search

openwrt / openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
Other
19.61k stars 10.24k forks source link

rtw88_8822bu module crashes on enable or disable access point #13975

Open mirobiala opened 10 months ago

mirobiala commented 10 months ago

Describe the bug

When Enable or Disable access point for rtw88_8822bu device, rtw88_8822bu module crashes.

OpenWrt version

r24396-09b7e1955c

OpenWrt target/subtarget

x86/64

Device

QEMU Standard PC (Q35 + ICH9, 2009)

Image kind

Self-built image

Steps to reproduce

Enable or Disable access point via Luci->Network->Wireless.

Actual behaviour

Module crashes

Expected behaviour

Not to crash

Additional info

root@OpenWRT:~# dmesg [ 0.000000] Linux version 5.15.138 (x86_64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r24384-fbe48e99bd) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Mon Nov 13 22:33:40 2023 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=dfe968b2-291b-1ba0-741b-694a295ff302 rootwait console=tty0 console=ttyS0,115200n8 noinitrd [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 26e3001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 385843196364 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 3799.996 MHz processor [ 0.000489] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000491] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000494] last_pfn = 0x3ffd8 max_arch_pfn = 0x400000000 [ 0.000531] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001960] found SMP MP-table at [mem 0x000f5b70-0x000f5b7f] [ 0.001968] Using GB pages for direct mapping [ 0.002071] ACPI: Early table checksum verification disabled [ 0.002074] ACPI: RSDP 0x00000000000F59B0 000014 (v00 BOCHS ) [ 0.002076] ACPI: RSDT 0x000000003FFE2154 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002080] ACPI: FACP 0x000000003FFE1F84 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002083] ACPI: DSDT 0x000000003FFE0040 001F44 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002085] ACPI: FACS 0x000000003FFE0000 000040 [ 0.002086] ACPI: APIC 0x000000003FFE2078 000078 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002088] ACPI: MCFG 0x000000003FFE20F0 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002089] ACPI: WAET 0x000000003FFE212C 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002091] ACPI: Reserving FACP table memory at [mem 0x3ffe1f84-0x3ffe2077] [ 0.002092] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe1f83] [ 0.002092] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] [ 0.002093] ACPI: Reserving APIC table memory at [mem 0x3ffe2078-0x3ffe20ef] [ 0.002094] ACPI: Reserving MCFG table memory at [mem 0x3ffe20f0-0x3ffe212b] [ 0.002094] ACPI: Reserving WAET table memory at [mem 0x3ffe212c-0x3ffe2153] [ 0.002119] Zone ranges: [ 0.002120] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.002121] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff] [ 0.002122] Normal empty [ 0.002123] Movable zone start for each node [ 0.002124] Early memory node ranges [ 0.002124] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.002125] node 0: [mem 0x0000000000100000-0x000000003ffd7fff] [ 0.002126] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff] [ 0.002129] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.002148] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.003506] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.004115] ACPI: PM-Timer IO Port: 0x608 [ 0.004121] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.004141] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.004143] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.004144] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.004145] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.004146] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.004147] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.004149] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.004150] TSC deadline timer available [ 0.004153] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.004166] [mem 0x40000000-0xafffffff] available for PCI devices [ 0.004167] Booting paravirtualized kernel on KVM [ 0.004169] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.004172] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 [ 0.004233] percpu: Embedded 44 pages/cpu s142488 r8192 d29544 u2097152 [ 0.004236] pcpu-alloc: s142488 r8192 d29544 u2097152 alloc=1*2097152 [ 0.004238] pcpu-alloc: [0] 0 [ 0.004249] kvm-guest: stealtime: cpu 0, msr 3ec1c080 [ 0.004251] kvm-guest: PV spinlocks disabled, no host support [ 0.004253] Built 1 zonelists, mobility grouping on. Total pages: 257752 [ 0.004254] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=dfe968b2-291b-1ba0-741b-694a295ff302 rootwait console=tty0 console=ttyS0,115200n8 noinitrd [ 0.004290] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz", will be passed to user space. [ 0.004313] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.004347] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.004358] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.005659] Memory: 1004396K/1048024K available (14338K kernel code, 1120K rwdata, 3568K rodata, 1588K init, 1268K bss, 43372K reserved, 0K cma-reserved) [ 0.006288] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.006406] rcu: Hierarchical RCU implementation. [ 0.006407] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1. [ 0.006408] Tracing variant of Tasks RCU enabled. [ 0.006409] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.006410] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.006413] NR_IRQS: 33024, nr_irqs: 256, preallocated irqs: 16 [ 0.006583] random: crng init done [ 0.012967] Console: colour VGA+ 80x25 [ 0.032019] printk: console [tty0] enabled [ 0.083410] printk: console [ttyS0] enabled [ 0.083955] ACPI: Core revision 20210730 [ 0.084487] APIC: Switch to symmetric I/O mode setup [ 0.085242] x2apic enabled [ 0.085801] Switched APIC routing to physical x2apic. [ 0.087147] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8ca817dab, max_idle_ns: 881590735735 ns [ 0.089282] Calibrating delay loop (skipped) preset value.. 7599.99 BogoMIPS (lpj=37999960) [ 0.090664] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.091737] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 [ 0.092559] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 [ 0.093299] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.094292] Spectre V2 : Mitigation: Retpolines [ 0.094845] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.095818] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.096583] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.097377] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.098367] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.099281] Speculative Return Stack Overflow: IBPB-extending microcode not applied! [ 0.099281] Speculative Return Stack Overflow: WARNING: See https://kernel.org/doc/html/latest/admin-guide/hw-vuln/srso.html for mitigation options. [ 0.099281] Speculative Return Stack Overflow: Mitigation: safe RET, no microcode [ 0.099281] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.099281] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.099281] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.099281] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'

