search

openwrt / openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
Other
20.07k stars 10.42k forks source link

NanoPi R1: Unstable booting #11104

Closed AiyionPrime closed 1 year ago

AiyionPrime commented 1 year ago

As @goligo and me were looking at the NanoPi R1 a few days ago, we found it does not boot with recent snapshots, but does with older releases, such the latest 21.x ones.

I found the commit to introduce the problem was abd67de9f0d6470ba48f6df635db29ce91855397 after bisecting it. The boot fails in about five out of six times for every build afterwords.

After mentioning it oftc/#openwrt-devel @hauke suggested to remove the clockfrequency from the uboot-config:

00:16 aiyion: this looks strange: cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 480000 KHz, changing to: 648000 KHz 00:17 I think the U-Boot configuration is broken, see package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch 00:17 Could you remove this line please: CONFIG_SYS_CLK_FREQ=480000000 00:19 aiyion: please create a ticket for this problem with your logs attached

Which appears to solve the problem or get rid of the symptom.

The device does still not boot reliably, but that's due to it waiting for a blockdevice it might mix up, an issue I'll open in a moment.

For completeness these are the two possible boot-outcomes after @hauke's suggestion.

https://aiyionpri.me/shared/sunxi_boot/screenlog_0.0 (sd-card mixed up)

U-Boot SPL 2020.04 (Oct 25 2021 - 20:28:07 +0000)
DRAM: 1024 MiB
Trying to boot from MMC1

U-Boot 2020.04 (Oct 25 2021 - 20:28:07 +0000) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: FriendlyARM NanoPi R1
DRAM:  1 GiB
MMC:   Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... Unable to use mmc 1:0... In:    serial
Out:   serial
Err:   serial
Net:   phy interface7

Error: ethernet@1c30000 address not set.
No ethernet found.

starting USB...
Bus usb@1c1b000: USB EHCI 1.00
Bus usb@1c1b400: USB OHCI 1.0
Bus usb@1c1c000: USB EHCI 1.00
Bus usb@1c1c400: USB OHCI 1.0
Bus usb@1c1d000: USB EHCI 1.00
Bus usb@1c1d400: USB OHCI 1.0
scanning bus usb@1c1b000 for devices... 2 USB Device(s) found
scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
scanning bus usb@1c1c000 for devices... 1 USB Device(s) found
scanning bus usb@1c1c400 for devices... 1 USB Device(s) found
scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
scanning bus usb@1c1d400 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
377 bytes read in 1 ms (368.2 KiB/s)
## Executing script at 43100000
3436400 bytes read in 160 ms (20.5 MiB/s)
23062 bytes read in 4 ms (5.5 MiB/s)
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   ARM OpenWrt Linux-5.10.75
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3436336 Bytes = 3.3 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
   Loading Kernel Image
   Using Device Tree in place at 43000000, end 43008a15

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.75 (aiyion@sideswipe) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.2.0 r17749-c
1685d92e4) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Mon Oct 25 20:28:07 2021
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: FriendlyARM NanoPi R1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
[    0.000000]   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 15 pages/cpu s30604 r8192 d22644 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260416
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1024844K/1048576K available (7262K kernel code, 820K rwdata, 1924K rodata, 2048K init, 253K bss, 23732K reserved, 0K cma-reserved, 262132K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x368/0x518 with crng_init=0
[    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000020] Switching to timer-based delay loop, resolution 41ns
[    0.000159] Console: colour dummy device 80x30
[    0.000213] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000232] pid_max: default: 32768 minimum: 301
[    0.000380] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000397] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001344] CPU: Testing write buffer coherency: ok
[    0.001687] /cpus/cpu@0 missing clock-frequency property
[    0.001712] /cpus/cpu@1 missing clock-frequency property
[    0.001731] /cpus/cpu@2 missing clock-frequency property
[    0.001750] /cpus/cpu@3 missing clock-frequency property
[    0.001762] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002330] Setting up static identity map for 0x40200000 - 0x40200060
[    0.002453] rcu: Hierarchical SRCU implementation.
[    0.002610] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.002962] smp: Bringing up secondary CPUs ...
[    0.013734] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.024584] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.035348] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.035439] smp: Brought up 1 node, 4 CPUs
[    0.035467] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.035474] CPU: All CPU(s) started in HYP mode.
[    0.035481] CPU: Virtualization extensions available.
[    0.040808] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.041062] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.041087] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.041400] pinctrl core: initialized pinctrl subsystem
[    0.042679] NET: Registered protocol family 16
[    0.043282] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.044831] thermal_sys: Registered thermal governor 'step_wise'
[    0.045365] No ATAGs?
[    0.077642] SCSI subsystem initialized
[    0.078313] usbcore: registered new interface driver usbfs
[    0.078408] usbcore: registered new interface driver hub
[    0.078482] usbcore: registered new device driver usb
[    0.078913] pps_core: LinuxPPS API ver. 1 registered
[    0.078934] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.078973] PTP clock support registered
[    0.079330] Advanced Linux Sound Architecture Driver Initialized.
[    0.080675] clocksource: Switched to clocksource arch_sys_counter
[    0.087356] NET: Registered protocol family 2
[    0.087592] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.088662] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.088712] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.088787] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.088903] TCP: Hash tables configured (established 8192 bind 8192)
[    0.089036] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.089110] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.089369] NET: Registered protocol family 1
[    0.091488] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.095639] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.095758] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.096756] bounce: pool size: 64 pages
[    0.103330] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.105275] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.113570] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.115485] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[    0.116108] printk: console [ttyS0] disabled
[    0.116218] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 47, base_baud = 1500000) is a 16550A
[    0.721645] printk: console [ttyS0] enabled
[    0.732376] loop: module loaded
[    0.737226] libphy: Fixed MDIO Bus: probed
[    0.742744] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
[    0.751463] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[    0.757817] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[    0.764713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.771271] ehci-platform: EHCI generic platform driver
[    0.776853] ehci-platform 1c1b000.usb: EHCI Host Controller
[    0.782477] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
[    0.790378] ehci-platform 1c1b000.usb: irq 36, io mem 0x01c1b000
[    0.820668] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    0.826979] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    0.835262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.842492] usb usb1: Product: EHCI Host Controller
[    0.847367] usb usb1: Manufacturer: Linux 5.10.75 ehci_hcd
[    0.852865] usb usb1: SerialNumber: 1c1b000.usb
[    0.857888] hub 1-0:1.0: USB hub found
[    0.861724] hub 1-0:1.0: 1 port detected
[    0.866533] ehci-platform 1c1c000.usb: EHCI Host Controller
[    0.872186] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    0.880074] ehci-platform 1c1c000.usb: irq 38, io mem 0x01c1c000
[    0.910674] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    0.916946] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    0.925219] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.932442] usb usb2: Product: EHCI Host Controller
[    0.937317] usb usb2: Manufacturer: Linux 5.10.75 ehci_hcd
[    0.942806] usb usb2: SerialNumber: 1c1c000.usb
[    0.947777] hub 2-0:1.0: USB hub found
[    0.951597] hub 2-0:1.0: 1 port detected
[    0.956364] ehci-platform 1c1d000.usb: EHCI Host Controller
[    0.961984] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 3
[    0.969861] ehci-platform 1c1d000.usb: irq 40, io mem 0x01c1d000
[    1.000671] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    1.006935] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.015208] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.022431] usb usb3: Product: EHCI Host Controller
[    1.027304] usb usb3: Manufacturer: Linux 5.10.75 ehci_hcd
[    1.032793] usb usb3: SerialNumber: 1c1d000.usb
[    1.037746] hub 3-0:1.0: USB hub found
[    1.041553] hub 3-0:1.0: 1 port detected
[    1.046147] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.052387] ohci-platform: OHCI generic platform driver
[    1.057992] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    1.064663] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
[    1.072566] ohci-platform 1c1b400.usb: irq 37, io mem 0x01c1b400
[    1.144848] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    1.150670] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    1.153124] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.167278] usb usb4: Product: Generic Platform OHCI controller
[    1.173202] usb usb4: Manufacturer: Linux 5.10.75 ohci_hcd
[    1.178686] usb usb4: SerialNumber: 1c1b400.usb
[    1.183701] hub 4-0:1.0: USB hub found
[    1.187499] hub 4-0:1.0: 1 port detected
[    1.192278] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    1.198918] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 5
[    1.206830] ohci-platform 1c1c400.usb: irq 39, io mem 0x01c1c400
[    1.284844] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    1.293124] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.300339] usb usb5: Product: Generic Platform OHCI controller
[    1.306265] usb usb5: Manufacturer: Linux 5.10.75 ohci_hcd
[    1.311759] usb usb5: SerialNumber: 1c1c400.usb
[    1.316737] hub 5-0:1.0: USB hub found
[    1.320548] hub 5-0:1.0: 1 port detected
[    1.325323] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    1.332001] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 6
[    1.339874] ohci-platform 1c1d400.usb: irq 41, io mem 0x01c1d400
[    1.352061] usb 1-1: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
[    1.360236] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.367385] usb 1-1: Product: USB 10/100 LAN
[    1.371663] usb 1-1: Manufacturer: Realtek
[    1.375756] usb 1-1: SerialNumber: 000000000000
[    1.414850] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    1.423147] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.430362] usb usb6: Product: Generic Platform OHCI controller
[    1.436285] usb usb6: Manufacturer: Linux 5.10.75 ohci_hcd
[    1.441777] usb usb6: SerialNumber: 1c1d400.usb
[    1.446730] hub 6-0:1.0: USB hub found
[    1.450523] hub 6-0:1.0: 1 port detected
[    1.455332] usbcore: registered new interface driver usb-storage
[    1.461987] mousedev: PS/2 mouse device common for all mice
[    1.468089] i2c /dev entries driver
[    1.473214] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.481704] sun8i-h3-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
[    1.491487] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    1.491496] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
[    1.491991] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
[    1.492538] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    1.495342] NET: Registered protocol family 10
[    1.496277] Segment Routing with IPv6
[    1.496349] NET: Registered protocol family 17
[    1.496505] can: controller area network core
[    1.496565] NET: Registered protocol family 29
[    1.496571] 8021q: 802.1Q VLAN Support v1.8
[    1.496687] Registering SWP/SWPB emulation handler
[    1.503840] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.507059] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
[    1.508344] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[    1.508352] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[    1.508737] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    1.517881] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
[    1.522190] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 50006 (expect 58000)
[    1.533391] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
[    1.540697] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    1.558007] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.601613] mmc1: host does not support reading read-only switch, assuming write-enable
[    1.608253] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.612910] mmc2: new DDR MMC card at address 0001
[    1.613910] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB 
[    1.627381] mmc1: new high speed SDHC card at address aaaa
[    1.633398] mmcblk2boot0: mmc2:0001 8GTF4R partition 1 4.00 MiB
[    1.642232] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.648276] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[    1.648546] mmcblk2boot1: mmc2:0001 8GTF4R partition 2 4.00 MiB
[    1.648804] mmcblk1: mmc1:aaaa SR32G 29.7 GiB 
[    1.651305]  mmcblk1: p1 p2
[    1.656371] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.659154] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[    1.669659] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[    1.672330] dwmac-sun8i 1c30000.ethernet: COE Type 2
[    1.699995] random: fast init done
[    1.702666] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[    1.712835] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[    1.718489] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[    1.724162] dwmac-sun8i 1c30000.ethernet: device MAC address 9e:59:09:d0:a2:9c
[    1.731921] libphy: stmmac: probed
[    1.736884] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
[    1.743530] libphy: mdio_mux: probed
[    1.747136] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
[    1.753515] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
[    1.760741] libphy: mdio_mux: probed
[    1.764344] dwmac-sun8i 1c30000.ethernet: Switch mux to external PHY
[    1.765645] mmc0: new high speed SDIO card at address 0001
[    1.775016] ALSA device list:
[    1.779172]   No soundcards found.
[    1.783044] Waiting for root device /dev/mmcblk0p2...
[   31.840676] vcc3v0: disabling
[   31.843659] vcc5v0: disabling

