dajhorn
commented
12 years ago Closed arryo closed 12 years ago
dajhorn
commented
12 years ago 
arryo
commented
12 years ago [quote]Some HBAs bring JBOD disks online asynchronously at power-on. Pool import fails if JBOD disks appear after the ZFS driver loads and checks the /etc/zfs/zpool.cache for the list of zpool members. The failure can be sporadic and happens most frequently on computers that use the mpt2sas driver.
Try these fixes in order:
Upgrade the HBA firmware. Disable JBOD and export each disk as a single-element RAID-0 or RAID-1 volume. Put a sleep command in the /etc/init/mountall.conf file like this:[/quote]
My pool imports sucessfully right at boot it just not automount. Regarding to the HBA JBOD, I have flashed to IT firmware so I belived it has only JBOD, so I'm not sure it has raid-0 or raid-1 option. I put a sleep command in /etc/init/mountall.conf, but after reboot, it hangs.
dajhorn
commented
12 years ago Paste the pertinent logs into this ticket.
If the sleep statement hangs the system, then there is probably a kernel trace on the system console. You may need to disable Plymouth to see it. Take a cellphone photo of the crash message if the system is panicked.
Remember to revert all system customizations like the /etc/default/zfs changes.
arryo
commented
12 years ago I have reinstall ubuntu and have 2 pools, 1 attach to HBA, 1 to onboard SATA ports. What logs should I post in here to debug the problem
behlendorf
commented
12 years ago Closing stale issue.
durandalTR
commented
12 years ago I seem to be experiencing the same issue.
I have an IBM M1015 card flashed to IT firmware that hosts 8 of 10 WD Red 3TB disks in a Raidz2 pool configuration. The other 2 disks are on the main board.
Ubuntu 12.04.1 fresh LAMP install with just a few minor extra command line tools. ZFS from the daily PPA.
After booting and logging in mount shows no ZFS filesystems. They are there and ok, but just not automounted. A manual 'zfs mount -a' mounts the filesystems correctly.
I have followed the troubleshooting guide to no avail (https://github.com/dajhorn/pkg-zfs/wiki/Ubuntu-ZFS-mountall-FAQ-and-troubleshooting). Inserting the 'sleep 60' line in the script before the mountall does not solve the issue.
Everything seems to be configured correctly (to me).
Can we reopen this, and hopefully resolve the issue? Is there a reliable workaround for the time being?
root@server2:~# uname -a
Linux server2 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
root@server2:~# apt-cache policy mountall
mountall:
Installed: 2.36-zfs1
Candidate: 2.36-zfs1
Version table:
*** 2.36-zfs1 0
900 http://ppa.launchpad.net/zfs-native/stable/ubuntu/ precise/main amd64 Packages
100 /var/lib/dpkg/status
2.36 0
500 http://nl.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages
root@server2:~# cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
#
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/md0 during installation
UUID=d6a9cd7f-3ab0-4bfa-842c-26bb64573e61 / ext4 noatime,errors=remount-ro 0 1
# /media/news was on /dev/sda3 during installation
UUID=d4ff0407-d605-40b4-b88a-a5c2c6ca3dfa /media/news ext4 noatime 0 2
# /media/tv was on /dev/sdb3 during installation
# -- temporarily removed because the disk has failed
# UUID=6746c1d1-2564-49e6-9a57-256c49223871 /media/tv ext4 noatime 0 2
# swap was on /dev/sda2 during installation
# -- temporarily disabled to see if mountall will work
UUID=e0e15ef9-60a7-4f58-8bb7-4b310c694e79 none swap sw 0 0
# swap was on /dev/sdb2 during installation
# -- temporarily removed because the disk has failed
# UUID=d6ab0904-1dfd-45a6-8a1b-9a93d8086ca6 none swap sw 0 0
root@server2:~# cat /etc/default/zfs
# /etc/default/zfs
#
# Instead of changing these default ZFS options, Debian systems should install
# the zfs-mount package, and Ubuntu systems should install the zfs-mountall
# package. The debian-zfs and ubuntu-zfs metapackages ensure a correct system
# configuration.
#
# If the system runs parallel init jobs, like upstart or systemd, then the
# `zfs mount -a` command races in a way that causes sporadic mount failures.
# Automatically run `zfs mount -a` at system start. Disabled by default.
ZFS_MOUNT='no'
ZFS_UNMOUNT='no'
# Automatically run `zfs share -a` at system start. Disabled by default.
# Requires nfsd and/or smbd. Incompletely implemented for Linux.
ZFS_SHARE='no'
ZFS_UNSHARE='no'
root@server2:~# zpool status
pool: tank
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
scsi-SATA_WDC_WD30EFRX-68_WD-WMC1T0061334 ONLINE 0 0 0
scsi-SATA_WDC_WD30EFRX-68_WD-WMC1T0074252 ONLINE 0 0 0
scsi-SATA_WDC_WD30EFRX-68_WD-WMC1T0074906 ONLINE 0 0 0
scsi-SATA_WDC_WD30EFRX-68_WD-WMC1T0075172 ONLINE 0 0 0
scsi-SATA_WDC_WD30EFRX-68_WD-WMC1T0076274 ONLINE 0 0 0
scsi-SATA_WDC_WD30EFRX-68_WD-WMC1T0078222 ONLINE 0 0 0
scsi-SATA_WDC_WD30EFRX-68_WD-WMC1T0568807 ONLINE 0 0 0
scsi-SATA_WDC_WD30EFRX-68_WD-WMC1T0580606 ONLINE 0 0 0
scsi-SATA_WDC_WD30EFRX-68_WD-WMC1T0656559 ONLINE 0 0 0
scsi-SATA_WDC_WD30EFRX-68_WD-WMC1T0658861 ONLINE 0 0 0
errors: No known data errors
root@server2:~# zfs list
NAME USED AVAIL REFER MOUNTPOINT
tank 4.09T 16.3T 475K /media/data
tank/archive 141G 16.3T 141G /media/data/archive
tank/audio 21.9G 16.3T 21.9G /media/data/audio
tank/backup 36.1G 16.3T 36.1G /media/data/backup
tank/dev 8.02G 16.3T 8.02G /media/data/dev
tank/documents 8.07G 16.3T 8.07G /media/data/documents
tank/ftp 37.6G 16.3T 37.6G /media/data/ftp
tank/pics 35.6G 16.3T 35.6G /media/data/pics
tank/video 3.81T 16.3T 3.81T /media/data/video
tank/web 1.75G 16.3T 1.75G /media/data/web
root@server2:~# mount
/dev/md0 on / type ext4 (rw,noatime,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
/dev/sda3 on /media/news type ext4 (rw,noatime)
root@server2:~# zfs get all tank
NAME PROPERTY VALUE SOURCE
tank type filesystem -
tank creation Tue Oct 23 1:26 2012 -
tank used 4.09T -
tank available 16.3T -
tank referenced 475K -
tank compressratio 1.00x -
tank mounted no -
tank quota none default
tank reservation none default
tank recordsize 128K default
tank mountpoint /media/data local
tank sharenfs off default
tank checksum on default
tank compression off default
tank atime off local
tank devices on default
tank exec on default
tank setuid on default
tank readonly off default
tank zoned off default
tank snapdir hidden default
tank aclinherit restricted default
tank canmount on default
tank xattr on default
tank copies 1 default
tank version 5 -
tank utf8only off -
tank normalization none -
tank casesensitivity sensitive -
tank vscan off default
tank nbmand off default
tank sharesmb off default
tank refquota none default
tank refreservation none default
tank primarycache all default
tank secondarycache all default
tank usedbysnapshots 0 -
tank usedbydataset 475K -
tank usedbychildren 4.09T -
tank usedbyrefreservation 0 -
tank logbias latency default
tank dedup off default
tank mlslabel none default
tank sync standard default
tank refcompressratio 1.00x -
tank written 0 -
mountall --verbose note: this is done manually -after- booting and logging in, and it succeeds
root@server2:~# mountall --verbose / is local /proc is virtual /sys is virtual /sys/fs/fuse/connections is virtual /sys/kernel/debug is virtual /sys/kernel/security is virtual /dev is virtual /dev/pts is virtual /tmp is local /run is virtual /run/lock is virtual /run/shm is virtual /media/news is local UUID=e0e15ef9-60a7-4f58-8bb7-4b310c694e79 is swap /media/data is virtual /media/data/archive is virtual /media/data/audio is virtual /media/data/backup is virtual /media/data/dev is virtual /media/data/documents is virtual /media/data/ftp is virtual /media/data/pics is virtual /media/data/video is virtual /media/data/web is virtual mount / [3162] exited normally mount /proc [3163] exited normally mount /sys [3164] exited normally mount /sys/fs/fuse/connections [3165] exited normally mount /sys/kernel/debug [3166] exited normally mount /sys/kernel/security [3167] exited normally mount /dev [3168] exited normally mount /dev/pts [3169] exited normally mount /run [3170] exited normally mount /run/lock [3171] exited normally mount /run/shm [3172] exited normally mount /media/news [3173] exited normally local 1/3 remote 0/0 virtual 0/20 swap 0/1 local 1/3 remote 0/0 virtual 1/20 swap 0/1 local 1/3 remote 0/0 virtual 2/20 swap 0/1 local 1/3 remote 0/0 virtual 3/20 swap 0/1 local 1/3 remote 0/0 virtual 4/20 swap 0/1 local 1/3 remote 0/0 virtual 5/20 swap 0/1 local 1/3 remote 0/0 virtual 6/20 swap 0/1 local 1/3 remote 0/0 virtual 7/20 swap 0/1 local 1/3 remote 0/0 virtual 8/20 swap 0/1 local 1/3 remote 0/0 virtual 9/20 swap 0/1 local 1/3 remote 0/0 virtual 10/20 swap 0/1 local 2/3 remote 0/0 virtual 10/20 swap 0/1 local 3/3 remote 0/0 virtual 10/20 swap 0/1 activating /dev/disk/by-uuid/e0e15ef9-60a7-4f58-8bb7-4b310c694e79 swapon: /dev/disk/by-uuid/e0e15ef9-60a7-4f58-8bb7-4b310c694e79: swapon failed: Device or resource busy mountall: swapon /dev/disk/by-uuid/e0e15ef9-60a7-4f58-8bb7-4b310c694e79 [3215] terminated with status 255 mountall: Problem activating swap: /dev/disk/by-uuid/e0e15ef9-60a7-4f58-8bb7-4b310c694e79 swap finished local 3/3 remote 0/0 virtual 10/20 swap 1/1 mounting /media/data mount /media/data [3217] exited normally local 3/3 remote 0/0 virtual 11/20 swap 1/1 mounting /media/data/archive mount /media/data/archive [3222] exited normally local 3/3 remote 0/0 virtual 12/20 swap 1/1 mounting /media/data/audio mount /media/data/audio [3271] exited normally local 3/3 remote 0/0 virtual 13/20 swap 1/1 mounting /media/data/backup mount /media/data/backup [3329] exited normally local 3/3 remote 0/0 virtual 14/20 swap 1/1 mounting /media/data/dev mount /media/data/dev [3355] exited normally local 3/3 remote 0/0 virtual 15/20 swap 1/1 mounting /media/data/documents mount /media/data/documents [3358] exited normally local 3/3 remote 0/0 virtual 16/20 swap 1/1 mounting /media/data/ftp mount /media/data/ftp [3361] exited normally local 3/3 remote 0/0 virtual 17/20 swap 1/1 mounting /media/data/pics mount /media/data/pics [3364] exited normally local 3/3 remote 0/0 virtual 18/20 swap 1/1 mounting /media/data/video mount /media/data/video [3367] exited normally local 3/3 remote 0/0 virtual 19/20 swap 1/1 mounting /media/data/web mount /media/data/web [3370] exited normally virtual finished local finished remote finished All filesystems mounted local 3/3 remote 0/0 virtual 20/20 swap 1/1
durandalTR
commented
12 years ago kern.log
Oct 24 19:53:42 server2 kernel: imklog 5.8.6, log source = /proc/kmsg started. Oct 24 19:53:42 server2 kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 24 19:53:42 server2 kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 24 19:53:42 server2 kernel: [ 0.000000] Linux version 3.2.0-32-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 (Ubuntu 3.2.0-32.51-generic 3.2.30) Oct 24 19:53:42 server2 kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic root=UUID=d6a9cd7f-3ab0-4bfa-842c-26bb64573e61 ro Oct 24 19:53:42 server2 kernel: [ 0.000000] KERNEL supported cpus: Oct 24 19:53:42 server2 kernel: [ 0.000000] Intel GenuineIntel Oct 24 19:53:42 server2 kernel: [ 0.000000] AMD AuthenticAMD Oct 24 19:53:42 server2 kernel: [ 0.000000] Centaur CentaurHauls Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-provided physical RAM map: Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000a7c3f000 (usable) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000a7c3f000 - 00000000a7c93000 (ACPI NVS) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000a7c93000 - 00000000a7cb4000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000a7cb4000 - 00000000a7cc5000 (ACPI NVS) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000a7cc5000 - 00000000a7cdb000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000a7cdb000 - 00000000a7cdc000 (usable) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000a7cdc000 - 00000000a7ce4000 (ACPI NVS) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000a7ce4000 - 00000000a7d48000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000a7d48000 - 00000000a7d8b000 (ACPI NVS) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000a7d8b000 - 00000000a7f00000 (usable) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] BIOS-e820: 0000000100001000 - 000000043f000000 (usable) Oct 24 19:53:42 server2 kernel: [ 0.000000] NX (Execute Disable) protection: active Oct 24 19:53:42 server2 kernel: [ 0.000000] DMI 2.6 present. Oct 24 19:53:42 server2 kernel: [ 0.000000] DMI: System manufacturer System Product Name/E45M1-M PRO, BIOS 0502 09/21/2011 Oct 24 19:53:42 server2 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Oct 24 19:53:42 server2 kernel: [ 0.000000] No AGP bridge found Oct 24 19:53:42 server2 kernel: [ 0.000000] last_pfn = 0x43f000 max_arch_pfn = 0x400000000 Oct 24 19:53:42 server2 kernel: [ 0.000000] MTRR default type: uncachable Oct 24 19:53:42 server2 kernel: [ 0.000000] MTRR fixed ranges enabled: Oct 24 19:53:42 server2 kernel: [ 0.000000] 00000-9FFFF write-back Oct 24 19:53:42 server2 kernel: [ 0.000000] A0000-BFFFF write-through Oct 24 19:53:42 server2 kernel: [ 0.000000] C0000-D4FFF write-protect Oct 24 19:53:42 server2 kernel: [ 0.000000] D5000-E7FFF uncachable Oct 24 19:53:42 server2 kernel: [ 0.000000] E8000-FFFFF write-protect Oct 24 19:53:42 server2 kernel: [ 0.000000] MTRR variable ranges enabled: Oct 24 19:53:42 