[ 0.099281] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. [ 0.099281] Freeing SMP alternatives memory: 44K [ 0.099281] pid_max: default: 32768 minimum: 301 [ 0.099281] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.099281] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.099281] smpboot: CPU0: AMD EPYC-Milan Processor (family: 0x19, model: 0x1, stepping: 0x1) [ 0.099281] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.099281] ... version: 0 [ 0.099281] ... bit width: 48 [ 0.099281] ... generic registers: 6 [ 0.099281] ... value mask: 0000ffffffffffff [ 0.099281] ... max period: 00007fffffffffff [ 0.099281] ... fixed-purpose events: 0 [ 0.099281] ... event mask: 000000000000003f [ 0.099281] signal: max sigframe size: 2976 [ 0.099281] rcu: Hierarchical SRCU implementation. [ 0.099281] smp: Bringing up secondary CPUs ... [ 0.099281] smp: Brought up 1 node, 1 CPU [ 0.099281] smpboot: Max logical packages: 1 [ 0.099281] smpboot: Total of 1 processors activated (7599.99 BogoMIPS) [ 0.099281] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.099286] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.100058] pinctrl core: initialized pinctrl subsystem [ 0.100739] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.101488] thermal_sys: Registered thermal governor 'step_wise' [ 0.101488] thermal_sys: Registered thermal governor 'user_space' [ 0.102181] cpuidle: using governor ladder [ 0.103751] ACPI: bus type PCI registered [ 0.104245] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.104994] PCI: Using configuration type 1 for base access [ 0.105637] PCI: Using configuration type 1 for extended access [ 0.107041] cryptd: max_cpu_qlen set to 1000 [ 0.107647] ACPI: Added _OSI(Module Device) [ 0.108161] ACPI: Added _OSI(Processor Device) [ 0.108696] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.109253] ACPI: Added _OSI(Processor Aggregator Device) [ 0.109286] ACPI: Added _OSI(Linux-Dell-Video) [ 0.109826] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.110445] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.111534] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.112537] ACPI: Interpreter enabled [ 0.113002] ACPI: PM: (supports S0 S5) [ 0.113469] ACPI: Using IOAPIC for interrupt routing [ 0.119314] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.120401] ACPI: Enabled 1 GPEs in block 00 to 3F [ 0.121788] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.122500] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.123564] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.124308] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.125219] PCI host bridge to bus 0000:00 [ 0.125724] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.126482] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.127237] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.128113] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] [ 0.128987] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.129286] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.130179] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.130925] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.131897] pci 0000:00:01.0: [1b36:0100] type 00 class 0x030000 [ 0.135403] pci 0000:00:01.0: reg 0x10: [mem 0xf4000000-0xf7ffffff] [ 0.139330] pci 0000:00:01.0: reg 0x14: [mem 0xf8000000-0xfbffffff] [ 0.143263] pci 0000:00:01.0: reg 0x18: [mem 0xfd014000-0xfd015fff] [ 0.146009] pci 0000:00:01.0: reg 0x1c: [io 0xc040-0xc05f] [ 0.151720] pci 0000:00:01.0: reg 0x30: [mem 0xfd000000-0xfd00ffff pref] [ 0.152606] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.155178] pci 0000:00:02.0: [1b36:000c] type 01 class 0x060400 [ 0.156694] pci 0000:00:02.0: reg 0x10: [mem 0xfd016000-0xfd016fff] [ 0.159048] pci 0000:00:02.1: [1b36:000c] type 01 class 0x060400 [ 0.160036] pci 0000:00:02.1: reg 0x10: [mem 0xfd017000-0xfd017fff] [ 0.162503] pci 0000:00:02.2: [1b36:000c] type 01 class 0x060400 [ 0.164573] pci 0000:00:02.2: reg 0x10: [mem 0xfd018000-0xfd018fff] [ 0.169670] pci 0000:00:02.3: [1b36:000c] type 01 class 0x060400 [ 0.171412] pci 0000:00:02.3: reg 0x10: [mem 0xfd019000-0xfd019fff] [ 0.173708] pci 0000:00:02.4: [1b36:000c] type 01 class 0x060400 [ 0.175218] pci 0000:00:02.4: reg 0x10: [mem 0xfd01a000-0xfd01afff] [ 0.178736] pci 0000:00:02.5: [1b36:000c] type 01 class 0x060400 [ 0.180052] pci 0000:00:02.5: reg 0x10: [mem 0xfd01b000-0xfd01bfff] [ 0.182320] pci 0000:00:02.6: [1b36:000c] type 01 class 0x060400 [ 0.183767] pci 0000:00:02.6: reg 0x10: [mem 0xfd01c000-0xfd01cfff] [ 0.188351] pci 0000:00:02.7: [1b36:000c] type 01 class 0x060400 [ 0.189899] pci 0000:00:02.7: reg 0x10: [mem 0xfd01d000-0xfd01dfff] [ 0.192147] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.193110] pci 0000:00:1b.0: reg 0x10: [mem 0xfd010000-0xfd013fff] [ 0.195356] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.199783] pci 0000:00:1d.0: reg 0x20: [io 0xc060-0xc07f] [ 0.201030] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.202971] pci 0000:00:1d.1: reg 0x20: [io 0xc080-0xc09f] [ 0.204201] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.206066] pci 0000:00:1d.2: reg 0x20: [io 0xc0a0-0xc0bf] [ 0.207366] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.208356] pci 0000:00:1d.7: reg 0x10: [mem 0xfd01e000-0xfd01efff] [ 0.210859] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.211842] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.212934] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.215733] pci 0000:00:1f.2: reg 0x20: [io 0xc0c0-0xc0df] [ 0.216806] pci 0000:00:1f.2: reg 0x24: [mem 0xfd01f000-0xfd01ffff] [ 0.218189] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.221778] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.223396] pci 0000:01:00.0: [1af4:1041] type 00 class 0x020000 [ 0.225649] pci 0000:01:00.0: reg 0x14: [mem 0xfce80000-0xfce80fff] [ 0.228613] pci 0000:01:00.0: reg 0x20: [mem 0xfea00000-0xfea03fff 64bit pref] [ 0.229729] pci 0000:01:00.0: reg 0x30: [mem 0xfce00000-0xfce7ffff pref] [ 0.232138] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.232759] pci 0000:00:02.0: bridge window [mem 0xfce00000-0xfcffffff] [ 0.233535] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfebfffff 64bit pref] [ 0.235020] pci 0000:02:00.0: [1af4:1041] type 00 class 0x020000 [ 0.236648] pci 0000:02:00.0: reg 0x14: [mem 0xfcc80000-0xfcc80fff] [ 0.238600] pci 0000:02:00.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.239688] pci 0000:02:00.0: reg 0x30: [mem 0xfcc00000-0xfcc7ffff pref] [ 0.241059] pci 0000:00:02.1: PCI bridge to [bus 02] [ 0.242042] pci 0000:00:02.1: bridge window [mem 0xfcc00000-0xfcdfffff] [ 0.242819] pci 0000:00:02.1: bridge window [mem 0xfe800000-0xfe9fffff 64bit pref] [ 0.244241] pci 0000:03:00.0: [1af4:1048] type 00 class 0x010000 [ 0.245800] pci 0000:03:00.0: reg 0x14: [mem 0xfca00000-0xfca00fff] [ 0.247707] pci 0000:03:00.0: reg 0x20: [mem 0xfe600000-0xfe603fff 64bit pref] [ 0.249585] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.250191] pci 0000:00:02.2: bridge window [mem 0xfca00000-0xfcbfffff] [ 0.250969] pci 0000:00:02.2: bridge window [mem 0xfe600000-0xfe7fffff 64bit pref] [ 0.253434] pci 0000:04:00.0: [1af4:1043] type 00 class 0x078000 [ 0.255830] pci 0000:04:00.0: reg 0x14: [mem 0xfc800000-0xfc800fff] [ 0.257893] pci 0000:04:00.0: reg 0x20: [mem 0xfe400000-0xfe403fff 64bit pref] [ 0.259783] pci 0000:00:02.3: PCI bridge to [bus 04] [ 0.260420] pci 0000:00:02.3: bridge window [mem 0xfc800000-0xfc9fffff] [ 0.261201] pci 0000:00:02.3: bridge window [mem 0xfe400000-0xfe5fffff 64bit pref] [ 0.262663] pci 0000:05:00.0: [1af4:1042] type 00 class 0x010000 [ 0.265403] pci 0000:05:00.0: reg 0x14: [mem 0xfc600000-0xfc600fff] [ 0.267679] pci 0000:05:00.0: reg 0x20: [mem 0xfe200000-0xfe203fff 64bit pref] [ 0.269726] pci 0000:00:02.4: PCI bridge to [bus 05] [ 0.270341] pci 0000:00:02.4: bridge window [mem 0xfc600000-0xfc7fffff] [ 0.271131] pci 0000:00:02.4: bridge window [mem 0xfe200000-0xfe3fffff 64bit pref] [ 0.272584] pci 0000:06:00.0: [1af4:1045] type 00 class 0x00ff00 [ 0.275953] pci 0000:06:00.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref] [ 0.277710] pci 0000:00:02.5: PCI bridge to [bus 06] [ 0.278316] pci 0000:00:02.5: bridge window [mem 0xfc400000-0xfc5fffff] [ 0.279098] pci 0000:00:02.5: bridge window [mem 0xfe000000-0xfe1fffff 64bit pref] [ 0.279837] pci 0000:07:00.0: [1af4:1044] type 00 class 0x00ff00 [ 0.281818] pci 0000:07:00.0: reg 0x20: [mem 0xfde00000-0xfde03fff 64bit pref] [ 0.284136] pci 0000:00:02.6: PCI bridge to [bus 07] [ 0.285211] pci 0000:00:02.6: bridge window [mem 0xfc200000-0xfc3fffff] [ 0.285995] pci 0000:00:02.6: bridge window [mem 0xfde00000-0xfdffffff 64bit pref] [ 0.287340] pci 0000:00:02.7: PCI bridge to [bus 08] [ 0.287960] pci 0000:00:02.7: bridge window [mem 0xfc000000-0xfc1fffff] [ 0.288746] pci 0000:00:02.7: bridge window [mem 0xfdc00000-0xfddfffff 64bit pref] [ 0.291394] pci_bus 0000:00: on NUMA node 0 [ 0.291579] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.292321] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.293052] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.293780] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.294557] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.296281] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.297210] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.298161] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.298914] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.299293] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.300029] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.300845] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.301581] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.302273] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.303045] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.303872] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.304908] iommu: Default domain type: Translated [ 0.305605] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.306568] SCSI subsystem initialized [ 0.307178] libata version 3.00 loaded. [ 0.307184] ACPI: bus type USB registered [ 0.307713] usbcore: registered new interface driver usbfs [ 0.308361] usbcore: registered new interface driver hub [ 0.308986] usbcore: registered new device driver usb [ 0.309299] pps_core: LinuxPPS API ver. 1 registered [ 0.309886] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.311027] PTP clock support registered [ 0.311694] PCI: Using ACPI for IRQ routing [ 0.312806] PCI: pci_cache_line_size set to 64 bytes [ 0.313144] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.313146] e820: reserve RAM buffer [mem 0x3ffd8000-0x3fffffff] [ 0.313280] clocksource: Switched to clocksource kvm-clock [ 0.313999] pnp: PnP ACPI init [ 0.314545] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.315505] pnp: PnP ACPI: found 5 devices [ 0.317055] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.318112] NET: Registered PF_INET protocol family [ 0.318741] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.319734] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.320690] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.321590] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.322508] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.323373] TCP: Hash tables configured (established 8192 bind 8192) [ 0.324132] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.324878] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.325756] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.326454] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.327398] pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.328333] pci 0000:00:02.