https://aiyionpri.me/shared/sunxi_boot/screenlog_1.0 (working)

U-Boot SPL 2020.04 (Oct 25 2021 - 20:28:07 +0000)
DRAM: 1024 MiB
Trying to boot from MMC1

U-Boot 2020.04 (Oct 25 2021 - 20:28:07 +0000) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: FriendlyARM NanoPi R1
DRAM:  1 GiB
MMC:   Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... Unable to use mmc 1:0... In:    serial
Out:   serial
Err:   serial
Net:   phy interface7

Error: ethernet@1c30000 address not set.
No ethernet found.

starting USB...
Bus usb@1c1b000: USB EHCI 1.00
Bus usb@1c1b400: USB OHCI 1.0
Bus usb@1c1c000: USB EHCI 1.00
Bus usb@1c1c400: USB OHCI 1.0
Bus usb@1c1d000: USB EHCI 1.00
Bus usb@1c1d400: USB OHCI 1.0
scanning bus usb@1c1b000 for devices... 2 USB Device(s) found
scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
scanning bus usb@1c1c000 for devices... 1 USB Device(s) found
scanning bus usb@1c1c400 for devices... 1 USB Device(s) found
scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
scanning bus usb@1c1d400 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
377 bytes read in 1 ms (368.2 KiB/s)
## Executing script at 43100000
3436400 bytes read in 160 ms (20.5 MiB/s)
23062 bytes read in 4 ms (5.5 MiB/s)
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   ARM OpenWrt Linux-5.10.75
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3436336 Bytes = 3.3 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
   Loading Kernel Image
   Using Device Tree in place at 43000000, end 43008a15