server2 kernel: [ 0.000000] 0 base 000000000 mask F00000000 write-back Oct 24 19:53:42 server2 kernel: [ 0.000000] 1 base 0A7F00000 mask FFFF00000 uncachable Oct 24 19:53:42 server2 kernel: [ 0.000000] 2 base 0A8000000 mask FF8000000 uncachable Oct 24 19:53:42 server2 kernel: [ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable Oct 24 19:53:42 server2 kernel: [ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable Oct 24 19:53:42 server2 kernel: [ 0.000000] 5 disabled Oct 24 19:53:42 server2 kernel: [ 0.000000] 6 disabled Oct 24 19:53:42 server2 kernel: [ 0.000000] 7 disabled Oct 24 19:53:42 server2 kernel: [ 0.000000] TOM2: 000000043f000000 aka 17392M Oct 24 19:53:42 server2 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Oct 24 19:53:42 server2 kernel: [ 0.000000] original variable MTRRs Oct 24 19:53:42 server2 kernel: [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB Oct 24 19:53:42 server2 kernel: [ 0.000000] reg 1, base: 2687MB, range: 1MB, type UC Oct 24 19:53:42 server2 kernel: [ 0.000000] reg 2, base: 2688MB, range: 128MB, type UC Oct 24 19:53:42 server2 kernel: [ 0.000000] reg 3, base: 2816MB, range: 256MB, type UC Oct 24 19:53:42 server2 kernel: [ 0.000000] reg 4, base: 3GB, range: 1GB, type UC Oct 24 19:53:42 server2 kernel: [ 0.000000] total RAM covered: 2687M Oct 24 19:53:42 server2 kernel: [ 0.000000] Found optimal setting for mtrr clean up Oct 24 19:53:42 server2 kernel: [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G Oct 24 19:53:42 server2 kernel: [ 0.000000] New variable MTRRs Oct 24 19:53:42 server2 kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Oct 24 19:53:42 server2 kernel: [ 0.000000] reg 1, base: 2GB, range: 512MB, type WB Oct 24 19:53:42 server2 kernel: [ 0.000000] reg 2, base: 2560MB, range: 128MB, type WB Oct 24 19:53:42 server2 kernel: [ 0.000000] reg 3, base: 2687MB, range: 1MB, type UC Oct 24 19:53:42 server2 kernel: [ 0.000000] e820 update range: 00000000a7f00000 - 0000000100000000 (usable) ==> (reserved) Oct 24 19:53:42 server2 kernel: [ 0.000000] last_pfn = 0xa7f00 max_arch_pfn = 0x400000000 Oct 24 19:53:42 server2 kernel: [ 0.000000] found SMP MP-table at [ffff8800000fce00] fce00 Oct 24 19:53:42 server2 kernel: [ 0.000000] initial memory mapped : 0 - 20000000 Oct 24 19:53:42 server2 kernel: [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480 Oct 24 19:53:42 server2 kernel: [ 0.000000] Using GB pages for direct mapping Oct 24 19:53:42 server2 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000a7f00000 Oct 24 19:53:42 server2 kernel: [ 0.000000] 0000000000 - 0080000000 page 1G Oct 24 19:53:42 server2 kernel: [ 0.000000] 0080000000 - 00a7e00000 page 2M Oct 24 19:53:42 server2 kernel: [ 0.000000] 00a7e00000 - 00a7f00000 page 4k Oct 24 19:53:42 server2 kernel: [ 0.000000] kernel direct mapping tables up to a7f00000 @ 1fffd000-20000000 Oct 24 19:53:42 server2 kernel: [ 0.000000] init_memory_mapping: 0000000100000000-000000043f000000 Oct 24 19:53:42 server2 kernel: [ 0.000000] 0100000000 - 0400000000 page 1G Oct 24 19:53:42 server2 kernel: [ 0.000000] 0400000000 - 043f000000 page 2M Oct 24 19:53:42 server2 kernel: [ 0.000000] kernel direct mapping tables up to 43f000000 @ a7efe000-a7f00000 Oct 24 19:53:42 server2 kernel: [ 0.000000] RAMDISK: 36414000 - 37202000 Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 ALASKA) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: XSDT 00000000a7c88068 00054 (v01 ALASKA A M I 01072009 AMI 00010013) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: FACP 00000000a7c8e2e8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: DSDT 00000000a7c88150 06192 (v02 ALASKA A M I 00000000 INTL 20051117) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: FACS 00000000a7ce3f80 00040 Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: APIC 00000000a7c8e3e0 00062 (v03 ALASKA A M I 01072009 AMI 00010013) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: MCFG 00000000a7c8e448 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: HPET 00000000a7c8e488 00038 (v01 ALASKA A M I 01072009 AMI 00000004) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: SSDT 00000000a7c8e4c0 003DE (v01 AMD POWERNOW 00000001 AMD 00000001) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: SSDT 00000000a7c8e8a0 0168E (v02 AMD ALIB 00000001 MSFT 04000000) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 24 19:53:42 server2 kernel: [ 0.000000] No NUMA configuration found Oct 24 19:53:42 server2 kernel: [ 0.000000] Faking a node at 0000000000000000-000000043f000000 Oct 24 19:53:42 server2 kernel: [ 0.000000] Initmem setup node 0 0000000000000000-000000043f000000 Oct 24 19:53:42 server2 kernel: [ 0.000000] NODE_DATA [000000043effb000 - 000000043effffff] Oct 24 19:53:42 server2 kernel: [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042ec00000-ffff88043e5fffff] on node 0 Oct 24 19:53:42 server2 kernel: [ 0.000000] Zone PFN ranges: Oct 24 19:53:42 server2 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Oct 24 19:53:42 server2 kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 Oct 24 19:53:42 server2 kernel: [ 0.000000] Normal 0x00100000 -> 0x0043f000 Oct 24 19:53:42 server2 kernel: [ 0.000000] Movable zone start PFN for each node Oct 24 19:53:42 server2 kernel: [ 0.000000] early_node_map[5] active PFN ranges Oct 24 19:53:42 server2 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009c Oct 24 19:53:42 server2 kernel: [ 0.000000] 0: 0x00000100 -> 0x000a7c3f Oct 24 19:53:42 server2 kernel: [ 0.000000] 0: 0x000a7cdb -> 0x000a7cdc Oct 24 19:53:42 server2 kernel: [ 0.000000] 0: 0x000a7d8b -> 0x000a7f00 Oct 24 19:53:42 server2 kernel: [ 0.000000] 0: 0x00100001 -> 0x0043f000 Oct 24 19:53:42 server2 kernel: [ 0.000000] On node 0 totalpages: 4091200 Oct 24 19:53:42 server2 kernel: [ 0.000000] DMA zone: 64 pages used for memmap Oct 24 19:53:42 server2 kernel: [ 0.000000] DMA zone: 5 pages reserved Oct 24 19:53:42 server2 kernel: [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 Oct 24 19:53:42 server2 kernel: [ 0.000000] DMA32 zone: 16320 pages used for memmap Oct 24 19:53:42 server2 kernel: [ 0.000000] DMA32 zone: 667125 pages, LIFO batch:31 Oct 24 19:53:42 server2 kernel: [ 0.000000] Normal zone: 53184 pages used for memmap Oct 24 19:53:42 server2 kernel: [ 0.000000] Normal zone: 3350591 pages, LIFO batch:31 Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) Oct 24 19:53:42 server2 kernel: [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: IRQ0 used by override. Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: IRQ2 used by override. Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: IRQ9 used by override. Oct 24 19:53:42 server2 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Oct 24 19:53:42 server2 kernel: [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 Oct 24 19:53:42 server2 kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs Oct 24 19:53:42 server2 kernel: [ 0.000000] nr_irqs_gsi: 40 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000a7c3f000 - 00000000a7c93000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000a7c93000 - 00000000a7cb4000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000a7cb4000 - 00000000a7cc5000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000a7cc5000 - 00000000a7cdb000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000a7cdc000 - 00000000a7ce4000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000a7ce4000 - 00000000a7d48000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000a7d48000 - 00000000a7d8b000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000a7f00000 - 00000000e0000000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000 Oct 24 19:53:42 server2 kernel: [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000 Oct 24 19:53:42 server2 kernel: [ 0.000000] Allocating PCI resources starting at a7f00000 (gap: a7f00000:38100000) Oct 24 19:53:42 server2 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Oct 24 19:53:42 server2 kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 Oct 24 19:53:42 server2 kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043ec00000 s83136 r8192 d23360 u1048576 Oct 24 19:53:42 server2 kernel: [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152 Oct 24 19:53:42 server2 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 Oct 24 19:53:42 server2 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4021627 Oct 24 19:53:42 server2 kernel: [ 0.000000] Policy zone: Normal Oct 24 19:53:42 server2 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic root=UUID=d6a9cd7f-3ab0-4bfa-842c-26bb64573e61 ro Oct 24 19:53:42 server2 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Oct 24 19:53:42 server2 kernel: [ 0.000000] Checking aperture... Oct 24 19:53:42 server2 kernel: [ 0.000000] No AGP bridge found Oct 24 19:53:42 server2 kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area Oct 24 19:53:42 server2 kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Oct 24 19:53:42 server2 kernel: [ 0.000000] Memory: 16012420k/17809408k available (6560k kernel code, 1444608k absent, 352380k reserved, 6639k data, 924k init) Oct 24 19:53:42 server2 kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 24 19:53:42 server2 kernel: [ 0.000000] Hierarchical RCU implementation. Oct 24 19:53:42 server2 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Oct 24 19:53:42 server2 kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 Oct 24 19:53:42 server2 kernel: [ 0.000000] Extended CMOS year: 2000 Oct 24 19:53:42 server2 kernel: [ 0.000000] spurious 8259A interrupt: IRQ7. Oct 24 19:53:42 server2 kernel: [ 0.000000] Console: colour VGA+ 80x25 Oct 24 19:53:42 server2 kernel: [ 0.000000] console [tty0] enabled Oct 24 19:53:42 server2 kernel: [ 0.000000] allocated 131072000 bytes of page_cgroup Oct 24 19:53:42 server2 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 24 19:53:42 server2 kernel: [ 0.000000] hpet clockevent registered Oct 24 19:53:42 server2 kernel: [ 0.000000] Fast TSC calibration using PIT Oct 24 19:53:42 server2 kernel: [ 0.000000] Detected 1649.907 MHz processor. Oct 24 19:53:42 server2 kernel: [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3299.81 BogoMIPS (lpj=6599628) Oct 24 19:53:42 server2 kernel: [ 0.004103] pid_max: default: 32768 minimum: 301 Oct 24 19:53:42 server2 kernel: [ 0.004188] Security Framework initialized Oct 24 19:53:42 server2 kernel: [ 0.004261] AppArmor: AppArmor initialized Oct 24 19:53:42 server2 kernel: [ 0.004307] Yama: becoming mindful. Oct 24 19:53:42 server2 kernel: [ 0.006625] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Oct 24 19:53:42 server2 kernel: [ 0.017312] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Oct 24 19:53:42 server2 kernel: [ 0.022065] Mount-cache hash table entries: 256 Oct 24 19:53:42 server2 kernel: [ 0.022365] Initializing cgroup subsys cpuacct Oct 24 19:53:42 server2 kernel: [ 0.022437] Initializing cgroup subsys memory Oct 24 19:53:42 server2 kernel: [ 0.022497] Initializing cgroup subsys devices Oct 24 19:53:42 server2 kernel: [ 0.022544] Initializing cgroup subsys freezer Oct 24 19:53:42 server2 kernel: [ 0.022591] Initializing cgroup subsys blkio Oct 24 19:53:42 server2 kernel: [ 0.022646] Initializing cgroup subsys perf_event Oct 24 19:53:42 server2 kernel: [ 0.022750] tseg: 00a7f00000 Oct 24 19:53:42 server2 kernel: [ 0.022755] CPU: Physical Processor ID: 0 Oct 24 19:53:42 server2 kernel: [ 0.022816] CPU: Processor Core ID: 0 Oct 24 19:53:42 server2 kernel: [ 0.022862] mce: CPU supports 6 MCE banks Oct 24 19:53:42 server2 kernel: [ 0.027445] ACPI: Core revision 20110623 Oct 24 19:53:42 server2 kernel: [ 0.033835] ftrace: allocating 27014 entries in 106 pages Oct 24 19:53:42 server2 kernel: [ 0.036501] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Oct 24 19:53:42 server2 kernel: [ 0.076353] CPU0: AMD E-450 APU with Radeon(tm) HD Graphics stepping 00 Oct 24 19:53:42 server2 kernel: [ 0.080004] Performance Events: AMD PMU driver. Oct 24 19:53:42 server2 kernel: [ 0.080004] ... version: 0 Oct 24 19:53:42 server2 kernel: [ 0.080004] ... bit width: 48 Oct 24 19:53:42 server2 kernel: [ 0.080004] ... generic registers: 4 Oct 24 19:53:42 server2 kernel: [ 0.080004] ... value mask: 0000ffffffffffff Oct 24 19:53:42 server2 kernel: [ 0.080004] ... max period: 00007fffffffffff Oct 24 19:53:42 server2 kernel: [ 0.080004] ... fixed-purpose events: 0 Oct 24 19:53:42 server2 kernel: [ 0.080004] ... event mask: 000000000000000f Oct 24 19:53:42 server2 kernel: [ 0.080004] NMI watchdog enabled, takes one hw-pmu counter. Oct 24 19:53:42 server2 kernel: [ 0.080004] Booting Node 0, Processors #1 Ok. Oct 24 19:53:42 server2 kernel: [ 0.080004] smpboot cpu 1: start_ip = 97000 Oct 24 19:53:42 server2 kernel: [ 0.168048] NMI watchdog enabled, takes one hw-pmu counter. Oct 24 19:53:42 server2 kernel: [ 0.168160] Brought up 2 CPUs Oct 24 19:53:42 server2 kernel: [ 0.168220] Total of 2 processors activated (6599.71 BogoMIPS). Oct 24 19:53:42 server2 kernel: [ 0.168854] devtmpfs: initialized Oct 24 19:53:42 server2 kernel: [ 0.173934] EVM: security.selinux Oct 24 19:53:42 server2 kernel: [ 0.173980] EVM: security.SMACK64 Oct 24 19:53:42 server2 kernel: [ 0.174024] EVM: security.capability Oct 24 19:53:42 server2 kernel: [ 0.174300] PM: Registering ACPI NVS region at a7c3f000 (344064 bytes) Oct 24 19:53:42 server2 