search

openzfs / zfs

OpenZFS on Linux and FreeBSD
https://openzfs.github.io/openzfs-docs
Other
10.64k stars 1.75k forks source link

Kernel panic - not syncing: An NMI occurred #4102

Closed laris closed 8 years ago

laris commented 8 years ago

Proxmox 4.0

Linux version 4.2.2-1-pve (root@elsa) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Mon Oct 5 18:23:31 CEST 2015 () [ 0.000000] Command line: BOOT_IMAGE=/ROOT/pve-1@/boot/vmlinuz-4.2.2-1-pve ro ot=ZFS=/ROOT/pve-1 ro boot=zfs root=ZFS=rpool/ROOT/pve-1 boot=zfs console=tty0 c onsole=ttyS0,115200

$ ssh root@192.168.1.111 root@192.168.1.111's password: User:root logged-in to iLOHPMSGen8-2.(192.168.1.112 / )

iLO 4 Advanced 2.30 at Aug 19 2015 Server Name: HPMSGen8-2 Server Power: On

Based on customer feedback, we will be enhancing the SSH command line interface in a future release of the iLO 4 firmware. Our future CLI will focus on increased usability and improved functionality. This message is to provide advance notice of the coming change. Please see the iLO 4 Release Notes on www.hp.com/go/iLO for additional information.

</>hpiLO-> vsp

Virtual Serial Port Active: COM1

Starting virtual serial port. Press 'ESC (' to return to the CLI Session. 16 GB Installed

ProLiant System BIOS - J06 (07/16/2015) Copyright 1982, 2015 Hewlett-Packard Development Company, L.P.

1 Processor(s) detected, 4 total cores enabled, , Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz HP Power Profile Mode: Balanced Power and Performance Power Regulator Mode: Dynamic Power Savings

Redundant ROM Detected - This system contains a valid backup System ROM. Inlet Ambient Temperature: 21C/69F

HP AHCI SATA Controller (v0.90) Copyright (c) 2011, Hewlett-Packard Development Company, L.P. Port1: S.M.A.R.T Capable Hard Disk - WDC WD30EZRX-00D8PB0 Port2: S.M.A.R.T Capable Hard Disk - WDC WD30EZRX-00D8PB0 Port3: S.M.A.R.T Capable Hard Disk - WDC WD30EZRZ-00WN9B0 Port4: S.M.A.R.T Capable Hard Disk - WDC WD30EZRZ-00WN9B0 <F9 = Setup> Port5: S.M.A.R.T Capable Hard Disk - MTFDDAK512MAM-1K1

HP AHCI SATA Controller (v0.84)

Copyright (c) 2011, Hewlett-Packard Development Company, L.P.

iLO 4 Advanced iLO 4 v2.30 Aug 19 2015 192.168.1.112

LSI Corporation MPT SAS2 BIOS MPT2BIOS-7.21.00.00 (2011.08.11) Copyright 2000-2011 LSI Corporation.