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.329411] pci 0000:00:02.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.340092] pci 0000:00:02.4: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [ 0.341030] pci 0000:00:02.5: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.342348] pci 0000:00:02.6: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 0.343319] pci 0000:00:02.7: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 [ 0.344270] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.345036] pci 0000:00:02.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.345817] pci 0000:00:02.2: BAR 13: assigned [io 0x3000-0x3fff] [ 0.346559] pci 0000:00:02.3: BAR 13: assigned [io 0x4000-0x4fff] [ 0.347257] pci 0000:00:02.4: BAR 13: assigned [io 0x5000-0x5fff] [ 0.347954] pci 0000:00:02.5: BAR 13: assigned [io 0x6000-0x6fff] [ 0.348652] pci 0000:00:02.6: BAR 13: assigned [io 0x7000-0x7fff] [ 0.349347] pci 0000:00:02.7: BAR 13: assigned [io 0x8000-0x8fff] [ 0.350044] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.350649] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 0.351833] pci 0000:00:02.0: bridge window [mem 0xfce00000-0xfcffffff] [ 0.352841] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfebfffff 64bit pref] [ 0.354197] pci 0000:00:02.1: PCI bridge to [bus 02] [ 0.354803] pci 0000:00:02.1: bridge window [io 0x2000-0x2fff] [ 0.355846] pci 0000:00:02.1: bridge window [mem 0xfcc00000-0xfcdfffff] [ 0.356867] pci 0000:00:02.1: bridge window [mem 0xfe800000-0xfe9fffff 64bit pref] [ 0.358263] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.358919] pci 0000:00:02.2: bridge window [io 0x3000-0x3fff] [ 0.359966] pci 0000:00:02.2: bridge window [mem 0xfca00000-0xfcbfffff] [ 0.360950] pci 0000:00:02.2: bridge window [mem 0xfe600000-0xfe7fffff 64bit pref] [ 0.363246] pci 0000:00:02.3: PCI bridge to [bus 04] [ 0.363840] pci 0000:00:02.3: bridge window [io 0x4000-0x4fff] [ 0.364890] pci 0000:00:02.3: bridge window [mem 0xfc800000-0xfc9fffff] [ 0.365869] pci 0000:00:02.3: bridge window [mem 0xfe400000-0xfe5fffff 64bit pref] [ 0.367231] pci 0000:00:02.4: PCI bridge to [bus 05] [ 0.367818] pci 0000:00:02.4: bridge window [io 0x5000-0x5fff] [ 0.369493] pci 0000:00:02.4: bridge window [mem 0xfc600000-0xfc7fffff] [ 0.370496] pci 0000:00:02.4: bridge window [mem 0xfe200000-0xfe3fffff 64bit pref] [ 0.371843] pci 0000:00:02.5: PCI bridge to [bus 06] [ 0.372430] pci 0000:00:02.5: bridge window [io 0x6000-0x6fff] [ 0.373489] pci 0000:00:02.5: bridge window [mem 0xfc400000-0xfc5fffff] [ 0.375287] pci 0000:00:02.5: bridge window [mem 0xfe000000-0xfe1fffff 64bit pref] [ 0.376721] pci 0000:00:02.6: PCI bridge to [bus 07] [ 0.377306] pci 0000:00:02.6: bridge window [io 0x7000-0x7fff] [ 0.378353] pci 0000:00:02.6: bridge window [mem 0xfc200000-0xfc3fffff] [ 0.379537] pci 0000:00:02.6: bridge window [mem 0xfde00000-0xfdffffff 64bit pref] [ 0.380972] pci 0000:00:02.7: PCI bridge to [bus 08] [ 0.381565] pci 0000:00:02.7: bridge window [io 0x8000-0x8fff] [ 0.382614] pci 0000:00:02.7: bridge window [mem 0xfc000000-0xfc1fffff] [ 0.383613] pci 0000:00:02.7: bridge window [mem 0xfdc00000-0xfddfffff 64bit pref] [ 0.385601] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.386342] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.387044] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.387805] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window] [ 0.388566] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.389328] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.390162] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.390818] pci_bus 0000:01: resource 1 [mem 0xfce00000-0xfcffffff] [ 0.391519] pci_bus 0000:01: resource 2 [mem 0xfea00000-0xfebfffff 64bit pref] [ 0.392418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.393080] pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfcdfffff] [ 0.393797] pci_bus 0000:02: resource 2 [mem 0xfe800000-0xfe9fffff 64bit pref] [ 0.394663] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.395901] pci_bus 0000:03: resource 1 [mem 0xfca00000-0xfcbfffff] [ 0.396644] pci_bus 0000:03: resource 2 [mem 0xfe600000-0xfe7fffff 64bit pref] [ 0.397549] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.398185] pci_bus 0000:04: resource 1 [mem 0xfc800000-0xfc9fffff] [ 0.399523] pci_bus 0000:04: resource 2 [mem 0xfe400000-0xfe5fffff 64bit pref] [ 0.400376] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] [ 0.401011] pci_bus 0000:05: resource 1 [mem 0xfc600000-0xfc7fffff] [ 0.401715] pci_bus 0000:05: resource 2 [mem 0xfe200000-0xfe3fffff 64bit pref] [ 0.402576] pci_bus 0000:06: resource 0 [io 0x6000-0x6fff] [ 0.403227] pci_bus 0000:06: resource 1 [mem 0xfc400000-0xfc5fffff] [ 0.403930] pci_bus 0000:06: resource 2 [mem 0xfe000000-0xfe1fffff 64bit pref] [ 0.404776] pci_bus 0000:07: resource 0 [io 0x7000-0x7fff] [ 0.405412] pci_bus 0000:07: resource 1 [mem 0xfc200000-0xfc3fffff] [ 0.406113] pci_bus 0000:07: resource 2 [mem 0xfde00000-0xfdffffff 64bit pref] [ 0.406990] pci_bus 0000:08: resource 0 [io 0x8000-0x8fff] [ 0.407635] pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc1fffff] [ 0.408341] pcibus 0000:08: resource 2 [mem 0xfdc00000-0xfddfffff 64bit pref] [ 0.409513] ACPI: _SB.GSIA: Enabled at IRQ 16 [ 0.410549] ACPI: _SB.GSIB: Enabled at IRQ 17 [ 0.411455] ACPI: _SB.GSIC: Enabled at IRQ 18 [ 0.412533] ACPI: _SB_.GSID: Enabled at IRQ 19 [ 0.413913] PCI: CLS 0 bytes, default 64 [ 0.414461] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d8ca817dab, max_idle_ns: 881590735735 ns [ 0.416015] workingset: timestamp_bits=46 max_order=18 bucketorder=0 [ 0.417091] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.417834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.418961] ACPI: _SB.GSIG: Enabled at IRQ 22 [ 0.420091] pcieport 0000:00:02.0: PME: Signaling with IRQ 24 [ 0.421536] pcieport 0000:00:02.1: PME: Signaling with IRQ 25 [ 0.423018] pcieport 0000:00:02.2: PME: Signaling with IRQ 26 [ 0.424442] pcieport 0000:00:02.3: PME: Signaling with IRQ 27 [ 0.426405] pcieport 0000:00:02.4: PME: Signaling with IRQ 28 [ 0.427864] pcieport 0000:00:02.5: PME: Signaling with IRQ 29 [ 0.430152] pcieport 0000:00:02.6: PME: Signaling with IRQ 30 [ 0.431619] pcieport 0000:00:02.7: PME: Signaling with IRQ 31 [ 0.432460] hv_vmbus: registering driver hyperv_fb [ 0.433099] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.434742] ACPI: button: Power Button [PWRF] [ 0.440873] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.463871] 00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.470838] Non-volatile memory driver v1.3 [ 0.472299] Linux agpgart interface v0.103 [ 0.472882] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.474581] loop: module loaded [ 0.475439] virtio_blk virtio4: [vda] 246337 512-byte logical blocks (126 MB/120 MiB) [ 0.477125] Alternate GPT is invalid, using primary GPT. [ 0.477765] vda: vda1 vda2 vda128 [ 0.478285] Guest personality initialized and is inactive [ 0.478940] VMCI host device registered (name=vmci, major=10, minor=127) [ 0.479705] Initialized host personality [ 0.480276] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized [ 0.481820] scsi host0: Virtio SCSI HBA [ 0.490487] VMware PVSCSI driver - version 1.0.7.0-k [ 0.491101] hv_vmbus: registering driver hv_storvsc [ 0.491851] ahci 0000:00:1f.2: version 3.0 [ 0.492401] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.493429] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.494819] scsi host1: ahci [ 0.495286] scsi host2: ahci [ 0.495749] scsi host3: ahci [ 0.496218] scsi host4: ahci [ 0.496675] scsi host5: ahci [ 0.497130] scsi host6: ahci [ 0.497551] ata1: SATA max UDMA/133 abar m4096@0xfd01f000 port 0xfd01f100 irq 40 [ 0.498454] ata2: SATA max UDMA/133 abar m4096@0xfd01f000 port 0xfd01f180 irq 40 [ 0.499349] ata3: SATA max UDMA/133 abar m4096@0xfd01f000 port 0xfd01f200 irq 40 [ 0.500238] ata4: SATA max UDMA/133 abar m4096@0xfd01f000 port 0xfd01f280 irq 40 [ 0.501133] ata5: SATA max UDMA/133 abar m4096@0xfd01f000 port 0xfd01f300 irq 40 [ 0.502023] ata6: SATA max UDMA/133 abar m4096@0xfd01f000 port 0xfd01f380 irq 40 [ 0.506340] VMware vmxnet3 virtual NIC driver - version 1.6.0.0-k-NAPI [ 0.507252] hv_vmbus: registering driver hv_netvsc [ 0.507918] Fusion MPT base driver 3.04.20 [ 0.508510] Copyright (c) 1999-2008 LSI Corporation [ 0.509166] Fusion MPT SPI Host driver 3.04.20 [ 0.509755] Fusion MPT SAS Host driver 3.04.20 [ 0.510335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.511180] ehci-pci: EHCI PCI platform driver [ 0.512242] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.512892] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.793990] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfd01e000 [ 0.822776] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.824661] hub 1-0:1.0: USB hub found [ 0.825257] hub 1-0:1.0: 6 ports detected [ 0.826039] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.826931] ohci-pci: OHCI PCI platform driver [ 0.827601] uhci_hcd: USB Universal Host Controller Interface driver [ 0.828999] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.829897] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.840918] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c060 [ 0.841809] hub 2-0:1.0: USB hub found [ 0.842307] hub 2-0:1.0: 2 ports detected [ 0.843327] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.843966] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.844980] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c080 [ 0.845794] hub 3-0:1.0: USB hub found [ 0.846321] hub 3-0:1.0: 2 ports detected [ 0.847381] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.848018] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.848976] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c0a0 [ 0.849796] hub 4-0:1.0: USB hub found [ 0.850299] hub 4-0:1.0: 2 ports detected [ 0.850908] usbcore: registered new interface driver usb-storage [ 0.851622] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.853154] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.854404] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.855019] hv_vmbus: registering driver hyperv_keyboard [ 0.855659] rtc_cmos 00:03: RTC can wake from S4 [ 0.856486] rtc_cmos 00:03: registered as rtc0 [ 0.857080] rtc_cmos 00:03: setting system clock to 2023-11-14T07:54:13 UTC (1699948453) [ 0.858067] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram [ 0.858885] sdhci: Secure Digital Host Controller Interface driver [ 0.859614] sdhci: Copyright(c) Pierre Ossman [ 0.860519] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.862361] hv_vmbus: registering driver hid_hyperv [ 0.863125] usbcore: registered new interface driver usbhid [ 0.863779] usbhid: USB HID core driver [ 0.864276] hv_utils: Registering HyperV Utility Driver [ 0.864895] hv_vmbus: registering driver hv_utils [ 0.865469] hv_vmbus: registering driver hv_balloon [ 0.866122] NET: Registered PF_INET6 protocol family [ 0.867158] Segment Routing with IPv6 [ 0.867639] In-situ OAM (IOAM) with IPv6 [ 0.868145] NET: Registered PF_PACKET protocol family [ 0.868759] 8021q: 802.1Q VLAN Support v1.8 [ 0.869291] NET: Registered PF_VSOCK protocol family [ 0.869974] IPI shorthand broadcast: enabled [ 0.870520] AVX2 version of gcm_enc/dec engaged. [ 0.871092] AES CTR mode by8 optimization enabled [ 0.871786] sched_clock: Marking stable (780378362, 82715615)->(912091810, -48997833) [ 1.112740] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.124393] ata3: SATA link down (SStatus 0 SControl 300) [ 1.125497] ata1: SATA link down (SStatus 0 SControl 300) [ 1.126394] ata2: SATA link down (SStatus 0 SControl 300) [ 1.127267] ata5: SATA link down (SStatus 0 SControl 300) [ 1.128136] ata4: SATA link down (SStatus 0 SControl 300) [ 1.129003] ata6: SATA link down (SStatus 0 SControl 300) [ 1.130685] EXT4-fs (vda2): mounted filesystem without journal. Opts: (null). Quota mode: disabled. [ 1.131971] VFS: Mounted root (ext4 filesystem) readonly on device 254:2. [ 1.133184] Freeing unused kernel image (initmem) memory: 1588K [ 1.152750] Write protecting the kernel read-only data: 20480k [ 1.154660] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 1.155474] Freeing unused kernel image (rodata/data gap) memory: 528K [ 1.156215] Run /sbin/init as init process [ 1.156717] with arguments: [ 1.156717] /sbin/init [ 1.156717] with environment: [ 1.156718] HOME=/ [ 1.156718] TERM=linux [ 1.156718] BOOT_IMAGE=/boot/vmlinuz [ 1.159255] init: Console is alive [ 1.168199] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 1.170726] Button Hotplug driver version 0.4.1 [ 1.171988] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.172625] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.173397] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 1.180002] init: - preinit - [ 1.201045] 8021q: adding VLAN 0 to HW filter on device eth0 [ 1.315879] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4 [ 1.317185] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.462739] usb 1-4: new high-speed USB device number 3 using ehci-pci [ 1.852762] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3.212867] mount_root: mounting /dev/root [ 3.226627] EXT4-fs (vda2): re-mounted. Opts: (null). Quota mode: disabled. [ 3.240733] urandom-seed: Seeding with /etc/urandom.seed [ 3.242984] procd: - early - [ 3.752381] procd: - ubus - [ 3.802757] procd: - init - [ 3.846751] urngd: v1.0.2 started. [ 3.872531] kmodloader: loading kernel modules from /etc/modules.d/* [ 3.879636] e1000: Intel(R) PRO/1000 Network Driver [ 3.880242] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.881552] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 3.882391] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 3.884171] i2c_dev: i2c /dev entries driver [ 3.885419] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.886170] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 3.886860] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 3.889095] GACT probability on [ 3.889643] Mirror/redirect action on [ 3.891048] u32 classifier [ 3.891437] input device check on [ 3.891911] Actions configured [ 3.895620] Loading modules backported from Linux version v6.5-0-g2dde18cd1d8f [ 3.896530] Backport generated by backports.git v5.15.92-1-56-g5fb2ccb6b9e8 [ 3.897886] e1000e: Intel(R) PRO/1000 Network Driver [ 3.898575] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.899777] Intel(R) 2.5G Ethernet Linux Driver [ 3.900340] Copyright(c) 2018 Intel Corporation. [ 3.909892] PPP generic driver version 2.4.2 [ 3.910612] NET: Registered PF_PPPOX protocol family [ 3.913164] rtw_8822bu 1-4:1.0: Firmware version 27.2.0, H2C version 13 [ 5.020634] usbcore: registered new interface driver rtw_8822bu [ 5.021639] kmodloader: 1 module could not be probed [ 5.022290] kmodloader: - leds-mlxcpld - 0 [ 5.286821] 8021q: adding VLAN 0 to HW filter on device eth0 [ 5.287536] br-lan: port 1(eth0) entered blocking state [ 5.288161] br-lan: port 1(eth0) entered disabled state [ 5.288815] device eth0 entered promiscuous mode [ 5.289522] br-lan: port 1(eth0) entered blocking state [ 5.290152] br-lan: port 1(eth0) entered forwarding state [ 5.294140] 8021q: adding VLAN 0 to HW filter on device eth1 [ 136.541492] ------------[ cut here ]------------ [ 136.542229] write RF mode table fail [ 136.542713] WARNING: CPU: 0 PID: 3597 at 0xffffffffa05683da [ 136.543396] Modules linked in: rtw88_8822bu rtw88_8822b pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet rtw88_usb rtw88_core pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mlxsw_spectrum mac80211 jc42 cfg80211 act_sample slhc regmap_i2c regmap_core r8169 psample parman objagg nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 mlxsw_pci mlxsw_minimal mlxsw_i2c mlxsw_core mlxfw libcrc32c igc forcedeth e1000e crc_ccitt compat bnx2 sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact drivetemp i2c_i801 i2c_smbus i2c_dev ixgbe e1000 amd_xgbe mdio_devres mdio ip6_tunnel tunnel6 ip_tunnel nls_utf8 vxlan [ 136.543442] udp_tunnel ip6_udp_tunnel ena sha512_ssse3 sha512_generic seqiv jitterentropy_rng drbg hmac cmac nls_iso8859_1 nls_cp437 igb vfat fat button_hotplug tg3 realtek libphy [ 136.554587] CPU: 0 PID: 3597 Comm: iw Not tainted 5.15.138 #0 [ 136.555253] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 136.556347] RIP: 0010:0xffffffffa05683da [ 136.556840] Code: 68 87 59 a0 e8 d1 59 4e e1 0f 0b 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f 5d e9 32 85 89 e1 48 c7 c7 fe 86 59 a0 e8 b0 59 4e e1 <0f> 0b e9 62 fd ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 [ 136.558882] RSP: 0018:ffffc9000114f908 EFLAGS: 00010296 [ 136.559502] RAX: 0000000000000018 RBX: ffff8880043ea080 RCX: 0000000000000027 [ 136.560324] RDX: ffff88803ec1c588 RSI: 0000000000000001 RDI: ffff88803ec1c580 [ 136.561188] RBP: ffffc9000114f948 R08: 0000000000000000 R09: ffffc9000114f718 [ 136.562031] R10: ffffc9000114f710 R11: ffffffff824ae3c8 R12: 0000000000000000 [ 136.562833] R13: 0000000000000002 R14: 0000000000000003 R15: 0000000000000000 [ 136.563665] FS: 00007ff7903cab48(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 136.564654] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 136.565349] CR2: 00007ff79032d080 CR3: 000000000524c000 CR4: 0000000000350ef0 [ 136.566155] Call Trace: [ 136.566541] [ 136.566857] ? show_regs.part.0+0x1e/0x24 [ 136.567361] ? show_regs.cold+0x8/0xd [ 136.567828] ? warn+0x74/0xf0 [ 136.568243] ? 0xffffffffa05683da [ 136.568676] ? report_bug+0x86/0xa0 [ 136.569133] ? handle_bug+0x38/0x90 [ 136.569582] ? exc_invalid_op+0x18/0x70 [ 136.570066] ? asm_exc_invalid_op+0x1b/0x20 [ 136.570609] ? 0xffffffffa05683da [ 136.571040] ? 0xffffffffa05683da [ 136.571470] 0xffffffffa0568920 [ 136.571886] rtw_core_enable_beacon+0x1b7/0x1720 [rtw88_core] [ 136.573190] ieee80211_color_change_finish+0x481/0xd30 [mac80211] [ 136.573908] nl80211_parse_chandef+0x1843/0x3790 [cfg80211] [ 136.574564] ? rtnl_unlock+0x9/0x10 [ 136.575019] genl_family_rcv_msg_doit+0xc9/0x110 [ 136.575618] genl_rcv_msg+0xcc/0x1b0 [ 136.576077] ? nl80211_parse_chandef+0x1590/0x3790 [cfg80211] [ 136.576747] ? genl_get_cmd+0xe0/0xe0 [ 136.577222] netlink_rcv_skb+0x52/0x100 [ 136.587357] genl_rcv+0x23/0x40 [ 136.587781] netlink_unicast+0x1ff/0x2e0 [ 136.588275] netlink_sendmsg+0x21d/0x460 [ 136.588797] ? netlink_unicast+0x2e0/0x2e0 [ 136.589338] ____sys_sendmsg+0x232/0x260 [ 136.589832] ? import_iovec+0x4b/0x160 [ 136.590326] _sys_sendmsg+0xb3/0xf0 [ 136.590793] ? mod_memcg_lruvec_state+0x40/0x80 [ 136.591364] ? mod_lruvec_page_state+0x8e/0xe0 [ 136.591926] ? lru_cache_add_inactive_or_unevictable+0x21/0x80 [ 136.592606] ? handle_mm_fault+0x936/0xdf0 [ 136.593140] sys_sendmsg+0x40/0x90 [ 136.593640] ? irqentry_exit+0x1d/0x30 [ 136.594122] x64_sys_sendmsg+0x18/0x20 [ 136.594617] do_syscall_64+0x42/0x90 [ 136.595076] entry_SYSCALL_64_after_hwframe+0x62/0xcc [ 136.595680] RIP: 0033:0x7ff7903a9399 [ 136.596143] Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 e9 c8 cf ff ff 41 54 b8 02 00 00 00 55 48 89 f5 be 00 88 08 00 [ 136.598254] RSP: 002b:00007ffe0c94ac38 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 136.599206] RAX: ffffffffffffffda RBX: 000000000000002e RCX: 00007ff7903a9399 [ 136.600014] RDX: 0000000000000000 RSI: 00007ffe0c94ac88 RDI: 0000000000000003 [ 136.600813] RBP: 00007ff7903cab48 R08: 0000000000000000 R09: 0000000000000000 [ 136.601624] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 136.603033] R13: 00007ff790351df0 R14: 00007ff7903cbec0 R15: 00007ff790347b30 [ 136.603850] [ 136.604181] ---[ end trace 695ab128eba8df53 ]--- [ 138.802068] br-lan: port 2(phy0-ap0) entered blocking state [ 138.802986] br-lan: port 2(phy0-ap0) entered disabled state [ 138.803721] device phy0-ap0 entered promiscuous mode [ 138.804330] br-lan: port 2(phy0-ap0) entered blocking state [ 138.805020] br-lan: port 2(phy0-ap0) entered forwarding state [ 138.805981] br-lan: port 2(phy0-ap0) entered disabled state [ 141.062418] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready [ 141.063408] br-lan: port 2(phy0-ap0) entered blocking state [ 141.064170] br-lan: port 2(phy0-ap0) entered forwarding state