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.75 (aiyion@sideswipe) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.2.0 r17749-c1685d92e4) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Mon Oct 25 20:28:07 2021
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: FriendlyARM NanoPi R1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
[    0.000000]   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 15 pages/cpu s30604 r8192 d22644 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260416
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1024844K/1048576K available (7262K kernel code, 820K rwdata, 1924K rodata, 2048K init, 253K bss, 23732K reserved, 0K cma-reserved, 262132K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x368/0x518 with crng_init=0
[    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000020] Switching to timer-based delay loop, resolution 41ns
[    0.000158] Console: colour dummy device 80x30
[    0.000214] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000234] pid_max: default: 32768 minimum: 301
[    0.000383] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000402] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001355] CPU: Testing write buffer coherency: ok
[    0.001705] /cpus/cpu@0 missing clock-frequency property
[    0.001730] /cpus/cpu@1 missing clock-frequency property
[    0.001748] /cpus/cpu@2 missing clock-frequency property
[    0.001766] /cpus/cpu@3 missing clock-frequency property
[    0.001778] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002350] Setting up static identity map for 0x40200000 - 0x40200060
[    0.002476] rcu: Hierarchical SRCU implementation.
[    0.002631] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.002978] smp: Bringing up secondary CPUs ...
[    0.013745] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.024589] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.035335] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.035426] smp: Brought up 1 node, 4 CPUs
[    0.035453] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.035460] CPU: All CPU(s) started in HYP mode.
[    0.035467] CPU: Virtualization extensions available.
[    0.040813] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.041071] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.041096] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.041411] pinctrl core: initialized pinctrl subsystem
[    0.042688] NET: Registered protocol family 16
[    0.043277] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.044846] thermal_sys: Registered thermal governor 'step_wise'
[    0.045369] No ATAGs?
[    0.076747] SCSI subsystem initialized
[    0.077394] usbcore: registered new interface driver usbfs
[    0.077493] usbcore: registered new interface driver hub
[    0.077569] usbcore: registered new device driver usb
[    0.077997] pps_core: LinuxPPS API ver. 1 registered
[    0.078021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.078056] PTP clock support registered
[    0.078428] Advanced Linux Sound Architecture Driver Initialized.
[    0.079963] clocksource: Switched to clocksource arch_sys_counter
[    0.086702] NET: Registered protocol family 2
[    0.086948] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.088017] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.088068] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.088143] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.088259] TCP: Hash tables configured (established 8192 bind 8192)
[    0.088390] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.088464] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.088713] NET: Registered protocol family 1
[    0.090922] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.095060] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.095182] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.096169] bounce: pool size: 64 pages
[    0.102445] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.104365] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.113115] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.115139] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[    0.115772] printk: console [ttyS0] disabled
[    0.115886] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 47, base_baud = 1500000) is a 16550A
[    0.720991] printk: console [ttyS0] enabled
[    0.731669] loop: module loaded
[    0.736547] libphy: Fixed MDIO Bus: probed
[    0.742081] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
[    0.750795] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[    0.757148] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[    0.764049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.770608] ehci-platform: EHCI generic platform driver
[    0.776196] ehci-platform 1c1b000.usb: EHCI Host Controller
[    0.781815] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
[    0.789713] ehci-platform 1c1b000.usb: irq 36, io mem 0x01c1b000
[    0.819930] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    0.826240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    0.834528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.841757] usb usb1: Product: EHCI Host Controller
[    0.846631] usb usb1: Manufacturer: Linux 5.10.75 ehci_hcd
[    0.852125] usb usb1: SerialNumber: 1c1b000.usb
[    0.857143] hub 1-0:1.0: USB hub found
[    0.860974] hub 1-0:1.0: 1 port detected
[    0.865789] ehci-platform 1c1c000.usb: EHCI Host Controller
[    0.871437] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    0.879324] ehci-platform 1c1c000.usb: irq 38, io mem 0x01c1c000
[    0.909935] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    0.916211] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    0.924490] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.931715] usb usb2: Product: EHCI Host Controller
[    0.936589] usb usb2: Manufacturer: Linux 5.10.75 ehci_hcd
[    0.942084] usb usb2: SerialNumber: 1c1c000.usb
[    0.947060] hub 2-0:1.0: USB hub found
[    0.950880] hub 2-0:1.0: 1 port detected
[    0.955620] ehci-platform 1c1d000.usb: EHCI Host Controller
[    0.961258] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 3
[    0.969158] ehci-platform 1c1d000.usb: irq 40, io mem 0x01c1d000
[    0.999931] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    1.006202] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.014478] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.021705] usb usb3: Product: EHCI Host Controller
[    1.026578] usb usb3: Manufacturer: Linux 5.10.75 ehci_hcd
[    1.032069] usb usb3: SerialNumber: 1c1d000.usb
[    1.037027] hub 3-0:1.0: USB hub found
[    1.040854] hub 3-0:1.0: 1 port detected
[    1.045453] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.051699] ohci-platform: OHCI generic platform driver
[    1.057304] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    1.063976] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
[    1.071885] ohci-platform 1c1b400.usb: irq 37, io mem 0x01c1b400
[    1.144118] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    1.149934] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    1.152401] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.166554] usb usb4: Product: Generic Platform OHCI controller
[    1.172479] usb usb4: Manufacturer: Linux 5.10.75 ohci_hcd
[    1.177964] usb usb4: SerialNumber: 1c1b400.usb
[    1.182987] hub 4-0:1.0: USB hub found
[    1.186790] hub 4-0:1.0: 1 port detected
[    1.191591] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    1.198230] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 5
[    1.206140] ohci-platform 1c1c400.usb: irq 39, io mem 0x01c1c400
[    1.284110] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    1.292391] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.299605] usb usb5: Product: Generic Platform OHCI controller
[    1.305530] usb usb5: Manufacturer: Linux 5.10.75 ohci_hcd
[    1.311025] usb usb5: SerialNumber: 1c1c400.usb
[    1.316007] hub 5-0:1.0: USB hub found
[    1.319816] hub 5-0:1.0: 1 port detected
[    1.324583] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    1.331258] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 6
[    1.339130] ohci-platform 1c1d400.usb: irq 41, io mem 0x01c1d400
[    1.351393] usb 1-1: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
[    1.359567] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.366718] usb 1-1: Product: USB 10/100 LAN
[    1.370996] usb 1-1: Manufacturer: Realtek
[    1.375089] usb 1-1: SerialNumber: 000000000000
[    1.424131] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    1.432429] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.439644] usb usb6: Product: Generic Platform OHCI controller
[    1.445567] usb usb6: Manufacturer: Linux 5.10.75 ohci_hcd
[    1.451056] usb usb6: SerialNumber: 1c1d400.usb
[    1.456007] hub 6-0:1.0: USB hub found
[    1.459801] hub 6-0:1.0: 1 port detected
[    1.464615] usbcore: registered new interface driver usb-storage
[    1.471230] mousedev: PS/2 mouse device common for all mice
[    1.477328] i2c /dev entries driver
[    1.482428] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.490908] sun8i-h3-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
[    1.500736] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
[    1.500742] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    1.501068] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
[    1.501487] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
[    1.510143] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    1.517731] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.522424] NET: Registered protocol family 10
[    1.526886] Segment Routing with IPv6
[    1.535491] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
[    1.539978] NET: Registered protocol family 17
[    1.549956] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
[    1.552649] can: controller area network core
[    1.559961] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    1.563929] NET: Registered protocol family 29
[    1.585127] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.586592] 8021q: 802.1Q VLAN Support v1.8
[    1.593581] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.596372] Registering SWP/SWPB emulation handler
[    1.603228] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.606923] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.616704] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
[    1.622338] mmc1: new DDR MMC card at address 0001
[    1.622501] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.623382] mmc0: new high speed SDHC card at address aaaa
[    1.625845] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[    1.630071] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[    1.634569] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
[    1.634580] mmcblk0: mmc0:aaaa SR32G 29.7 GiB 
[    1.638865] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[    1.639238] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    1.645190]  mmcblk0: p1 p2
[    1.645231] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
[    1.645742] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
[    1.649939] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 50006 (expect 58000)
[    1.702715] random: fast init done
[    1.765488] mmc2: new high speed SDIO card at address 0001
[    1.770143] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[    1.778202] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[    1.785466] dwmac-sun8i 1c30000.ethernet: COE Type 2
[    1.790441] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[    1.797224] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[    1.802885] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[    1.808550] dwmac-sun8i 1c30000.ethernet: device MAC address ee:39:93:44:77:28
[    1.816289] libphy: stmmac: probed
[    1.821367] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
[    1.827954] libphy: mdio_mux: probed
[    1.831583] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
[    1.837941] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
[    1.845183] libphy: mdio_mux: probed
[    1.848786] dwmac-sun8i 1c30000.ethernet: Switch mux to external PHY
[    1.859237] ALSA device list:
[    1.862263]   No soundcards found.
[    1.872485] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[    1.882256] Freeing unused kernel memory: 2048K
[    1.950119] Run /sbin/init as init process
[    2.157782] init: Console is alive
[    2.161568] init: - watchdog -
[    2.383379] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.431004] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.447816] init: - preinit -
[    3.020922] random: jshn: uninitialized urandom read (4 bytes read)
[    3.088264] random: jshn: uninitialized urandom read (4 bytes read)
[    3.121399] random: jshn: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    7.378116] urandom_read: 4 callbacks suppressed
[    7.378126] random: procd: uninitialized urandom read (4 bytes read)
[    7.411401] mount_root: overlay filesystem in /dev/loop0 has not been formatted yet
[    7.544107] random: mkfs.f2fs: uninitialized urandom read (16 bytes read)
[    7.847072] F2FS-fs (loop0): Found nat_bits in checkpoint
[    7.865527] F2FS-fs (loop0): Mounted with checkpoint version = 8f5dc87
[    7.872904] mount_root: overlay filesystem has not been fully initialized yet
[    7.880745] mount_root: switching to f2fs overlay
[    7.961301] urandom-seed: Seed file not found (/etc/urandom.seed)
[    8.043864] procd: - early -
[    8.046908] procd: - watchdog -
[    8.631099] procd: - watchdog -
[    8.634764] procd: - ubus -
[    8.654938] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.690319] procd: - init -
Please press Enter to activate this console.
[    9.035802] kmodloader: loading kernel modules from /etc/modules.d/*
[    9.056452] Loading modules backported from Linux version v5.15-rc6-0-g519d81956ee2
[    9.064190] Backport generated by backports.git v5.15-rc6-1-0-gd44432d6
[    9.071956] urngd: v1.0.2 started.
[    9.079490] usbcore: registered new interface driver r8152
[    9.099843] xt_time: kernel timezone is -0000
[    9.105434] usbcore: registered new interface driver cdc_ether
[    9.112872] usbcore: registered new interface driver cdc_ncm
[    9.137943] PPP generic driver version 2.4.2
[    9.142501] random: crng init done
[    9.143510] NET: Registered protocol family 24
[    9.164235] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    9.178397] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.friendlyarm,nanopi-r1.bin failed with error -2
[    9.190082] brcmfmac mmc2:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43430-sdio.friendlyarm,nanopi-r1.bin
[    9.244680] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin failed with error -2
[    9.254469] brcmfmac mmc2:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43430-sdio.bin
[    9.270160] usb 1-1: reset high-speed USB device number 2 using ehci-platform
[    9.521552] r8152 1-1:1.0: skip request firmware
[    9.526523] r8152 1-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[    9.535687] r8152 1-1:1.0 (unnamed net_device) (uninitialized): Random ether addr 16:bd:7a:35:6c:f4
[    9.591511] r8152 1-1:1.0 eth1: v1.11.11
[   14.240304] usbcore: registered new interface driver brcmfmac
[   14.249803] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.269742] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[   31.935793] br-lan: port 1(eth1) entered blocking state
[   31.941182] br-lan: port 1(eth1) entered disabled state
[   31.946714] device eth1 entered promiscuous mode
[   31.954451] br-lan: port 1(eth1) entered blocking state
[   31.959690] br-lan: port 1(eth1) entered forwarding state
[   31.979891] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.2:07] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
[   31.990948] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
[   31.998304] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
[   32.006305] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[   32.014193] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/rgmii link mode
[   32.479952] vcc3v0: disabling
[   32.482953] vcc5v0: disabling
[   32.960211] br-lan: port 1(eth1) entered disabled state

BusyBox v1.34.1 (2021-10-29 13:16:30 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r17856-abd67de9f0
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/#

They appear about half of the time each, though the sample quantity is fairly limited.

linxcow commented 1 year ago

I think i have the same problem , new nanopi R1 => older friendlywrt works ( giving out ip on wired device ) openwrt 22.03.2 images dont give out ip's tested with multiple cards. Is there a fix ?

