AW7915-BMD is not working with 5GHz

I'm trying to make as AP with 5GHz but upto 2.4GHz only it can work currently im using kernel 5.10 using sysfs I enabled the dbdcecho 1 > /sys/kernel/debug/ieee80211/phy0/mt76/dbdc now it 2 phy is showing in "iw list" ` Wiphy phy1 wiphy index: 1 max # scan SSIDs: 4 max scan IEs length: 2200 bytes max # sched scan SSIDs: 0 max # match sets: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports RSN-IBSS. Device supports AP-side u-APSD. Device supports T-DLS. Supported Ciphers:

WEP40 (00-0f-ac:1)
WEP104 (00-0f-ac:5)
TKIP (00-0f-ac:2)
CCMP-128 (00-0f-ac:4)
CCMP-256 (00-0f-ac:10)
GCMP-128 (00-0f-ac:8)
GCMP-256 (00-0f-ac:9)
CMAC (00-0f-ac:6)
CMAC-256 (00-0f-ac:13)
GMAC-128 (00-0f-ac:11)
GMAC-256 (00-0f-ac:12) Available Antennas: TX 0x1 RX 0x1 Configured Antennas: TX 0x1 RX 0x1 Supported interface modes:
- IBSS
- managed
- AP
- AP/VLAN
- monitor
- P2P-client
- P2P-GO Band 1: Capabilities: 0x97f RX LDPC HT20/HT40 SM Power Save disabled RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 1-stream Max AMSDU length: 7935 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: No restriction (0x00) HT TX/RX MCS rate indexes supported: 0-7 HE Iftypes: Station HE MAC Capabilities (0x08031a000040): +HTC HE Supported TWT Requester Trigger Frame MAC Padding Duration: 2 OM Control Maximum A-MPDU Length Exponent: 3 A-MSDU in A-MPDU HE PHY Capabilities: (0x2270ce126d00f3064e3f00): HE40/2.4GHz 242 tone RUs/2.4GHz Device Class: 1 LDPC Coding in Payload HE SU PPDU with 1x HE-LTF and 0.8us GI NDP with 4x HE-LTF and 3.2us GI STBC Tx <= 80MHz STBC Rx <= 80MHz Full Bandwidth UL MU-MIMO Partial Bandwidth UL MU-MIMO DCM Max Constellation: 2 DCM Max Constellation Rx: 2 SU Beamformee Beamformee STS <= 80Mhz: 3 Beamformee STS > 80Mhz: 3 Codebook Size SU Feedback Codebook Size MU Feedback Triggered CQI Feedback Partial Bandwidth Extended Range Partial Bandwidth DL MU-MIMO PPE Threshold Present Power Boost Factor ar HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI 20MHz in 40MHz HE PPDU 2.4GHz 20MHz in 160/80+80MHz HE PPDU 80MHz in 160/80+80MHz HE PPDU DCM Max BW: 1 Longer Than 16HE SIG-B OFDM Symbols Non-Triggered CQI Feedback TX 1024-QAM RX 1024-QAM RX Full BW SU Using HE MU PPDU with Compression SIGB RX Full BW SU Using HE MU PPDU with Non-Compression SIGB HE RX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: not supported 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE TX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: not supported 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported PPE Threshold 0xb9 0x18 0x0e 0x03 HE Iftypes: AP HE MAC Capabilities (0x00051a081044): +HTC HE Supported TWT Responder BSR OM Control Maximum A-MPDU Length Exponent: 3 BQR A-MSDU in A-MPDU OM Control UL MU Data Disable RX HE PHY Capabilities: (0x0220ce126dc08300000000): HE40/2.4GHz LDPC Coding in Payload NDP with 4x HE-LTF and 3.2us GI STBC Tx <= 80MHz STBC Rx <= 80MHz Full Bandwidth UL MU-MIMO Partial Bandwidth UL MU-MIMO DCM Max Constellation: 2 DCM Max Constellation Rx: 2 SU Beamformee Beamformee STS <= 80Mhz: 3 Beamformee STS > 80Mhz: 3 Ng = 16 SU Feedback Ng = 16 MU Feedback Codebook Size SU Feedback Codebook Size MU Feedback PPE Threshold Present HE RX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: not supported 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE TX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: not supported 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported PPE Threshold 0xb9 0x18 0x0e 0x03 Bitrates (non-HT):