kernel: [ 0.174300] PM: Registering ACPI NVS region at a7cb4000 (69632 bytes) Oct 24 19:53:42 server2 kernel: [ 0.174300] PM: Registering ACPI NVS region at a7cdc000 (32768 bytes) Oct 24 19:53:42 server2 kernel: [ 0.174300] PM: Registering ACPI NVS region at a7d48000 (274432 bytes) Oct 24 19:53:42 server2 kernel: [ 0.176406] print_constraints: dummy: Oct 24 19:53:42 server2 kernel: [ 0.176498] RTC time: 17:52:29, date: 10/24/12 Oct 24 19:53:42 server2 kernel: [ 0.176611] NET: Registered protocol family 16 Oct 24 19:53:42 server2 kernel: [ 0.176802] Trying to unpack rootfs image as initramfs... Oct 24 19:53:42 server2 kernel: [ 0.177060] Extended Config Space enabled on 0 nodes Oct 24 19:53:42 server2 kernel: [ 0.177094] ACPI: bus type pci registered Oct 24 19:53:42 server2 kernel: [ 0.177221] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff](base 0xe0000000) Oct 24 19:53:42 server2 kernel: [ 0.177285] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Oct 24 19:53:42 server2 kernel: [ 0.228937] PCI: Using configuration type 1 for base access Oct 24 19:53:42 server2 kernel: [ 0.232606] bio: create slabat 0 Oct 24 19:53:42 server2 kernel: [ 0.232851] ACPI: Added _OSI(Module Device) Oct 24 19:53:42 server2 kernel: [ 0.232904] ACPI: Added _OSI(Processor Device) Oct 24 19:53:42 server2 kernel: [ 0.232950] ACPI: Added _OSI(3.0 _SCP Extensions) Oct 24 19:53:42 server2 kernel: [ 0.232996] ACPI: Added _OSI(Processor Aggregator Device) Oct 24 19:53:42 server2 kernel: [ 0.234477] ACPI: EC: Look up EC in DSDT Oct 24 19:53:42 server2 kernel: [ 0.236494] ACPI: Executed 3 blocks of module-level executable AML code Oct 24 19:53:42 server2 kernel: [ 0.268690] ACPI: Interpreter enabled Oct 24 19:53:42 server2 kernel: [ 0.268762] ACPI: (supports S0 S3 S4 S5) Oct 24 19:53:42 server2 kernel: [ 0.268967] ACPI: Using IOAPIC for interrupt routing Oct 24 19:53:42 server2 kernel: [ 0.277185] ACPI: No dock devices found. Oct 24 19:53:42 server2 kernel: [ 0.277254] HEST: Table not found. Oct 24 19:53:42 server2 kernel: [ 0.277304] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Oct 24 19:53:42 server2 kernel: [ 0.277589] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-ff]) Oct 24 19:53:42 server2 kernel: [ 0.278074] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] Oct 24 19:53:42 server2 kernel: [ 0.278129] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] Oct 24 19:53:42 server2 kernel: [ 0.278179] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] Oct 24 19:53:42 server2 kernel: [ 0.278236] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] Oct 24 19:53:42 server2 kernel: [ 0.278294] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] Oct 24 19:53:42 server2 kernel: [ 0.278356] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff](conflicts with Video ROM [mem 0x000c0000-0x000ce3ff]) Oct 24 19:53:42 server2 kernel: [ 0.278435] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600 Oct 24 19:53:42 server2 kernel: [ 0.278497] pci 0000:00:01.0: [1002:9806] type 0 class 0x000300 Oct 24 19:53:42 server2 kernel: [ 0.278512] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref] Oct 24 19:53:42 server2 kernel: [ 0.278523] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff] Oct 24 19:53:42 server2 kernel: [ 0.278534] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff] Oct 24 19:53:42 server2 kernel: [ 0.278598] pci 0000:00:01.0: supports D1 D2 Oct 24 19:53:42 server2 kernel: [ 0.278624] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403 Oct 24 19:53:42 server2 kernel: [ 0.278637] pci 0000:00:01.1: reg 10: [mem 0xfeb40000-0xfeb43fff] Oct 24 19:53:42 server2 kernel: [ 0.278712] pci 0000:00:01.1: supports D1 D2 Oct 24 19:53:42 server2 kernel: [ 0.278760] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604 Oct 24 19:53:42 server2 kernel: [ 0.278839] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold Oct 24 19:53:42 server2 kernel: [ 0.278845] pci 0000:00:04.0: PME# disabled Oct 24 19:53:42 server2 kernel: [ 0.278908] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 Oct 24 19:53:42 server2 kernel: [ 0.278934] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147] Oct 24 19:53:42 server2 kernel: [ 0.278949] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133] Oct 24 19:53:42 server2 kernel: [ 0.278963] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127] Oct 24 19:53:42 server2 kernel: [ 0.278977] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113] Oct 24 19:53:42 server2 kernel: [ 0.278991] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f] Oct 24 19:53:42 server2 kernel: [ 0.279005] pci 0000:00:11.0: reg 24: [mem 0xfeb4b000-0xfeb4b3ff] Oct 24 19:53:42 server2 kernel: [ 0.279085] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 Oct 24 19:53:42 server2 kernel: [ 0.279103] pci 0000:00:12.0: reg 10: [mem 0xfeb4a000-0xfeb4afff] Oct 24 19:53:42 server2 kernel: [ 0.279199] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 Oct 24 19:53:42 server2 kernel: [ 0.279225] pci 0000:00:12.2: reg 10: [mem 0xfeb49000-0xfeb490ff] Oct 24 19:53:42 server2 kernel: [ 0.279333] pci 0000:00:12.2: supports D1 D2 Oct 24 19:53:42 server2 kernel: [ 0.279337] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot Oct 24 19:53:42 server2 kernel: [ 0.279343] pci 0000:00:12.2: PME# disabled Oct 24 19:53:42 server2 kernel: [ 0.279373] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 Oct 24 19:53:42 server2 kernel: [ 0.279392] pci 0000:00:13.0: reg 10: [mem 0xfeb48000-0xfeb48fff] Oct 24 19:53:42 server2 kernel: [ 0.279493] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 Oct 24 19:53:42 server2 kernel: [ 0.279519] pci 0000:00:13.2: reg 10: [mem 0xfeb47000-0xfeb470ff] Oct 24 19:53:42 server2 kernel: [ 0.279627] pci 0000:00:13.2: supports D1 D2 Oct 24 19:53:42 server2 kernel: [ 0.279631] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot Oct 24 19:53:42 server2 kernel: [ 0.279637] pci 0000:00:13.2: PME# disabled Oct 24 19:53:42 server2 kernel: [ 0.279667] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 Oct 24 19:53:42 server2 kernel: [ 0.279771] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 Oct 24 19:53:42 server2 kernel: [ 0.279872] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 Oct 24 19:53:42 server2 kernel: [ 0.279930] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 Oct 24 19:53:42 server2 kernel: [ 0.279949] pci 0000:00:14.5: reg 10: [mem 0xfeb46000-0xfeb46fff] Oct 24 19:53:42 server2 kernel: [ 0.280074] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 Oct 24 19:53:42 server2 kernel: [ 0.280179] pci 0000:00:15.0: supports D1 D2 Oct 24 19:53:42 server2 kernel: [ 0.280215] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604 Oct 24 19:53:42 server2 kernel: [ 0.280319] pci 0000:00:15.1: supports D1 D2 Oct 24 19:53:42 server2 kernel: [ 0.280356] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604 Oct 24 19:53:42 server2 kernel: [ 0.280460] pci 0000:00:15.2: supports D1 D2 Oct 24 19:53:42 server2 kernel: [ 0.280502] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 Oct 24 19:53:42 server2 kernel: [ 0.280521] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff] Oct 24 19:53:42 server2 kernel: [ 0.280618] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 Oct 24 19:53:42 server2 kernel: [ 0.280643] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff] Oct 24 19:53:42 server2 kernel: [ 0.280751] pci 0000:00:16.2: supports D1 D2 Oct 24 19:53:42 server2 kernel: [ 0.280755] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot Oct 24 19:53:42 server2 kernel: [ 0.280761] pci 0000:00:16.2: PME# disabled Oct 24 19:53:42 server2 kernel: [ 0.280793] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600 Oct 24 19:53:42 server2 kernel: [ 0.280843] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600 Oct 24 19:53:42 server2 kernel: [ 0.280887] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600 Oct 24 19:53:42 server2 kernel: [ 0.280934] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600 Oct 24 19:53:42 server2 kernel: [ 0.280993] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600 Oct 24 19:53:42 server2 kernel: [ 0.281037] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600 Oct 24 19:53:42 server2 kernel: [ 0.281085] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600 Oct 24 19:53:42 server2 kernel: [ 0.281130] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600 Oct 24 19:53:42 server2 kernel: [ 0.281261] pci 0000:01:00.0: [1000:0072] type 0 class 0x000107 Oct 24 19:53:42 server2 kernel: [ 0.281276] pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff] Oct 24 19:53:42 server2 kernel: [ 0.281293] pci 0000:01:00.0: reg 14: [mem 0xfeac0000-0xfeac3fff 64bit] Oct 24 19:53:42 server2 kernel: [ 0.281309] pci 0000:01:00.0: reg 1c: [mem 0xfea80000-0xfeabffff 64bit] Oct 24 19:53:42 server2 kernel: [ 0.281328] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea7ffff pref] Oct 24 19:53:42 server2 kernel: [ 0.281385] pci 0000:01:00.0: supports D1 D2 Oct 24 19:53:42 server2 kernel: [ 0.281419] pci 0000:01:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit] Oct 24 19:53:42 server2 kernel: [ 0.281432] pci 0000:01:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit] Oct 24 19:53:42 server2 kernel: [ 0.288080] pci 0000:00:04.0: PCI bridge to [bus 01-01] Oct 24 19:53:42 server2 kernel: [ 0.288142] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] Oct 24 19:53:42 server2 kernel: [ 0.288149] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff] Oct 24 19:53:42 server2 kernel: [ 0.288243] pci 0000:00:14.4: PCI bridge to [bus 02-02](subtractive decode) Oct 24 19:53:42 server2 kernel: [ 0.288303] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7](subtractive decode) Oct 24 19:53:42 server2 kernel: [ 0.288308] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff](subtractive decode) Oct 24 19:53:42 server2 kernel: [ 0.288313] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff](subtractive decode) Oct 24 19:53:42 server2 kernel: [ 0.288317] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff](subtractive decode) Oct 24 19:53:42 server2 kernel: [ 0.288387] pci 0000:00:15.0: PCI bridge to [bus 03-03] Oct 24 19:53:42 server2 kernel: [ 0.288539] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200 Oct 24 19:53:42 server2 kernel: [ 0.288567] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff] Oct 24 19:53:42 server2 kernel: [ 0.288607] pci 0000:04:00.0: reg 18: [mem 0xd8004000-0xd8004fff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.288633] pci 0000:04:00.0: reg 20: [mem 0xd8000000-0xd8003fff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.288742] pci 0000:04:00.0: supports D1 D2 Oct 24 19:53:42 server2 kernel: [ 0.288746] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 24 19:53:42 server2 kernel: [ 0.288755] pci 0000:04:00.0: PME# disabled Oct 24 19:53:42 server2 kernel: [ 0.296089] pci 0000:00:15.1: PCI bridge to [bus 04-04] Oct 24 19:53:42 server2 kernel: [ 0.296154] pci 0000:00:15.1: bridge window [io 0xd000-0xdfff] Oct 24 19:53:42 server2 kernel: [ 0.296168] pci 0000:00:15.1: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.296269] pci 0000:05:00.0: [1b21:1080] type 1 class 0x000604 Oct 24 19:53:42 server2 kernel: [ 0.296417] pci 0000:00:15.2: PCI bridge to [bus 05-06] Oct 24 19:53:42 server2 kernel: [ 0.296470] pci 0000:00:15.2: bridge window [io 0xc000-0xcfff] Oct 24 19:53:42 server2 kernel: [ 0.296476] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff] Oct 24 19:53:42 server2 kernel: [ 0.296486] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.296554] pci 0000:06:00.0: [4444:0016] type 0 class 0x000400 Oct 24 19:53:42 server2 kernel: [ 0.296591] pci 0000:06:00.0: reg 10: [mem 0xd4000000-0xd7ffffff pref] Oct 24 19:53:42 server2 kernel: [ 0.296781] pci 0000:06:01.0: [4444:0016] type 0 class 0x000400 Oct 24 19:53:42 server2 kernel: [ 0.296817] pci 0000:06:01.0: reg 10: [mem 0xd0000000-0xd3ffffff pref] Oct 24 19:53:42 server2 kernel: [ 0.297060] pci 0000:05:00.0: PCI bridge to [bus 06-06](subtractive decode) Oct 24 19:53:42 server2 kernel: [ 0.297118] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] Oct 24 19:53:42 server2 kernel: [ 0.297125] pci 0000:05:00.0: bridge window [mem 0xfe900000-0xfe9fffff] Oct 24 19:53:42 server2 kernel: [ 0.297138] pci 0000:05:00.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.297143] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff](subtractive decode) Oct 24 19:53:42 server2 kernel: [ 0.297147] pci 0000:05:00.0: bridge window [mem 0xfe900000-0xfe9fffff](subtractive decode) Oct 24 19:53:42 server2 kernel: [ 0.297152] pci 0000:05:00.