AiyionPrime commented 1 year ago

Technically this is at least two issues; the frequency problem is soveable, as @hauke suggested.for the blockdevice mixup I have not found a solution, yet.

AiyionPrime commented 1 year ago

Maybe I'll just start with a patch for the first issue so the problems get less...

linxcow commented 1 year ago

I can confirm that 21.03.5 hands out ip over lan wired . So probably only 22.x.x affected

AiyionPrime commented 1 year ago

Yep, that's true. I think I found the kernel upgrade to 5.10 to be the introducing commit.

linxcow commented 1 year ago

will your patch be included in the builds or do I have to do this myself ( no experience )

AiyionPrime commented 1 year ago

@linxcow I submitted the patch, you could help get it merged by verifying it resolves the first issue [1]. On the right, there is a is a button called "mbox" which will download the patch. You can then apply it in your local OpenWrt environment and build an image with it.

[1] https://patchwork.ozlabs.org/project/openwrt/patch/20221211130446.23492-1-git@aiyionpri.me/

linxcow commented 1 year ago

Sorry i need more steps , i guess i will have to create a build environment on a linux system to be able to do that?

AiyionPrime commented 1 year ago

Indeed. There are several pages around this in the wiki, but this should give you an idea, what tools you need to build OpenWrt on eg. Ubuntu or Debian: https://openwrt.org/docs/guide-developer/toolchain/install-buildsystem#debianubuntu

Afterwords you'd clone the OpenWrt Repo, download our patch, apply it using git and build it, which might take a while depending on your system. (Takes about an hour and a half on my laptop...)

I hope this list of steps is complete, but I have not tested it: If you encounter any errors, stop immediately, do not continue with the next step. Maybe that's obvious to you but I've dealt with far to many people that ignored problems during builds an wondered why it failed afterwords :)

# install ubuntu/debian dependencies
sudo apt update
sudo apt install build-essential clang flex g++ gawk gcc-multilib gettext \
git libncurses5-dev libssl-dev python3-distutils rsync unzip zlib1g-dev \
file wget

# clone the repo
git clone https://git.openwrt.org/openwrt/openwrt.git

# change into that new directory
cd openwrt

# download the patch
wget https://patchwork.ozlabs.org/project/openwrt/patch/20221211130446.23492-1-git@aiyionpri.me/mbox/ -o nanopi_frequency_fix.patch

# apply the patch
git am nanopi_frequency_fix.patch

# start build preparations
./scripts/feeds update -a
./scripts/feeds install -a

# choose the correct device, this looks harder than it is. It will open an interactive interface in which you select what device you want to build an image for.

# simply choose the following from the dropdown menus:
* Target System: `Allwinner A1x/A20/A3x/H3/H5/R4`
* Subtarget: `Allwinner A20/A3x/H3/R40`
* Target Profile: `FriendlyARM NanoPi R1`
* choose `save` afterwords and after saving `exit`

make menuconfig

# you just prepared the buildconfig, good job.
# find out how many cores you have to efficiently speed up the following build:

cat /proc/cpuinfo | grep processor | wc -l 

# this shout have returned a number that tells how many cpu cores are there in your system.
# for me its four. Add one to the number (that gives 5 for my laptop.)

# call `make -j` with your calculated number. This will take a while.
make -j5

# done? your images are in the directory `bin/targets/sunxi/cortexa7`.
AiyionPrime commented 1 year ago

@linxcow The second part of the issue is this patch, I think.

https://patchwork.ozlabs.org/project/openwrt/patch/20221215141833.100172-1-git@aiyionpri.me/

Testing it would be highly appreciated, at least for me this resolves all above issues.

linxcow commented 1 year ago

@AiyionPrime Thx , Ill' try to find some time to spin up a virtual machine and prepare a build environment this weekend.

stintel commented 1 year ago

Should be solved by bf06a7c865531cf20735cbdfac46d4947fcc18a6.

n-pat commented 1 year ago

I can confirm that it boots without issues regarding the "cpu frequency". Also "boot drive alias" seems to work, definitley loads the root 179:26 mmcblk2p2 (seen in dmesg; a 64 GB SD card).

I can login using SSH. uhttpd missing, but this is as expected now with the prebuilt images as I found out.

I tried using the snapshot from today (2023-01-02) and also a self build image as described in the postings above (patches were not neccessary anymore as it seems everything is available in master in the meantime).

For later reference I add some log output:

root@OpenWrt:~# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/loop0 on /overlay type f2fs (rw,lazytime,noatime,background_gc=on,discard,no_heap,user_xattr,inline_xattr,inline_data,inline_dentry,flush_merge,extent_cache,mode=adaptive,active_logs=6,alloc_mode=reuse,fsync_mode=posix)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,noexec,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
none on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,noatime,mode=700)

root@OpenWrt:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                 4096      4096         0 100% /rom
tmpfs                   513444        68    513376   0% /tmp
/dev/loop0              100544     59672     40872  59% /overlay
overlayfs:/overlay      100544     59672     40872  59% /
tmpfs                      512         0       512   0% /dev

root@OpenWrt:~# cat /proc/partitions
major minor  #blocks  name

   7        0     102592 loop0
 179        0    7634944 mmcblk0
 179        1      40960 mmcblk0p1
 179        2     286720 mmcblk0p2
 179        3    7282688 mmcblk0p3
 179       24   62367744 mmcblk2
 179       25      20480 mmcblk2p1
 179       26     106496 mmcblk2p2