                                                                                                                                                                                                                                                   PCI  ENCL LUN VENDOR   PRODUCT          PRODUCT     SIZE \

SLOT SLOT NUM NAME IDENTIFIER REVISION NVDATA

1 LSI SAS2008-IT 11.00.00.00 0A:03:00:04

LSI Corporation MPT boot ROM, no supported devices found! Press "F9" key for ROM-Based Setup Utility Press "F10" key for Intelligent Provisioning Press "F11" key for Default Boot Override Options For access via BIOS Serial Console Press "ESC+9" for ROM-Based Setup Utility Press "ESC+0" for Intelligent Provisioning Press "ESC+!" for Default Boot Override Options Attempting Boot From Hard Drive (C:) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.2-1-pve (root@elsa) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Mon Oct 5 18:23:31 CEST 2015 () [ 0.000000] Command line: BOOT_IMAGE=/ROOT/pve-1@/boot/vmlinuz-4.2.2-1-pve ro ot=ZFS=/ROOT/pve-1 ro boot=zfs root=ZFS=rpool/ROOT/pve-1 boot=zfs console=tty0 c onsole=ttyS0,115200 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point regis ters' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes , using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000099800-0x0000000000099bff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000f1de3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f1de4000-0x00000000f1dedfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000f1dee000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000040bffefff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] e820: las= 0x40bfff max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xf1de4 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff 8800000f4f80] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x40bc00000-0x40bdfffff] [ 0.000000] init_memory_mapping: [mem 0x400000000-0x40bbfffff] [ 0.000000] init_memory_mapping: [mem 0x3e0000000-0x3ffffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0xf1de3fff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3dfffffff] [ 0.000000] init_memory_mapping: [mem 0x40be00000-0x40bffefff] [ 0.000000] RAMDISK: [mem 0x34fa0000-0x367c7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP ) [ 0.000000] ACPI: XSDT 0x00000000F1DE6400 0000B4 (v01 HP ProLiant 0000000 2 ▒? 0000162E) [ 0.000000] ACPI: FACP 0x00000000F1DE6540 0000F4 (v03 HP ProLiant 0000000 2 ▒? 0000162E) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aContr olBlock: 16/32 (20150619/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2Contro lBlock: 8/32 (20150619/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock : 32, using default 16 (20150619/tbfadt-704) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20150619/tbfadt-704) [ 0.000000] ACPI: DSDT 0x00000000F1DE6640 001C1A (v01 HP DSDT 0000000 1 INTL 20030228) [ 0.000000] ACPI: FACS 0x00000000F1DE4140 000040 [ 0.000000] ACPI: FACS 0x00000000F1DE4140 000040 [ 0.000000] ACPI: SPCR 0x00000000F1DE4180 000050 (v01 HP SPCRRBSU 0000000 1 ▒? 0000162E) [ 0.000000] ACPI: MCFG 0x00000000F1DE4200 00003C (v01 HP ProLiant 000 00000000) [ 0.000000] ACPI: HPET 0x00000000F1DE4240 000038 (v01 HP ProLiant 0000000 2 ▒? 0000162E) [ 0.000000] ACPI: FFFF 0x00000000F1DE4280 000064 (v02 HP ProLiant 0000000 2 ▒? 0000162E) [ 0.000000] ACPI: SPMI 0x00000000F1DE4300 000040 (v05 HP ProLiant 0000000 1 ▒? 0000162E) [ 0.000000] ACPI: ERST 0x00000000F1DE4340 000230 (v01 HP ProLiant 0000000 1 ▒? 0000162E) [ 0.000000] ACPI: APIC 0x00000000F1DE4580 000252 (v01 HP ProLiant 0000000 2 00000000) [ 0.000000] ACPI: FFFF 0x00000000F1DE4800 000176 (v01 HP ProLiant 0000000 1 ▒? 0000162E) [ 0.000000] ACPI: BERT 0x00000000F1DE4980 000030 (v01 HP ProLiant 0000000 1 ▒? 0000162E) [ 0.000000] ACPI: HEST 0x00000000F1DE49C0 0000BC (v01 HP ProLiant 0000000 1 ▒? 0000162E) [ 0.000000] ACPI: DMAR 0x00000000F1DE4A80 0003B4 (v01 HP ProLiant 0000000 1 ▒? 0000162E) [ 0.000000] ACPI: FFFF 0x00000000F1DE63C0 00002D (v01 HP ProLiant 0000000 1 00000000) [ 0.000000] ACPI: SSDT 0x00000000F1DE8280 000137 (v03 HP CRSPCI0 0000000 2 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000F1DE83C0 000177 (v03 HP riser0 0000000 2 INTL 20030228) [ 0.000000] ACPI: SSDT 0x00000000F1DE8540 0001E1 (v01 HP pcc 0000000 1 INTL 20090625) [ 0.000000] ACPI: SSDT 0x00000000F1DE8740 000377 (v01 HP pmab 0000000 1 INTL 20090625) [ 0.000000] ACPI: SSDT 0x00000000F1DE8AC0 0013A4 (v01 INTEL PPM RCM 8000000 1 INTL 20061109) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000040bffefff] [ 0.000000] NODE_DATA(0) allocated [mem 0x40bffa000-0x40bffefff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000040bffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000001000-0x0000000000098fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000f1de3fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000040bffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000040bffefff] [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 64 CPUs, 56 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf1de4000-0xf1dedfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf1dee000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0xf8000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff ffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:64 nr_no de_ids:1 [ 0.000000] PERCPU: Embeddpages/cpu @ffff8803fa200000 s97688 r8192 d29288 u26 2144 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pag es: 4119142 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/ROOT/pve-1@/boot/vmlinuz-4.2.2-1 -pve root=ZFS=/ROOT/pve-1 ro boot=zfs root=ZFS=rpool/ROOT/pve-1 boot=zfs console =tty0 console=ttyS0,115200 [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 258048 bytes [ 0.000000] log_buf_len min size: 262144 bytes [ 0.000000] log_buf_len: 524288 bytes [ 0.000000] early log buf free: 250424(95%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 16361064K/16741868K available (8019K kernel code, 1326K r wdata, 3808K rodata, 1472K init, 1300K bss, 380804K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=64. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=64 [ 0.000000] NR_IRQS:16640 nr_irqs:936 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-63. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 133484882848 ns [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3292.531 MHz processor [ 0.000028] Calibrating delay loop (skipped), value calculated using timer fr equency.. 6585.06 BogoMIPS (lpj=13170124) [ 0.003397] pid_max: default: 65536 minimum: 512 [ 0.004839] ACPI: Core revision 20150619 [ 0.007449] ACPI: All ACPI Tables successfully acquired [ 0.009278] Security Framework initialized [ 0.010645] AppArmor: AppArmor initialized [ 0.011949] Yama: becoming mindful. [ 0.013879] Dentry cache hash table entries: 2097152 (order: 12, 16777216 byt es) [ 0.019328] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes ) [ 0.022883] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.025055] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 byte s) [ 0.027642] Initializing cgroup subsys blkio [ 0.029114] Initializing cgroup subsys memory [ 0.030497] Initializing cgroup subsys devices [ 0.031913] Initializing cgroup subsys freezer [ 0.033333] Initializing cgroup subsys net_cls [ 0.034768] Initializing cgroup subsys perf_event [ 0.036356] Initializing cgroup subsys net_prio [ 0.037773] Initializing cgroup subsys hugetlb [ 0.039215] CPU: Physical Processor ID: 0 [ 0.040490] CPU: Processor Core ID: 0 [ 0.041681] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.043557] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.046099] mce: CPU supports 9 MCE banks [ 0.047418] CPU0: Thermal monitoring enabled (TM1) [ 0.048921] process: using mwait in idle threads [ 0.050367] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.052773] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.054850] Freeing SMP alternatives memory: 28K (ffffffff81ebd000 - ffffffff 81ec4000) [ 0.058971] ftrace: allocating 31322 entries in 123 pages [ 0.074993] DMAR: Host address width 39 [ 0.076617] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.078295] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ec ap f010da [ 0.080729] DMAR: RMRR base: 0x000000f1ffd000 end: 0x000000f1ffffff [ 0.082673] DMAR: RMRR base: 0x000000f1ff6000 end: 0x000000f1ffcfff [ 0.084610] DMAR: RMRR base: 0x000000f1f93000 end: 0x000000f1f94fff [ 0.086681] DMAR: RMRR base: 0x000000f1f8f000 end: 0x000000f1f92fff [ 0.088631] DMAR: RMRR base: 0x000000f1f7f000 end: 0x000000f1f8efff [ 0.090575] DMAR: RMRR base: 0x000000f1f7e000 end: 0x000000f1f7efff [ 0.092608] DMAR: RMRR base: 0x000000000f4000 end: 0x000000000f4fff [ 0.094545] DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff [ 0.096562] DMAR: RMRR base: 0x000000f1dee000 end: 0x000000f1deefff [ 0.098487] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0 [ 0.100481] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.102211] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.104335] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS set ting. [ 0.107017] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.108863] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.110668] Switched APIC routing to physical flat. [ 0.112643] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.154559] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (fam: 06 , model: 3a, stepping: 09) [ 0.157963] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, fu ll-width counters, Broken BIOS detected, complain to your hardware vendor. [ 0.162548] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330) [ 0.164914] Intel PMU driver. [ 0.165913] ... version: 3 [ 0.167222] ... bit width: 48 [ 0.168533] ... generic registers: 4 [ 0.169799] ... value mask: 0000ffffffffffff [ 0.171465] ... max period: 0000ffffffffffff [ 