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref](subtractive decode) Oct 24 19:53:42 server2 kernel: [ 0.297157] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0](subtractive decode) Oct 24 19:53:42 server2 kernel: [ 0.297213] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] Oct 24 19:53:42 server2 kernel: [ 0.297555] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.BR14._PRT] Oct 24 19:53:42 server2 kernel: [ 0.297614] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PE20._PRT] Oct 24 19:53:42 server2 kernel: [ 0.297669] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PE21._PRT] Oct 24 19:53:42 server2 kernel: [ 0.297741] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PE22._PRT] Oct 24 19:53:42 server2 kernel: [ 0.297800] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PE22.BR23._PRT] Oct 24 19:53:42 server2 kernel: [ 0.297886] pci0000:00: Requesting ACPI _OSC control (0x1d) Oct 24 19:53:42 server2 kernel: [ 0.297953] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d Oct 24 19:53:42 server2 kernel: [ 0.298011] ACPI _OSC control for PCIe not granted, disabling ASPM Oct 24 19:53:42 server2 kernel: [ 0.308212] ACPI: PCI Interrupt Link [LNKA](IRQs 4 7 10 11 14 15) *0 Oct 24 19:53:42 server2 kernel: [ 0.308679] ACPI: PCI Interrupt Link [LNKB](IRQs 4 7 10 11 14 15) *0 Oct 24 19:53:42 server2 kernel: [ 0.309124] ACPI: PCI Interrupt Link [LNKC](IRQs 4 7 10 11 14 15) *0 Oct 24 19:53:42 server2 kernel: [ 0.309567] ACPI: PCI Interrupt Link [LNKD](IRQs 4 7 10 11 14 15) *0 Oct 24 19:53:42 server2 kernel: [ 0.309988] ACPI: PCI Interrupt Link [LNKE](IRQs 4 7 10 11 14 15) *0 Oct 24 19:53:42 server2 kernel: [ 0.310389] ACPI: PCI Interrupt Link [LNKF](IRQs 4 7 10 11 14 15) *0 Oct 24 19:53:42 server2 kernel: [ 0.310794] ACPI: PCI Interrupt Link [LNKG](IRQs 4 7 10 11 14 15) *0 Oct 24 19:53:42 server2 kernel: [ 0.311212] ACPI: PCI Interrupt Link [LNKH](IRQs 4 7 10 11 14 15) *0 Oct 24 19:53:42 server2 kernel: [ 0.311760] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none Oct 24 19:53:42 server2 kernel: [ 0.311844] vgaarb: loaded Oct 24 19:53:42 server2 kernel: [ 0.311887] vgaarb: bridge control possible 0000:00:01.0 Oct 24 19:53:42 server2 kernel: [ 0.312166] i2c-core: driver [aat2870] using legacy suspend method Oct 24 19:53:42 server2 kernel: [ 0.312229] i2c-core: driver [aat2870] using legacy resume method Oct 24 19:53:42 server2 kernel: [ 0.312402] SCSI subsystem initialized Oct 24 19:53:42 server2 kernel: [ 0.312578] libata version 3.00 loaded. Oct 24 19:53:42 server2 kernel: [ 0.312667] usbcore: registered new interface driver usbfs Oct 24 19:53:42 server2 kernel: [ 0.312734] usbcore: registered new interface driver hub Oct 24 19:53:42 server2 kernel: [ 0.312835] usbcore: registered new device driver usb Oct 24 19:53:42 server2 kernel: [ 0.313070] PCI: Using ACPI for IRQ routing Oct 24 19:53:42 server2 kernel: [ 0.323715] PCI: pci_cache_line_size set to 64 bytes Oct 24 19:53:42 server2 kernel: [ 0.323883] reserve RAM buffer: 000000000009c400 - 000000000009ffff Oct 24 19:53:42 server2 kernel: [ 0.323888] reserve RAM buffer: 00000000a7c3f000 - 00000000a7ffffff Oct 24 19:53:42 server2 kernel: [ 0.323894] reserve RAM buffer: 00000000a7cdc000 - 00000000a7ffffff Oct 24 19:53:42 server2 kernel: [ 0.323899] reserve RAM buffer: 00000000a7f00000 - 00000000a7ffffff Oct 24 19:53:42 server2 kernel: [ 0.323903] reserve RAM buffer: 000000043f000000 - 000000043fffffff Oct 24 19:53:42 server2 kernel: [ 0.324105] NetLabel: Initializing Oct 24 19:53:42 server2 kernel: [ 0.324151] NetLabel: domain hash size = 128 Oct 24 19:53:42 server2 kernel: [ 0.324196] NetLabel: protocols = UNLABELED CIPSOv4 Oct 24 19:53:42 server2 kernel: [ 0.324261] NetLabel: unlabeled traffic allowed by default Oct 24 19:53:42 server2 kernel: [ 0.324424] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Oct 24 19:53:42 server2 kernel: [ 0.324599] hpet0: 3 comparators, 32-bit 14.318180 MHz counter Oct 24 19:53:42 server2 kernel: [ 0.326682] Switching to clocksource hpet Oct 24 19:53:42 server2 kernel: [ 0.336857] AppArmor: AppArmor Filesystem Enabled Oct 24 19:53:42 server2 kernel: [ 0.336983] pnp: PnP ACPI init Oct 24 19:53:42 server2 kernel: [ 0.337071] ACPI: bus type pnp registered Oct 24 19:53:42 server2 kernel: [ 0.337432] pnp 00:00: [bus 00-ff] Oct 24 19:53:42 server2 kernel: [ 0.337436] pnp 00:00: [io 0x0cf8-0x0cff] Oct 24 19:53:42 server2 kernel: [ 0.337441] pnp 00:00: [io 0x0000-0x0cf7 window] Oct 24 19:53:42 server2 kernel: [ 0.337445] pnp 00:00: [io 0x0d00-0xffff window] Oct 24 19:53:42 server2 kernel: [ 0.337450] pnp 00:00: [mem 0x000a0000-0x000bffff window] Oct 24 19:53:42 server2 kernel: [ 0.337454] pnp 00:00: [mem 0x000c8000-0x000dffff window] Oct 24 19:53:42 server2 kernel: [ 0.337458] pnp 00:00: [mem 0xc0000000-0xffffffff window] Oct 24 19:53:42 server2 kernel: [ 0.337462] pnp 00:00: [mem 0x00000000 window] Oct 24 19:53:42 server2 kernel: [ 0.337562] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) Oct 24 19:53:42 server2 kernel: [ 0.337630] pnp 00:01: [mem 0xe0000000-0xefffffff] Oct 24 19:53:42 server2 kernel: [ 0.337731] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.337785] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 24 19:53:42 server2 kernel: [ 0.338520] pnp 00:02: [io 0x040b] Oct 24 19:53:42 server2 kernel: [ 0.338524] pnp 00:02: [io 0x04d6] Oct 24 19:53:42 server2 kernel: [ 0.338527] pnp 00:02: [io 0x0c00-0x0c01] Oct 24 19:53:42 server2 kernel: [ 0.338530] pnp 00:02: [io 0x0c14] Oct 24 19:53:42 server2 kernel: [ 0.338533] pnp 00:02: [io 0x0c50-0x0c51] Oct 24 19:53:42 server2 kernel: [ 0.338536] pnp 00:02: [io 0x0c52] Oct 24 19:53:42 server2 kernel: [ 0.338539] pnp 00:02: [io 0x0c6c] Oct 24 19:53:42 server2 kernel: [ 0.338542] pnp 00:02: [io 0x0c6f] Oct 24 19:53:42 server2 kernel: [ 0.338549] pnp 00:02: [io 0x0cd0-0x0cd1] Oct 24 19:53:42 server2 kernel: [ 0.338552] pnp 00:02: [io 0x0cd2-0x0cd3] Oct 24 19:53:42 server2 kernel: [ 0.338556] pnp 00:02: [io 0x0cd4-0x0cd5] Oct 24 19:53:42 server2 kernel: [ 0.338559] pnp 00:02: [io 0x0cd6-0x0cd7] Oct 24 19:53:42 server2 kernel: [ 0.338562] pnp 00:02: [io 0x0cd8-0x0cdf] Oct 24 19:53:42 server2 kernel: [ 0.338565] pnp 00:02: [io 0x0800-0x089f] Oct 24 19:53:42 server2 kernel: [ 0.338569] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] Oct 24 19:53:42 server2 kernel: [ 0.338573] pnp 00:02: [io 0x0000-0x000f] Oct 24 19:53:42 server2 kernel: [ 0.338576] pnp 00:02: [io 0x0b20-0x0b3f] Oct 24 19:53:42 server2 kernel: [ 0.338579] pnp 00:02: [io 0x0900-0x090f] Oct 24 19:53:42 server2 kernel: [ 0.338582] pnp 00:02: [io 0x0910-0x091f] Oct 24 19:53:42 server2 kernel: [ 0.338585] pnp 00:02: [io 0xfe00-0xfefe] Oct 24 19:53:42 server2 kernel: [ 0.338589] pnp 00:02: [io 0x0060-0x005f disabled] Oct 24 19:53:42 server2 kernel: [ 0.338592] pnp 00:02: [io 0x0064-0x0063 disabled] Oct 24 19:53:42 server2 kernel: [ 0.338596] pnp 00:02: [mem 0xfec00000-0xfec00fff] Oct 24 19:53:42 server2 kernel: [ 0.338599] pnp 00:02: [mem 0xfee00000-0xfee00fff] Oct 24 19:53:42 server2 kernel: [ 0.338603] pnp 00:02: [mem 0xfed80000-0xfed8ffff] Oct 24 19:53:42 server2 kernel: [ 0.338606] pnp 00:02: [mem 0xfed61000-0xfed70fff] Oct 24 19:53:42 server2 kernel: [ 0.338610] pnp 00:02: [mem 0xfec10000-0xfec10fff] Oct 24 19:53:42 server2 kernel: [ 0.338613] pnp 00:02: [mem 0xfed00000-0xfed00fff] Oct 24 19:53:42 server2 kernel: [ 0.338616] pnp 00:02: [mem 0xffc00000-0xffffffff] Oct 24 19:53:42 server2 kernel: [ 0.338740] system 00:02: [io 0x040b] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.338804] system 00:02: [io 0x04d6] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.338853] system 00:02: [io 0x0c00-0x0c01] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.338901] system 00:02: [io 0x0c14] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.338949] system 00:02: [io 0x0c50-0x0c51] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.338997] system 00:02: [io 0x0c52] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339045] system 00:02: [io 0x0c6c] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339093] system 00:02: [io 0x0c6f] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339141] system 00:02: [io 0x0cd0-0x0cd1] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339189] system 00:02: [io 0x0cd2-0x0cd3] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339238] system 00:02: [io 0x0cd4-0x0cd5] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339286] system 00:02: [io 0x0cd6-0x0cd7] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339335] system 00:02: [io 0x0cd8-0x0cdf] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339383] system 00:02: [io 0x0800-0x089f] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339433] system 00:02: [io 0x0b20-0x0b3f] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339481] system 00:02: [io 0x0900-0x090f] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339530] system 00:02: [io 0x0910-0x091f] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339579] system 00:02: [io 0xfe00-0xfefe] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339629] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved Oct 24 19:53:42 server2 kernel: [ 0.339680] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339730] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339779] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339828] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339876] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339925] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.339974] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 24 19:53:42 server2 kernel: [ 0.340197] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] Oct 24 19:53:42 server2 kernel: [ 0.340201] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] Oct 24 19:53:42 server2 kernel: [ 0.340205] pnp 00:03: [io 0x0290-0x029f] Oct 24 19:53:42 server2 kernel: [ 0.340208] pnp 00:03: [io 0x0a20-0x0a2f] Oct 24 19:53:42 server2 kernel: [ 0.340298] system 00:03: [io 0x0290-0x029f] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.340346] system 00:03: [io 0x0a20-0x0a2f] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.340395] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 24 19:53:42 server2 kernel: [ 0.340651] pnp 00:04: [dma 4] Oct 24 19:53:42 server2 kernel: [ 0.340655] pnp 00:04: [io 0x0000-0x000f] Oct 24 19:53:42 server2 kernel: [ 0.340658] pnp 00:04: [io 0x0081-0x0083] Oct 24 19:53:42 server2 kernel: [ 0.340661] pnp 00:04: [io 0x0087] Oct 24 19:53:42 server2 kernel: [ 0.340664] pnp 00:04: [io 0x0089-0x008b] Oct 24 19:53:42 server2 kernel: [ 0.340667] pnp 00:04: [io 0x008f] Oct 24 19:53:42 server2 kernel: [ 0.340670] pnp 00:04: [io 0x00c0-0x00df] Oct 24 19:53:42 server2 kernel: [ 0.340718] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) Oct 24 19:53:42 server2 kernel: [ 0.340737] pnp 00:05: [io 0x0070-0x0071] Oct 24 19:53:42 server2 kernel: [ 0.340771] pnp 00:05: [irq 8] Oct 24 19:53:42 server2 kernel: [ 0.340814] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) Oct 24 19:53:42 server2 kernel: [ 0.340830] pnp 00:06: [io 0x0061] Oct 24 19:53:42 server2 kernel: [ 0.340876] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) Oct 24 19:53:42 server2 kernel: [ 0.340923] pnp 00:07: [io 0x0010-0x001f] Oct 24 19:53:42 server2 kernel: [ 0.340927] pnp 00:07: [io 0x0022-0x003f] Oct 24 19:53:42 server2 kernel: [ 0.340930] pnp 00:07: [io 0x0044-0x005f] Oct 24 19:53:42 server2 kernel: [ 0.340933] pnp 00:07: [io 0x0072-0x007f] Oct 24 19:53:42 server2 kernel: [ 0.340936] pnp 00:07: [io 0x0080] Oct 24 19:53:42 server2 kernel: [ 0.340939] pnp 00:07: [io 0x0084-0x0086] Oct 24 19:53:42 server2 kernel: [ 0.340942] pnp 00:07: [io 0x0088] Oct 24 19:53:42 server2 kernel: [ 0.340949] pnp 00:07: [io 0x008c-0x008e] Oct 24 19:53:42 server2 kernel: [ 0.340952] pnp 00:07: [io 0x0090-0x009f] Oct 24 19:53:42 server2 kernel: [ 0.340955] pnp 00:07: [io 0x00a2-0x00bf] Oct 24 19:53:42 server2 kernel: [ 0.340959] pnp 00:07: [io 0x00e0-0x00ef] Oct 24 19:53:42 server2 kernel: [ 0.340962] pnp 00:07: [io 0x04d0-0x04d1] Oct 24 19:53:42 server2 kernel: [ 0.341055] system 00:07: [io 0x04d0-0x04d1] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.341105] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 24 19:53:42 server2 kernel: [ 0.341122] pnp 00:08: [io 0x00f0-0x00ff] Oct 24 19:53:42 server2 kernel: [ 0.341132] pnp 00:08: [irq 13] Oct 24 19:53:42 server2 kernel: [ 0.341176] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) Oct 24 19:53:42 server2 kernel: [ 0.341280] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 24 19:53:42 server2 kernel: [ 0.341325] pnp 00:0a: [io 0x0060] Oct 24 19:53:42 server2 kernel: [ 0.341328] pnp 00:0a: [io 0x0064] Oct 24 19:53:42 server2 kernel: [ 0.341352] pnp 00:0a: [irq 1] Oct 24 19:53:42 server2 kernel: [ 0.341410] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) Oct 24 19:53:42 server2 kernel: [ 0.341774] pnp 00:0b: [mem 0xa8000000-0xbfffffff] Oct 24 19:53:42 server2 kernel: [ 0.341867] system 00:0b: [mem 0xa8000000-0xbfffffff] has been reserved Oct 24 19:53:42 server2 kernel: [ 0.341934] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 24 19:53:42 server2 kernel: [ 0.342199] pnp 00:0c: [mem 0xfed00000-0xfed003ff] Oct 24 19:53:42 server2 kernel: [ 0.342264] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) Oct 24 19:53:42 server2 kernel: [ 0.342276] pnp: PnP ACPI: found 13 devices Oct 24 19:53:42 server2 kernel: [ 0.342321] ACPI: ACPI bus type pnp unregistered Oct 24 19:53:42 server2 kernel: [ 0.350533] PCI: max bus depth: 2 pci_try_num: 3 Oct 24 19:53:42 server2 kernel: [ 0.350617] pci 0000:00:04.0: BAR 15: assigned [mem 0xd8100000-0xd82fffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.350695] pci 0000:01:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit] Oct 24 19:53:42 server2 kernel: [ 0.350709] pci 0000:01:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit] Oct 24 19:53:42 server2 kernel: [ 0.350722] pci 0000:01:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit] Oct 24 19:53:42 server2 kernel: [ 0.350736] pci 0000:01:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit] Oct 24 19:53:42 server2 kernel: [ 0.350741] pci 0000:01:00.0: BAR 9: can't assign mem (size 0x400000) Oct 24 19:53:42 server2 kernel: [ 0.350814] pci 0000:01:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit] Oct 24 19:53:42 server2 kernel: [ 0.350819] pci 0000:01:00.0: BAR 7: can't assign mem (size 0x40000) Oct 24 19:53:42 server2 kernel: [ 0.350869] pci 0000:00:04.0: PCI bridge to [bus 01-01] Oct 24 19:53:42 server2 kernel: [ 0.350917] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] Oct 24 19:53:42 server2 kernel: [ 0.350968] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff] Oct 24 19:53:42 server2 kernel: [ 0.351019] pci 0000:00:04.0: bridge window [mem 0xd8100000-0xd82fffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.351081] pci 0000:00:14.4: PCI bridge to [bus 02-02] Oct 24 19:53:42 server2 kernel: [ 0.351141] pci 0000:00:15.0: PCI bridge to [bus 03-03] Oct 24 19:53:42 server2 kernel: [ 0.351200] pci 0000:00:15.1: PCI bridge to [bus 04-04] Oct 24 19:53:42 server2 kernel: [ 0.351248] pci 0000:00:15.1: bridge window [io 0xd000-0xdfff] Oct 24 19:53:42 server2 kernel: [ 0.351303] pci 0000:00:15.1: bridge window [mem 0xd8000000-0xd80fffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.351367] pci 0000:05:00.0: PCI bridge to [bus 06-06] Oct 24 19:53:42 server2 kernel: [ 0.351416] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] Oct 24 19:53:42 server2 kernel: [ 0.351470] pci 0000:05:00.0: bridge window [mem 0xfe900000-0xfe9fffff] Oct 24 19:53:42 server2 kernel: [ 0.351524] pci 0000:05:00.