root@OpenWrt:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.161 (patrick@68fde9461457) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.3.0 r21657-9260027535) 11.3.0, GNU ld (GNU Binutils) 2.39) #0 SMP Mon Jan 2 09:18:44 2023
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: FriendlyARM NanoPi R1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
[    0.000000]   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] On node 0 totalpages: 262144
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:63
[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 15 pages/cpu s30732 r8192 d22516 u61440
[    0.000000] pcpu-alloc: s30732 r8192 d22516 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260416
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=PARTUUID=5452574f-02 rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1024840K/1048576K available (7274K kernel code, 827K rwdata, 1924K rodata, 2048K init, 248K bss, 23736K reserved, 0K cma-reserved, 262132K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000020] Switching to timer-based delay loop, resolution 41ns
[    0.000240] Console: colour dummy device 80x30
[    0.000300] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000319] pid_max: default: 32768 minimum: 301
[    0.000469] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000487] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001439] CPU: Testing write buffer coherency: ok
[    0.001851] /cpus/cpu@0 missing clock-frequency property
[    0.001876] /cpus/cpu@1 missing clock-frequency property
[    0.001895] /cpus/cpu@2 missing clock-frequency property
[    0.001913] /cpus/cpu@3 missing clock-frequency property
[    0.001925] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002650] Setting up static identity map for 0x40200000 - 0x40200060
[    0.002793] rcu: Hierarchical SRCU implementation.
[    0.002988] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.003430] smp: Bringing up secondary CPUs ...
[    0.014278] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.025227] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.036076] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.036167] smp: Brought up 1 node, 4 CPUs
[    0.036194] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.036202] CPU: All CPU(s) started in HYP mode.
[    0.036208] CPU: Virtualization extensions available.
[    0.041779] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.042042] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.042070] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.042372] pinctrl core: initialized pinctrl subsystem
[    0.044149] NET: Registered protocol family 16
[    0.044577] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.046058] thermal_sys: Registered thermal governor 'step_wise'
[    0.046572] No ATAGs?
[    0.080190] SCSI subsystem initialized
[    0.080507] libata version 3.00 loaded.
[    0.080859] usbcore: registered new interface driver usbfs
[    0.080961] usbcore: registered new interface driver hub
[    0.081052] usbcore: registered new device driver usb
[    0.081461] pps_core: LinuxPPS API ver. 1 registered
[    0.081483] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.081520] PTP clock support registered
[    0.081908] Advanced Linux Sound Architecture Driver Initialized.
[    0.083352] clocksource: Switched to clocksource arch_sys_counter
[    0.090131] NET: Registered protocol family 2
[    0.090476] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.091751] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.091818] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.091897] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.092014] TCP: Hash tables configured (established 8192 bind 8192)
[    0.092159] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.092237] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.092555] NET: Registered protocol family 1
[    0.094763] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.098966] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.099086] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.100125] bounce: pool size: 64 pages
[    0.106629] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.108553] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.116998] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.118942] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[    0.119570] printk: console [ttyS0] disabled
[    0.139780] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 47, base_baud = 1500000) is a U6_16550A
[    0.738362] printk: console [ttyS0] enabled
[    0.749188] loop: module loaded
[    0.756074] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
[    0.764828] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[    0.771189] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[    0.778175] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.784742] ehci-platform: EHCI generic platform driver
[    0.790324] ehci-platform 1c1b000.usb: EHCI Host Controller
[    0.795946] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
[    0.803861] ehci-platform 1c1b000.usb: irq 36, io mem 0x01c1b000
[    0.833340] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    0.839653] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    0.847949] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.855187] usb usb1: Product: EHCI Host Controller
[    0.860055] usb usb1: Manufacturer: Linux 5.10.161 ehci_hcd
[    0.865630] usb usb1: SerialNumber: 1c1b000.usb
[    0.870682] hub 1-0:1.0: USB hub found
[    0.874527] hub 1-0:1.0: 1 port detected
[    0.879373] ehci-platform 1c1c000.usb: EHCI Host Controller
[    0.885032] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[    0.892920] ehci-platform 1c1c000.usb: irq 38, io mem 0x01c1c000
[    0.923353] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    0.929621] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    0.937901] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.945129] usb usb2: Product: EHCI Host Controller
[    0.950003] usb usb2: Manufacturer: Linux 5.10.161 ehci_hcd
[    0.955577] usb usb2: SerialNumber: 1c1c000.usb
[    0.960687] hub 2-0:1.0: USB hub found
[    0.964519] hub 2-0:1.0: 1 port detected
[    0.969307] ehci-platform 1c1d000.usb: EHCI Host Controller
[    0.974932] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 3
[    0.982822] ehci-platform 1c1d000.usb: irq 40, io mem 0x01c1d000
[    1.013356] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    1.019632] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.027907] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.035129] usb usb3: Product: EHCI Host Controller
[    1.040004] usb usb3: Manufacturer: Linux 5.10.161 ehci_hcd
[    1.045578] usb usb3: SerialNumber: 1c1d000.usb
[    1.050552] hub 3-0:1.0: USB hub found
[    1.054364] hub 3-0:1.0: 1 port detected
[    1.058962] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.065201] ohci-platform: OHCI generic platform driver
[    1.070801] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    1.077462] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
[    1.085363] ohci-platform 1c1b400.usb: irq 37, io mem 0x01c1b400
[    1.157530] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    1.163345] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    1.165805] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.179965] usb usb4: Product: Generic Platform OHCI controller
[    1.185895] usb usb4: Manufacturer: Linux 5.10.161 ohci_hcd
[    1.191467] usb usb4: SerialNumber: 1c1b400.usb
[    1.196492] hub 4-0:1.0: USB hub found
[    1.200294] hub 4-0:1.0: 1 port detected
[    1.205095] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    1.211746] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 5
[    1.219672] ohci-platform 1c1c400.usb: irq 39, io mem 0x01c1c400
[    1.297525] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    1.305805] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.313010] usb usb5: Product: Generic Platform OHCI controller
[    1.318935] usb usb5: Manufacturer: Linux 5.10.161 ohci_hcd
[    1.324517] usb usb5: SerialNumber: 1c1c400.usb
[    1.329511] hub 5-0:1.0: USB hub found
[    1.333349] hub 5-0:1.0: 1 port detected
[    1.338113] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    1.344791] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 6
[    1.352671] ohci-platform 1c1d400.usb: irq 41, io mem 0x01c1d400
[    1.364771] usb 1-1: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
[    1.372944] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.380095] usb 1-1: Product: USB 10/100 LAN
[    1.384373] usb 1-1: Manufacturer: Realtek
[    1.388466] usb 1-1: SerialNumber: 000000000000
[    1.437545] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    1.445837] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.453051] usb usb6: Product: Generic Platform OHCI controller
[    1.458975] usb usb6: Manufacturer: Linux 5.10.161 ohci_hcd
[    1.464551] usb usb6: SerialNumber: 1c1d400.usb
[    1.469533] hub 6-0:1.0: USB hub found
[    1.473343] hub 6-0:1.0: 1 port detected
[    1.478140] usbcore: registered new interface driver usb-storage
[    1.484799] mousedev: PS/2 mouse device common for all mice
[    1.490762] i2c /dev entries driver
[    1.495857] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.504348] sun8i-h3-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
[    1.514157] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
[    1.514181] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    1.514237] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
[    1.514414] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
[    1.519285] NET: Registered protocol family 10
[    1.520828] Segment Routing with IPv6
[    1.520906] NET: Registered protocol family 17
[    1.521204] can: controller area network core
[    1.521272] NET: Registered protocol family 29
[    1.521278] 8021q: 802.1Q VLAN Support v1.8
[    1.521404] Registering SWP/SWPB emulation handler
[    1.524373] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    1.531521] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
[    1.540789] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
[    1.548136] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.549406] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[    1.549415] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[    1.549805] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    1.549838] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 50006 (expect 58000)
[    1.563371] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
[    1.590375] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    1.608312] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.623865] mmc0: new DDR MMC card at address 0001
[    1.655465] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.656124] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[    1.666169] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[    1.672607] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[    1.673738] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[    1.678608] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.685790] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[    1.686254] mmc2: host does not support reading read-only switch, assuming write-enable
[    1.686530]  mmcblk0: p1 p2 p3
[    1.689474] mmc2: new high speed SDXC card at address e624
[    1.690510] mmcblk2: mmc2:e624 SC64G 59.5 GiB
[    1.692485]  mmcblk2: p1 p2
[    1.694004] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.697316] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
[    1.698496] dwmac-sun8i 1c30000.ethernet: COE Type 2
[    1.698509] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[    1.744962] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[    1.750618] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[    1.756313] dwmac-sun8i 1c30000.ethernet: device MAC address 6e:64:20:91:e1:4d
[    1.765653] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
[    1.772309] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
[    1.778694] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
[    1.780633] mmc1: new high speed SDIO card at address 0001
[    1.786031] dwmac-sun8i 1c30000.ethernet: Switch mux to external PHY
[    1.801024] ALSA device list:
[    1.804041]   No soundcards found.
[    1.815728] VFS: Mounted root (squashfs filesystem) readonly on device 179:26.
[    1.825604] Freeing unused kernel memory: 2048K
[    1.913537] Run /sbin/init as init process
[    1.917637]   with arguments:
[    1.917641]     /sbin/init
[    1.917646]     earlyprintk
[    1.917650]   with environment:
[    1.917654]     HOME=/
[    1.917658]     TERM=linux
[    2.131094] init: Console is alive
[    2.134838] init: - watchdog -
[    2.459017] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.485858] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.501947] init: - preinit -
[    3.037398] random: jshn: uninitialized urandom read (4 bytes read)
[    3.096233] random: jshn: uninitialized urandom read (4 bytes read)
[    3.182013] random: jshn: uninitialized urandom read (4 bytes read)
[    5.422886] random: procd: uninitialized urandom read (4 bytes read)
[    5.756994] F2FS-fs (loop0): Mounted with checkpoint version = 6a3dad48
[    5.764924] mount_root: switching to f2fs overlay
[    5.899711] urandom-seed: Seeding with /etc/urandom.seed
[    5.956953] procd: - early -
[    5.959996] procd: - watchdog -
[    6.535433] procd: - watchdog -
[    6.539105] procd: - ubus -
[    6.596966] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.604696] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.611405] random: ubusd: uninitialized urandom read (4 bytes read)
[    6.619853] procd: - init -
[    6.988413] urngd: v1.0.2 started.
[    7.004289] kmodloader: loading kernel modules from /etc/modules.d/*
[    7.018419] Loading modules backported from Linux version v6.1-rc8-0-g76dcd734eca2
[    7.026134] Backport generated by backports.git v5.15.81-1-41-g02e352527db5
[    7.045241] usbcore: registered new interface driver r8152
[    7.053865] random: crng init done
[    7.057298] random: 26 urandom warning(s) missed due to ratelimiting
[    7.060547] usbcore: registered new interface driver cdc_ether
[    7.070994] usbcore: registered new interface driver cdc_ncm
[    7.133492] PPP generic driver version 2.4.2
[    7.139892] NET: Registered protocol family 24
[    7.155749] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    7.164712] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.friendlyarm,nanopi-r1.bin failed with error -2
[    7.176383] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43430-sdio.friendlyarm,nanopi-r1.bin
[    7.223512] usb 1-1: reset high-speed USB device number 2 using ehci-platform
[    7.465065] r8152 1-1:1.0: skip request firmware
[    7.470026] r8152 1-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[    7.479205] r8152 1-1:1.0 (unnamed net_device) (uninitialized): Random ether addr fa:69:31:1b:d9:bf
[    7.480387] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Aug 16 2022 03:05:14 version 7.45.98.125 (5b7978c CY) FWID 01-f420b81d
[    7.530018] usbcore: registered new interface driver brcmfmac
[    7.537488] r8152 1-1:1.0 eth1: v1.12.11
[    7.542526] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.259304] br-lan: port 1(eth1) entered blocking state
[   11.264603] br-lan: port 1(eth1) entered disabled state
[   11.270122] device eth1 entered promiscuous mode
[   11.277460] br-lan: port 1(eth1) entered blocking state
[   11.282704] br-lan: port 1(eth1) entered forwarding state
[   11.300237] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.2:07] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
[   11.311173] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
[   11.318871] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
[   11.326629] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[   11.334946] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/rgmii link mode
[   12.243783] br-lan: port 1(eth1) entered disabled state
[   13.772667] r8152 1-1:1.0 eth1: Promiscuous mode enabled
[   13.778518] r8152 1-1:1.0 eth1: carrier on
[   13.783150] br-lan: port 1(eth1) entered blocking state
[   13.788416] br-lan: port 1(eth1) entered forwarding state
[   13.794248] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   15.211474] br-lan: port 1(eth1) entered disabled state
[   15.286529] r8152 1-1:1.0 eth1: carrier off
[   17.868666] r8152 1-1:1.0 eth1: Promiscuous mode enabled
[   17.874518] r8152 1-1:1.0 eth1: carrier on
[   17.879275] br-lan: port 1(eth1) entered blocking state
[   17.884532] br-lan: port 1(eth1) entered forwarding state
[   31.843364] vcc3v0: disabling
[   31.846368] vcc5v0: disabling

