheetDataReader2 2023-04-22 02:25:06 -outDir simulations 2023-04-22 02:25:06 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2023-04-22 02:25:06 2023-04-22 02:25:06 Exiting as the last command failed

Actual behavior

Steps to reproduce the behavior

If this issue is intended to be a beginner issue, please add all of the following:

[ ] Requirements are clearly specified
[ ] Links to relevant "getting started" documentation
[ ] Tagged as "beginner"
[ ] Tagged with language skill needed to complete
[ ] Level of difficulty:
- Trivial = Changing one-line of code somewhere.
- Standalone = Changes & Development do not affect other components of project. Tasks can be on a critical path, but probably should not be.
- Simple = from 2 hours work to maybe a week’s work (Thinking + Coding)

pgleeson commented 1 year ago

Thanks for reporting @LucianSheen. I've not had problems running the docker file myself recently, but admittedly I've not run it for very long simulations. I'll try again locally and see if I can reproduce. Just to clarify, did you rebuild the image from the master branch or use the dockerhub version?

LucianSheen commented 1 year ago

Hello Padraig, Thanks for the email, and I built the image using github repo(tried the both master branch and 0.9.3 and they both showed me this issue) I'll try the dockerhub version and will let you know, too.

Best, Lucian

On Fri, 28 Apr 2023 at 18:04, Padraig Gleeson @.***> wrote:

Thanks for reporting @LucianSheen https://github.com/LucianSheen. I've not had problems running the docker file myself recently, but admittedly I've not run it for very long simulations. I'll try again locally and see if I can reproduce. Just to clarify, did you rebuild the image from the master branch or use the dockerhub version?

— Reply to this email directly, view it on GitHub https://github.com/openworm/OpenWorm/issues/332#issuecomment-1527841080, or unsubscribe https://github.com/notifications/unsubscribe-auth/A7G37LVXGCRW3U5SWONBBNTXDP2ANANCNFSM6AAAAAAXKYA7DI . You are receiving this because you were mentioned.Message ID: @.***>

pgleeson commented 1 year ago

So I've been trying to test this out. The 5 second run of the Docker image worked fine on my Linux machine, but took 10 hours. It has 20 processers and 64GB ram and after it finished the swap memory had been used, so I suspect it took up quite a bit of memory while running.

A simulation of 0.5 seconds on my more modest laptop (Mac M2) failed with a similar error to you. I suspect then that it's running out of memory in the image and failing. What OS/specs are your machine?

Unfortunately I suspect it will require quite a powerful machine to run the full thing, unless Sibernetic (or the Python interface) can be optimised more...

LucianSheen commented 1 year ago

Hello Padraig,

I was running the simulation in Windows 10 with my desktop, which has got amd 3900x, 32gb ram, gtx 1070. I was suspecting the same because I failed with the docker pulled image, although I haven’t tried in Linux, but thank you so much for the update!

On Fri, 5 May 2023 at 18:24, Padraig Gleeson @.***> wrote:

So I've been trying to test this out. The 5 second run of the Docker image worked fine on my Linux machine, but took 10 hours. It has 20 processers and 64GB ram and after it finished the swap memory had been used, so I suspect it took up quite a bit of memory while running.

A simulation of 0.5 seconds on my more modest laptop (Mac M2) failed with a similar error to you. I suspect then that it's running out of memory in the image and failing. What OS/specs are your machine?

Unfortunately I suspect it will require quite a powerful machine to run the full thing, unless Sibernetic (or the Python interface) can be optimised more...

— Reply to this email directly, view it on GitHub https://github.com/openworm/OpenWorm/issues/332#issuecomment-1536560258, or unsubscribe https://github.com/notifications/unsubscribe-auth/A7G37LU6MEEE5VTKIZE26M3XEUZTBANCNFSM6AAAAAAXKYA7DI . You are receiving this because you were mentioned.Message ID: @.***>

LucianSheen commented 1 year ago

Hello Padraig!

I have been also working with robot project as well, and it seems like wormpy.py in WormHost lacks of some codes. In worm_run.py , which will run the robot, it has got: wormpy.get_segment_angles(segment) but there's no such function get_segment_angles in wormpy.py

I tried to add: def get_segment_angles(segment): return _wormpy.get_segment_angles(segment) get_segment_angles = _wormpy.get_segment_angles

but it seems _wormpy.pyd doesn't have get_segment_angles either. Do I need to calculate the angle per segments? if so, it would be great to get help for how to do this.

Best, Lucain

On Fri, 5 May 2023 at 19:13, Lucian Shin @.***> wrote:

Hello Padraig,

I was running the simulation in Windows 10 with my desktop, which has got amd 3900x, 32gb ram, gtx 1070. I was suspecting the same because I failed with the docker pulled image, although I haven’t tried in Linux, but thank you so much for the update!

On Fri, 5 May 2023 at 18:24, Padraig Gleeson @.***> wrote:

So I've been trying to test this out. The 5 second run of the Docker image worked fine on my Linux machine, but took 10 hours. It has 20 processers and 64GB ram and after it finished the swap memory had been used, so I suspect it took up quite a bit of memory while running.

A simulation of 0.5 seconds on my more modest laptop (Mac M2) failed with a similar error to you. I suspect then that it's running out of memory in the image and failing. What OS/specs are your machine?

Unfortunately I suspect it will require quite a powerful machine to run the full thing, unless Sibernetic (or the Python interface) can be optimised more...

— Reply to this email directly, view it on GitHub https://github.com/openworm/OpenWorm/issues/332#issuecomment-1536560258, or unsubscribe https://github.com/notifications/unsubscribe-auth/A7G37LU6MEEE5VTKIZE26M3XEUZTBANCNFSM6AAAAAAXKYA7DI . You are receiving this because you were mentioned.Message ID: @.***>

pgleeson commented 1 year ago

Hi @LucianSheen. I've not been involved with that code, but I see @portegys over there has helped you out with some answers.

BTW, there is a new Python visualisation/replay tool for the Boyle Berri Cohen model at https://github.com/OpenSourceBrain/CelegansNeuromechanicalGaitModulation.

Daasin commented 1 month ago

Huh, this is the same issue I've been having too...

openworm / OpenWorm

Output fails when running with duration higher than 2000 #332