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.351590] pci 0000:00:15.2: PCI bridge to [bus 05-06] Oct 24 19:53:42 server2 kernel: [ 0.351638] pci 0000:00:15.2: bridge window [io 0xc000-0xcfff] Oct 24 19:53:42 server2 kernel: [ 0.351690] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff] Oct 24 19:53:42 server2 kernel: [ 0.351741] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.351838] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 24 19:53:42 server2 kernel: [ 0.351890] pci 0000:00:04.0: setting latency timer to 64 Oct 24 19:53:42 server2 kernel: [ 0.351907] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 24 19:53:42 server2 kernel: [ 0.351957] pci 0000:00:15.0: setting latency timer to 64 Oct 24 19:53:42 server2 kernel: [ 0.351967] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 24 19:53:42 server2 kernel: [ 0.352036] pci 0000:00:15.1: setting latency timer to 64 Oct 24 19:53:42 server2 kernel: [ 0.352047] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 24 19:53:42 server2 kernel: [ 0.352097] pci 0000:00:15.2: setting latency timer to 64 Oct 24 19:53:42 server2 kernel: [ 0.352115] pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 0.352167] pci 0000:05:00.0: setting latency timer to 64 Oct 24 19:53:42 server2 kernel: [ 0.352174] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] Oct 24 19:53:42 server2 kernel: [ 0.352178] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] Oct 24 19:53:42 server2 kernel: [ 0.352182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] Oct 24 19:53:42 server2 kernel: [ 0.352186] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] Oct 24 19:53:42 server2 kernel: [ 0.352191] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] Oct 24 19:53:42 server2 kernel: [ 0.352195] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] Oct 24 19:53:42 server2 kernel: [ 0.352200] pci_bus 0000:01: resource 2 [mem 0xd8100000-0xd82fffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.352206] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] Oct 24 19:53:42 server2 kernel: [ 0.352210] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] Oct 24 19:53:42 server2 kernel: [ 0.352215] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] Oct 24 19:53:42 server2 kernel: [ 0.352220] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xffffffff] Oct 24 19:53:42 server2 kernel: [ 0.352225] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] Oct 24 19:53:42 server2 kernel: [ 0.352230] pci_bus 0000:04: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.352235] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] Oct 24 19:53:42 server2 kernel: [ 0.352240] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff] Oct 24 19:53:42 server2 kernel: [ 0.352245] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.352250] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] Oct 24 19:53:42 server2 kernel: [ 0.352253] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff] Oct 24 19:53:42 server2 kernel: [ 0.352258] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.352262] pci_bus 0000:06: resource 4 [io 0xc000-0xcfff] Oct 24 19:53:42 server2 kernel: [ 0.352265] pci_bus 0000:06: resource 5 [mem 0xfe900000-0xfe9fffff] Oct 24 19:53:42 server2 kernel: [ 0.352269] pci_bus 0000:06: resource 6 [mem 0xd0000000-0xd7ffffff 64bit pref] Oct 24 19:53:42 server2 kernel: [ 0.352357] NET: Registered protocol family 2 Oct 24 19:53:42 server2 kernel: [ 0.353020] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) Oct 24 19:53:42 server2 kernel: [ 0.356552] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) Oct 24 19:53:42 server2 kernel: [ 0.361545] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Oct 24 19:53:42 server2 kernel: [ 0.362166] TCP: Hash tables configured (established 524288 bind 65536) Oct 24 19:53:42 server2 kernel: [ 0.362235] TCP reno registered Oct 24 19:53:42 server2 kernel: [ 0.362327] UDP hash table entries: 8192 (order: 6, 262144 bytes) Oct 24 19:53:42 server2 kernel: [ 0.362575] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) Oct 24 19:53:42 server2 kernel: [ 0.362944] NET: Registered protocol family 1 Oct 24 19:53:42 server2 kernel: [ 0.363022] pci 0000:00:01.0: Boot video device Oct 24 19:53:42 server2 kernel: [ 0.363059] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 1.180121] pci 0000:00:12.0: PCI INT A disabled Oct 24 19:53:42 server2 kernel: [ 1.180225] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 24 19:53:42 server2 kernel: [ 1.180323] pci 0000:00:12.2: PCI INT B disabled Oct 24 19:53:42 server2 kernel: [ 1.180379] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 1.260130] pci 0000:00:13.0: PCI INT A disabled Oct 24 19:53:42 server2 kernel: [ 1.260212] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 24 19:53:42 server2 kernel: [ 1.260309] pci 0000:00:13.2: PCI INT B disabled Oct 24 19:53:42 server2 kernel: [ 1.260376] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 1.340121] pci 0000:00:14.5: PCI INT C disabled Oct 24 19:53:42 server2 kernel: [ 1.340214] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 1.412898] Freeing initrd memory: 14264k freed Oct 24 19:53:42 server2 kernel: [ 1.420136] pci 0000:00:16.0: PCI INT A disabled Oct 24 19:53:42 server2 kernel: [ 1.420224] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 24 19:53:42 server2 kernel: [ 1.420326] pci 0000:00:16.2: PCI INT B disabled Oct 24 19:53:42 server2 kernel: [ 1.420420] PCI: CLS 64 bytes, default 64 Oct 24 19:53:42 server2 kernel: [ 1.420425] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Oct 24 19:53:42 server2 kernel: [ 1.420476] Placing 64MB software IO TLB between ffff8800a3c3f000 - ffff8800a7c3f000 Oct 24 19:53:42 server2 kernel: [ 1.420534] software IO TLB at phys 0xa3c3f000 - 0xa7c3f000 Oct 24 19:53:42 server2 kernel: [ 1.420962] perf: AMD IBS detected (0x000000ff) Oct 24 19:53:42 server2 kernel: [ 1.421518] audit: initializing netlink socket (disabled) Oct 24 19:53:42 server2 kernel: [ 1.421606] type=2000 audit(1351101149.416:1): initialized Oct 24 19:53:42 server2 kernel: [ 1.461391] HugeTLB registered 2 MB page size, pre-allocated 0 pages Oct 24 19:53:42 server2 kernel: [ 1.467395] VFS: Disk quotas dquot_6.5.2 Oct 24 19:53:42 server2 kernel: [ 1.467560] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 24 19:53:42 server2 kernel: [ 1.468845] fuse init (API version 7.17) Oct 24 19:53:42 server2 kernel: [ 1.469144] msgmni has been set to 31302 Oct 24 19:53:42 server2 kernel: [ 1.470075] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Oct 24 19:53:42 server2 kernel: [ 1.470223] io scheduler noop registered Oct 24 19:53:42 server2 kernel: [ 1.470280] io scheduler deadline registered Oct 24 19:53:42 server2 kernel: [ 1.470430] io scheduler cfq registered (default) Oct 24 19:53:42 server2 kernel: [ 1.471006] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 24 19:53:42 server2 kernel: [ 1.471118] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 24 19:53:42 server2 kernel: [ 1.471433] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 Oct 24 19:53:42 server2 kernel: [ 1.471516] ACPI: Power Button [PWRB] Oct 24 19:53:42 server2 kernel: [ 1.471638] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 Oct 24 19:53:42 server2 kernel: [ 1.471713] ACPI: Power Button [PWRF] Oct 24 19:53:42 server2 kernel: [ 1.471880] ACPI: acpi_idle registered with cpuidle Oct 24 19:53:42 server2 kernel: [ 1.474105] ERST: Table is not found! Oct 24 19:53:42 server2 kernel: [ 1.474168] GHES: HEST is not enabled! Oct 24 19:53:42 server2 kernel: [ 1.474550] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Oct 24 19:53:42 server2 kernel: [ 1.577168] Linux agpgart interface v0.103 Oct 24 19:53:42 server2 kernel: [ 1.581614] brd: module loaded Oct 24 19:53:42 server2 kernel: [ 1.583278] loop: module loaded Oct 24 19:53:42 server2 kernel: [ 1.583609] ahci 0000:00:11.0: version 3.0 Oct 24 19:53:42 server2 kernel: [ 1.583668] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Oct 24 19:53:42 server2 kernel: [ 1.583932] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode Oct 24 19:53:42 server2 kernel: [ 1.583995] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part Oct 24 19:53:42 server2 kernel: [ 1.585852] scsi0 : ahci Oct 24 19:53:42 server2 kernel: [ 1.586200] scsi1 : ahci Oct 24 19:53:42 server2 kernel: [ 1.586486] scsi2 : ahci Oct 24 19:53:42 server2 kernel: [ 1.586680] scsi3 : ahci Oct 24 19:53:42 server2 kernel: [ 1.586880] scsi4 : ahci Oct 24 19:53:42 server2 kernel: [ 1.587108] scsi5 : ahci Oct 24 19:53:42 server2 kernel: [ 1.587267] ata1: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b100 irq 19 Oct 24 19:53:42 server2 kernel: [ 1.587328] ata2: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b180 irq 19 Oct 24 19:53:42 server2 kernel: [ 1.587387] ata3: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b200 irq 19 Oct 24 19:53:42 server2 kernel: [ 1.587445] ata4: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b280 irq 19 Oct 24 19:53:42 server2 kernel: [ 1.587504] ata5: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b300 irq 19 Oct 24 19:53:42 server2 kernel: [ 1.587563] ata6: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b380 irq 19 Oct 24 19:53:42 server2 kernel: [ 1.588405] Fixed MDIO Bus: probed Oct 24 19:53:42 server2 kernel: [ 1.588500] tun: Universal TUN/TAP device driver, 1.6 Oct 24 19:53:42 server2 kernel: [ 1.588547] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com Oct 24 19:53:42 server2 kernel: [ 1.588798] PPP generic driver version 2.4.2 Oct 24 19:53:42 server2 kernel: [ 1.589183] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 24 19:53:42 server2 kernel: [ 1.589285] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 24 19:53:42 server2 kernel: [ 1.589376] ehci_hcd 0000:00:12.2: EHCI Host Controller Oct 24 19:53:42 server2 kernel: [ 1.589543] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 Oct 24 19:53:42 server2 kernel: [ 1.589629] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround Oct 24 19:53:42 server2 kernel: [ 1.589735] QUIRK: Enable AMD PLL fix Oct 24 19:53:42 server2 kernel: [ 1.589768] ehci_hcd 0000:00:12.2: debug port 1 Oct 24 19:53:42 server2 kernel: [ 1.589856] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb49000 Oct 24 19:53:42 server2 kernel: [ 1.600247] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 Oct 24 19:53:42 server2 kernel: [ 1.600826] hub 1-0:1.0: USB hub found Oct 24 19:53:42 server2 kernel: [ 1.600902] hub 1-0:1.0: 5 ports detected Oct 24 19:53:42 server2 kernel: [ 1.601113] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 24 19:53:42 server2 kernel: [ 1.601205] ehci_hcd 0000:00:13.2: EHCI Host Controller Oct 24 19:53:42 server2 kernel: [ 1.601534] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 Oct 24 19:53:42 server2 kernel: [ 1.601627] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround Oct 24 19:53:42 server2 kernel: [ 1.601726] ehci_hcd 0000:00:13.2: debug port 1 Oct 24 19:53:42 server2 kernel: [ 1.601803] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb47000 Oct 24 19:53:42 server2 kernel: [ 1.612262] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 Oct 24 19:53:42 server2 kernel: [ 1.612826] hub 2-0:1.0: USB hub found Oct 24 19:53:42 server2 kernel: [ 1.612903] hub 2-0:1.0: 5 ports detected Oct 24 19:53:42 server2 kernel: [ 1.613114] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Oct 24 19:53:42 server2 kernel: [ 1.613205] ehci_hcd 0000:00:16.2: EHCI Host Controller Oct 24 19:53:42 server2 kernel: [
durandalTR
commented