  - 1.0 Mbps (short preamble supported)
  - 2.0 Mbps (short preamble supported)
  - 5.5 Mbps (short preamble supported)
  - 11.0 Mbps (short preamble supported)
  - 6.0 Mbps
  - 9.0 Mbps
  - 12.0 Mbps
  - 18.0 Mbps
  - 24.0 Mbps
  - 36.0 Mbps
  - 48.0 Mbps
  - 54.0 Mbps Frequencies:
  - 2412 MHz [1] (20.0 dBm)
  - 2417 MHz [2] (20.0 dBm)
  - 2422 MHz [3] (20.0 dBm)
  - 2427 MHz [4] (20.0 dBm)
  - 2432 MHz [5] (20.0 dBm)
  - 2437 MHz [6] (20.0 dBm)
  - 2442 MHz [7] (20.0 dBm)
  - 2447 MHz [8] (20.0 dBm)
  - 2452 MHz [9] (20.0 dBm)
  - 2457 MHz [10] (20.0 dBm)
  - 2462 MHz [11] (20.0 dBm)
  - 2467 MHz [12] (20.0 dBm) (no IR)
  - 2472 MHz [13] (20.0 dBm) (no IR)
  - 2484 MHz [14] (20.0 dBm) (no IR) Supported commands:
- new_interface
- set_interface
- new_key
- start_ap
- new_station
- set_bss
- authenticate
- associate
- deauthenticate
- disassociate
- join_ibss
- remain_on_channel
- set_tx_bitrate_mask
- frame
- frame_wait_cancel
- set_wiphy_netns
- set_channel
- set_wds_peer
- tdls_mgmt
- tdls_oper
- probe_client
- set_noack_map
- register_beacons
- start_p2p_device
- set_mcast_rate
- testmode
- connect
- disconnect
- channel_switch
- set_qos_map
- set_multicast_to_unicast software interface modes (can always be added):
- AP/VLAN
- monitor valid interface combinations:
- { IBSS } <= 1, #{ managed, AP } <= 4,
```
       total <= 4, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz }
```
  HT Capability overrides:
- MCS: ff ff ff ff ff ff ff ff ff ff
- maximum A-MSDU length
- supported channel width
- short GI for 40 MHz
- max A-MPDU length exponent
- min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. Device supports SAE with AUTHENTICATE command Device supports low priority scan. Device supports scan flush. Device supports AP scan. Device supports per-vif TX power setting Driver supports full state transitions for AP/GO clients Driver supports a userspace MPM Device supports active monitor (which will ACK incoming frames) Device supports configuring vdev MAC-addr on create. max # scan plans: 1 max scan plan interval: -1 max scan plan iterations: 0 Supported TX frame types:
- IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types:
- IBSS: 0x40 0xb0 0xc0 0xd0
- managed: 0x40 0xb0 0xd0
- AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- mesh point: 0xb0 0xc0 0xd0
- P2P-client: 0x40 0xd0
- P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- P2P-device: 0x40 0xd0 Supported extended features:
[ FILS_STA ]: STA FILS (Fast Initial Link Setup)
[ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
[ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
[ TXQS ]: FQ-CoDel-enabled intermediate TXQs
[ AIRTIME_FAIRNESS ]: airtime fairness scheduling
[ AQL ]: Airtime Queue Limits (AQL)
[ SCAN_RANDOM_SN ]: use random sequence numbers in scans
[ SCAN_MIN_PREQ_CONTENT ]: use probe request with only rate IEs in scans
[ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
[ DEL_IBSS_STA ]: deletion of IBSS station support
[ SCAN_FREQ_KHZ ]: scan on kHz frequency support
[ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support Wiphy phy0 wiphy index: 0 max # scan SSIDs: 4 max scan IEs length: 2200 bytes max # sched scan SSIDs: 0 max # match sets: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports RSN-IBSS. Device supports AP-side u-APSD. Device supports T-DLS. Supported Ciphers:
WEP40 (00-0f-ac:1)
WEP104 (00-0f-ac:5)
TKIP (00-0f-ac:2)
CCMP-128 (00-0f-ac:4)
CCMP-256 (00-0f-ac:10)
GCMP-128 (00-0f-ac:8)
GCMP-256 (00-0f-ac:9)
CMAC (00-0f-ac:6)
CMAC-256 (00-0f-ac:13)
GMAC-128 (00-0f-ac:11)
GMAC-256 (00-0f-ac:12) Available Antennas: TX 0x1 RX 0x1 Configured Antennas: TX 0x1 RX 0x1 Supported interface modes:
- IBSS
- managed
- AP
- AP/VLAN
- monitor
- P2P-client
- P2P-GO Band 1: Capabilities: 0x97f RX LDPC HT20/HT40 SM Power Save disabled RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 1-stream Max AMSDU length: 7935 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: No restriction (0x00) HT TX/RX MCS rate indexes supported: 0-7 HE Iftypes: Station HE MAC Capabilities (0x08031a000040): +HTC HE Supported TWT Requester Trigger Frame MAC Padding Duration: 2 OM Control Maximum A-MPDU Length Exponent: 3 A-MSDU in A-MPDU HE PHY Capabilities: (0x2270ce126d00f3064e3f00): HE40/2.4GHz 242 tone RUs/2.4GHz Device Class: 1 LDPC Coding in Payload HE SU PPDU with 1x HE-LTF and 0.8us GI NDP with 4x HE-LTF and 3.2us GI STBC Tx <= 80MHz STBC Rx <= 80MHz Full Bandwidth UL MU-MIMO Partial Bandwidth UL MU-MIMO DCM Max Constellation: 2 DCM Max Constellation Rx: 2 SU Beamformee Beamformee STS <= 80Mhz: 3 Beamformee STS > 80Mhz: 3 Codebook Size SU Feedback Codebook Size MU Feedback Triggered CQI Feedback Partial Bandwidth Extended Range Partial Bandwidth DL MU-MIMO PPE Threshold Present Power Boost Factor ar HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI 20MHz in 40MHz HE PPDU 2.4GHz 20MHz in 160/80+80MHz HE PPDU 80MHz in 160/80+80MHz HE PPDU DCM Max BW: 1 Longer Than 16HE SIG-B OFDM Symbols Non-Triggered CQI Feedback TX 1024-QAM RX 1024-QAM RX Full BW SU Using HE MU PPDU with Compression SIGB RX Full BW SU Using HE MU PPDU with Non-Compression SIGB HE RX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: not supported 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE TX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: not supported 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported PPE Threshold 0xb9 0x18 0x0e 0x03 HE Iftypes: AP HE MAC Capabilities (0x00051a081044): +HTC HE Supported TWT Responder BSR OM Control Maximum A-MPDU Length Exponent: 3 BQR A-MSDU in A-MPDU OM Control UL MU Data Disable RX HE PHY Capabilities: (0x0220ce126dc08300000000): HE40/2.4GHz LDPC Coding in Payload NDP with 4x HE-LTF and 3.2us GI STBC Tx <= 80MHz STBC Rx <= 80MHz Full Bandwidth UL MU-MIMO Partial Bandwidth UL MU-MIMO DCM Max Constellation: 2 DCM Max Constellation Rx: 2 SU Beamformee Beamformee STS <= 80Mhz: 3 Beamformee STS > 80Mhz: 3 Ng = 16 SU Feedback Ng = 16 MU Feedback Codebook Size SU Feedback Codebook Size MU Feedback PPE Threshold Present HE RX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: not supported 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE TX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: not supported 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported PPE Threshold 0xb9 0x18 0x0e 0x03 Bitrates (non-HT):
  - 1.0 Mbps (short preamble supported)
  - 2.0 Mbps (short preamble supported)
  - 5.5 Mbps (short preamble supported)
  - 11.0 Mbps (short preamble supported)
  - 6.0 Mbps
  - 9.0 Mbps
  - 12.0 Mbps
  - 18.0 Mbps
  - 24.0 Mbps
  - 36.0 Mbps
  - 48.0 Mbps