0.173224] ... fixed-purpose events: 3 [ 0.174496] ... event mask: 000000070000000f [ 0.176960] x86: Booting SMP configuration: [ 0.178304] .... node #0, CPUs: #1 [ 0.183530] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PM U counter. [ 0.186932] #2 #3 #4 #5 #6 #7 [ 0.209733] x86: Booted up 1 node, 8 CPUs [ 0.211216] smpboot: Total of 8 processors activated (52680.49 BogoMIPS) [ 0.219625] devtmpfs: initialized [ 0.223359] evm: security.selinux [ 0.224699] evm: security.SMACK64 [ 0.225804] evm: security.SMACK64EXEC [ 0.226997] evm: security.SMACK64TRANSMUTE [ 0.228332] evm: security.SMACK64MMAP [ 0.229508] evm: security.ima [ 0.230485] evm: security.capability [ 0.231739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns [ 0.234821] pinctrl core: initialized pinctrl subsystem [ 0.236655] RTC time: 12:05:31, date: 12/14/15 [ 0.238144] NET: Registered protocol family 16 [ 0.247397] cpuidle: using governor ladder [ 0.251398] cpuidle: using governor menu [ 0.253062] ACPI FADT declares the system doesn't support PCIe ASPM, so disab le it [ 0.255461] ACPI: bus type PCI registered [ 0.256740] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.259109] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7 ffffff](base 0xf4000000) [ 0.261929] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.264007] PCI: Using configuration type 1 for base access [ 0.266046] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, H T is on [ 0.275746] ACPI: Added _OSI(Module Device) [ 0.277345] ACPI: Added _OSI(Processor Device) [ 0.278757] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.280248] ACPI: Added _OSI(Processor Aggregator Device) [ 0.283214] ACPI: Interpreter enabled [ 0.284983] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State S1 [ 0.288217] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State S2 [ 0.291215] ACPI Exception: AE_NOT_FOUile evaluating Sleep State [S3](201 50619/hwxface-580) [ 0.494255] ACPI: (supports S0 S4 S5) [ 0.495464] ACPI: Using IOAPIC for interrupt routing [ 0.497036] HEST: Table parsing has been initialized. [ 0.498634] PCI: Using host bridge windows from ACPI; if necessary, use "pci= nocrs" and report a bug [ 0.502745] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-14]) [ 0.504662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S egments MSI] [ 0.507355] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability] [ 0.510197] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.513001] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapa bility] [ 0.515400] acpi PNP0A08:00: _OSC: platform willing to grant [] [ 0.517235] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.519219] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0 xfed44fff window]; [mem 0xfed00000-0xfed44fff window] ignored [ 0.523251] PCI host bridge to bus 0000:00 [ 0.524580] pci_bus 0000:00: root bus resource [bus 00-14] [ 0.526500] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff win dow] [ 0.528807] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.531454] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.533549] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.535679] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.537783] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff win dow] [ 0.540084] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window] [ 0.542287] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window] [ 0.544388] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win dow] [ 0.548161] pci 0000:07:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0003ffff 64 bit](contains BAR0 for 16 VFs) [ 0.551624] pci 0000:07:00.0: VF(n) BAR2 space: [mem 0x00000000-0x003fffff 64 bit](contains BAR2 for 16 VFs) [ 0.559636] pci 0000:00:01.0: PCI bridge to [bus 07] [ 0.561277] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.562883] pci 0000:00:1c.0: PCI bridge to [bus 0d] [ 0.572479] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.580480] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 0.588484] pci 0000:00:1c.7: PCI bridge to [bus 01] [ 0.590276] pci 0000:00:1e.0: PCI bridge to [bus 14](subtractive decode) [ 0.592583] ACPI: PCI Interrupt Link [LNKA](IRQs 5 7 10 11) [ 0.594944] ACPI: PCI Interrupt Link [LNKB](IRQs 5 7 10 11) [ 0.597830] ACPI: PCI Interrupt Link [LNKC](IRQs 5 7 10 11) [ 0.600206] ACPI: PCI Interrupt Link [LNKD](IRQs 5 7 10 11) [ 0.602804] ACPI: PCI Interrupt Link [LNKE](IRQs 5 7 10 11) [ 0.605225] ACPI: PCI Interrupt Link [LNKF](IRQs 5 7 10 11) 3 [ 0.608533] ACPI: PCI Interrupt Link [LNKG](IRQs 5 7 10 11) 0, disabled. [ 0.611362] ACPI: PCI Interrupt Link [LNKH](IRQs 5 7 10 11) 0, disabled. [ 0.614663] vgaarb: setting as boot device: PCI:0000:01:00.1 [ 0.616536] vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem ,locks=none [ 0.619016] vgaarb: loaded [ 0.619909] vgaarb: bridge control possible 0000:01:00.1 [ 0.621822] SCSI subsystem initialized [ 0.623463] ACPI: bus type USB registered [ 0.624783] usbcore: registered new interface driver usbfs [ 0.626741] usbcore: registered new interface driver hub [ 0.628456] usbcore: registered new device driver usb [ 0.630146] PCI: Using ACPI for IRQ routing [ 0.633128] NetLabel: Initializing [ 0.634612] NetLabel: domain hash size = 128 [ 0.636042] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.637757] NetLabel: unlabeled traffic allowed by default [ 0.639562] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.642600] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.646452] clocksource: Switched to clocksource hpet [ 0.652403] AppArmor: AppArmor Filesystem Enabled [ 0.654363] pnp: PnP ACPI init [ 0.655539] system 00:00: [io 0x0408-0x040f] has been reserved [ 0.657413] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.659576] system 00:00: [io 0x0310-0x0313] has been reserved [ 0.661630] system 00:00: [io 0x0316-0x0317] has been reserved [ 0.663490] system 00:00: [io 0x0700-0x071f] has been reserved [ 0.665344] system 00:00: [io 0x0880-0x08ff] has been reserved [ 0.667193] system 00:00: [io 0x0900-0x097f] has been reserved [ 0.669000] system 00:00: [io 0x0cd4-0x0cd7] has been reserved [ 0.670951] system 00:00: [io 0x0cd0-0x0cd3] has been reserved [ 0.672791] system 00:00: [io 0x0f50-0x0f58] has been reserved [ 0.674612] system 00:00: [io 0x0ca0-0x0ca1] has been reserved [ 0.676537] system 00:00: [io 0x0ca4-0x0ca5] has been reserved [ 0.678718] system 00:00: [io 0x03f8-0x03ff] has been reserved [ 0.680640] system 00:00: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.680] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.784752] system 00:00: [mem 0xfed90000-0xfed91fff] could not be reserved [ 0.787142] pnp: PnP ACPI: found 5 devices [ 0.794102] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id le_ns: 2085701024 ns [ 0.796988] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8000000-0xf80fffff] [ 0.799260] pci 0000:07:00.0: BAR 6: assigned [mem 0xfbf00000-0xfbf7ffff pref ] [ 0.801475] pci 0000:07:00.0: BAR 9: no space for [mem size 0x00400000 64bit] [ 0.803642] pci 0000:07:00.0: BAR 9: failed to assign [mem size 0x00400000 64 bit] [ 0.805963] pci 0000:07:00.0: BAR 7: no space for [mem size 0x00040000 64bit] [ 0.808181] pci 0000:07:00.0: BAR 7: failed to assign [mem size 0x00040000 64 bit] [ 0.810467] pci 0000:00:01.0: PCI bridge to [bus 07] [ 0.812020] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.817928] pci 0000:00:01.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.820067] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.821625] pci 0000:00:1c.0: PCI bge to [bus 0d] [ 0.923267] pci 0000:03:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref ] [ 0.925537] pci 0000:03:00.1: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref ] [ 0.927884] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.929475] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff] [ 0.931560] pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bi t pref] [ 0.933921] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 0.935531] pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.937624] pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref ] [ 0.939822] pci 0000:00:1c.7: PCI bridge to [bus 01] [ 0.941392] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff] [ 0.943383] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff] [ 0.945495] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bi t pref] [ 0.947870] pci 0000:00:1e.0: PCI bridge to [bus 14] [ 0.949467] pci 0000:00:01.0: PCI bridge to [bus 07] [ 0.951265] pci 0000:00:01.0: BAR 14: assigned [mem 0xf8100000-0xf86fffff] [ 0.953382] pci 0000:07:00.0: BAR 6: assigned [mem 0xf8100000-0xf817ffff pref ] [ 0.955638] pci 0000:07:00.0: BAR 3: assigned [mem 0xf8180000-0xf81bffff 64bi t] [ 0.957991] pci 0000:07:00.0: BAR 9: assigned [mem 0xf81c0000-0xf85bffff 64bi t] [ 0.960267] pci 0000:07:00.0: BAR 1: assigned [mem 0xf85c0000-0xf85c3fff 64bi t] [ 0.963245] pci 0000:07:00.0: BAR 7: assigned [mem 0xf85c4000-0xf8603fff 64bi t] [ 0.965547] pci 0000:00:01.0: PCI bridge to [bus 07] [ 0.967140] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.969007] pci 0000:00:01.0: bridge window [mem 0xf8100000-0xf86fffff] [ 0.971082] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.972605] pci 0000:00:1c.0: PCI bridge to [bus 0d] [ 0.974295] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.975872] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff] [ 0.977968] pci 0000:00:1c.4: bridge window [mem 0xfab0000xfabfffff 64bit p ref] [ 1.080428] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 1.082002] pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.084105] pci 0000:00:1c.7: PCI bridge to [bus 01] [ 1.085657] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff] [ 1.087694] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff] [ 1.089759] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bi t pref] [ 