root@OpenWrt:~# logread
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    0.000000] Linux version 5.10.161 (patrick@68fde9461457) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.3.0 r21657-9260027535) 11.3.0, GNU ld (GNU Binutils) 2.39) #0 SMP Mon Jan 2 09:18:44 2023
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] CPU: div instructions available: patching division code
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] OF: fdt: Machine model: FriendlyARM NanoPi R1
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] Memory policy: Data cache writealloc
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] Zone ranges:
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000]   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] Movable zone start for each node
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] Early memory node ranges
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x000000007fffffff]
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    0.000000] On node 0 totalpages: 262144
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    0.000000]   Normal zone: 1728 pages used for memmap
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    0.000000]   Normal zone: 196608 pages, LIFO batch:63
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] psci: probing for conduit method from DT.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s30732 r8192 d22516 u61440
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    0.000000] pcpu-alloc: s30732 r8192 d22516 u61440 alloc=15*4096
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260416
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=PARTUUID=5452574f-02 rootwait
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] Memory: 1024840K/1048576K available (7274K kernel code, 827K rwdata, 1924K rodata, 2048K init, 248K bss, 23736K reserved, 0K cma-reserved, 262132K highmem)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] rcu:  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000]       Tracing variant of Tasks RCU enabled.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000020] Switching to timer-based delay loop, resolution 41ns
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000240] Console: colour dummy device 80x30
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000300] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000319] pid_max: default: 32768 minimum: 301
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000469] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.000487] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.001439] CPU: Testing write buffer coherency: ok
Mon Jan  2 09:18:45 2023 kern.err kernel: [    0.001851] /cpus/cpu@0 missing clock-frequency property
Mon Jan  2 09:18:45 2023 kern.err kernel: [    0.001876] /cpus/cpu@1 missing clock-frequency property
Mon Jan  2 09:18:45 2023 kern.err kernel: [    0.001895] /cpus/cpu@2 missing clock-frequency property
Mon Jan  2 09:18:45 2023 kern.err kernel: [    0.001913] /cpus/cpu@3 missing clock-frequency property
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.001925] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.002650] Setting up static identity map for 0x40200000 - 0x40200060
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.002793] rcu: Hierarchical SRCU implementation.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.002988] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.003430] smp: Bringing up secondary CPUs ...
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.014278] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.025227] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.036076] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.036167] smp: Brought up 1 node, 4 CPUs
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.036194] SMP: Total of 4 processors activated (192.00 BogoMIPS).
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.036202] CPU: All CPU(s) started in HYP mode.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.036208] CPU: Virtualization extensions available.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.041779] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.042042] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.042070] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.042372] pinctrl core: initialized pinctrl subsystem
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.044149] NET: Registered protocol family 16
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.044577] DMA: preallocated 256 KiB pool for atomic coherent allocations
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.046058] thermal_sys: Registered thermal governor 'step_wise'
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.046572] No ATAGs?
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    0.080190] SCSI subsystem initialized
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    0.080507] libata version 3.00 loaded.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.080859] usbcore: registered new interface driver usbfs
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.080961] usbcore: registered new interface driver hub
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.081052] usbcore: registered new device driver usb
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.081461] pps_core: LinuxPPS API ver. 1 registered
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.081483] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.081520] PTP clock support registered
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.081908] Advanced Linux Sound Architecture Driver Initialized.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.083352] clocksource: Switched to clocksource arch_sys_counter
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.090131] NET: Registered protocol family 2
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.090476] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.091751] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.091818] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.091897] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.092014] TCP: Hash tables configured (established 8192 bind 8192)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.092159] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.092237] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.092555] NET: Registered protocol family 1
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.094763] workingset: timestamp_bits=14 max_order=18 bucket_order=4
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.098966] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.099086] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.100125] bounce: pool size: 64 pages
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.106629] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.108553] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.116998] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    0.118942] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.119570] printk: console [ttyS0] disabled
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.139780] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 47, base_baud = 1500000) is a U6_16550A
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.738362] printk: console [ttyS0] enabled
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.749188] loop: module loaded
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    0.756074] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.764828] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.771189] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.778175] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.784742] ehci-platform: EHCI generic platform driver
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.790324] ehci-platform 1c1b000.usb: EHCI Host Controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.795946] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.803861] ehci-platform 1c1b000.usb: irq 36, io mem 0x01c1b000
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.833340] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.839653] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.847949] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.855187] usb usb1: Product: EHCI Host Controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.860055] usb usb1: Manufacturer: Linux 5.10.161 ehci_hcd
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.865630] usb usb1: SerialNumber: 1c1b000.usb
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.870682] hub 1-0:1.0: USB hub found
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.874527] hub 1-0:1.0: 1 port detected
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.879373] ehci-platform 1c1c000.usb: EHCI Host Controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.885032] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.892920] ehci-platform 1c1c000.usb: irq 38, io mem 0x01c1c000
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.923353] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.929621] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.937901] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.945129] usb usb2: Product: EHCI Host Controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.950003] usb usb2: Manufacturer: Linux 5.10.161 ehci_hcd
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.955577] usb usb2: SerialNumber: 1c1c000.usb
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.960687] hub 2-0:1.0: USB hub found
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.964519] hub 2-0:1.0: 1 port detected
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.969307] ehci-platform 1c1d000.usb: EHCI Host Controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.974932] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 3
Mon Jan  2 09:18:45 2023 kern.info kernel: [    0.982822] ehci-platform 1c1d000.usb: irq 40, io mem 0x01c1d000
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.013356] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.019632] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.027907] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.035129] usb usb3: Product: EHCI Host Controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.040004] usb usb3: Manufacturer: Linux 5.10.161 ehci_hcd
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.045578] usb usb3: SerialNumber: 1c1d000.usb
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.050552] hub 3-0:1.0: USB hub found
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.054364] hub 3-0:1.0: 1 port detected
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.058962] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.065201] ohci-platform: OHCI generic platform driver
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.070801] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.077462] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.085363] ohci-platform 1c1b400.usb: irq 37, io mem 0x01c1b400
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.157530] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.163345] usb 1-1: new high-speed USB device number 2 using ehci-platform
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.165805] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.179965] usb usb4: Product: Generic Platform OHCI controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.185895] usb usb4: Manufacturer: Linux 5.10.161 ohci_hcd
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.191467] usb usb4: SerialNumber: 1c1b400.usb
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.196492] hub 4-0:1.0: USB hub found
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.200294] hub 4-0:1.0: 1 port detected
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.205095] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.211746] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 5
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.219672] ohci-platform 1c1c400.usb: irq 39, io mem 0x01c1c400
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.297525] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.305805] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.313010] usb usb5: Product: Generic Platform OHCI controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.318935] usb usb5: Manufacturer: Linux 5.10.161 ohci_hcd
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.324517] usb usb5: SerialNumber: 1c1c400.usb
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.329511] hub 5-0:1.0: USB hub found
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.333349] hub 5-0:1.0: 1 port detected
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.338113] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.344791] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 6
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.352671] ohci-platform 1c1d400.usb: irq 41, io mem 0x01c1d400
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.364771] usb 1-1: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.372944] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.380095] usb 1-1: Product: USB 10/100 LAN
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.384373] usb 1-1: Manufacturer: Realtek
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.388466] usb 1-1: SerialNumber: 000000000000
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.437545] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.445837] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.453051] usb usb6: Product: Generic Platform OHCI controller
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.458975] usb usb6: Manufacturer: Linux 5.10.161 ohci_hcd
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.464551] usb usb6: SerialNumber: 1c1d400.usb
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.469533] hub 6-0:1.0: USB hub found
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.473343] hub 6-0:1.0: 1 port detected
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.478140] usbcore: registered new interface driver usb-storage
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.484799] mousedev: PS/2 mouse device common for all mice
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.490762] i2c /dev entries driver
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.495857] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.504348] sun8i-h3-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.514157] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.514181] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.514237] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.514414] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.519285] NET: Registered protocol family 10
