ophub
commented
1 year ago 错误是上游armbian最近更新炸了，和你的修改无关。有一周不能编译了，等修复吧。
Closed God-JohnDiamond closed 1 year ago
ophub
commented
1 year ago 错误是上游armbian最近更新炸了，和你的修改无关。有一周不能编译了，等修复吧。
God-JohnDiamond
commented
1 year ago TE: 61572
BL2 Built : 13:36:55, Jun 22 2020. gxl g85d6ad1 - longyong.chen@droid02-sz
Board ID = 4, adc=301 set vcck to 1070 mv set vddee to 1070 mv CARD_3 high, old board CPU clk: 1200MHz
DDR3 chl: Rank0+1 @ 792MHz - FAIL DDR3 chl: Rank0 @ 792MHz bist_test rank: 0 21 01 41 37 16 59 1f 00 3f 38 17 59 22 01 44 37 16 59 22 00 45 38 13 5d 612 - PASS
Rank0: 2048MB(auto)-2T-11
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x00007600
Load bl301 from eMMC, src: 0x00018200, des: 0x01380000, size: 0x00002400
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019600
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x0007b000
NOTICE: BL3-1: v1.0(debug):361f8a7
NOTICE: BL3-1: Built : 16:43:26, Dec 19 2018
NOTICE: BL31: GXL normal boot!
NOTICE: BL31: BL33 decompress pass
[Image: gxl_v1.1.3103-9234004 2018-12-27 10:43:23 yao.zhang@droid07]
efuse init ops = c5
efuse init hdcp = c, cf9=7
x2_hp_e = 0
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: 0 0 3 c c 0 14 b3 78 a0 0 c5 not ES chip
[0.614099 Inits done]
INFO: BL3-1: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader
ERROR: Error initializing runtime service opteed_fast
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x1000000
INFO: BL3-1: Next image spsr = 0x3c9
DRAM:
MMC: In: Out: Err: wipe_data=successfulSecd
wipe_cache=successful
store init flag
store read name addr off|partition size
read 'size' bytes starting at offset 'off'
to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
write 'size' bytes starting at offset 'off'
to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
write uboot to the boot device
store erase boot/data:
erase the area which is uboot or data
store erase partition
upgrade_step=2 [BL31]: tee size: 0 rebootmode=cold_boot
Starting the controller () () [BL31]: tee size: 0 [BL31]: tee size: 0 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.18-flippy-82+ (root@vm25) (Ubuntu clang version 14.0.0-1ubuntu1, Ubuntu LLD 14.0.0) #50 SMP Sat Mar 11 22:59:20 CST 2023 [ 0.000000] Machine model: Amlogic Meson GXL (S905L2) X7 5G Tv Box [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000006b400000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 19 pages/cpu s37992 r8192 d31640 u77824 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: root=UUID=b67dd11d-7c3d-49de-a922-96ceeb464adf rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_ena8 [ 0.000000] The swapaccount= commandline option is deprecated. Please report your usecase to linux-mm@kvack.org if you depend on this functionality. [ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=ee:14:da:ac:d7:98", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1705040K/2097152K available (17024K kernel code, 2908K rwdata, 7728K rodata, 2240K init, 888K bss, 129968K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000567] Console: colour dummy device 80x25 [ 0.000869] printk: console [tty0] enabled [ 0.000925] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000946] pid_max: default: 32768 minimum: 301 [ 0.001139] LSM: Security Framework initializing [ 0.001250] SELinux: Initializing. [ 0.001510] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001533] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.003241] cblist_init_generic: Setting adjustable number of callback queues. [ 0.003280] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003430] rcu: Hierarchical SRCU implementation. [ 0.003443] rcu: Max phase no-delay instances is 1000. [ 0.004774] EFI services will not be available. [ 0.005174] smp: Bringing up secondary CPUs ... [ 0.005714] Detected VIPT I-cache on CPU1 [ 0.005856] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.006470] Detected VIPT I-cache on CPU2 [ 0.006594] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.007167] Detected VIPT I-cache on CPU3 [ 0.007283] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.007355] smp: Brought up 1 node, 4 CPUs [ 0.007414] SMP: Total of 4 processors activated. [ 0.007424] CPU features: detected: 32-bit EL0 Support [ 0.007433] CPU features: detected: 32-bit EL1 Support [ 0.007443] CPU features: detected: CRC32 instructions [ 0.007507] CPU: All CPU(s) started at EL2 [ 0.007524] alternatives: applying system-wide alternatives [ 0.009995] devtmpfs: initialized [ 0.017232] Registered cp15_barrier emulation handler [ 0.017270] Registered setend emulation handler [ 0.017430] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.017461] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.023836] prandom: seed boundary self test passed [ 0.025062] prandom: 100 self tests passed [ 0.025118] pinctrl core: initialized pinctrl subsystem [ 0.025647] DMI not present or invalid. [ 0.026071] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.027249] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.027785] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.028114] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.028196] audit: initializing netlink subsys (disabled) [ 0.028453] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1 [ 0.029555] thermal_sys: Registered thermal governor 'step_wise' [ 0.029638] cpuidle: using governor ladder [ 0.029857] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.029965] ASID allocator initialised with 65536 entries [ 0.030123] Serial: AMBA PL011 UART driver [ 0.040938] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000 [ 0.043831] platform d0100000.vpu: Fixed dependency cycle(s) with /cvbs-connector [ 0.044073] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /hdmi-connector [ 