1.092117] pci 0000:00:1e.0: PCI bridge to [bus 14] [ 1.093721] NET: Registered protocol family 2 [ 1.095281] TCP established hash table entries: 131072 (order: 8, 1048576 byt es) [ 1.097719] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.100154] TCP: Hash tables configured (established 131072 bind 65536) [ 1.102405] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.104660] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.106877] NET: Registered protocol family 1 [ 1.138785] Trying to unpack rootfs image as initramfs... [ 1.400150] Freeing initrd memory: 24736K (ffff880034fa0000 - ffff8800367c800 0) [ 1.402591] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.404675] software IO TLB mem 0xedde4000-0xf1de4000 mapped at [fff f8800edde4000-ffff8800f1de3fff] [ 1.407842] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163 840 ms ovfl timer [ 1.410574] hw unit of domain pp0-core 2^-16 Joules [ 1.412097] hw unit of domain package 2^-16 Joules [ 1.413607] hw unit of domain pp1-gpu 2^-16 Joules [ 1.415154] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c [ 1.416954] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c [ 1.418767] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1c [ 1.420599] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1c [ 1.422415] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1c [ 1.424226] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1c [ 1.426038] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1c [ 1.427828] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1c [ 1.429691] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet. co.uk>, Peter Oruba [ 1.432478] Scanning for low memory corruption every 60 seconds [ 1.434983] futex hash table entries: 16384 (order: 8, 1048576 bytes) [ 1.437469] Initialise system trusted keyring [ 1.438917] audit: initializing netlink subsys (disabled) [ 1.440635] audit: type=2000 audit(1450094731.424:1): initialized [ 1.443094] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.445976] zpool: loaded [ 1.446953] zbud: loaded [ 1.448021] VFS: Disk quotas dquot_6.6.0 [ 1.449342] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.452410] fuse init (API version 7.23) [ 1.453798] Key type big_key registered [ 1.455556] Key type asymmetric registered [ 1.457357] Asymmetric key parser 'x509' registered [ 1.458936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 49) [ 1.461293] io scheduler noop registered [ 1.462867] io scheduler deadline registered (default) [ 1.464509] io scheduler cfq registered [ 1.466219] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.467982] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.470249] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut0 [ 1.472871] ACPI: Power Button [PWRF] [ 14448] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.576825] ACPI: Thermal Zone [THM0](8 C) [ 1.578220] ERST: Error Record Serialization Table (ERST) support is initiali zed. [ 1.580541] pstore: Registered erst as persistent store backend [ 1.582411] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _O SC. [ 1.584812] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.607281] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.611403] Linux agpgart interface v0.103 [ 1.614879] brd: module loaded [ 1.616842] loop: module loaded [ 1.618279] libphy: Fixed MDIO Bus: probed [ 1.620091] tun: Universal TUN/TAP device driver, 1.6 [ 1.621684] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 1.623671] PPP generic driver version 2.4.2 [ 1.625163] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.627187] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus numbe r 1 [ 1.634813] xhci_hcd 0000:04:00.0: hcc params 0x014051cf hci version 0x100 qu irks 0x00000010 [ 1.637890] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.639991] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.642254] usb usb1: Product: xHCI Host Controller [ 1.644344] usb usb1: Manufacturer: Linux 4.2.2-1-pve xhci-hcd [ 1.646295] usb usb1: SerialNumber: 0000:04:00.0 [ 1.647870] hub 1-0:1.0: USB hub found [ 1.649462] hub 1-0:1.0: 2 ports detected [ 1.650821] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.652486] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus numbe r 2 [ 1.654802] usb usb2: We don't know the algorithms for LPM for this host, dis abling LPM. [ 1.657432] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.659897] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.662273] usb usb2: Product: xHCI Host Controller [ 1.663809] usb usb2: Manufacturer: Linux 4.2.2-1-pve xhci-hcd [ 1.665656] usb usb2: SerialNumber: 0000:04:00.0 [ 1.667233] hub 2-0:1.0: USB hub found [ 1.668456] hub 2-0:1.0: 2 ports detected [ 1.669777] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.671780] ehci-pci: EHCI PCI platform driver [ 1.673624] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.675327] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus numbe r 3 [ 1.677611] ehci-pci 0000:00:1a.0: debug port 2 [ 1.682946] ehci-pci 0000:00:1a.0: irq 21, io mem 0xfacf0000 [ 1.694438] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.696511] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.698618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.701274] usb usb3: Product: EHCI Host Controller [ 1.702877] usb usb3: Manufacturer: Linux 4.2.2-1-pve ehci_hcd [ 1.704839] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.706528] hub 3-0:1.0: USB hub found [ 1.707750] hub 3-0:1.0: 2 ports detected [ 1.709120] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.710743] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus numbe r 4 [ 1.713022] ehci-pci 0000:00:1d.0: debug port 2 [ 1.718376] ehci-pci 0000:00:1d.0: irq 20, io mem 0xface0000 [ 1.730435] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.732676] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.734783] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.737138] usb usb4: Product: EHCI Host Controller [ 1.738660] usb usb4: Manufacturer: Linux 4.2.2-1-pve ehci_hcd [ 1.740476] usb usb4: SerialNumber: 0000:00:1d.0 [ 1.742064] hub 4-0:1.0: USB hub found [ 1.743341] hub 4-0:1.0: 2 ports detected [ 1.744670] ehci-platform: EHCI generic platform driver [ 1.746429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.748356] ohci-pci: OHCI PCI platform driver [ 1.749784] ohci-platform: OHCI generic platform driver [ 1.755385] uhci_hcd: USB Universal Host Controller Interface driver [ 1.757672] uhci_hcd 0000:01:00.4: UHCI Host Controller [ 1.759338] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus numbe r 5 [ 1.761634] uhci_hcd 0000:01:00.4: detected 8 ports [ 1.763185] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports [ 1.765417] uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00 [ 1.767397] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.769775] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.772439] usb usb5: Product: UHCI Host Controller [ 1.774120] usb usb5: Manufacturer: Linux 4.2.2-1-pve uhci_hcd [ 1.776071] usb usb5: SerialNumber: 0000:01:00.4 [ 1.777784] hub 5-0:1.0: USB hub found [ 1.779143] hub 5-0:1.0: 2 ports detected [ 1.780560] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x 64 irq 1,12 [ 1.785048] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.787030] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.788896] mousedev: PS/2 mouse device common for all mice [ 1.791085] rtc_cmos 00:02: RTC can wake from S4 [ 1.792826] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.794884] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.797370] i2c /dev entries driver [ 1.799039] device-mapper: uevent: version 1.0.3 [ 1.800937] device-mapper: ioctl: 4.33.octl (2015-8-18) initialised: dm-devel @redhat.com [ 1.903855] ledtrig-cpu: registered to indicate activity on CPUs [ 1.906244] PCCT header not found. [ 1.907705] NET: Registered protocol family 10 [ 1.909444] NET: Registered protocol family 17 [ 1.911105] bridge: automatic filtering via arp/ip/ip6tables has been depreca ted. Update your scripts to load br_netfilter if you need this. [ 1.916418] Bridge firewalling registered [ 1.917868] Key type dns_resolver registered [ 1.919847] Loading compiled-in X.509 certificates [ 1.921691] registered taskstats version 1 [ 1.923070] zswap: loading zswap [ 1.924197] zswap: using zbud pool [ 1.925409] zswap: using lzo compressor [ 1.927691] Key type trusted registered [ 1.930524] Key type encrypted registered [ 1.931970] AppArmor: AppArmor sha1 policy hashing enabled [ 1.933834] ima: No TPM chip found, activating TPM-bypass! [ 1.935696] evm: HMAC attrs: 0x1 [ 1.937167] Magic number: 11:872:76 [ 1.938603] rtc_cmos 00:02: setting system clock to 2015-12-14 12:05:33 UTC ( 1450094733) [ 1.944164] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.946511] EDD information not available. [ 1.948428] Freeing unused kernel memory: 1472K (ffffffff81d4d000 - ffffffff8 1ebd000) [ 1.989601] Write protecting the kernel read-only data: 12288k [ 2.021336] Freeing unused kernel memory: 160K (ffff8800017d8000 - ffff880001 800000) [ 2.060551] Freeing unused kernel memory: 288K (ffff880001bb8000 - ffff880001 c00000) Loading, please wait... [ 2.106714] systemd-udevd[148]: starting version 215 [ 2.114429] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 2.130432] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 2.130440] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 2.143205] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.246796] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.246797] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.246945] hub 4-1:1.0: USB hub found [ 2.247044] hub 4-1:1.0: 6 ports detected [ 2.262798] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.262799] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.262946] hub 3-1:1.0: USB hub found [ 2.263046] hub 3-1:1.0: 6 ports detected [ 