Diffconfig

CONFIG_TARGET_x86=y
CONFIG_TARGET_x86_64=y
CONFIG_TARGET_x86_64_DEVICE_generic=y
CONFIG_DRIVER_11AC_SUPPORT=y
# CONFIG_GRUB_IMAGES is not set
CONFIG_PACKAGE_MAC80211_DEBUGFS=y
CONFIG_PACKAGE_MAC80211_MESH=y
CONFIG_PACKAGE_cgi-io=y
CONFIG_PACKAGE_hostapd-common=y
CONFIG_PACKAGE_iw=y
CONFIG_PACKAGE_iwinfo=y
CONFIG_PACKAGE_kmod-cfg80211=y
CONFIG_PACKAGE_kmod-crypto-aead=y
CONFIG_PACKAGE_kmod-crypto-ccm=y
CONFIG_PACKAGE_kmod-crypto-cmac=y
CONFIG_PACKAGE_kmod-crypto-ctr=y
CONFIG_PACKAGE_kmod-crypto-gcm=y
CONFIG_PACKAGE_kmod-crypto-gf128=y
CONFIG_PACKAGE_kmod-crypto-ghash=y
CONFIG_PACKAGE_kmod-crypto-hmac=y
CONFIG_PACKAGE_kmod-crypto-manager=y
CONFIG_PACKAGE_kmod-crypto-null=y
CONFIG_PACKAGE_kmod-crypto-rng=y
CONFIG_PACKAGE_kmod-crypto-seqiv=y
CONFIG_PACKAGE_kmod-crypto-sha512=y
CONFIG_PACKAGE_kmod-mac80211=y
CONFIG_PACKAGE_kmod-rtw88=y
CONFIG_PACKAGE_kmod-rtw88-8822b=y
CONFIG_PACKAGE_kmod-rtw88-8822bu=y
CONFIG_PACKAGE_kmod-rtw88-usb=y
CONFIG_PACKAGE_kmod-usb-core=y
CONFIG_PACKAGE_libiwinfo=y
CONFIG_PACKAGE_libiwinfo-data=y
CONFIG_PACKAGE_liblucihttp=y
CONFIG_PACKAGE_liblucihttp-ucode=y
CONFIG_PACKAGE_luci-app-firewall=y
CONFIG_PACKAGE_luci-base=y
CONFIG_PACKAGE_luci-light=y
CONFIG_PACKAGE_luci-mod-admin-full=y
CONFIG_PACKAGE_luci-mod-network=y
CONFIG_PACKAGE_luci-mod-status=y
CONFIG_PACKAGE_luci-mod-system=y
CONFIG_PACKAGE_luci-proto-ipv6=y
CONFIG_PACKAGE_luci-proto-ppp=y
CONFIG_PACKAGE_luci-ssl=y
CONFIG_PACKAGE_luci-theme-bootstrap=y
CONFIG_PACKAGE_mesh11sd=y
CONFIG_PACKAGE_px5g-mbedtls=y
CONFIG_PACKAGE_rpcd=y
CONFIG_PACKAGE_rpcd-mod-file=y
CONFIG_PACKAGE_rpcd-mod-iwinfo=y
CONFIG_PACKAGE_rpcd-mod-luci=y
CONFIG_PACKAGE_rpcd-mod-rrdns=y
CONFIG_PACKAGE_rpcd-mod-ucode=y
CONFIG_PACKAGE_rtl8822be-firmware=y
CONFIG_PACKAGE_ucode-mod-html=y
CONFIG_PACKAGE_ucode-mod-math=y
CONFIG_PACKAGE_ucode-mod-nl80211=y
CONFIG_PACKAGE_ucode-mod-rtnl=y
CONFIG_PACKAGE_ucode-mod-uloop=y
CONFIG_PACKAGE_uhttpd=y
CONFIG_PACKAGE_uhttpd-mod-ubus=y
CONFIG_PACKAGE_wireless-regdb=y
CONFIG_PACKAGE_wpad-mesh-mbedtls=y
# CONFIG_TARGET_IMAGES_GZIP is not set
# CONFIG_TARGET_ROOTFS_SQUASHFS is not set
CONFIG_WPA_MSG_MIN_PRIORITY=3

Terms

ptpt52 commented 10 months ago

mark

brada4 commented 10 months ago

QEMU Standard PC (Q35 + ICH9, 2009)

Please verify function on clean hardware and seek guidance with your virtualisation vendor.

mirobiala commented 10 months ago

Please verify function on clean hardware and seek guidance with your virtualisation vendor.