0.052595] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.052627] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.052640] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.052649] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.052660] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052669] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.052680] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.052689] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.053651] cryptd: max_cpu_qlen set to 1000 [ 0.121466] raid6: neonx8 gen() 2292 MB/s [ 0.189532] raid6: neonx4 gen() 2273 MB/s [ 0.257605] raid6: neonx2 gen() 2118 MB/s [ 0.325667] raid6: neonx1 gen() 1719 MB/s [ 0.393729] raid6: int64x8 gen() 1502 MB/s [ 0.461801] raid6: int64x4 gen() 1620 MB/s [ 0.529867] raid6: int64x2 gen() 1384 MB/s [ 0.597943] raid6: int64x1 gen() 1162 MB/s [ 0.597953] raid6: using algorithm neonx8 gen() 2292 MB/s [ 0.665977] raid6: .... xor() 1684 MB/s, rmw enabled [ 0.665987] raid6: using neon recovery algorithm [ 0.666253] fbcon: Taking over console [ 0.666295] ACPI: Interpreter disabled. [ 0.668149] iommu: Default domain type: Translated [ 0.668180] iommu: DMA domain TLB invalidation policy: strict mode [ 0.668649] SCSI subsystem initialized [ 0.669155] usbcore: registered new interface driver usbfs [ 0.669201] usbcore: registered new interface driver hub [ 0.669238] usbcore: registered new device driver usb [ 0.669710] mc: Linux media interface: v0.10 [ 0.669740] videodev: Linux video capture interface: v2.00 [ 0.669933] EDAC MC: Ver: 3.0.0 [ 0.671069] Advanced Linux Sound Architecture Driver Initialized. [ 0.671962] vgaarb: loaded [ 0.672436] clocksource: Switched to clocksource arch_sys_counter [ 0.672756] VFS: Disk quotas dquot_6.6.0 [ 0.672817] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.672959] FS-Cache: Loaded [ 0.673155] pnp: PnP ACPI: disabled [ 0.679539] NET: Registered PF_INET protocol family [ 0.679747] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.681396] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.681449] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.681482] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.681670] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.682121] TCP: Hash tables configured (established 16384 bind 16384) [ 0.682418] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) [ 0.682524] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.682576] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.682750] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.682782] NET: Registered PF_XDP protocol family [ 0.682802] PCI: CLS 0 bytes, default 64 [ 0.683305] Trying to unpack rootfs image as initramfs... [ 0.692732] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.693374] kvm [1]: IPA Size Limit: 40 bits [ 0.696064] kvm [1]: vgic interrupt IRQ9 [ 0.696213] kvm [1]: Hyp mode initialized successfully [ 0.698361] Initialise system trusted keyrings [ 0.698664] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.705077] zbud: loaded [ 0.706843] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.707391] fuse: init (API version 7.37) [ 0.708101] SGI XFS with ACLs, security attributes, quota, no debug enabled [ 0.747995] NET: Registered PF_ALG protocol family [ 0.748091] xor: measuring software checksum speed [ 0.751381] 8regs : 3022 MB/sec [ 0.754567] 32regs : 3148 MB/sec [ 0.758416] arm64_neon : 2589 MB/sec [ 0.758442] xor: using function: 32regs (3148 MB/sec) [ 0.758463] Key type asymmetric registered [ 0.758483] Asymmetric key parser 'x509' registered [ 0.758615] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.758828] io scheduler mq-deadline registered [ 0.758845] io scheduler kyber registered [ 0.759026] io scheduler bfq registered [ 0.803633] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.822742] soc soc0: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2) Detected [ 0.825410] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 0.827711] Serial: AMBA driver [ 0.828211] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 18, base_baud = 1500000) is a meson_uart [ 1.322968] Freeing initrd memory: 8260K [ 1.325792] printk: console [ttyAML0] enabled [ 1.863181] brd: module loaded [ 1.867585] loop: module loaded [ 1.874409] usbcore: registered new interface driver cdc_wdm [ 1.874499] usbcore: registered new interface driver usb-storage [ 1.880548] usbcore: registered new interface driver usbserial_generic [ 1.886917] usbserial: USB Serial support registered for generic [ 1.892854] usbcore: registered new interface driver ch341 [ 1.898276] usbserial: USB Serial support registered for ch341-uart [ 1.904494] usbcore: registered new interface driver cp210x [ 1.910005] usbserial: USB Serial support registered for cp210x [ 1.915878] usbcore: registered new interface driver ftdi_sio [ 1.921574] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.928818] usbcore: registered new interface driver garmin_gps [ 1.934673] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 1.941589] usbcore: registered new interface driver ipw [ 1.946835] usbserial: USB Serial support registered for IPWireless converter [ 1.953917] usbcore: registered new interface driver opticon [ 1.959514] usbserial: USB Serial support registered for opticon [ 1.965472] usbcore: registered new interface driver pl2303 [ 1.970984] usbserial: USB Serial support registered for pl2303 [ 1.976867] usbcore: registered new interface driver qcaux [ 1.982283] usbserial: USB Serial support registered for qcaux [ 1.988071] usbcore: registered new interface driver qcserial [ 1.993771] usbserial: USB Serial support registered for Qualcomm USB modem [ 2.000664] usbcore: registered new interface driver symbolserial [ 2.006693] usbserial: USB Serial support registered for symbol [ 2.013170] mousedev: PS/2 mouse device common for all mice [ 2.019070] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi [