This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
Other
20.3k
stars
10.5k
forks
source link
FS#2496 - WPA3-SAE can't be enabled on mt76 device #7285
LinuxKernel1:
Device: Netgear EX2700
Version: OpenWrt 19.07-SNAPSHOT r10532-cf3b50377e / LuCI openwrt-19.07 branch (git-19.256.45060-8a2f1c7)
Steps to reproduce: Enable WPA3 or WPA3-Mixed Mode via LuCI.
Result: Wifi won't come up. Works fine with WPA2.
Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740004] device wlan0 left promiscuous mode Sun Sep 15 20:08:18 2019 kern.info kernel: [ 1638.740123] br-lan: port 2(wlan0) entered disabled state Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED Sun Sep 15 20:08:18 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:18 2019 daemon.notice netifd: Network device 'wlan0-1' link is down Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.020561] br-guest: port 2(wlan0-1) entered disabled state Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023338] device wlan0-1 left promiscuous mode Sun Sep 15 20:08:19 2019 kern.info kernel: [ 1639.023357] br-guest: port 2(wlan0-1) entered disabled state Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0-1 from bridge br-guest: No such device Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: AP-DISABLED Sun Sep 15 20:08:19 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0 Sun Sep 15 20:08:19 2019 daemon.notice hostapd: nl80211: Failed to remove interface wlan0 from bridge br-lan: Invalid argument Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff Sun Sep 15 20:08:19 2019 daemon.notice netifd: radio0 (1867): command failed: Not supported (-122) Sun Sep 15 20:08:19 2019 user.notice mac80211: Failed command: iw phy phy0 set distance 0 Sun Sep 15 20:08:19 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.912716] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start Sun Sep 15 20:08:21 2019 kern.info kernel: [ 1639.913245] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.824164] ieee80211 phy0: rt2800_loft_iq_calibration: Info - LOFT Calibration Done! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.828164] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.842569] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 0, phase=3f) Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.843488] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857895] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 0, phase= 2) Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.857931] ieee80211 phy0: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done! Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.871433] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=-6 Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.881694] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=2 Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.888849] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894441] br-lan: port 2(wlan0) entered blocking state Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894456] br-lan: port 2(wlan0) entered disabled state Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.894799] device wlan0 entered promiscuous mode Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE Sun Sep 15 20:08:22 2019 daemon.err hostapd: Using interface wlan0 with hwaddr XX:XX:XX:XX:XX:XX and ssid "HOME" Sun Sep 15 20:08:22 2019 daemon.err hostapd: Interface initialization failed Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994731] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994904] br-lan: port 2(wlan0) entered blocking state Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1641.994914] br-lan: port 2(wlan0) entered forwarding state Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED Sun Sep 15 20:08:22 2019 daemon.err hostapd: wlan0: Unable to setup interface. Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0-1 wasn't started Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: AP-DISABLED Sun Sep 15 20:08:22 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING Sun Sep 15 20:08:22 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started Sun Sep 15 20:08:22 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0 Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002616] device wlan0 left promiscuous mode Sun Sep 15 20:08:22 2019 kern.info kernel: [ 1642.002723] br-lan: port 2(wlan0) entered disabled state Sun Sep 15 20:08:22 2019 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x77d76c60 user_data=0 handler=0x46a4f5 Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process 1120 path () Sun Sep 15 20:08:22 2019 daemon.notice netifd: radio0 (1867): Device setup failed: HOSTAPD_START_FAILED