Can you guide me how to do that? It's local QEMU virtual machine with USB Host Device "TP-Link Archer T3U Nano" on my desktop PC.

mirobiala commented 10 months ago

Here is the result on actual TP-Link TL-WR902AC v3 with TP-Link Archer T3U Nano into the USB port:

OpenWrt version

r24396-09b7e1955c

OpenWrt target/subtarget

ramips/mt76x8

Device

TP-Link TL-WR902AC v3

Image kind

Self-built image

Additional info

root@OpenWRT:~# dmesg [ 0.000000] Linux version 5.15.138 (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r24396-09b7e1955c) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 Mon Nov 13 22:33:40 2023 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) [ 0.000000] MIPS: machine is TP-Link TL-WR902AC v3 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240 [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.000000] Writing ErrCtl register=00056bc6 [ 0.000000] Readback ErrCtl register=00056bc6 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 56028K/65536K available (5553K kernel code, 594K rwdata, 1208K rodata, 1212K init, 208K bss, 9508K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] intc: using register map from devicetree [ 0.000000] CPU Clock: 580MHz [ 0.000000] timer_probe: no matching timers found [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000002] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.007623] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.073554] pid_max: default: 32768 minimum: 301 [ 0.079114] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.086137] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.102347] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.111889] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.118642] pinctrl core: initialized pinctrl subsystem [ 0.125586] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.402365] PCI host bridge to bus 0000:00 [ 0.406350] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] [ 0.412942] pci_bus 0000:00: root bus resource [io 0x10160000-0x1016ffff] [ 0.419585] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.427334] pci 0000:00:00.0: [14c3:0801] type 01 class 0x060400 [ 0.433114] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 0.439131] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 0.445263] pci 0000:00:00.0: supports D1 [ 0.449073] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.456213] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.464174] pci 0000:01:00.0: [14c3:7650] type 00 class 0x028000 [ 0.469996] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 0.476138] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.482337] pci 0000:01:00.1: [14c3:8650] type 00 class 0x0d1100 [ 0.488122] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x000fffff] [ 0.494324] pci 0000:01:00.1: supports D1 [ 0.498132] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold [ 0.505767] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.512121] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.518570] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 0.524904] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 0.531637] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] [ 0.538177] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] [ 0.544746] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] [ 0.551285] pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.557848] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.562624] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] [ 0.569729] clocksource: Switched to clocksource MIPS [ 0.576148] NET: Registered PF_INET protocol family [ 0.581174] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.589045] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.597179] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.604629] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.612032] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.618822] TCP: Hash tables configured (established 1024 bind 1024) [ 0.625162] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.631517] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.638674] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.644281] PCI: CLS 0 bytes, default 32 [ 0.652862] workingset: timestamp_bits=14 max_order=14 bucket_order=0 [ 0.665670] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.671350] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.684240] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.689956] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.695683] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.701810] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.709212] printk: console [ttyS0] disabled [ 0.713458] 10000c00.uart0: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A [ 0.721958] printk: console [ttyS0] enabled [ 0.730366] printk: bootconsole [early0] disabled [ 0.741471] spi-mt7621 10000b00.spi: sys_freq: 193333333 [ 0.763549] spi-nor spi0.0: gd25q64 (8192 Kbytes) [ 0.768420] 4 fixed-partitions partitions found on MTD device spi0.0 [ 0.774990] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions [ 0.782467] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions [ 0.790216] Creating 4 MTD partitions on "spi0.0": [ 0.795095] 0x000000000000-0x000000020000 : "boot" [ 0.803346] 0x000000020000-0x0000007c0000 : "firmware" [ 0.810550] 2 tplink-fw partitions found on MTD device firmware [ 0.816591] Creating 2 MTD partitions on "firmware": [ 0.821753] 0x000000000000-0x000000230e5d : "kernel" [ 0.826797] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only [ 0.838439] 0x000000230e60-0x0000007a0000 : "rootfs" [ 0.843582] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only [ 0.854262] mtd: setting mtd3 (rootfs) as root device [ 0.860661] 1 squashfs-split partitions found on MTD device rootfs [ 0.866981] 0x000000620000-0x0000007a0000 : "rootfs_data" [ 0.873924] 0x0000007c0000-0x0000007d0000 : "config" [ 0.882287] 0x0000007d0000-0x000000800000 : "factory" [ 0.947898] rt3050-esw 10110000.esw: mediatek esw at 0xb0110000, irq 25 initialized [ 0.956651] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 0.967278] NET: Registered PF_INET6 protocol family [ 0.978321] Segment Routing with IPv6 [ 0.982268] In-situ OAM (IOAM) with IPv6 [ 0.986386] NET: Registered PF_PACKET protocol family [ 0.991651] 8021q: 802.1Q VLAN Support v1.8 [ 1.012468] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. [ 1.026307] Freeing unused kernel image (initmem) memory: 1212K [ 1.032362] This architecture does not have kernel memory protection. [ 1.038903] Run /sbin/init as init process [ 1.043063] with arguments: [ 1.043069] /sbin/init [ 1.043076] with environment: [ 1.043081] HOME=/ [ 1.043087] TERM=linux [ 1.901684] init: Console is alive [ 1.905838] init: - watchdog - [ 3.548908] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 3.647999] usbcore: registered new interface driver usbfs [ 3.653820] usbcore: registered new interface driver hub [ 3.659346] usbcore: registered new device driver usb [ 3.673847] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.684820] fsl-ehci: Freescale EHCI Host controller driver [ 3.692680] ehci-platform: EHCI generic platform driver [ 3.708482] phy phy-10120000.usbphy.0: remote usb device wakeup disabled [ 3.715316] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz [ 3.720627] ehci-platform 101c0000.ehci: EHCI Host Controller [ 3.726544] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 3.734745] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 3.769752] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 3.777340] hub 1-0:1.0: USB hub found [ 3.782171] hub 1-0:1.0: 1 port detected [ 3.794911] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.803099] ohci-platform: OHCI generic platform driver [ 3.808865] ohci-platform 101c1000.ohci: Generic Platform OHCI controller [ 3.815881] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 [ 3.824106] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 [ 3.904853] hub 2-0:1.0: USB hub found [ 3.909630] hub 2-0:1.0: 1 port detected [ 3.924826] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 3.934760] init: - preinit - [ 4.090118] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 4.816083] random: procd: uninitialized urandom read (4 bytes read) [ 4.845627] rt3050-esw 10110000.esw: port 4 link up [ 5.712658] random: jshn: uninitialized urandom read (4 bytes read) [ 5.831223] random: jshn: uninitialized urandom read (4 bytes read) [ 5.956085] random: jshn: uninitialized urandom read (4 bytes read) [ 6.025963] random: jshn: uninitialized urandom read (4 bytes read) [ 6.457814] rt3050-esw 10110000.esw: port 4 link down [ 8.873649] jffs2: notice: (287) jffs2_build_xattr_subsystem: complete building xattr subsystem, 11 of xdatum (0 unchecked, 1 orphan) and 13 of xref (1 dead, 0 orphan) found. [ 8.892063] mount_root: switching to jffs2 overlay [ 8.909395] overlayfs: upper fs does not support tmpfile. [ 8.924477] urandom-seed: Seeding with /etc/urandom.seed [ 9.061962] procd: - early - [ 9.065333] procd: - watchdog - [ 9.938921] procd: - watchdog - [ 9.944542] procd: - ubus - [ 10.111243] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.120973] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.128131] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.139331] procd: - init - [ 10.360983] rt3050-esw 10110000.esw: port 4 link up [ 11.366792] random: jshn: uninitialized urandom read (4 bytes read) [ 11.435593] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.637854] kmodloader: loading kernel modules from /etc/modules.d/ [ 12.250491] Loading modules backported from Linux version v6.5-0-g2dde18cd1d8f [ 12.257850] Backport generated by backports.git v5.15.92-1-56-g5fb2ccb6b9e8 [ 12.844010] mt76_wmac 10300000.wmac: ASIC revision: 76280001 [ 13.902061] mt76_wmac 10300000.wmac: Firmware Version: 20151201 [ 13.908104] mt76_wmac 10300000.wmac: Build Time: 20151201183641 [ 13.959746] mt76_wmac 10300000.wmac: firmware init done [ 14.131938] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 14.417685] PPP generic driver version 2.4.2 [ 14.460986] NET: Registered PF_PPPOX protocol family [ 14.548559] mt76x0e 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4 [ 14.555264] mt76x0e 0000:01:00.0: ASIC revision: 76100002 [ 14.661416] mt76x0e 0000:01:00.0: Firmware Version: 0.1.00 [ 14.710236] urngd: v1.0.2 started. [ 14.920770] mt76x0e 0000:01:00.0: EEPROM ver:02 fae:00 [ 14.942516] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 15.390605] rtw_8822bu 1-1:1.0: Firmware version 27.2.0, H2C version 13 [ 15.839206] usbcore: registered new interface driver rtw_8822bu [ 15.860279] kmodloader: done loading kernel modules from /etc/modules.d/* [ 19.472527] random: crng init done [ 19.476010] random: 24 urandom warning(s) missed due to ratelimiting [ 31.427647] rt3050-esw 10110000.esw: port 4 link down [ 35.295766] rt3050-esw 10110000.esw: port 4 link up [ 46.346946] ------------[ cut here ]------------ [ 46.351715] WARNING: CPU: 0 PID: 2078 at backports-6.5/drivers/net/wireless/realtek/rtw88/rtw8822b.c:823 0x81ec37ac [ 46.362348] write RF mode table fail [ 46.365970] Modules linked in: rtw88_8822bu rtw88_8822b pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet mt76x0e mt76x0_common rtw88_usb rtw88_core pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt76x02_lib mt7603e mt76 mac80211 cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c crc_ccitt compat ledtrig_usbport sha512_generic seqiv jitterentropy_rng drbg hmac cmac leds_gpio ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc32c_generic [ 46.441363] CPU: 0 PID: 2078 Comm: iw Not tainted 5.15.138 #0 [ 46.447213] Stack : 00000000 00000000 8286da24 80860000 806a0000 805fd51c 82a79d80 806a3e23 [ 46.455751] 808633b4 0000081e 00000000 800619e4 805f6c6c 00000001 8286d9e0 5fe48702 [ 46.464281] 00000000 00000000 805fd51c 8286d878 ffffefff 00000000 00000000 ffffffea [ 46.472806] 00000000 8286d884 000000cc 806aa238 80860000 00000009 00000000 81ec37ac [ 46.481326] 00000009 00000000 806a0000 0000002c 00000018 8032eb30 00000000 80860000 [ 46.489849] ... [ 46.492334] Call Trace: [ 46.494809] [<80006e4c>] show_stack+0x28/0xf0 [ 46.499261] [<80026068>] warn+0x9c/0x124 [ 46.503441] [<8002617c>] warn_slowpath_fmt+0x8c/0xac [ 46.508487] [<81ec37ac>] 0x81ec37ac [ 46.512037] [ 46.513545] ---[ end trace d33672b0ddd7acab ]--- [ 50.282532] br-lan: port 1(phy2-ap0) entered blocking state [ 50.288222] br-lan: port 1(phy2-ap0) entered disabled state [ 50.294369] device phy2-ap0 entered promiscuous mode [ 51.938024] IPv6: ADDRCONF(NETDEV_CHANGE): phy2-ap0: link becomes ready [ 51.945172] br-lan: port 1(phy2-ap0) entered blocking state [ 51.950892] br-lan: port 1(phy2-ap0) entered forwarding state [ 52.089974] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 65.341092] device phy2-ap0 left promiscuous mode [ 65.346023] br-lan: port 1(phy2-ap0) entered disabled state [ 66.587811] ------------[ cut here ]------------ [ 66.592561] WARNING: CPU: 0 PID: 2541 at backports-6.5/drivers/net/wireless/realtek/rtw88/rtw8822b.c:823 0x81ec37ac [ 66.603196] write RF mode table fail [ 66.606826] Modules linked in: rtw88_8822bu rtw88_8822b pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet mt76x0e mt76x0_common rtw88_usb rtw88_core pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt76x02_lib mt7603e mt76 mac80211 cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c crc_ccitt compat ledtrig_usbport sha512_generic seqiv jitterentropy_rng drbg hmac cmac leds_gpio ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc32c_generic [ 66.682215] CPU: 0 PID: 2541 Comm: iw Tainted: G W 5.15.138 #0 [ 66.689462] Stack : 00000000 00000000 82a87a24 80860000 806a0000 805fd51c 82b26800 806a3e23 [ 66.698004] 808633b4 000009ed 00000000 800619e4 805f6c6c 00000001 82a879e0 093ac891 [ 66.706537] 00000000 00000000 805fd51c 82a87878 ffffefff 00000000 00000000 ffffffea [ 66.715062] 00000000 82a87884 000000e7 806aa238 80860000 00000009 00000000 81ec37ac [ 66.723586] 00000009 00000000 806a0000 0000002c 00000018 8032eb30 00000000 80860000 [ 66.732106] ... [ 66.734588] Call Trace: [ 66.737063] [<80006e4c>] show_stack+0x28/0xf0 [ 66.741528] [<80026068>] warn+0x9c/0x124 [ 66.745698] [<8002617c>] warn_slowpath_fmt+0x8c/0xac [ 66.750754] [<81ec37ac>] 0x81ec37ac [ 66.754297] [ 66.755804] ---[ end trace d33672b0ddd7acac ]--- [ 69.801852] br-lan: port 1(phy2-ap0) entered blocking state [ 69.807586] br-lan: port 1(phy2-ap0) entered disabled state [ 69.813659] device phy2-ap0 entered promiscuous mode [ 69.819034] br-lan: port 1(phy2-ap0) entered blocking state [ 69.824766] br-lan: port 1(phy2-ap0) entered forwarding state [ 69.834408] br-lan: port 1(phy2-ap0) entered disabled state [ 71.799970] IPv6: ADDRCONF(NETDEV_CHANGE): phy2-ap0: link becomes ready [ 71.807036] br-lan: port 1(phy2-ap0) entered blocking state [ 71.812772] br-lan: port 1(phy2-ap0) entered forwarding state [ 71.880167] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

Diffconfig

CONFIG_TARGET_ramips=y
CONFIG_TARGET_ramips_mt76x8=y
CONFIG_TARGET_ramips_mt76x8_DEVICE_tplink_tl-wr902ac-v3=y
CONFIG_PACKAGE_cgi-io=y
CONFIG_PACKAGE_kmod-rtw88=y
CONFIG_PACKAGE_kmod-rtw88-8822b=y
CONFIG_PACKAGE_kmod-rtw88-8822bu=y
CONFIG_PACKAGE_kmod-rtw88-usb=y
CONFIG_PACKAGE_liblucihttp=y
CONFIG_PACKAGE_liblucihttp-ucode=y
CONFIG_PACKAGE_luci-app-firewall=y
CONFIG_PACKAGE_luci-base=y
CONFIG_PACKAGE_luci-light=y
CONFIG_PACKAGE_luci-mod-admin-full=y
CONFIG_PACKAGE_luci-mod-network=y
CONFIG_PACKAGE_luci-mod-status=y
CONFIG_PACKAGE_luci-mod-system=y
CONFIG_PACKAGE_luci-proto-ipv6=y
CONFIG_PACKAGE_luci-proto-ppp=y
CONFIG_PACKAGE_luci-ssl=y
CONFIG_PACKAGE_luci-theme-bootstrap=y
CONFIG_PACKAGE_mesh11sd=y
CONFIG_PACKAGE_px5g-mbedtls=y
CONFIG_PACKAGE_rpcd=y
CONFIG_PACKAGE_rpcd-mod-file=y
CONFIG_PACKAGE_rpcd-mod-iwinfo=y
CONFIG_PACKAGE_rpcd-mod-luci=y
CONFIG_PACKAGE_rpcd-mod-rrdns=y
CONFIG_PACKAGE_rpcd-mod-ucode=y
CONFIG_PACKAGE_rtl8822be-firmware=y
CONFIG_PACKAGE_ucode-mod-html=y
CONFIG_PACKAGE_ucode-mod-math=y
CONFIG_PACKAGE_uhttpd=y
CONFIG_PACKAGE_uhttpd-mod-ubus=y
# CONFIG_PACKAGE_wpad-basic-mbedtls is not set
CONFIG_PACKAGE_wpad-mesh-mbedtls=y
bluecmd commented 10 months ago

I have the same issue with building from master (@ 255d5c9bf8430bea8ee342b0132be0787b509634) using a ALFA AWUS036ACU on a Cisco vEdge 1000