12 years ago Oct 24 19:53:42 server2 kernel: [ 1.613205] ehci_hcd 0000:00:16.2: EHCI Host Controller Oct 24 19:53:42 server2 kernel: [ 1.613534] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 Oct 24 19:53:42 server2 kernel: [ 1.613628] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround Oct 24 19:53:42 server2 kernel: [ 1.613730] ehci_hcd 0000:00:16.2: debug port 1 Oct 24 19:53:42 server2 kernel: [ 1.613799] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb44000 Oct 24 19:53:42 server2 kernel: [ 1.624259] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 Oct 24 19:53:42 server2 kernel: [ 1.624819] hub 3-0:1.0: USB hub found Oct 24 19:53:42 server2 kernel: [ 1.624894] hub 3-0:1.0: 4 ports detected Oct 24 19:53:42 server2 kernel: [ 1.625087] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 24 19:53:42 server2 kernel: [ 1.625182] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 1.625277] ohci_hcd 0000:00:12.0: OHCI Host Controller Oct 24 19:53:42 server2 kernel: [ 1.625611] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 Oct 24 19:53:42 server2 kernel: [ 1.625756] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4a000 Oct 24 19:53:42 server2 kernel: [ 1.684718] hub 4-0:1.0: USB hub found Oct 24 19:53:42 server2 kernel: [ 1.684796] hub 4-0:1.0: 5 ports detected Oct 24 19:53:42 server2 kernel: [ 1.684991] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 1.685083] ohci_hcd 0000:00:13.0: OHCI Host Controller Oct 24 19:53:42 server2 kernel: [ 1.685416] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 Oct 24 19:53:42 server2 kernel: [ 1.685537] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb48000 Oct 24 19:53:42 server2 kernel: [ 1.744725] hub 5-0:1.0: USB hub found Oct 24 19:53:42 server2 kernel: [ 1.744803] hub 5-0:1.0: 5 ports detected Oct 24 19:53:42 server2 kernel: [ 1.744998] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 1.745090] ohci_hcd 0000:00:14.5: OHCI Host Controller Oct 24 19:53:42 server2 kernel: [ 1.745429] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 Oct 24 19:53:42 server2 kernel: [ 1.745551] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb46000 Oct 24 19:53:42 server2 kernel: [ 1.804732] hub 6-0:1.0: USB hub found Oct 24 19:53:42 server2 kernel: [ 1.804810] hub 6-0:1.0: 2 ports detected Oct 24 19:53:42 server2 kernel: [ 1.805002] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 1.805094] ohci_hcd 0000:00:16.0: OHCI Host Controller Oct 24 19:53:42 server2 kernel: [ 1.805421] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 Oct 24 19:53:42 server2 kernel: [ 1.805543] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb45000 Oct 24 19:53:42 server2 kernel: [ 1.864750] hub 7-0:1.0: USB hub found Oct 24 19:53:42 server2 kernel: [ 1.864828] hub 7-0:1.0: 4 ports detected Oct 24 19:53:42 server2 kernel: [ 1.865010] uhci_hcd: USB Universal Host Controller Interface driver Oct 24 19:53:42 server2 kernel: [ 1.865200] usbcore: registered new interface driver libusual Oct 24 19:53:42 server2 kernel: [ 1.865330] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 Oct 24 19:53:42 server2 kernel: [ 1.865397] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Oct 24 19:53:42 server2 kernel: [ 1.866046] serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 24 19:53:42 server2 kernel: [ 1.866675] mousedev: PS/2 mouse device common for all mice Oct 24 19:53:42 server2 kernel: [ 1.867655] rtc_cmos 00:05: RTC can wake from S4 Oct 24 19:53:42 server2 kernel: [ 1.867918] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 Oct 24 19:53:42 server2 kernel: [ 1.868050] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Oct 24 19:53:42 server2 kernel: [ 1.868246] device-mapper: uevent: version 1.0.3 Oct 24 19:53:42 server2 kernel: [ 1.868453] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com Oct 24 19:53:42 server2 kernel: [ 1.868599] cpuidle: using governor ladder Oct 24 19:53:42 server2 kernel: [ 1.868775] cpuidle: using governor menu Oct 24 19:53:42 server2 kernel: [ 1.868836] EFI Variables Facility v0.08 2004-May-17 Oct 24 19:53:42 server2 kernel: [ 1.869244] TCP cubic registered Oct 24 19:53:42 server2 kernel: [ 1.869478] NET: Registered protocol family 10 Oct 24 19:53:42 server2 kernel: [ 1.870318] NET: Registered protocol family 17 Oct 24 19:53:42 server2 kernel: [ 1.870372] Registering the dns_resolver key type Oct 24 19:53:42 server2 kernel: [ 1.870976] PM: Hibernation image not present or could not be loaded. Oct 24 19:53:42 server2 kernel: [ 1.871011] registered taskstats version 1 Oct 24 19:53:42 server2 kernel: [ 1.884592] Magic number: 0:970:896 Oct 24 19:53:42 server2 kernel: [ 1.884799] rtc_cmos 00:05: setting system clock to 2012-10-24 17:52:31 UTC (1351101151) Oct 24 19:53:42 server2 kernel: [ 1.884873] powernow-k8: Found 1 AMD E-450 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00) Oct 24 19:53:42 server2 kernel: [ 1.884992] powernow-k8: 0 : pstate 0 (1650 MHz) Oct 24 19:53:42 server2 kernel: [ 1.885054] powernow-k8: 1 : pstate 1 (1320 MHz) Oct 24 19:53:42 server2 kernel: [ 1.885100] powernow-k8: 2 : pstate 2 (825 MHz) Oct 24 19:53:42 server2 kernel: [ 1.885391] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Oct 24 19:53:42 server2 kernel: [ 1.885453] EDD information not available. Oct 24 19:53:42 server2 kernel: [ 1.888748] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 Oct 24 19:53:42 server2 kernel: [ 1.908322] ata2: SATA link down (SStatus 0 SControl 300) Oct 24 19:53:42 server2 kernel: [ 1.908424] ata6: SATA link down (SStatus 0 SControl 300) Oct 24 19:53:42 server2 kernel: [ 1.908517] ata5: SATA link down (SStatus 0 SControl 300) Oct 24 19:53:42 server2 kernel: [ 2.076275] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Oct 24 19:53:42 server2 kernel: [ 2.080073] ata1.00: HPA detected: current 488395055, native 488397168 Oct 24 19:53:42 server2 kernel: [ 2.080157] ata1.00: ATA-6: HDS722525VLSA80, V36OA63A, max UDMA/100 Oct 24 19:53:42 server2 kernel: [ 2.080209] ata1.00: 488395055 sectors, multi 16: LBA48 Oct 24 19:53:42 server2 kernel: [ 2.080292] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Oct 24 19:53:42 server2 kernel: [ 2.080302] usb 5-1: new low-speed USB device number 2 using ohci_hcd Oct 24 19:53:42 server2 kernel: [ 2.080441] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Oct 24 19:53:42 server2 kernel: [ 2.081134] ata4.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133 Oct 24 19:53:42 server2 kernel: [ 2.081208] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Oct 24 19:53:42 server2 kernel: [ 2.081292] ata3.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133 Oct 24 19:53:42 server2 kernel: [ 2.081355] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Oct 24 19:53:42 server2 kernel: [ 2.082131] ata3.00: configured for UDMA/133 Oct 24 19:53:42 server2 kernel: [ 2.082228] ata4.00: configured for UDMA/133 Oct 24 19:53:42 server2 kernel: [ 2.083830] ata1.00: configured for UDMA/100 Oct 24 19:53:42 server2 kernel: [ 2.084397] scsi 0:0:0:0: Direct-Access ATA HDS722525VLSA80 V36O PQ: 0 ANSI: 5 Oct 24 19:53:42 server2 kernel: [ 2.084772] sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB) Oct 24 19:53:42 server2 kernel: [ 2.084833] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 24 19:53:42 server2 kernel: [ 2.085109] sd 0:0:0:0: [sda] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 2.085160] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 24 19:53:42 server2 kernel: [ 2.085218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 24 19:53:42 server2 kernel: [ 2.085246] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5 Oct 24 19:53:42 server2 kernel: [ 2.085583] sd 2:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Oct 24 19:53:42 server2 kernel: [ 2.085667] sd 2:0:0:0: [sdb] 4096-byte physical blocks Oct 24 19:53:42 server2 kernel: [ 2.085758] sd 2:0:0:0: Attached scsi generic sg1 type 0 Oct 24 19:53:42 server2 kernel: [ 2.085955] sd 2:0:0:0: [sdb] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 2.086019] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Oct 24 19:53:42 server2 kernel: [ 2.086047] scsi 3:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5 Oct 24 19:53:42 server2 kernel: [ 2.086067] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 24 19:53:42 server2 kernel: [ 2.086427] sd 3:0:0:0: Attached scsi generic sg2 type 0 Oct 24 19:53:42 server2 kernel: [ 2.086640] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Oct 24 19:53:42 server2 kernel: [ 2.086708] sd 3:0:0:0: [sdc] 4096-byte physical blocks Oct 24 19:53:42 server2 kernel: [ 2.086862] sd 3:0:0:0: [sdc] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 2.086914] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Oct 24 19:53:42 server2 kernel: [ 2.086987] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 24 19:53:42 server2 kernel: [ 2.115531] sda: sda1 sda2 sda3 sda4 Oct 24 19:53:42 server2 kernel: [ 2.117075] sd 0:0:0:0: [sda] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 2.147421] sdc: sdc1 sdc9 Oct 24 19:53:42 server2 kernel: [ 2.148948] sd 3:0:0:0: [sdc] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 2.152999] sdb: sdb1 sdb9 Oct 24 19:53:42 server2 kernel: [ 2.154143] sd 2:0:0:0: [sdb] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 2.157067] Freeing unused kernel memory: 924k freed Oct 24 19:53:42 server2 kernel: [ 2.157643] Write protecting the kernel read-only data: 12288k Oct 24 19:53:42 server2 kernel: [ 2.167950] Freeing unused kernel memory: 1612k freed Oct 24 19:53:42 server2 kernel: [ 2.176379] Freeing unused kernel memory: 1200k freed Oct 24 19:53:42 server2 kernel: [ 2.230585] md: linear personality registered for level -1 Oct 24 19:53:42 server2 kernel: [ 2.239995] md: multipath personality registered for level -4 Oct 24 19:53:42 server2 kernel: [ 2.243029] md: raid0 personality registered for level 0 Oct 24 19:53:42 server2 kernel: [ 2.246432] md: raid1 personality registered for level 1 Oct 24 19:53:42 server2 kernel: [ 2.254595] async_tx: api initialized (async) Oct 24 19:53:42 server2 kernel: [ 2.320074] raid6: int64x1 599 MB/s Oct 24 19:53:42 server2 kernel: [ 2.388029] raid6: int64x2 879 MB/s Oct 24 19:53:42 server2 kernel: [ 2.456050] raid6: int64x4 754 MB/s Oct 24 19:53:42 server2 kernel: [ 2.509964] mpt2sas version 10.100.00.00 loaded Oct 24 19:53:42 server2 kernel: [ 2.524100] raid6: int64x8 794 MB/s Oct 24 19:53:42 server2 kernel: [ 2.547156] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded Oct 24 19:53:42 server2 kernel: [ 2.547480] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Oct 24 19:53:42 server2 kernel: [ 2.547662] r8169 0000:04:00.0: setting latency timer to 64 Oct 24 19:53:42 server2 kernel: [ 2.547778] r8169 0000:04:00.0: irq 40 for MSI/MSI-X Oct 24 19:53:42 server2 kernel: [ 2.548802] r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xffffc9000187e000, 54:04:a6:cc:b0:50, XID 0c200000 IRQ 40 Oct 24 19:53:42 server2 kernel: [ 2.548870] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] Oct 24 19:53:42 server2 kernel: [ 2.555607] scsi6 : Fusion MPT SAS Host Oct 24 19:53:42 server2 kernel: [ 2.559671] mpt2sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 24 19:53:42 server2 kernel: [ 2.559818] mpt2sas 0000:01:00.0: setting latency timer to 64 Oct 24 19:53:42 server2 kernel: [ 2.559831] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16030420 kB) Oct 24 19:53:42 server2 kernel: [ 2.560935] mpt2sas 0000:01:00.0: irq 41 for MSI/MSI-X Oct 24 19:53:42 server2 kernel: [ 2.560979] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 41 Oct 24 19:53:42 server2 kernel: [ 2.561048] mpt2sas0: iomem(0x00000000feac0000), mapped(0xffffc900125c8000), size(16384) Oct 24 19:53:42 server2 kernel: [ 2.561107] mpt2sas0: ioport(0x000000000000e000), size(256) Oct 24 19:53:42 server2 kernel: [ 2.592080] raid6: sse2x1 1043 MB/s Oct 24 19:53:42 server2 kernel: [ 2.660051] raid6: sse2x2 1500 MB/s Oct 24 19:53:42 server2 kernel: [ 2.664131] md: bindOct 24 19:53:42 server2 kernel: [ 2.695433] bio: create slab at 1 Oct 24 19:53:42 server2 kernel: [ 2.700099] md/raid1:md0: active with 1 out of 2 mirrors Oct 24 19:53:42 server2 kernel: [ 2.700238] md0: detected capacity change from 0 to 29981802496 Oct 24 19:53:42 server2 kernel: [ 2.725607] input: Microsoft Microsoft USB Wireless Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input3 Oct 24 19:53:42 server2 kernel: [ 2.726135] generic-usb 0003:045E:00B9.