2.276188] usb 5-1: New USB device found, idVendor=03f0, idProduct=7029 [ 2.276189] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.276190] usb 5-1: Product: Virtual Keyboard [ 2.276190] usb 5-1: Manufacturer: BMC [ 2.406416] tsc: Refined TSC clocksource calibration: 3292.520 MHz [ 2.406418] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1ea c7a, max_idle_ns: 440795210882 ns [ 2.518423] usb 4-1.3: new high-speed USB device number 3 using ehci-pci [ 2.614786] usb 4-1.3: New USB device found, idVendor=0424, idProduct=2660 [ 2.614787] usb 4-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber =0 [ 2.614936] hub 4-1.3:1.0: USB hub found [ 2.615033] hub 4-1.3:1.0: 2 ports detected [ 2.844378] random: systemd-udevd urandom read with 4 bits of entropy availab le [ 2.887341] pps_core: LinuxPPS API ver. 1 registered [ 2.914047] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti giometti@linux.it [ 2.960050] mpt2sas version 20.100.00.00 loaded [ 2.983366] PTP clock support registered [ 2.983664] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (163 87748 kB) [ 3.045383] hidraw: raw HID events driver (C) Jiri Kosina [ 3.074189] tg3.c:v3.137 (May 11, 2014) [ 3.074287] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.074366] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f im pl SATA mode [ 3.074368] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems apst [ 3.078069] usbcore: registered new interface driver usbhid [ 3.078069] usbhid: USB HID core driver [ 3.111018] scsi host1: ahci [ 3.111162] scsi host2: ahci [ 3.111282] scsi host3: ahci [ 3.111397] scsi host4: ahci [ 3.111511] scsi host5: ahci [ 3.111628] scsi host6: ahci [ 3.111657] ata1: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0100 irq 35 [ 3.111658] ata2: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0180 irq 35 [ 3.111661] ata3: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0200 irq 35 [ 3.111662] ata4: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0280 irq 35 [ 3.111665] ata5: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0300 irq 35 [ 3.111667] ata6: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0380 irq 35 [ 3.118434] mpt2sas0: MSI-X vectors supported: 1, no of cores: 8, max_msix_ve ctors: 8 [ 3.118474] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 36 [ 3.118475] mpt2sas0: iomem(0x00000000f85c0000), mapped(0xffffc90001c60000), size(16384) [ 3.118476] mpt2sas0: ioport(0x0000000000004000), size(256) [ 3.286411] mpt2sas0: sending message unit reset !! [ 3.294411] mpt2sas0: message unit reset: SUCCESS [ 3.328902] usbcore: registered new interface driver usbkbd [ 3.328925] usbcore: registered new interface driver usbmouse [ 3.426250] mpt2sas0: Allocated physical memory: size(8056 kB) [ 3.426252] mpt2sas0: Current Controller Queue Depth(3579), Max Controller Qu eue Depth(3712) [ 3.426252] mpt2sas0: Scatter Gather Elements per IO(128) [ 3.922128] clocksource: Switched to clocksource tsc [ 3.922273] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/ 0000:01:00.4/usb5/5-1/5-1:1.0/0003:03F0:7029.0001/input/input3 [ 3.974509] hid-generic 0003:03F0:7029.0001: input,hidraw0: USB HID v1.01 Key board [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0 [ 3.974584] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/ 0000:01:00.4/usb5/5-1/5-1:1.1/0003:03F0:7029.0002/input/input4 [ 3.974723] hid-generic 0003:03F0:7029.0002: input,hidraw1: USB HID v1.01 Mou se [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1 [ 4.078406] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.078965] ata1.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133 [ 4.078966] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.079574] ata1.00: configured for UDMA/133 [ 4.079719] scsi 1:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ : 0 ANSI: 5 [ 4.079872] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2. 72 TiB) [ 4.079874] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 4.079898] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.079899] sd 1:0:0:0: [sda] Write Protect is off [ 4.079908] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 4.118856] mpt2sas0: LSISAS2008: FWVersion(11.00.00.00), ChipRevision(0x03), BiosVersion(07.21.00.00) [ 4.118858] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Sna pshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) [ 4.118904] scsi host0: Fusion MPT SAS Host [ 4.119030] mpt2sas0: sending port enable !! [ 4.120949] mpt2sas0: host_add: handle(0x0001), sas_addr(0x500605b0056f22d0), phys(8) [ 4.134368] mpt2sas0: port enable: SUCCESS [ 4.159498] sda: sda1 sda2 sda9 [ 4.159688] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.570376] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.570937] ata2.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133 [ 4.570937] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.571540] ata2.00: configured for UDMA/133 [ 4.571677] scsi 2:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ : 0 ANSI: 5 [ 4.571885] sd 2:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2. 72 TiB) [ 4.571886] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 4.571904] sd 2:0:0:0: [sdb] Write Protect is off [ 4.571925] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 4.571938] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 4.653983] sdb: sdb1 sdb2 sdb9 [ 4.654170] sd 2:0:0:0: [sdb] Attached SCSI disk [ 5.062365] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.062929] ata3.00: ATA-9: WDC WD30EZRZ-00WN9B0, 80.00A80, max UDMA/133 [ 5.062929] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.063541] ata3.00: configured for UDMA/133 [ 5.063678] scsi 3:0:0:0: Direct-Access ATA WDC WD30EZRZ-00W 0A80 PQ : 0 ANSI: 5 [ 5.063887] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2. 72 TiB) [ 5.063888] sd 3:0:0:0: [sdc] 4096-byte physical blocks [ 5.063905] sd 3:0:0:0: [sdc] Write Protect is off [ 5.063928] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 5.063938] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 5.137606] sdc: sdc1 sdc2 sdc9 [ 5.137793] sd 3:0:0:0: [sdc] Attached SCSI disk [ 5.533819] tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000](PCI Expr ess) MAC address a0:1d:48:c7:46:4c [ 5.554341] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.554915] ata4.00: ATA-9: WDC WD30EZRZ-00WN9B0, 80.00A80, max UDMA/133 [ 5.554916] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.555523] ata4.00: configured for UDMA/133 [ 5.555657] scsi 4:0:0:0: Direct-Access ATA WDC WD30EZRZ-00W 0A80 PQ : 0 ANSI: 5 [ 5.555850] sd 4:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2. 72 TiB) [ 5.555851] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 5.555887] sd 4:0:0:0: [sdd] Write Protect is off [ 5.555895] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 5.555911] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 5.626316] sdd: sdd1 sdd2 sdd9 [ 5.626513] sd 4:0:0:0: [sdd] Attached SCSI disk [ 5.954872] tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T E thernet) (WireSpeed[1], EEE[1]) [ 6.005731] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] T SOcap[1] [ 6.045619] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 6.046339] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.046643] ata5.00: ATA-9: MTFDDAK512MAM-1K1, 0909, max UDMA/100 [ 6.046644] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), A A [ 6.047013] ata5.00: configured for UDMA/100 [ 6.047161] scsi 5:0:0:0: Direct-Access ATA MTFDDAK512MAM-1K 0909 PQ : 0 ANSI: 5 [ 6.047397] sd 5:0:0:0: [sde] 1000215216 512-byte logical blocks: (512 GB/476 GiB) [ 6.047403] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 6.047436] sd 5:0:0:0: [sde] Write Protect is off [ 6.047447] sd 5:0:0:0: [sde] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 6.048870] sde: sde1 sde2 sde3 [ 6.049043] sd 5:0:0:0: [sde] Attached SCSI disk [ 6.366319] ata6: SATA link down (SStatus 0 SControl 300) [ 6.453557] tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000](PCI Expr ess) MAC address a0:1d:48:c7:46:4d [ 6.502647] tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T E thernet) (WireSpeed[1], EEE[1]) [ 6.535545] random: nonblocking pool is initialized [ 6.574337] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] T SOcap[1] [ 6.612094] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 7.281532] usb 2-1: New USB device found, idVendor=174c, idProduct=5106 [ 7.313853] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 7.350237] usb 2-1: Product: AS2105 [ 7.369535] usb 2-1: Manufacturer: ASMedia [ 7.392132] usb 2-1: SerialNumber: 13010923D734 [ 7.422045] usb-storage 2-1:1.0: USB Mass Storage device detected [ 7.453812] scsi host7: usb-storage 2-1:1.0 [ 7.476068] usbcore: registered new interface driver usb-storage [ 7.507827] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... done. Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 7.546199] zavl: module license 'CDDL' taints kernel. [ 7.573343] Disabling lock debugging due to kernel taint [ 7.601520] SPL: Loaded module v0.6.5-348_gd7526b2 [ 7.635226] ZFS: Loaded module v0.6.5.2-55_g61d75b3, ZFS pool version 5000, Z FS filesystem version 5 Begin: Importing pool 'rpool' using defaults ... [ 7.816113] SPL: using hosti d 0xa8c02302 [ 8.968313] scsi 7:0:0:0: Direct-Access MTFDDAK5 12MAM-1K1 0909 PQ : 0 ANSI: 5 [ 9.007616] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 9.007896] sd 7:0:0:0: [sdf] 1000215216 512-byte logical blocks: (512 GB/476 GiB) [ 9.009049] sd 7:0:0:0: [sdf] Write Protect is off [ 9.010070] sd 7:0:0:0: [sdf] No Caching mode page found [ 9.010071] sd 7:0:0:0: [sdf] Assuming drive cache: write through Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 12.473894] sdf: sdf1 sdf2 sdf3 [ 12.477981] sd 7:0:0:0: [sdf] Attached SCSI disk [ 12.513570] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 12.518121] systemd[1]: Detected architecture 'x86-64'.