Snippet:

root@OpenWrt:/# [  113.150025] ------------[ cut here ]------------
[  113.154667] WARNING: CPU: 1 PID: 4862 at backports-6.5/drivers/net/wireless/realtek/rtw88/rtw8822b.c:823 rtw8822b_set_antenna+0x50/0xa8 [rtw88_8822b]
[  113.168119] write RF mode table fail
[  113.171701] Modules linked in: rtw88_8822bu rtw88_8822b pppoe ppp_async nft_fib_inet nf_flow_table_inet wireguard rtw88_usb rtw88_core rtl8xxxu pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject_bridge nfv
[  113.171984]  ledtrig_usbport cryptodev ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel ipcomp esp4 ah4 tunnel6 tunnel4 ip_tunnel tun xfrm_user xfrm_ipcomp af_key xfrm_algo marvell vxlan udp_tunnel ip6_udp_tunnel crypto_user algif_skcipi
[  113.308751] CPU: 1 PID: 4862 Comm: iw Tainted: G         C         6.1.62 #0
[  113.315818] Stack : 0000000000000000 0000000000000008 8000000005fe9100 80000000f009aa00
[  113.323849]         0000000000000000 80000000f5ba3650 ffffffff81a3dcb0 80000000f5ba35f0
[  113.331879]         0000000000000000 c0000000ffffefff 0000000000000001 ffffffffffffffea
[  113.339909]         0000000000000010 ffffffff81935000 fffffffffffe0000 80000000f5ba3535
[  113.347937]         ffffffff81a3dcb0 0000000000000001 0000000000000009 0000000000000009
[  113.355967]         ffffffffc05f02f0 0000000000000337 ffffffffc05f0330 80000000f58e03c0
[  113.363997]         8000000175ba3527 ffffffff81581ba8 0000000000000000 0000000000000000
[  113.372025]         80000000f5ba0000 80000000f5ba3650 80000000f5ba3dd8 ffffffff8190d6c4
[  113.380055]         0000000000000000 f948303aec9d40de 0000000000000001 ffffffff81a3dcb0
[  113.388084]         ffffffff81c31183 ffffffff8111a940 80000000f03b0e00 ffffffff8190d624
[  113.396113]         ...
[  113.398566] Call Trace:
[  113.401015] [<ffffffff8111a940>] show_stack+0x28/0xf0
[  113.406092] [<ffffffff8190d6c4>] dump_stack_lvl+0x5c/0x7c
[  113.411513] [<ffffffff8113aad8>] __warn+0x98/0xe0
[  113.416229] [<ffffffff8113ace0>] warn_slowpath_fmt+0x1c0/0x1c8
[  113.422076] [<ffffffffc05c0c10>] rtw8822b_set_antenna+0x50/0xa8 [rtw88_8822b]
[  113.429243] [<ffffffffc055a79c>] rtw_ops_set_antenna+0x64/0xa8 [rtw88_core]
[  113.436271] [<ffffffffc02db65c>] nl80211_set_wiphy+0x324/0x7a0 [cfg80211]
[  113.443171] [<ffffffff81771a48>] genl_family_rcv_msg_doit+0xd8/0x138
[  113.449542] [<ffffffff81771da4>] genl_rcv_msg+0x114/0x268
[  113.454953] [<ffffffff81770668>] netlink_rcv_skb+0xa8/0x148
[  113.460538] [<ffffffff817711c0>] genl_rcv+0x30/0x48
[  113.465427] [<ffffffff8176fa10>] netlink_unicast+0x238/0x380
[  113.471100] [<ffffffff8176fe40>] netlink_sendmsg+0x2e8/0x4f8
[  113.476772] [<ffffffff816dfd50>] ____sys_sendmsg+0xd0/0x2b8
[  113.482360] [<ffffffff816e1a88>] ___sys_sendmsg+0x80/0xd8
[  113.487773] [<ffffffff816e1f04>] __sys_sendmsg+0x4c/0xc0
[  113.493099] [<ffffffff81123b48>] syscall_common+0x34/0x58
[  113.498517] 
[  113.500034] ---[ end trace 0000000000000000 ]---
bluecmd commented 10 months ago

FWIW, this also happens when I put the interface in client mode, so I do not believe this to be limited to being an access point. However, even though the error above is shown OpenWrt is able to connect to the network and seems to work as far as I can tell.

mirobiala commented 9 months ago

On TP-Link TL-WR902AC v3 with TP-Link Archer T3U Nano into the USB port as Access Point:

[   46.691492] ------------[ cut here ]------------
[   46.696400] WARNING: CPU: 0 PID: 2132 at backports-6.5/drivers/net/wireless/realtek/rtw88/rtw8822b.c:823 0x81ec37ac
[   46.707067] write RF mode table fail
[   46.710700] Modules linked in: rtw88_8822bu rtw88_8822b pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet mt76x0e mt76x0_common rtw88_usb rtw88_core pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt76x02_lib mt7603e mt76 mac80211 cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c crc_ccitt compat ledtrig_usbport sha512_generic seqiv jitterentropy_rng drbg hmac cmac leds_gpio ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc32c_generic
[   46.786099] CPU: 0 PID: 2132 Comm: iw Not tainted 5.15.138 #0
[   46.791945] Stack : 00000000 00000000 82a9ba24 80860000 806a0000 805fd51c 82a6cdc0 806a3e23
[   46.800476]         808633b4 00000854 00000000 800619e4 805f6c6c 00000001 82a9b9e0 9b27ddae
[   46.808999]         00000000 00000000 805fd51c 82a9b878 ffffefff 00000000 00000000 ffffffea
[   46.817522]         00000000 82a9b884 000000cb 806aa238 80860000 00000009 00000000 81ec37ac
[   46.826046]         00000009 00000000 806a0000 0000002c 00000018 8032eb30 00000000 80860000
[   46.834569]         ...
[   46.837054] Call Trace:
[   46.839529] [<80006e4c>] show_stack+0x28/0xf0
[   46.843994] [<80026068>] __warn+0x9c/0x124
[   46.848163] [<8002617c>] warn_slowpath_fmt+0x8c/0xac
[   46.853220] [<81ec37ac>] 0x81ec37ac
[   46.856765] 
[   46.858272] ---[ end trace 812dfed4857d3ee6 ]---
[   51.148408] br-lan: port 1(phy2-ap0) entered blocking state
[   51.154213] br-lan: port 1(phy2-ap0) entered disabled state
[   51.160239] device phy2-ap0 entered promiscuous mode
[   51.165666] br-lan: port 1(phy2-ap0) entered blocking state
[   51.171346] br-lan: port 1(phy2-ap0) entered forwarding state
[   51.195911] br-lan: port 1(phy2-ap0) entered disabled state
[   53.962376] IPv6: ADDRCONF(NETDEV_CHANGE): phy2-ap0: link becomes ready
[   53.969449] br-lan: port 1(phy2-ap0) entered blocking state
[   53.975186] br-lan: port 1(phy2-ap0) entered forwarding state
[   54.081814] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   66.633875] device phy2-ap0 left promiscuous mode
[   66.638804] br-lan: port 1(phy2-ap0) entered disabled state
[   68.881072] ------------[ cut here ]------------
[   68.885874] WARNING: CPU: 0 PID: 3030 at backports-6.5/drivers/net/wireless/realtek/rtw88/rtw8822b.c:823 0x81ec37ac
[   68.896518] write RF mode table fail
[   68.900154] Modules linked in: rtw88_8822bu rtw88_8822b pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet mt76x0e mt76x0_common rtw88_usb rtw88_core pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt76x02_lib mt7603e mt76 mac80211 cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c crc_ccitt compat ledtrig_usbport sha512_generic seqiv jitterentropy_rng drbg hmac cmac leds_gpio ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc32c_generic
[   68.975738] CPU: 0 PID: 3030 Comm: iw Tainted: G        W         5.15.138 #0
[   68.983043] Stack : 00000000 00000000 82b5ba24 80860000 806a0000 805fd51c 82b262c0 806a3e23
[   68.991563]         808633b4 00000bd6 00000000 800619e4 805f6c6c 00000001 82b5b9e0 dd1a8313
[   69.000093]         00000000 00000000 805fd51c 82b5b878 ffffefff 00000000 00000000 ffffffea
[   69.008619]         00000000 82b5b884 000000e9 806aa238 80860000 00000009 00000000 81ec37ac
[   69.017143]         00000009 00000000 806a0000 0000002c 00000018 8032eb30 00000000 80860000
[   69.025667]         ...
[   69.028152] Call Trace:
[   69.030627] [<80006e4c>] show_stack+0x28/0xf0
[   69.035093] [<80026068>] __warn+0x9c/0x124
[   69.039264] [<8002617c>] warn_slowpath_fmt+0x8c/0xac
[   69.044320] [<81ec37ac>] 0x81ec37ac
[   69.047866] 
[   69.049373] ---[ end trace 812dfed4857d3ee7 ]---
[   73.405132] br-lan: port 1(phy2-ap0) entered blocking state
[   73.410867] br-lan: port 1(phy2-ap0) entered disabled state
[   73.416948] device phy2-ap0 entered promiscuous mode
[   73.422369] br-lan: port 1(phy2-ap0) entered blocking state
[   73.428049] br-lan: port 1(phy2-ap0) entered forwarding state
[   73.442878] br-lan: port 1(phy2-ap0) entered disabled state
[   75.191625] IPv6: ADDRCONF(NETDEV_CHANGE): phy2-ap0: link becomes ready
[   75.198752] br-lan: port 1(phy2-ap0) entered blocking state
[   75.204487] br-lan: port 1(phy2-ap0) entered forwarding state
[   75.282429] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

At that point AP link becomes active, but when a client tries to connect:

[  174.612005] rtw_8822bu 1-1:1.0: timed out to flush queue 3

... and the client disconnects.

hauke commented 9 months ago

This looks like a problem in the upstream driver, please report this to the upstream Linux wireless mailing list.

mirobiala commented 9 months ago

It turns out that these are two different problems:

  1. For the call trace there is a patch :https://patchwork.kernel.org/project/linux-wireless/patch/20231012140120.891411-1-amadeus@jmu.edu.cn/
  2. For the disconnection issue I found another discussion : https://github.com/lwfinger/rtw88/issues/151, but looks like there is no fix for now.