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:13.0-1/input0 Oct 24 19:53:42 server2 kernel: [ 2.726622] usbcore: registered new interface driver usbhid Oct 24 19:53:42 server2 kernel: [ 2.726688] usbhid: USB HID core driver Oct 24 19:53:42 server2 kernel: [ 2.728049] raid6: sse2x4 2223 MB/s Oct 24 19:53:42 server2 kernel: [ 2.728095] raid6: using algorithm sse2x4 (2223 MB/s) Oct 24 19:53:42 server2 kernel: [ 2.728162] Refined TSC clocksource calibration: 1649.981 MHz. Oct 24 19:53:42 server2 kernel: [ 2.728216] Switching to clocksource tsc Oct 24 19:53:42 server2 kernel: [ 2.729107] xor: automatically using best checksumming function: generic_sse Oct 24 19:53:42 server2 kernel: [ 2.748010] generic_sse: 3335.000 MB/sec Oct 24 19:53:42 server2 kernel: [ 2.748073] xor: using function: generic_sse (3335.000 MB/sec) Oct 24 19:53:42 server2 kernel: [ 2.749652] md: raid6 personality registered for level 6 Oct 24 19:53:42 server2 kernel: [ 2.749724] md: raid5 personality registered for level 5 Oct 24 19:53:42 server2 kernel: [ 2.749771] md: raid4 personality registered for level 4 Oct 24 19:53:42 server2 kernel: [ 2.760181] md: raid10 personality registered for level 10 Oct 24 19:53:42 server2 kernel: [ 2.763595] md0: unknown partition table Oct 24 19:53:42 server2 kernel: [ 2.852269] mpt2sas0: sending message unit reset !! Oct 24 19:53:42 server2 kernel: [ 2.860260] mpt2sas0: message unit reset: SUCCESS Oct 24 19:53:42 server2 kernel: [ 3.029473] mpt2sas0: Allocated physical memory: size(7418 kB) Oct 24 19:53:42 server2 kernel: [ 3.029547] mpt2sas0: Current Controller Queue Depth(3307), Max Controller Queue Depth(3432) Oct 24 19:53:42 server2 kernel: [ 3.029605] mpt2sas0: Scatter Gather Elements per IO(128) Oct 24 19:53:42 server2 kernel: [ 3.260856] mpt2sas0: LSISAS2008: FWVersion(14.00.00.00), ChipRevision(0x03), BiosVersion(07.27.00.00) Oct 24 19:53:42 server2 kernel: [ 3.260978] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) Oct 24 19:53:42 server2 kernel: [ 3.261777] mpt2sas0: sending port enable !! Oct 24 19:53:42 server2 kernel: [ 3.266196] mpt2sas0: host_add: handle(0x0001), sas_addr(0x500605b003e715d0), phys(8) Oct 24 19:53:42 server2 kernel: [ 3.276243] mpt2sas0: port enable: SUCCESS Oct 24 19:53:42 server2 kernel: [ 3.278937] scsi 6:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 6 Oct 24 19:53:42 server2 kernel: [ 3.279031] scsi 6:0:0:0: SATA: handle(0x000c), sas_addr(0x4433221103000000), phy(3), device_name(0x50014ee058aed511) Oct 24 19:53:42 server2 kernel: [ 3.279094] scsi 6:0:0:0: SATA: enclosure_logical_id(0x500605b003e715d0), slot(0) Oct 24 19:53:42 server2 kernel: [ 3.279290] scsi 6:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Oct 24 19:53:42 server2 kernel: [ 3.279402] scsi 6:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) Oct 24 19:53:42 server2 kernel: [ 3.281502] scsi 6:0:1:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 6 Oct 24 19:53:42 server2 kernel: [ 3.281626] scsi 6:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x50014ee058ae52ba) Oct 24 19:53:42 server2 kernel: [ 3.281689] scsi 6:0:1:0: SATA: enclosure_logical_id(0x500605b003e715d0), slot(3) Oct 24 19:53:42 server2 kernel: [ 3.281881] scsi 6:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Oct 24 19:53:42 server2 kernel: [ 3.282011] scsi 6:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) Oct 24 19:53:42 server2 kernel: [ 3.283664] scsi 6:0:2:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 6 Oct 24 19:53:42 server2 kernel: [ 3.283760] scsi 6:0:2:0: SATA: handle(0x000a), sas_addr(0x4433221101000000), phy(1), device_name(0x50014ee058ae7885) Oct 24 19:53:42 server2 kernel: [ 3.283824] scsi 6:0:2:0: SATA: enclosure_logical_id(0x500605b003e715d0), slot(2) Oct 24 19:53:42 server2 kernel: [ 3.284100] scsi 6:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Oct 24 19:53:42 server2 kernel: [ 3.284226] scsi 6:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) Oct 24 19:53:42 server2 kernel: [ 3.285781] scsi 6:0:3:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 6 Oct 24 19:53:42 server2 kernel: [ 3.285872] scsi 6:0:3:0: SATA: handle(0x000b), sas_addr(0x4433221102000000), phy(2), device_name(0x50014ee0ae045753) Oct 24 19:53:42 server2 kernel: [ 3.285935] scsi 6:0:3:0: SATA: enclosure_logical_id(0x500605b003e715d0), slot(1) Oct 24 19:53:42 server2 kernel: [ 3.286092] scsi 6:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Oct 24 19:53:42 server2 kernel: [ 3.286177] scsi 6:0:3:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) Oct 24 19:53:42 server2 kernel: [ 3.287826] scsi 6:0:4:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 6 Oct 24 19:53:42 server2 kernel: [ 3.287903] scsi 6:0:4:0: SATA: handle(0x000d), sas_addr(0x4433221104000000), phy(4), device_name(0x50014ee602ce3edd) Oct 24 19:53:42 server2 kernel: [ 3.287967] scsi 6:0:4:0: SATA: enclosure_logical_id(0x500605b003e715d0), slot(7) Oct 24 19:53:42 server2 kernel: [ 3.288171] scsi 6:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Oct 24 19:53:42 server2 kernel: [ 3.288258] scsi 6:0:4:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) Oct 24 19:53:42 server2 kernel: [ 3.289811] scsi 6:0:5:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 6 Oct 24 19:53:42 server2 kernel: [ 3.289892] scsi 6:0:5:0: SATA: handle(0x000e), sas_addr(0x4433221105000000), phy(5), device_name(0x50014ee658238e9a) Oct 24 19:53:42 server2 kernel: [ 3.289954] scsi 6:0:5:0: SATA: enclosure_logical_id(0x500605b003e715d0), slot(6) Oct 24 19:53:42 server2 kernel: [ 3.290133] scsi 6:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Oct 24 19:53:42 server2 kernel: [ 3.290207] scsi 6:0:5:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) Oct 24 19:53:42 server2 kernel: [ 3.291727] scsi 6:0:6:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 6 Oct 24 19:53:42 server2 kernel: [ 3.291817] scsi 6:0:6:0: SATA: handle(0x000f), sas_addr(0x4433221106000000), phy(6), device_name(0x50014ee602cdf335) Oct 24 19:53:42 server2 kernel: [ 3.291882] scsi 6:0:6:0: SATA: enclosure_logical_id(0x500605b003e715d0), slot(5) Oct 24 19:53:42 server2 kernel: [ 3.292057] scsi 6:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Oct 24 19:53:42 server2 kernel: [ 3.292160] scsi 6:0:6:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) Oct 24 19:53:42 server2 kernel: [ 3.293894] scsi 6:0:7:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 6 Oct 24 19:53:42 server2 kernel: [ 3.293992] scsi 6:0:7:0: SATA: handle(0x0010), sas_addr(0x4433221107000000), phy(7), device_name(0x50014ee602ce57f8) Oct 24 19:53:42 server2 kernel: [ 3.294054] scsi 6:0:7:0: SATA: enclosure_logical_id(0x500605b003e715d0), slot(4) Oct 24 19:53:42 server2 kernel: [ 3.294217] scsi 6:0:7:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Oct 24 19:53:42 server2 kernel: [ 3.294304] scsi 6:0:7:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) Oct 24 19:53:42 server2 kernel: [ 3.295477] sd 6:0:0:0: Attached scsi generic sg3 type 0 Oct 24 19:53:42 server2 kernel: [ 3.295859] sd 6:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Oct 24 19:53:42 server2 kernel: [ 3.295941] sd 6:0:0:0: [sdd] 4096-byte physical blocks Oct 24 19:53:42 server2 kernel: [ 3.296090] sd 6:0:1:0: Attached scsi generic sg4 type 0 Oct 24 19:53:42 server2 kernel: [ 3.296458] sd 6:0:2:0: Attached scsi generic sg5 type 0 Oct 24 19:53:42 server2 kernel: [ 3.296467] sd 6:0:1:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Oct 24 19:53:42 server2 kernel: [ 3.296471] sd 6:0:1:0: [sde] 4096-byte physical blocks Oct 24 19:53:42 server2 kernel: [ 3.296906] sd 6:0:2:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Oct 24 19:53:42 server2 kernel: [ 3.296981] sd 6:0:2:0: [sdf] 4096-byte physical blocks Oct 24 19:53:42 server2 kernel: [ 3.297099] sd 6:0:3:0: Attached scsi generic sg6 type 0 Oct 24 19:53:42 server2 kernel: [ 3.297354] sd 6:0:3:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Oct 24 19:53:42 server2 kernel: [ 3.297457] sd 6:0:3:0: [sdg] 4096-byte physical blocks Oct 24 19:53:42 server2 kernel: [ 3.297676] sd 6:0:4:0: Attached scsi generic sg7 type 0 Oct 24 19:53:42 server2 kernel: [ 3.298042] sd 6:0:5:0: Attached scsi generic sg8 type 0 Oct 24 19:53:42 server2 kernel: [ 3.298069] sd 6:0:4:0: [sdh] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Oct 24 19:53:42 server2 kernel: [ 3.298073] sd 6:0:4:0: [sdh] 4096-byte physical blocks Oct 24 19:53:42 server2 kernel: [ 3.298466] sd 6:0:5:0: [sdi] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Oct 24 19:53:42 server2 kernel: [ 3.298559] sd 6:0:5:0: [sdi] 4096-byte physical blocks Oct 24 19:53:42 server2 kernel: [ 3.298674] sd 6:0:6:0: Attached scsi generic sg9 type 0 Oct 24 19:53:42 server2 kernel: [ 3.298981] sd 6:0:6:0: [sdj] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Oct 24 19:53:42 server2 kernel: [ 3.299068] sd 6:0:6:0: [sdj] 4096-byte physical blocks Oct 24 19:53:42 server2 kernel: [ 3.299154] sd 6:0:7:0: Attached scsi generic sg10 type 0 Oct 24 19:53:42 server2 kernel: [ 3.300155] sd 6:0:7:0: [sdk] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) Oct 24 19:53:42 server2 kernel: [ 3.301306] sd 6:0:7:0: [sdk] 4096-byte physical blocks Oct 24 19:53:42 server2 kernel: [ 3.301442] sd 6:0:0:0: [sdd] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 3.301506] sd 6:0:0:0: [sdd] Mode Sense: 7f 00 10 08 Oct 24 19:53:42 server2 kernel: [ 3.301691] sd 6:0:1:0: [sde] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 3.301769] sd 6:0:1:0: [sde] Mode Sense: 7f 00 10 08 Oct 24 19:53:42 server2 kernel: [ 3.302396] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA Oct 24 19:53:42 server2 kernel: [ 3.303149] sd 6:0:2:0: [sdf] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 3.303216] sd 6:0:2:0: [sdf] Mode Sense: 7f 00 10 08 Oct 24 19:53:42 server2 kernel: [ 3.303411] sd 6:0:4:0: [sdh] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 3.303485] sd 6:0:4:0: [sdh] Mode Sense: 7f 00 10 08 Oct 24 19:53:42 server2 kernel: [ 3.303502] sd 6:0:1:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA Oct 24 19:53:42 server2 kernel: [ 3.303664] sd 6:0:3:0: [sdg] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 3.303737] sd 6:0:3:0: [sdg] Mode Sense: 7f 00 10 08 Oct 24 19:53:42 server2 kernel: [ 3.304186] sd 6:0:2:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA Oct 24 19:53:42 server2 kernel: [ 3.304376] sd 6:0:4:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA Oct 24 19:53:42 server2 kernel: [ 3.304683] sd 6:0:5:0: [sdi] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 3.304759] sd 6:0:5:0: [sdi] Mode Sense: 7f 00 10 08 Oct 24 19:53:42 server2 kernel: [ 3.304776] sd 6:0:3:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA Oct 24 19:53:42 server2 kernel: [ 3.305039] sd 6:0:6:0: [sdj] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 3.305111] sd 6:0:6:0: [sdj] Mode Sense: 7f 00 10 08 Oct 24 19:53:42 server2 kernel: [ 3.305601] sd 6:0:5:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA Oct 24 19:53:42 server2 kernel: [ 3.306437] sd 6:0:6:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA Oct 24 19:53:42 server2 kernel: [ 3.307262] sd 6:0:7:0: [sdk] Write Protect is off Oct 24 19:53:42 server2 kernel: [ 3.307316] sd 6:0:7:0: [sdk] Mode Sense: 7f 00 10 08 Oct 24 19:53:42 server2 kernel: [ 3.308163] sd 6:0:7:0: [sdk] Write cache: enabled, read cache: enabled, supports DPO and FUA Oct 24 19:53:42 server2 kernel: [ 3.312524] sdd: sdd1 sdd9 Oct 24 19:53:42 server2 kernel: [ 3.313282] sde: sde1 sde9 Oct 24 19:53:42 server2 kernel: [ 3.313705] sdh: sdh1 sdh9 Oct 24 19:53:42 server2 kernel: [ 3.314884] sdg: sdg1 sdg9 Oct 24 19:53:42 server2 kernel: [ 3.315165] sdf: sdf1 sdf9 Oct 24 19:53:42 server2 kernel: [ 3.316860] sdi: sdi1 sdi9 Oct 24 19:53:42 server2 kernel: [ 3.317550] sdj: sdj1 sdj9 Oct 24 19:53:42 server2 kernel: [ 3.318597] sdk: sdk1 sdk9 Oct 24 19:53:42 server2 kernel: [ 3.324908] sd 6:0:4:0: [sdh] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 3.324998] sd 6:0:5:0: [sdi] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 3.325141] sd 6:0:0:0: [sdd] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 3.325621] sd 6:0:3:0: [sdg] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 3.325877] sd 6:0:1:0: [sde] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 3.325996] sd 6:0:2:0: [sdf] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 3.326468] sd 6:0:6:0: [sdj] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 3.326721] sd 6:0:7:0: [sdk] Attached SCSI disk Oct 24 19:53:42 server2 kernel: [ 3.423101] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) Oct 24 19:53:42 server2 kernel: [ 71.556563] SPL: Loaded module v0.6.0.80-rc11 Oct 24 19:53:42 server2 kernel: [ 71.557298] zunicode: module license 'CDDL' taints kernel. Oct 24 19:53:42 server2 kernel: [ 71.557362] Disabling lock debugging due to kernel taint Oct 24 19:53:42 server2 kernel: [ 71.712412] SPL: using hostid 0x007f0101 Oct 24 19:53:42 server2 kernel: [ 71.714362] ZFS: Loaded module v0.6.0.80-rc11, ZFS pool version 28, ZFS filesystem version 5 Oct 24 19:53:42 server2 kernel: [ 71.850146] ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 24 19:53:42 server2 kernel: [ 71.917572] Adding 11718652k swap on /dev/sda2. Priority:-1 extents:1 across:11718652k Oct 24 19:53:42 server2 kernel: [ 71.930676] lp: driver loaded but no devices found Oct 24 19:53:42 server2 kernel: [ 72.055724] wmi: Mapper loaded Oct 24 19:53:42 server2 kernel: [ 72.085014] [drm] Initialized drm 1.1.0 20060810 Oct 24 19:53:42 server2 kernel: [ 72.109687] [drm] radeon defaulting to kernel modesetting. Oct 24 19:53:42 server2 kernel: [ 72.109694] [drm] radeon kernel modesetting enabled. Oct 24 19:53:42 server2 kernel: [ 72.109776] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 72.109785] radeon 0000:00:01.0: setting latency timer to 64 Oct 24 19:53:42 server2 kernel: [ 72.110291] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1043:0x84E7). Oct 24 19:53:42 server2 kernel: [ 72.110382] [drm] register mmio base: 0xFEB00000 Oct 24 19:53:42 server2 kernel: [ 72.110385] [drm] register mmio size: 262144 Oct 24 19:53:42 server2 kernel: [ 72.110550] ATOM BIOS: AMD Oct 24 19:53:42 server2 kernel: [ 72.110605] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) Oct 24 19:53:42 server2 kernel: [ 72.110611] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF Oct 24 