Welcome to Debian GNU/Linux 8 (jessie)!

[ 12.759006] systemd[1]: Inserted module 'autofs4' [ 12.771936] systemd[1]: Set hostname to . [ 13.222483] systemd-sysv-generator[679]: Ignoring creation of an alias umount iscsi.service for itself [ 13.892003] systemd[1]: Cannot add dependency job for unit display-manager.se rvice, ignoring: Unit display-manager.service failed to load: No such file or di rectory. [ 13.897372] systemd[1]: Expecting device dev-ttyS0.device... Expecting device dev-ttyS0.device... [ 13.906195] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 13.908944] systemd[1]: Started Forward Password Requests to Wall Directory W atch. [ 13.911464] systemd[1]: Starting Dispatch Password Requests to Console Direct ory Watch. [ 13.914159] systemd[1]: Started Dispatch Password Requests to Console Directo ry Watch. [ 13.916929] systemd[1]: Starting Paths. [ OK ] Reached target Paths. [ 13.926192] systemd[1]: Reached target Paths. [ 13.928063] systemd[1]: Starting Encrypted Volumes. [ OK ] Reached target Encrypted Volumes. [ 13.938193] systemd[1]: Reached target Encrypted Volumes. [ 13.940506] systemd[1]: Starting Arbitrary Executable File Formats File Syste m Automount Point. [ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point. [ 13.950181] systemd[1]: Set up automount Arbitrary Executable File Formats Fi le System Automount Point. [ 13.953542] systemd[1]: Expecting device dev-zvol-rpool-swap.device... Expecting device dev-zvol-rpool-swap.device... [ 13.962149] systemd[1]: Starting Root Slice. [ OK ] Created slice Root Slice. [ 13.970191] systemd[1]: Created slice Root Slice. [ 13.971745] systemd[1]: Starting User and Session Slice. [ OK ] Created slice User and Session Slice. [ 13.978190] systemd[1]: Created slice User and Session Slice. [ 13.980128] systemd[1]: Starting Delayed Shutdown Socket. [ OK ] Listening on Delayed Shutdown Socket. [ 13.990194] systemd[1]: Listening on Delayed Shutdown Socket. [ 13.992342] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 14.002185] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 14.004471] systemd[1]: Starting Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 14.014162] systemd[1]: Listening on Journal Socket (/dev/log). [ 14.016450] systemd[1]: Starting LVM2 metadata daemon socket. [ OK ] Listening on LVM2 metadata daemon socket. [ 14.026138] systemd[1]: Listening on LVM2 metadata daemon socket. [ 14.028229] systemd[1]: Starting Device-mapper event daemon FIFOs. [ OK ] Listening on Device-mapper event daemon FIFOs. [ 14.038172] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 14.040793] systemd[1]: Starting LVM2 poll daemon socket. [ OK ] Listening on LVM2 poll daemon socket. [ 14.050192] systemd[1]: Listening on LVM2 poll daemon socket. [ 14.052114] systemd[1]: Starting udev Control Socket. [ OK ] Listening on udev Control Socket. [ 14.062186] systemd[1]: Listening on udev Control Socket. [ 14.064121] systemd[1]: Starting udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 14.074159] systemd[1]: Listening on udev Kernel Socket. [ 14.076060] systemd[1]: Starting Journal Socket. [ OK ] Listening on Journal Socket. [ 14.082158] systemd[1]: Listening on Journal Socket. [ 14.083885] systemd[1]: Starting System Slice. [ OK ] Created slice System Slice. [ 14.094160] systemd[1]: Created slice System Slice. [ 14.096170] systemd[1]: Starting system-getty.slice. [ OK ] Created slice system-getty.slice. [ 14.106160] systemd[1]: Created slice system-getty.slice. [ 14.108531] systemd[1]: Starting system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 14.118160] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 14.120366] systemd[1]: Starting Increase datagram queue length... Starting Increase datagram queue length... [ 14.130467] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. u sing dmeventd or progress polling... Starting Monitoring of LVM2 mirrors, snapshots etc. ...ress polling... [ 14.143047] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 14.150457] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 14.158494] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required static device nodes...rrent kernel... [ 14.170874] systemd[1]: Started Set Up Additional Binary Formats. [ 14.172948] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 14.182441] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 14.190433] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 14.198413] systemd[1]: Starting Slices. [ OK ] Reached target Slices. [ 14.206176] systemd[1]: Reached target Slices. [ OK ] Started Create list of required static device nodes ...current kernel. [ 14.246235] systemd[1]: Started Create list of required static device nodes f or the current kernel. [ 14.249648] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev... [ OK ] Started udev Coldplug all Devices. [ 14.318143] systemd[1]: Started udev Coldplug all Devices. [ 14.320373] systemd[1]: Starting udev Wait for Complete Device Initialization ... Starting udev Wait for Complete Device Initialization... [ OK ] Started Increase datagram queue length. [ 14.366149] systemd[1]: Started Increase datagram queue length. [ OK ] Mounted Huge Pages File System. [ 14.374132] systemd[1]: Mounted Huge Pages File System. [ OK ] Mounted Debug File System. [ 14.382131] systemd[1]: Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ 14.390129] systemd[1]: Mounted POSIX Message Queue File System. [ 14.395164] systemd[1]: Starting Syslog Socket. [ OK ] Listening on Syslog Socket. [ 14.402141] systemd[1]: Listening on Syslog Socket. [ 14.403743] systemd[1]: Starting Journal Service... Starting Journal Service... [ OK ] Started Journal Service. [ 14.418138] systemd[1]: Started Journal Service. [ OK ] Started Load Kernel Modules. Starting Apply Kernel Variables... Mounting FUSE Control File System... [ OK ] Mounted FUSE Control File System. [ OK ] Started Apply Kernel Variables. Starting LVM2 metadata daemon... [ OK ] Started LVM2 metadata daemon. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ 14.629119] systemd-udevd[713]: starting version 215 [ OK ] Started udev Kernel Device Manager. Starting LSB: Set preliminary keymap... Starting LSB: Tune IDE hard disks... [ OK ] Started LSB: Tune IDE hard disks. [ OK ] Found device /dev/ttyS0. [ 14.901292] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 14.927803] power_meter ACPI000D:00: Found ACPI power meter. [ 14.929782] power_meter ACPI000D:00: Ignoring unsafe software power cap! [ 14.947335] EDAC MC: Ver: 3.0.0 [ 14.949310] EDAC MC0: Giving out device to module ie31200_edac controller IE3 1200: DEV 0000:00:00.0 (POLLED) [ 14.956330] ipmi message handler version 39.2 [ 14.968735] IPMI System Interface driver. [ 14.970250] ipmi_si: probing via ACPI [ 14.975533] ipmi_si 00:01: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 [ 14.978201] ipmi_si: Adding ACPI-specified kcs state machine [ 14.980266] ipmi_si: probing via SMBIOS [ 14.981578] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 14.983581] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate inte rface [ 14.986266] ipmi_si: probing via SPMI [ 14.987554] ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0 [ 14.989765] ipmi_si: Adding SPMI-specified kcs state machine duplicate interf ace [ 14.992283] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0 xca2, slave address 0x0, irq 0 [ 15.021951] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.024589] ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092 F conflicts with OpRegion 0x0000000000000920-0x000000000000092F (\SGPE) (2015061 9/utaddress-254) [ 15.030361] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.033866] lpc_ich: Resource conflict(s) found affecting gpio_ich [ OK ] Found device /dev/zvol/rpool/swap. [ 15.165159] hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initia lized, allow kernel dump: ON (default = 1/ON) [ 15.219841] hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.3, timer margin : 30 seconds (nowayout=0). [ 15.219870] iTCO_vendor_support: vendor-support=0 Activating swap /dev/zvol/rpool/swap... [ 15.226205] AVX version of gcm_enc/dec engaged. [ 15.252023] AES CTR mode by8 optimization enabled [ 15.260117] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 15.262098] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hard ware/BIOS [ 15.272759] gpio_ich: GPIO from 436 to 511 on gpio_ich [ OK ] Started Monitoring of LVM2 mirrors, snapshots etc. u...ogress polling. [ 15.317397] Error: Driver 'pcspkr' is already registered, aborting... [ 15.372569] ipmi_si 00:01: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13) [ 15.375418] ipmi_si 00:01: IPMI kcs interface initialized [ 15.386499] Adding 15728636k swap on /dev/zd0. Priority:-1 extents:1 across: 15728636k SSFS [ OK ] Activated swap /dev/zvol/rpool/swap. [ 15.398700] IPMI SSIF Interface driver [ OK ] Reached target Swap. [ 15.400914] intel_rapl: Found RAPL domain package [ 15.426479] intel_rapl: Found RAPL domain core [ OK ] Started LSB: Set preliminary keymap. Starting Remount Root and Kernel File Systems... [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Wait for Complete Device Initialization. Starting Import ZFS pools by cache file... Starting Copy rules generated while the root was ro... [ OK ] Started Copy rules generated while the root was ro. [ OK ] Started Import ZFS pools by cache file. Starting Mount ZFS filesystems... [FAILED] Failed to start Mount ZFS filesystems. See 'systemctl status zfs-mount.service' for details. [DEPEND] Dependency failed for ZFS startup target. [DEPEND] Dependency failed for ZFS file system shares. [ OK ] Reached target Local File Systems. Starting Proxmox VE Login Banner... Starting Commit Proxmox VE network changes... Starting Create Volatile Files and Directories... Starting Proxmox VE firewall logger... Starting LSB: Raise network interfaces.... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Commit Proxmox VE network changes. [ OK ] Started Network Time Synchronization. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Time Synchronized. [ 20.329094] Netfilter messages via NETLINK v0.30. [ 20.364546] device eth0 entered promiscuous mode [ OK ] Started Proxmox VE firewall logger. [ 20.494960] IPv6: ADDRCONF(NETDEV_UP): vmbr0: link is not ready [ OK ] Started Proxmox VE Login Banner. [ OK ] Started LSB: Raise network interfaces.. [ OK ] Reached target Network. Starting The Proxmox VE cluster filesystem... [ OK ] Reached target Network is Online. Starting LSB: RPC portmapper replacement... Starting LSB: Starts and stops the iSCSI initiator s...ault targets... [ 23.212847] Loading iSCSI transport class v2.0-870. [ OK ] Started LSB: RPC portmapper replacement. [ OK ] Reached target RPC Port Mapper. Starting LSB: NFS support files common to client and server... [ 23.244744] iscsi: registered transport (tcp) [ 23.358252] iscsi: registered transport (iser) [ OK ] Started LSB: Starts and stops the iSCSI initiator se...efault targets. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting Trigger Flushing of Journal to Persistent Storage... Starting LSB: AppArmor initialization... Starting LSB: Prepare console... [ 23.488985] RPC: Registered named UNIX socket transport module. [ 23.517279] RPC: Registered udp transport module. [ 23.518904] RPC: Registered tcp transport module. [ 23.520674] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 23.523812] systemd-journald[703]: Received request to flush runtime journal from PID 1 [ OK [ 23.526767] FS-Cache: Loaded ] Started Trigger Flushing of Journal to Persistent Storage. [ 23.574106] FS-Cache: Netfs 'nfs' registered for caching [ 23.672416] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ OK ] Started LSB: Prepare console. Starting LSB: Set console font and keymap... [ OK ] Started LSB: Set console font and keymap. [ 23.850695] tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 23.852917] tg3 0000:03:00.0 eth0: Flow control is on for TX and on for RX [ 23.855219] tg3 0000:03:00.0 eth0: EEE is disabled [ 23.855275] vmbr0: port 1(eth0) entered forwarding state [ 23.855290] vmbr0: port 1(eth0) entered forwarding state [ 23.855377] IPv6: ADDRCONF(NETDEV_CHANGE): vmbr0: link becomes ready [ OK ] Started LSB: NFS support files common to client and server. [ 24.133840] audit: type=1400 audit(1450094755.691:2): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="lxc-container-default" pid=1671 c omm="apparmor_parser" [ 24.139392] audit: type=1400 audit(1450094755.699:3): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="lxc-container-default-with-mounti ng" pid=1671 comm="apparmor_parser" [ 24.144944] audit: type=1400 audit(1450094755.703:4): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="lxc-container-default-with-nestin g" pid=1671 comm="apparmor_parser" [ 24.166895] audit: type=1400 audit(1450094755.727:5): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1671 comm ="apparmor_parser" [ OK ] Started LSB: AppArmor initialization. [ OK ] Reached target System Initialization. [ OK ] Listening on Proxmox VE watchdog multiplexer socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Timers. [ OK ] Reached target Basic System. Starting Cgroup management daemon... [ OK ] Started Cgroup management daemon. Starting Kernel Samepage Merging (KSM) Tuning Daemon... Starting ZFS Event Daemon (zed)... [ OK ] Started ZFS Event Daemon (zed). Starting Self Monitoring and Reporting Technology (SMART) Daemon... [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon. Starting FUSE filesystem for LXC... [ OK ] Started FUSE filesystem for LXC. Starting OpenBSD Secure Shell server... [ OK ] Started OpenBSD Secure Shell server. Starting LXC network bridge setup... Starting Deferred execution scheduler... [ OK ] Started Deferred execution scheduler. Starting Regular background program processing daemon... [ OK ] Started Regular background program processing daemon. Starting /etc/rc.local Compatibility... Starting Login Service... Starting LSB: Kernel NFS server support... Starting LSB: Start/stop sysstat's sadc... Starting LSB: Execute the kexec -e command to reboot system... Starting LSB: start the RRDtool data caching daemon... Starting LSB: start Samba daemons for the AD DC... Starting LSB: start Samba NetBIOS nameserver (nmbd)... Starting LSB: Postfix Mail Transport Agent... Starting Proxmox VE watchdog multiplexer... [ 24.580181] cgroup: new mount options do not match the existing superblock, w ill be ignored [ OK ] Started Proxmox VE watchdog multiplexer. Starting D-Bus System Message Bus... [ OK ] Started D-Bus System Message Bus. [ 24.903459] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.912118] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery d irectory [ 24.914864] NFSD: starting 90-second grace period (net ffffffff81cfc600) Starting System Logging Service... Starting Permit User Sessions... [ OK ] Started The Proxmox VE cluster filesystem. [ OK ] Started Kernel Samepage Merging (KSM) Tuning Daemon. [ OK ] Started LXC network bridge setup. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started LSB: Kernel NFS server support. [ OK ] Started LSB: Start/stop sysstat's sadc. [ OK ] Started LSB: Execute the kexec -e command to reboot system. [ OK ] Started LSB: start the RRDtool data caching daemon. [ OK ] Started Permit User Sessions. Starting LSB: Load kernel image with kexec... Starting Getty on tty1... [ OK ] Started Getty on tty1. Starting Serial Getty on ttyS0... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting PVE Status Daemon... Starting PVE API Daemon... Starting Proxmox VE firewall... [ OK ] Started LSB: Load kernel image with kexec. [ OK ] Started Login Service. [ OK ] Started System Logging Service. Starting LXC Container Initialization and Autoboot Code... [ OK ] Started LXC Container Initialization and Autoboot Code. [ OK ] Started LSB: Postfix Mail Transport Agent. [ OK ] Reached target Mail Transport Agent. [ OK ] Started Proxmox VE firewall. [ 26.729218] ip6_tables: (C) 2000-2006 Netfilter Core Team [ OK ] Started PVE Status Daemon. [ 26.818014] ip_set: protocol 6 [ OK ] Started PVE API Daemon. Starting PVE API Proxy Server... Starting PVE Cluster Ressource Manager Daemon... [ OK ] Started LSB: start Samba daemons for the AD DC. [ OK ] Started LSB: start Samba NetBIOS nameserver (nmbd). Starting LSB: start Samba SMB/CIFS daemon (smbd)... [ OK ] Started PVE Cluster Ressource Manager Daemon. Starting PVE Local HA Ressource Manager Daemon... [ OK ] Started LSB: start Samba SMB/CIFS daemon (smbd). [ OK ] Started PVE API Proxy Server. Starting PVE SPICE Proxy Server... Starting PVE VM Manager... [ OK ] Started PVE Local HA Ressource Manager Daemon. [ OK ] Started PVE SPICE Proxy Server. [ OK ] Started PVE VM Manager. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes.