  - 54.0 Mbps Frequencies:
  - 2412 MHz [1] (20.0 dBm)
  - 2417 MHz [2] (20.0 dBm)
  - 2422 MHz [3] (20.0 dBm)
  - 2427 MHz [4] (20.0 dBm)
  - 2432 MHz [5] (20.0 dBm)
  - 2437 MHz [6] (20.0 dBm)
  - 2442 MHz [7] (20.0 dBm)
  - 2447 MHz [8] (20.0 dBm)
  - 2452 MHz [9] (20.0 dBm)
  - 2457 MHz [10] (20.0 dBm)
  - 2462 MHz [11] (20.0 dBm)
  - 2467 MHz [12] (20.0 dBm) (no IR)
  - 2472 MHz [13] (20.0 dBm) (no IR)
  - 2484 MHz [14] (20.0 dBm) (no IR) Supported commands:
- new_interface
- set_interface
- new_key
- start_ap
- new_station
- set_bss
- authenticate
- associate
- deauthenticate
- disassociate
- join_ibss
- remain_on_channel
- set_tx_bitrate_mask
- frame
- frame_wait_cancel
- set_wiphy_netns
- set_channel
- set_wds_peer
- tdls_mgmt
- tdls_oper
- probe_client
- set_noack_map
- register_beacons
- start_p2p_device
- set_mcast_rate
- testmode
- connect
- disconnect
- channel_switch
- set_qos_map
- set_multicast_to_unicast software interface modes (can always be added):
- AP/VLAN
- monitor valid interface combinations:
- { IBSS } <= 1, #{ managed, AP } <= 4,
```
       total <= 4, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz }
```
  HT Capability overrides:
- MCS: ff ff ff ff ff ff ff ff ff ff
- maximum A-MSDU length
- supported channel width
- short GI for 40 MHz
- max A-MPDU length exponent
- min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. Device supports SAE with AUTHENTICATE command Device supports low priority scan. Device supports scan flush. Device supports AP scan. Device supports per-vif TX power setting Driver supports full state transitions for AP/GO clients Driver supports a userspace MPM Device supports active monitor (which will ACK incoming frames) Device supports configuring vdev MAC-addr on create. max # scan plans: 1 max scan plan interval: -1 max scan plan iterations: 0 Supported TX frame types:
- IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types:
- IBSS: 0x40 0xb0 0xc0 0xd0
- managed: 0x40 0xb0 0xd0
- AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- mesh point: 0xb0 0xc0 0xd0
- P2P-client: 0x40 0xd0
- P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- P2P-device: 0x40 0xd0 Supported extended features:
[ FILS_STA ]: STA FILS (Fast Initial Link Setup)
[ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
[ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
[ TXQS ]: FQ-CoDel-enabled intermediate TXQs
[ AIRTIME_FAIRNESS ]: airtime fairness scheduling
[ AQL ]: Airtime Queue Limits (AQL)
[ SCAN_RANDOM_SN ]: use random sequence numbers in scans
[ SCAN_MIN_PREQ_CONTENT ]: use probe request with only rate IEs in scans
[ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
[ DEL_IBSS_STA ]: deletion of IBSS station support
[ SCAN_FREQ_KHZ ]: scan on kHz frequency support
[ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support **But in my case both are 2.4GHz** and I find out in driver eeprom(eeprom.c) is executing 2G switch case of mt7915e driver And if I change theval to 5G **[ 177.129650] mt7915e 0000:01:00.0: Message 70 (seq 2) timeout** print is coming ethtool -i wlan0
driver: mt7915e version: 5.10.0-xilinx-v2021.2 firmware-version: DEV_000000-20220929104205 expansion-rom-version: bus-info: 0000:01:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no`

openwrt / mt76

AW7915-BMD is not working with 5GHz #901

{ IBSS } <= 1, #{ managed, AP } <= 4,

{ IBSS } <= 1, #{ managed, AP } <= 4,