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.520828] Segment Routing with IPv6
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.520906] NET: Registered protocol family 17
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.521204] can: controller area network core
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.521272] NET: Registered protocol family 29
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.521278] 8021q: 802.1Q VLAN Support v1.8
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    1.521404] Registering SWP/SWPB emulation handler
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.524373] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.531521] sun8i-h3-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.540789] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.548136] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.549406] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.549415] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.549805] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.549838] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 50006 (expect 58000)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.563371] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.590375] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.608312] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.623865] mmc0: new DDR MMC card at address 0001
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.655465] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.656124] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.666169] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.672607] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.673738] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.678608] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.685790] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.686254] mmc2: host does not support reading read-only switch, assuming write-enable
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.686530]  mmcblk0: p1 p2 p3
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.689474] mmc2: new high speed SDXC card at address e624
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.690510] mmcblk2: mmc2:e624 SC64G 59.5 GiB
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.692485]  mmcblk2: p1 p2
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.694004] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    1.697316] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.698496] dwmac-sun8i 1c30000.ethernet: COE Type 2
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.698509] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.744962] dwmac-sun8i 1c30000.ethernet: Normal descriptors
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.750618] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.756313] dwmac-sun8i 1c30000.ethernet: device MAC address 6e:64:20:91:e1:4d
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.765653] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.772309] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.778694] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.780633] mmc1: new high speed SDIO card at address 0001
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.786031] dwmac-sun8i 1c30000.ethernet: Switch mux to external PHY
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.801024] ALSA device list:
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.804041]   No soundcards found.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.815728] VFS: Mounted root (squashfs filesystem) readonly on device 179:26.
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.825604] Freeing unused kernel memory: 2048K
Mon Jan  2 09:18:45 2023 kern.info kernel: [    1.913537] Run /sbin/init as init process
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    1.917637]   with arguments:
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    1.917641]     /sbin/init
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    1.917646]     earlyprintk
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    1.917650]   with environment:
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    1.917654]     HOME=/
Mon Jan  2 09:18:45 2023 kern.debug kernel: [    1.917658]     TERM=linux
Mon Jan  2 09:18:45 2023 user.info kernel: [    2.131094] init: Console is alive
Mon Jan  2 09:18:45 2023 user.info kernel: [    2.134838] init: - watchdog -
Mon Jan  2 09:18:45 2023 user.info kernel: [    2.459017] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Mon Jan  2 09:18:45 2023 user.info kernel: [    2.485858] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Mon Jan  2 09:18:45 2023 user.info kernel: [    2.501947] init: - preinit -
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    3.037398] random: jshn: uninitialized urandom read (4 bytes read)
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    3.096233] random: jshn: uninitialized urandom read (4 bytes read)
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    3.182013] random: jshn: uninitialized urandom read (4 bytes read)
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    5.422886] random: procd: uninitialized urandom read (4 bytes read)
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    5.756994] F2FS-fs (loop0): Mounted with checkpoint version = 6a3dad48
Mon Jan  2 09:18:45 2023 user.info kernel: [    5.764924] mount_root: switching to f2fs overlay
Mon Jan  2 09:18:45 2023 user.warn kernel: [    5.899711] urandom-seed: Seeding with /etc/urandom.seed
Mon Jan  2 09:18:45 2023 user.info kernel: [    5.956953] procd: - early -
Mon Jan  2 09:18:45 2023 user.info kernel: [    5.959996] procd: - watchdog -
Mon Jan  2 09:18:45 2023 user.info kernel: [    6.535433] procd: - watchdog -
Mon Jan  2 09:18:45 2023 user.info kernel: [    6.539105] procd: - ubus -
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    6.596966] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    6.604696] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    6.611405] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Jan  2 09:18:45 2023 user.info kernel: [    6.619853] procd: - init -
Mon Jan  2 09:18:45 2023 user.info kernel: [    6.988413] urngd: v1.0.2 started.
Mon Jan  2 09:18:45 2023 user.info kernel: [    7.004289] kmodloader: loading kernel modules from /etc/modules.d/*
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.018419] Loading modules backported from Linux version v6.1-rc8-0-g76dcd734eca2
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.026134] Backport generated by backports.git v5.15.81-1-41-g02e352527db5
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.045241] usbcore: registered new interface driver r8152
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    7.053865] random: crng init done
Mon Jan  2 09:18:45 2023 kern.notice kernel: [    7.057298] random: 26 urandom warning(s) missed due to ratelimiting
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.060547] usbcore: registered new interface driver cdc_ether
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.070994] usbcore: registered new interface driver cdc_ncm
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.133492] PPP generic driver version 2.4.2
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.139892] NET: Registered protocol family 24
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.155749] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    7.164712] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.friendlyarm,nanopi-r1.bin failed with error -2
Mon Jan  2 09:18:45 2023 kern.warn kernel: [    7.176383] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43430-sdio.friendlyarm,nanopi-r1.bin
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.223512] usb 1-1: reset high-speed USB device number 2 using ehci-platform
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.465065] r8152 1-1:1.0: skip request firmware
Mon Jan  2 09:18:45 2023 kern.err kernel: [    7.470026] r8152 1-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.479205] r8152 1-1:1.0 (unnamed net_device) (uninitialized): Random ether addr fa:69:31:1b:d9:bf
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.480387] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Aug 16 2022 03:05:14 version 7.45.98.125 (5b7978c CY) FWID 01-f420b81d
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.530018] usbcore: registered new interface driver brcmfmac
Mon Jan  2 09:18:45 2023 kern.info kernel: [    7.537488] r8152 1-1:1.0 eth1: v1.12.11
Mon Jan  2 09:18:45 2023 user.info kernel: [    7.542526] kmodloader: done loading kernel modules from /etc/modules.d/*
Mon Jan  2 09:18:45 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mon Jan  2 09:18:45 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: started, version 2.88 cachesize 150
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Mon Jan  2 09:18:46 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Mon Jan  2 09:18:46 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Mon Jan  2 09:18:46 2023 authpriv.info dropbear[1701]: Not backgrounding
Mon Jan  2 09:18:47 2023 daemon.notice wpa_supplicant[1808]: Successfully initialized wpa_supplicant
Mon Jan  2 09:18:47 2023 user.notice : Added device handler type: bonding
Mon Jan  2 09:18:47 2023 user.notice : Added device handler type: 8021ad
Mon Jan  2 09:18:47 2023 user.notice : Added device handler type: 8021q
Mon Jan  2 09:18:47 2023 user.notice : Added device handler type: macvlan
Mon Jan  2 09:18:47 2023 user.notice : Added device handler type: veth
Mon Jan  2 09:18:47 2023 user.notice : Added device handler type: bridge
Mon Jan  2 09:18:47 2023 user.notice : Added device handler type: Network device
Mon Jan  2 09:18:47 2023 user.notice : Added device handler type: tunnel
Mon Jan  2 09:18:47 2023 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN
Mon Jan  2 09:18:47 2023 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN
Mon Jan  2 09:18:48 2023 kern.info kernel: [   11.259304] br-lan: port 1(eth1) entered blocking state
Mon Jan  2 09:18:48 2023 kern.info kernel: [   11.264603] br-lan: port 1(eth1) entered disabled state
Mon Jan  2 09:18:48 2023 kern.info kernel: [   11.270122] device eth1 entered promiscuous mode
Mon Jan  2 09:18:48 2023 kern.info kernel: [   11.277460] br-lan: port 1(eth1) entered blocking state
Mon Jan  2 09:18:48 2023 kern.info kernel: [   11.282704] br-lan: port 1(eth1) entered forwarding state
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Interface 'lan' is enabled
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Interface 'lan' is setting up now
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Interface 'lan' is now up
Mon Jan  2 09:18:48 2023 daemon.notice netifd: bridge 'br-lan' link is up
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Interface 'loopback' is enabled
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Interface 'loopback' is now up
Mon Jan  2 09:18:48 2023 kern.info kernel: [   11.300237] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.2:07] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
Mon Jan  2 09:18:48 2023 kern.info kernel: [   11.311173] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
Mon Jan  2 09:18:48 2023 kern.info kernel: [   11.318871] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
Mon Jan  2 09:18:48 2023 kern.warn kernel: [   11.326629] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
Mon Jan  2 09:18:48 2023 kern.info kernel: [   11.334946] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/rgmii link mode
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Interface 'wan' is enabled
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Interface 'wan6' is enabled
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Network device 'lo' link is up
Mon Jan  2 09:18:48 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Jan  2 09:18:48 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Jan  2 09:18:48 2023 daemon.info procd: - init complete -
Mon Jan  2 09:18:49 2023 daemon.notice netifd: bridge 'br-lan' link is down
Mon Jan  2 09:18:49 2023 daemon.notice netifd: Interface 'lan' has link connectivity loss
Mon Jan  2 09:18:49 2023 kern.info kernel: [   12.243783] br-lan: port 1(eth1) entered disabled state
Mon Jan  2 09:18:49 2023 daemon.err odhcpd[1929]: Failed to send to ff02::1%lan@br-lan (Address not available)
Mon Jan  2 09:18:51 2023 kern.notice kernel: [   13.772667] r8152 1-1:1.0 eth1: Promiscuous mode enabled
Mon Jan  2 09:18:51 2023 kern.info kernel: [   13.778518] r8152 1-1:1.0 eth1: carrier on
Mon Jan  2 09:18:51 2023 kern.info kernel: [   13.783150] br-lan: port 1(eth1) entered blocking state
Mon Jan  2 09:18:51 2023 kern.info kernel: [   13.788416] br-lan: port 1(eth1) entered forwarding state
Mon Jan  2 09:18:51 2023 daemon.notice netifd: Network device 'eth1' link is up
Mon Jan  2 09:18:51 2023 daemon.notice netifd: bridge 'br-lan' link is up
Mon Jan  2 09:18:51 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Jan  2 09:18:51 2023 kern.info kernel: [   13.794248] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Mon Jan  2 09:18:52 2023 daemon.notice netifd: Network device 'eth1' link is down
Mon Jan  2 09:18:52 2023 kern.info kernel: [   15.211474] br-lan: port 1(eth1) entered disabled state
Mon Jan  2 09:18:52 2023 kern.info kernel: [   15.286529] r8152 1-1:1.0 eth1: carrier off
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: started, version 2.88 cachesize 150
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Mon Jan  2 09:18:53 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Mon Jan  2 09:18:53 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Mon Jan  2 09:18:53 2023 daemon.notice netifd: bridge 'br-lan' link is down
Mon Jan  2 09:18:53 2023 daemon.notice netifd: Interface 'lan' has link connectivity loss
Mon Jan  2 09:18:55 2023 kern.notice kernel: [   17.868666] r8152 1-1:1.0 eth1: Promiscuous mode enabled
Mon Jan  2 09:18:55 2023 kern.info kernel: [   17.874518] r8152 1-1:1.0 eth1: carrier on
Mon Jan  2 09:18:55 2023 kern.info kernel: [   17.879275] br-lan: port 1(eth1) entered blocking state
Mon Jan  2 09:18:55 2023 kern.info kernel: [   17.884532] br-lan: port 1(eth1) entered forwarding state
Mon Jan  2 09:18:55 2023 daemon.notice netifd: Network device 'eth1' link is up
Mon Jan  2 09:18:55 2023 daemon.notice netifd: bridge 'br-lan' link is up
Mon Jan  2 09:18:55 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Jan  2 09:19:09 2023 kern.info kernel: [   31.843364] vcc3v0: disabling
Mon Jan  2 09:19:09 2023 kern.info kernel: [   31.846368] vcc5v0: disabling