Welcome to the Proxmox Virtual Environment. Please use your web browser to configure this server - connect to:

https://192.168.1.11:8006/

apollo login:

[ 162.052828] device tap100i0 entered promiscuous mode [ 162.080369] vmbr0: port 2(tap100i0) entered forwarding state [ 162.107457] vmbr0: port 2(tap100i0) entered forwarding state [ 166.062649] device tap102i0 entered promiscuous mode [ 166.090255] vmbr0: port 3(tap102i0) entered forwarding state [ 166.117794] vmbr0: port 3(tap102i0) entered forwarding state [ 8050.380431] perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 500 00 [ 8490.956225] usb 3-1.1: new high-speed USB device number 3 using ehci-pci [ 8491.149464] usb 3-1.1: New USB device found, idVendor=1058, idProduct=10b8 [ 8491.182598] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 8491.218462] usb 3-1.1: Product: Elements 10B8 [ 8491.239900] usb 3-1.1: Manufacturer: Western Digital [ 8491.263315] usb 3-1.1: SerialNumber: 575847314141333139343639 [ 8491.292595] usb-storage 3-1.1:1.0: USB Mass Storage device detected [ 8491.322888] scsi host8: usb-storage 3-1.1:1.0 [ 8492.344679] scsi 8:0:0:0: Direct-Access WD Elements 10B8 1007 PQ: 0 ANSI: 6 [ 8492.384089] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 8492.387785] sd 8:0:0:0: [sdg] Spinning up disk... [ 8493.392133] ......ready [ 8498.439987] sd 8:0:0:0: [sdg] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8498.478840] sd 8:0:0:0: [sdg] Write Protect is off [ 8498.503343] sd 8:0:0:0: [sdg] No Caching mode page found [ 8498.528883] sd 8:0:0:0: [sdg] Assuming drive cache: write through [ 8498.615841] sdg: sdg1 [ 8498.630595] sd 8:0:0:0: [sdg] Attached SCSI disk [ 9011.778288] hfsplus: write access to a journaled filesystem is not supported, use the force option at you r own risk, mounting read-only.

Welcome to the Proxmox Virtual Environment. Please use your web browser to configure this server - connect to:

https://192.168.1.111:8006/

apollo login:

Welcome to the Proxmox Virtual Environment. Please use your web browser to configure this server - connect to:

https://192.168.1.111:8006/

apollo login: [ 9500.744813] Kernel panic - not syncing: An NMI occurred. Depending on your system the reaso n for the NMI is logged in any one of the following resources: [ 9500.744813] 1. Integrated Management Log (IML) [ 9500.744813] 2. OA Syslog [ 9500.744813] 3. OA Forward Progress Log [ 9500.744813] 4. iLO Event Log [ 9500.877554] CPU: 0 PID: 486 Comm: z_wr_int_7 Tainted: P O 4.2.2-1-pve #1 [ 9500.915211] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16/2015 [ 9500.949574] 000008a41084f25a ffff8803fa205d68 ffffffff817c92f3 ffff8803fa2112f8 [ 9500.985652] ffffffffc05472d8 ffff8803fa205de8 ffffffff817c6da4 0000000000000000 [ 9501.021258] 0000000000000008 ffff8803fa205df8 ffff8803fa205d98 0000000000000000 [ 9501.057138] Call Trace: [ 9501.069042] [] dump_stack+0x45/0x57 [ 9501.096927] [] panic+0xc1/0x1fe [ 9501.119976] [] hpwdt_pretimeout+0xc8/0xc8 [hpwdt] [ 9501.150795] [] ? sched_clock+0x9/0x10 [ 9501.176646] [] nmi_handle+0x79/0x100 [ 9501.201817] [] ? nmi_handle+0x83/0x100 [ 9501.227838] [] io_check_error+0x1e/0x90 [ 9501.254256] [] default_do_nmi+0x86/0x100 [ 9501.280868] [] do_nmi+0xea/0x140 [ 9501.304401] [] end_repeat_nmi+0x1a/0x1e [ 9501.330748] [] ? page_referenced+0x84/0x120 [ 9501.358696] [] ? page_referenced+0x84/0x120 [ 9501.386655] [] ? page_referenced+0x84/0x120 [ 9501.414219] <> [] ? page_check_address+0x1a0/0x1a0 [ 9501.448796] [] ? page_get_anon_vma+0x80/0x80 [ 9501.477257] [] shrink_page_list+0x5c0/0x710 [ 9501.505413] [] shrink_inactive_list+0x273/0x520 [ 9501.535396] [] shrink_lruvec+0x5dd/0x7b0 [ 9501.562354] [] shrink_zone+0xdc/0x290 [ 9501.587796] [] do_try_to_free_pages+0x163/0x430 [ 9501.617409] [] try_to_free_pages+0xba/0x130 [ 9501.645406] [] alloc_pages_nodemask+0x60e/0xa30 [ 9501.676567] [] ? sg_alloc_table+0x78/0x160 [ 9501.705577] [] alloc_pages_current+0x9a/0x110 [ 9501.734615] [] new_slab+0x366/0x450 [ 9501.759577] [] slab_alloc+0x3d0/0x4c0 [ 9501.786627] [] ? spl_kmem_cache_alloc+0x69/0x800 [spl] [ 9501.820682] [] ? scsi_request_fn+0x3f/0x640 [ 9501.849860] [] ? spl_kmem_cache_alloc+0x69/0x800 [spl] [ 9501.885389] [] kmem_cache_alloc+0x1a7/0x200 [ 9501.914099] [] spl_kmem_cache_alloc+0x69/0x800 [spl] [ 9501.945625] [] ? generic_make_request+0xcc/0x110 [ 9501.978244] [] ? slab_free+0x14c/0x290 [ 9502.006295] [] zio_create+0x42/0x470 [zfs] [ 9502.035283] [] zio_vdev_delegated_io+0x6f/0x80 [zfs] [ 9502.068338] [] ? vdev_queue_timestamp_compare+0x40/0x40 [zfs] [ 9502.105047] [] vdev_queue_io_to_issue+0x61d/0x8a0 [zfs] [ 9502.138805] [] ? vdev_queue_timestamp_compare+0x40/0x40 [zfs] [ 9502.173454] [] vdev_queue_io_done+0x193/0x250 [zfs] [ 9502.205728] [] zio_vdev_io_done+0x88/0x180 [zfs] [ 9502.236441] [] zio_execute+0xde/0x190 [zfs] [ 9502.264533] [] taskq_thread+0x230/0x420 [spl] [ 9502.293363] [] ? wake_up_q+0x70/0x70 [ 9502.318618] [] ? taskq_cancel_id+0x110/0x110 [spl] [ 9502.349695] [] kthread+0xdb/0x100 [ 9502.373579] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 9502.406001] [] ret_from_fork+0x3f/0x70 [ 9502.432028] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 9502.463507] Kernel Offset: disabled [ 9502.484204] ERST: [Firmware Warn]: Firmware does not respond in time. [ 9502.520039] ERST: [Firmware Warn]: Firmware does not respond in time. [ 9502.551205] ---[ end Kernel panic - not syncing: An NMI occurred. Depending on your system the reason for the NMI is logged in any one of the following resources: [ 9502.551205] 1. Integrated Management Log (IML) [ 9502.551205] 2. OA Syslog [ 9502.551205] 3. OA Forward Progress Log [ 9502.551205] 4. iLO Event Log [ 9502.690480] ------------[ cut here ]------------ [ 9502.715512] WARNING: CPU: 0 PID: 486 at arch/x86/kernel/smp.c:124 native_smp_send_reschedule+0x60/0x70() [ 9502.762874] Modules linked in: nls_utf8 hfsplus ip_set ip6table_filter ip6_tables iptable_filter ip_table s x_tables nfsd auth_rpcgss nfs_acl nfs lockd grace fscache sunrpc ib_iser rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nfnetlink_log nfnetlink intel_rapl iosf _mbi ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp gpio_ich kvm_intel snd_pcm iTCO_wdt kvm crct10 dif_pclmul crc32_pclmul ghash_clmulni_intel hpilo aesni_intel aes_x86_64 snd_timer lrw iTCO_vendor_support h pwdt gf128mul snd joydev input_leds glue_helper ablk_helper cryptd soundcore lpc_ich shpchp ipmi_si ipmi_msg handler psmouse ie31200_edac edac_core 8250_fintek serio_raw acpi_power_meter pcspkr mac_hid vhost_net vhost macvtap macvlan autofs4 zfs(PO) zunicode(PO) zcommon(PO) znvpair(PO) spl(O) zavl(PO) uas usb_storage hid_ge neric usbmouse usbkbd ahci usbhid tg3 libahci ptp hid pps_core mpt2sas raid_class scsi_transport_sas [ 9503.204769] CPU: 0 PID: 486 Comm: z_wr_int_7 Tainted: P O 4.2.2-1-pve #1 [ 9503.248200] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16/2015 [ 9503.285577] ffffffff81a92439 ffff8803fa203d88 ffffffff817c92f3 0000000000000007 [ 9503.325563] 0000000000000000 ffff8803fa203dc8 ffffffff8107776a 0000000000000000 [ 9503.364325] 0000000000000001 ffff8803fa256a00 0000000000000000 ffff8800ed849b80 [ 9503.405360] Call Trace: [ 9503.418229] [] dump_stack+0x45/0x57 [ 9503.451553] [] warn_slowpath_common+0x8a/0xc0 [ 9503.482940] [] warn_slowpath_null+0x1a/0x20 [ 9503.515209] [] native_smp_send_reschedule+0x60/0x70 [ 9503.549871] [] trigger_load_balance+0x13b/0x230 [ 9503.582296] [] scheduler_tick+0xa6/0xd0 [ 9503.611711] [] ? tick_sched_do_timer+0x30/0x30 [ 9503.645166] [] update_process_times+0x51/0x60 [ 9503.677153] [] tick_sched_handle.isra.15+0x25/0x60 [ 9503.711070] [] tick_sched_timer+0x44/0x80 [ 9503.741571] [] hrtimer_run_queues+0xe4/0x200 [ 9503.774272] [] hrtimer_interrupt+0xa8/0x1a0 [ 9503.803259] [] ? do_flush_tlb_all+0x40/0x40 [ 9503.832607] [] local_apic_timer_interrupt+0x3c/0x70 [ 9503.866396] [] smp_apic_timer_interrupt+0x41/0x60 [ 9503.898991] [] apic_timer_interrupt+0x6b/0x70 [ 9503.928193] [] ? panic+0x1bd/0x1fe [ 9503.959385] [] ? panic+0x1b6/0x1fe [ 9503.984463] [] hpwdt_pretimeout+0xc8/0xc8 [hpwdt] [ 9504.015315] [] ? sched_clock+0x9/0x10 [ 9504.045511] [] nmi_handle+0x79/0x100 [ 9504.074394] [] ? nmi_handle+0x83/0x100 [ 9504.103562] [] io_check_error+0x1e/0x90 [ 9504.132425] [] default_do_nmi+0x86/0x100 [ 9504.161966] [] do_nmi+0xea/0x140 [ 9504.187954] [] end_repeat_nmi+0x1a/0x1e [ 9504.214527] [] ? page_referenced+0x84/0x120 [ 9504.246282] [] ? page_referenced+0x84/0x120 [ 9504.276464] [] ? page_referenced+0x84/0x120 [ 9504.307623] <> [] ? page_check_address+0x1a0/0x1a0 [ 9504.344259] [] ? page_get_anon_vma+0x80/0x80 [ 9504.374009] [] shrink_page_list+0x5c0/0x710 [ 9504.406375] [] shrink_inactive_list+0x273/0x520 [ 9504.438788] [] shrink_lruvec+0x5dd/0x7b0 [ 9504.468542] [] shrink_zone+0xdc/0x290 [ 9504.496434] [] do_try_to_free_pages+0x163/0x430 [ 9504.528425] [] try_to_free_pages+0xba/0x130 [ 9504.557808] [] alloc_pages_nodemask+0x60e/0xa30 [ 9504.589173] [] ? sg_alloc_table+0x78/0x160 [ 9504.618014] [] alloc_pages_current+0x9a/0x110 [ 9504.646901] [] new_slab+0x366/0x450 [ 9504.671957] [] slab_alloc+0x3d0/0x4c0 [ 9504.698788] [] ? spl_kmem_cache_alloc+0x69/0x800 [spl] [ 9504.731536] [] ? scsi_request_fn+0x3f/0x640 [ 9504.760039] [] ? spl_kmem_cache_alloc+0x69/0x800 [spl] [ 9504.798720] [] kmem_cache_alloc+0x1a7/0x200 [ 9504.827838] [] spl_kmem_cache_alloc+0x69/0x800 [spl] [ 9504.865036] [] ? generic_make_request+0xcc/0x110 [ 9504.897370] [] ? __slab_free+0x14c/0x290 [ 9504.925321] [] zio_create+0x42/0x470 [zfs] [ 9504.956180] [] zio_vdev_delegated_io+0x6f/0x80 [zfs] [ 9504.992215] [] ? vdev_queue_timestamp_compare+0x40/0x40 [zfs] [ 9505.029963] [] vdev_queue_io_to_issue+0x61d/0x8a0 [zfs] [ 9505.065161] [] ? vdev_queue_timestamp_compare+0x40/0x40 [zfs] [ 9505.103297] [] vdev_queue_io_done+0x193/0x250 [zfs] [ 9505.136628] [] zio_vdev_io_done+0x88/0x180 [zfs] [ 9505.169031] [] zio_execute+0xde/0x190 [zfs] [ 9505.200111] [] taskq_thread+0x230/0x420 [spl] [ 9505.235515] [] ? wake_up_q+0x70/0x70 [ 9505.264688] [] ? taskq_cancel_id+0x110/0x110 [spl] [ 9505.298158] [] kthread+0xdb/0x100 [ 9505.325375] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 9505.359976] [] ret_from_fork+0x3f/0x70 [ 9505.387250] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 9505.421347] ---[ end trace fa0fa2ed71056d9b ]---

behlendorf commented 8 years ago

Closing as stale.