19:53:42 server2 kernel: [ 72.110861] [drm] Detected VRAM RAM=384M, BAR=256M Oct 24 19:53:42 server2 kernel: [ 72.110868] [drm] RAM width 32bits DDR Oct 24 19:53:42 server2 kernel: [ 72.111061] [TTM] Zone kernel: Available graphics memory: 8015210 kiB. Oct 24 19:53:42 server2 kernel: [ 72.111065] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. Oct 24 19:53:42 server2 kernel: [ 72.111068] [TTM] Initializing pool allocator. Oct 24 19:53:42 server2 kernel: [ 72.111126] [drm] radeon: 384M of VRAM memory ready Oct 24 19:53:42 server2 kernel: [ 72.111130] [drm] radeon: 512M of GTT memory ready. Oct 24 19:53:42 server2 kernel: [ 72.111157] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Oct 24 19:53:42 server2 kernel: [ 72.111161] [drm] Driver supports precise vblank timestamp query. Oct 24 19:53:42 server2 kernel: [ 72.111224] radeon 0000:00:01.0: irq 42 for MSI/MSI-X Oct 24 19:53:42 server2 kernel: [ 72.111232] radeon 0000:00:01.0: radeon: using MSI. Oct 24 19:53:42 server2 kernel: [ 72.111281] [drm] radeon: irq initialized. Oct 24 19:53:42 server2 kernel: [ 72.111290] [drm] GART: num cpu pages 131072, num gpu pages 131072 Oct 24 19:53:42 server2 kernel: [ 72.118927] [drm] Loading PALM Microcode Oct 24 19:53:42 server2 kernel: [ 72.237494] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro Oct 24 19:53:42 server2 kernel: [ 72.768515] Linux video capture interface: v2.00 Oct 24 19:53:42 server2 kernel: [ 72.775715] type=1400 audit(1351101222.383:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=864 comm="apparmor_parser" Oct 24 19:53:42 server2 kernel: [ 72.777908] type=1400 audit(1351101222.387:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser" Oct 24 19:53:42 server2 kernel: [ 72.778296] type=1400 audit(1351101222.387:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser" Oct 24 19:53:42 server2 kernel: [ 72.855658] ivtv: Start initialization, version 1.4.3 Oct 24 19:53:42 server2 kernel: [ 72.855776] ivtv0: Initializing card 0 Oct 24 19:53:42 server2 kernel: [ 72.855782] ivtv0: Autodetected Hauppauge card (cx23416 based) Oct 24 19:53:42 server2 kernel: [ 72.883447] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) Oct 24 19:53:42 server2 kernel: [ 72.943269] ivtv 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Oct 24 19:53:42 server2 kernel: [ 72.945143] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) Oct 24 19:53:42 server2 kernel: [ 73.014702] tveeprom 0-0050: Hauppauge model 26559, rev B257, serial# 7516393 Oct 24 19:53:42 server2 kernel: [ 73.014710] tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) Oct 24 19:53:42 server2 kernel: [ 73.014716] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) Oct 24 19:53:42 server2 kernel: [ 73.014721] tveeprom 0-0050: audio processor is CX25843 (idx 37) Oct 24 19:53:42 server2 kernel: [ 73.014725] tveeprom 0-0050: decoder processor is CX25843 (idx 30) Oct 24 19:53:42 server2 kernel: [ 73.014729] tveeprom 0-0050: has radio Oct 24 19:53:42 server2 kernel: [ 73.014733] ivtv0: Autodetected Hauppauge WinTV PVR-150 Oct 24 19:53:42 server2 kernel: [ 73.030104] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) Oct 24 19:53:42 server2 kernel: [ 73.350664] i2c-core: driver [tuner] using legacy suspend method Oct 24 19:53:42 server2 kernel: [ 73.350671] i2c-core: driver [tuner] using legacy resume method Oct 24 19:53:43 server2 kernel: [ 73.463077] tuner 0-0061: Tuner -1 found with type(s) Radio TV. Oct 24 19:53:43 server2 kernel: [ 73.476375] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) Oct 24 19:53:43 server2 kernel: [ 73.522654] tuner-simple 0-0061: creating new instance Oct 24 19:53:43 server2 kernel: [ 73.522663] tuner-simple 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Oct 24 19:53:43 server2 kernel: [ 73.554897] ivtv0: Registered device video0 for encoder MPG (4096 kB) Oct 24 19:53:43 server2 kernel: [ 73.554968] ivtv0: Registered device video32 for encoder YUV (2048 kB) Oct 24 19:53:43 server2 kernel: [ 73.555031] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) Oct 24 19:53:43 server2 kernel: [ 73.555094] ivtv0: Registered device video24 for encoder PCM (320 kB) Oct 24 19:53:43 server2 kernel: [ 73.555157] ivtv0: Registered device radio0 for encoder radio Oct 24 19:53:43 server2 kernel: [ 73.555161] ivtv0: Initialized card: Hauppauge WinTV PVR-150 Oct 24 19:53:43 server2 kernel: [ 73.555254] ivtv1: Initializing card 1 Oct 24 19:53:43 server2 kernel: [ 73.555260] ivtv1: Autodetected Hauppauge card (cx23416 based) Oct 24 19:53:43 server2 kernel: [ 73.560969] ivtv 0000:06:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Oct 24 19:53:43 server2 kernel: [ 73.560988] ivtv1: Unreasonably low latency timer, setting to 64 (was 32) Oct 24 19:53:43 server2 kernel: [ 73.621707] tveeprom 1-0050: Hauppauge model 26559, rev B257, serial# 7548556 Oct 24 19:53:43 server2 kernel: [ 73.621714] tveeprom 1-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) Oct 24 19:53:43 server2 kernel: [ 73.621720] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) Oct 24 19:53:43 server2 kernel: [ 73.621725] tveeprom 1-0050: audio processor is CX25843 (idx 37) Oct 24 19:53:43 server2 kernel: [ 73.621729] tveeprom 1-0050: decoder processor is CX25843 (idx 30) Oct 24 19:53:43 server2 kernel: [ 73.621733] tveeprom 1-0050: has radio Oct 24 19:53:43 server2 kernel: [ 73.621736] ivtv1: Autodetected Hauppauge WinTV PVR-150 Oct 24 19:53:43 server2 kernel: [ 73.637958] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) Oct 24 19:53:43 server2 kernel: [ 73.658667] asus_wmi: ASUS WMI generic driver loaded Oct 24 19:53:43 server2 kernel: [ 73.664313] asus_wmi: Initialization: 0x0 Oct 24 19:53:43 server2 kernel: [ 73.664389] asus_wmi: BIOS WMI version: 0.9 Oct 24 19:53:43 server2 kernel: [ 73.669194] asus_wmi: SFUN value: 0x0 Oct 24 19:53:43 server2 kernel: [ 73.669860] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4 Oct 24 19:53:43 server2 kernel: [ 73.738084] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). Oct 24 19:53:43 server2 kernel: [ 73.738307] radeon 0000:00:01.0: WB enabled Oct 24 19:53:43 server2 kernel: [ 73.756331] [drm] ring test succeeded in 0 usecs Oct 24 19:53:43 server2 kernel: [ 73.756546] [drm] radeon: ib pool ready. Oct 24 19:53:43 server2 kernel: [ 73.756670] [drm] ib test succeeded in 0 usecs Oct 24 19:53:43 server2 kernel: [ 73.771700] [drm] Radeon Display Connectors Oct 24 19:53:43 server2 kernel: [ 73.771708] [drm] Connector 0: Oct 24 19:53:43 server2 kernel: [ 73.771711] [drm] HDMI-A Oct 24 19:53:43 server2 kernel: [ 73.771714] [drm] HPD1 Oct 24 19:53:43 server2 kernel: [ 73.771718] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c Oct 24 19:53:43 server2 kernel: [ 73.771721] [drm] Encoders: Oct 24 19:53:43 server2 kernel: [ 73.771724] [drm] DFP1: INTERNAL_UNIPHY Oct 24 19:53:43 server2 kernel: [ 73.771727] [drm] Connector 1: Oct 24 19:53:43 server2 kernel: [ 73.771729] [drm] DVI-D Oct 24 19:53:43 server2 kernel: [ 73.771731] [drm] HPD2 Oct 24 19:53:43 server2 kernel: [ 73.771735] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c Oct 24 19:53:43 server2 kernel: [ 73.771738] [drm] Encoders: Oct 24 19:53:43 server2 kernel: [ 73.771740] [drm] DFP2: INTERNAL_UNIPHY Oct 24 19:53:43 server2 kernel: [ 73.771743] [drm] Connector 2: Oct 24 19:53:43 server2 kernel: [ 73.771745] [drm] VGA Oct 24 19:53:43 server2 kernel: [ 73.771748] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 Oct 24 19:53:43 server2 kernel: [ 73.771751] [drm] Encoders: Oct 24 19:53:43 server2 kernel: [ 73.771753] [drm] CRT1: INTERNAL_KLDSCP_DAC1 Oct 24 19:53:43 server2 kernel: [ 73.771853] [drm] Internal thermal controller without fan control Oct 24 19:53:43 server2 kernel: [ 73.776644] [drm] radeon: power management initialized Oct 24 19:53:43 server2 kernel: [ 73.815742] r8169 0000:04:00.0: eth0: link down Oct 24 19:53:43 server2 kernel: [ 73.815761] r8169 0000:04:00.0: eth0: link down Oct 24 19:53:43 server2 kernel: [ 73.819040] ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 24 19:53:43 server2 kernel: [ 73.924608] tda9887 1-0043: creating new instance Oct 24 19:53:43 server2 kernel: [ 73.924615] tda9887 1-0043: tda988[5/6/7] found Oct 24 19:53:43 server2 kernel: [ 73.930448] tuner 1-0043: Tuner 74 found with type(s) Radio TV. Oct 24 19:53:43 server2 kernel: [ 73.943353] tuner 1-0061: Tuner -1 found with type(s) Radio TV. Oct 24 19:53:43 server2 kernel: [ 73.955616] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) Oct 24 19:53:43 server2 kernel: [ 73.967357] [drm] fb mappable at 0xC0142000 Oct 24 19:53:43 server2 kernel: [ 73.967363] [drm] vram apper at 0xC0000000 Oct 24 19:53:43 server2 kernel: [ 73.967366] [drm] size 5242880 Oct 24 19:53:43 server2 kernel: [ 73.967369] [drm] fb depth is 24 Oct 24 19:53:43 server2 kernel: [ 73.967371] [drm] pitch is 5120 Oct 24 19:53:43 server2 kernel: [ 73.967764] fbcon: radeondrmfb (fb0) is primary device Oct 24 19:53:43 server2 kernel: [ 73.973407] tuner-simple 1-0061: creating new instance Oct 24 19:53:43 server2 kernel: [ 73.973413] tuner-simple 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) Oct 24 19:53:43 server2 kernel: [ 73.981844] ivtv1: Registered device video1 for encoder MPG (4096 kB) Oct 24 19:53:43 server2 kernel: [ 73.982154] ivtv1: Registered device video33 for encoder YUV (2048 kB) Oct 24 19:53:43 server2 kernel: [ 73.982593] ivtv1: Registered device vbi1 for encoder VBI (1024 kB) Oct 24 19:53:43 server2 kernel: [ 73.982994] ivtv1: Registered device video25 for encoder PCM (320 kB) Oct 24 19:53:43 server2 kernel: [ 73.983410] ivtv1: Registered device radio1 for encoder radio Oct 24 19:53:43 server2 kernel: [ 73.983417] ivtv1: Initialized card: Hauppauge WinTV PVR-150 Oct 24 19:53:43 server2 kernel: [ 73.983598] ivtv: End initialization Oct 24 19:53:43 server2 kernel: [ 74.019591] Console: switching to colour frame buffer device 160x64 Oct 24 19:53:43 server2 kernel: [ 74.026622] fb0: radeondrmfb frame buffer device Oct 24 19:53:43 server2 kernel: [ 74.026625] drm: registered panic notifier Oct 24 19:53:43 server2 kernel: [ 74.026639] [drm] Initialized radeon 2.12.0 20080528 for 0000:00:01.0 on minor 0 Oct 24 19:53:43 server2 kernel: [ 74.026806] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Oct 24 19:53:43 server2 kernel: [ 74.027059] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X Oct 24 19:53:43 server2 kernel: [ 74.027104] snd_hda_intel 0000:00:01.1: setting latency timer to 64 Oct 24 19:53:43 server2 kernel: [ 74.056442] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 Oct 24 19:53:43 server2 kernel: [ 74.056602] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5 Oct 24 19:53:43 server2 kernel: [ 74.057887] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 Oct 24 19:53:43 server2 kernel: [ 74.067900] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 Oct 24 19:53:43 server2 kernel: [ 74.068949] SP5100 TCO timer: mmio address 0xbafe00 already in use Oct 24 19:53:44 server2 kernel: [ 74.628291] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) Oct 24 19:53:44 server2 kernel: [ 74.736482] ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) Oct 24 19:53:44 server2 kernel: [ 74.828554] ivtv0: Encoder revision: 0x02060039 Oct 24 19:53:44 server2 kernel: [ 74.940344] ivtv1: Encoder revision: 0x02060039 Oct 24 19:53:46 server2 kernel: [ 76.725326] r8169 0000:04:00.0: eth0: link up Oct 24 19:53:46 server2 kernel: [ 76.743542] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Oct 24 19:53:48 server2 kernel: [ 78.730763] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) Oct 24 19:53:48 server2 kernel: [ 78.780193] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) Oct 24 19:53:48 server2 kernel: [ 78.913926] init: failsafe main process (1304) killed by TERM signal Oct 24 19:53:48 server2 kernel: [ 79.059813] type=1400 audit(1351101228.667:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1545 comm="apparmor_parser" Oct 24 19:53:48 server2 kernel: [ 79.068098] type=1400 audit(1351101228.679:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1544 comm="apparmor_parser" Oct 24 19:53:48 server2 kernel: [ 79.070351] type=1400 audit(1351101228.679:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1544 comm="apparmor_parser" Oct 24 19:53:48 server2 kernel: [ 79.070832] type=1400 audit(1351101228.679:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1544 comm="apparmor_parser" Oct 24 19:53:48 server2 kernel: [ 79.076668] type=1400 audit(1351101228.687:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1547 comm="apparmor_parser" Oct 24 19:53:48 server2 kernel: [ 79.287826] type=1400 audit(1351101228.895:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1617 comm="apparmor_parser" Oct 24 19:53:50 server2 kernel: [ 81.136517] postgres (1679): /proc/1679/oom_adj is deprecated, please use /proc/1679/oom_score_adj instead. Oct 24 19:53:56 server2 kernel: [ 87.488043] eth0: no IPv6 routers present Oct 24 20:18:11 server2 kernel: [ 1542.928520] init: plymouth-log main process (3381) terminated with status 1
Thank you for your effords.
--end report--
I have 4 HDDs in IBM M1015 card, I migrate from FREENAS to UBUNTU, so i mange to have the pool import at boot but won't be able to mount at boot. I have tried to set /etc/default/zfs ZFS_MOUNT='y' but still not working.
Is there anyway to let my pool mount at boot?
thank you