search

ophub / amlogic-s9xxx-armbian

Support for Armbian in Amlogic, Rockchip and Allwinner boxes. Support a311d, s922x, s905x3, s905x2, s912, s905d, s905x, s905w, s905, s905l, rk3588, rk3568, rk3399, rk3328, h6, etc.
GNU General Public License v2.0
5.41k stars 1.72k forks source link

Install packages using APT, got older version; Request support for MXQ Pro 4K #1140

Closed Choomai closed 1 year ago

Choomai commented 1 year ago

Device Information

Armbian Version

Describe the bug I have tried sudo apt update but it still report to me that nginx is the lastest version 1.18.0. Installed using X96W/FunTV model (can't find MXQ so I choose the most relevant spec, also can you add support for my model ?). Installing in Termux I got version 1.23.3 image Screenshot_20230307-120408

ophub commented 1 year ago

The apt upgrade depends on the management of the upstream ubuntu/debian arm64 software package, which is not controlled.

There is no test feedback for your device at present. You can send a picture of the appearance of your box and the picture of the bottom (including the device model code). If it is convenient to disassemble, share the front and back photos of the motherboard. Pat the soc logo on the motherboard.

cat /boot/uEnv.txt
ls -l /boot/u-boot*
Choomai commented 1 year ago

Oh that's true, when installing Ubuntu using proot-distro I also got version 1.18.0

Here is the image you asked me (about the heatsink, I can't really take it off, I need to use a lot of force to pull it out, and it may ripoff the chip too 🥴 so sorry about that) IMG_20230308_130044 IMG_20230308_130223 IMG_20230308_130028

Here is the output of these 2 commands cat /boot/uEnv.txt and ls -l /boot/u-boot* image

ophub commented 1 year ago

Ok thanks for sharing. This is the same configuration as 119, and I will add it to the support list option tomorrow.

6ell commented 11 months ago

There is another one MXQ Pro 4K. It has Rockchip RK3228A. I don't know if it supports Armbian, cause when i tried to boot holding reset button, it just gave me no signal.

Choomai commented 11 months ago

Did you plug the USB cable to your PC when holding the reset button ? Also, what type of USB cable did you use ? A to A (it killed my usb port, bruh) ?

6ell commented 11 months ago

I tried to use image on usb flash drive, but I've learned that I had to use SD without holding the button. So, neither.