root@OpenWrt:~# opkg list-installed
base-files - 1511-r21657-9260027535
brcmfmac-firmware-usb - 20221214-3
busybox - 1.35.0-5
ca-bundle - 20211016-1
cypress-firmware-43430-sdio - 5.10.9-2022_0909-1
dnsmasq - 2.88-1
dropbear - 2022.82-2
e2fsprogs - 1.46.5-2
firewall4 - 2022-11-29-700a925f-2
fstools - 2022-11-10-3affe9ea-2
fwtool - 2019-11-12-8f7fe925-1
getrandom - 2022-08-13-4c7b720b-2
hostapd-common - 2022-07-29-b704dc72-17.2
iw - 5.19-1
iwinfo - 2022-12-15-8d158096-1
jansson4 - 2.14-3
jshn - 2022-09-27-ea560134-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 5.10.161-1-2a19ade0853c399cc4d9ab28d9c214aa
kmod-brcmfmac - 5.10.161+6.1-rc8-2
kmod-brcmutil - 5.10.161+6.1-rc8-2
kmod-cfg80211 - 5.10.161+6.1-rc8-2
kmod-crypto-acompress - 5.10.161-1
kmod-crypto-crc32c - 5.10.161-1
kmod-crypto-hash - 5.10.161-1
kmod-crypto-sha256 - 5.10.161-1
kmod-leds-gpio - 5.10.161-1
kmod-lib-crc-ccitt - 5.10.161-1
kmod-lib-crc32c - 5.10.161-1
kmod-lib-lzo - 5.10.161-1
kmod-mii - 5.10.161-1
kmod-mmc - 5.10.161-1
kmod-nf-conntrack - 5.10.161-1
kmod-nf-conntrack6 - 5.10.161-1
kmod-nf-flow - 5.10.161-1
kmod-nf-log - 5.10.161-1
kmod-nf-log6 - 5.10.161-1
kmod-nf-nat - 5.10.161-1
kmod-nf-reject - 5.10.161-1
kmod-nf-reject6 - 5.10.161-1
kmod-nfnetlink - 5.10.161-1
kmod-nft-core - 5.10.161-1
kmod-nft-fib - 5.10.161-1
kmod-nft-nat - 5.10.161-1
kmod-nft-offload - 5.10.161-1
kmod-nls-base - 5.10.161-1
kmod-ppp - 5.10.161-1
kmod-pppoe - 5.10.161-1
kmod-pppox - 5.10.161-1
kmod-slhc - 5.10.161-1
kmod-usb-core - 5.10.161-1
kmod-usb-net - 5.10.161-1
kmod-usb-net-cdc-ether - 5.10.161-1
kmod-usb-net-cdc-ncm - 5.10.161-1
kmod-usb-net-rtl8152 - 5.10.161-1
libblkid1 - 2.38-2
libblobmsg-json20220927 - 2022-09-27-ea560134-1
libc - 1.2.3-4
libcomerr0 - 1.46.5-2
libext2fs2 - 1.46.5-2
libf2fs6 - 1.15.0-1
libgcc1 - 11.3.0-4
libiwinfo-data - 2022-12-15-8d158096-1
libiwinfo20210430 - 2022-12-15-8d158096-1
libjson-c5 - 0.16-2
libjson-script20220927 - 2022-09-27-ea560134-1
libmnl0 - 1.0.5-1
libnftnl11 - 1.2.4-1
libnl-tiny2022-11-01 - 2022-11-01-db3b2cdb-1
libpthread - 1.2.3-4
librt - 1.2.3-4
libsmartcols1 - 2.38-2
libss2 - 1.46.5-2
libubox20220927 - 2022-09-27-ea560134-1
libubus20220601 - 2022-06-01-2bebf93c-1
libuci20130104 - 2021-10-22-f84f49f0-6
libuclient20201210 - 2021-05-14-6a6011df-1
libucode20220812 - 2022-12-02-46d93c9c-1
libustream-wolfssl20201210 - 2022-12-08-9217ab46-2
libuuid1 - 2.38-2
libwolfssl5.5.4.e624513f - 5.5.4-stable-1
logd - 2022-08-13-4c7b720b-2
mkf2fs - 1.15.0-1
mtd - 26
netifd - 2022-12-30-81c1fbcb-1
nftables-json - 1.0.5-2
odhcp6c - 2022-08-05-7d21e8d8-19
odhcpd-ipv6only - 2022-10-31-a92c0a73-1
openwrt-keyring - 2022-03-25-62471e69-2
opkg - 2022-02-24-d038e5b6-1
partx-utils - 2.38-2
ppp - 2.4.9.git-2021-01-04-4
ppp-mod-pppoe - 2.4.9.git-2021-01-04-4
procd - 2022-11-10-039b88f7-3
procd-seccomp - 2022-11-10-039b88f7-3
procd-ujail - 2022-11-10-039b88f7-3
r8152-firmware - 20221214-3
uboot-envtools - 2022.10-17
ubox - 2022-08-13-4c7b720b-2
ubus - 2022-06-01-2bebf93c-1
ubusd - 2022-06-01-2bebf93c-1
uci - 2021-10-22-f84f49f0-6
uclient-fetch - 2021-05-14-6a6011df-1
ucode - 2022-12-02-46d93c9c-1
ucode-mod-fs - 2022-12-02-46d93c9c-1
ucode-mod-ubus - 2022-12-02-46d93c9c-1
ucode-mod-uci - 2022-12-02-46d93c9c-1
urandom-seed - 3
urngd - 2020-01-21-c7f7b6b6-1
usign - 2020-05-23-f1f65026-1
wireless-regdb - 2022.08.12-1
wpad-basic-wolfssl - 2022-07-29-b704dc72-17.2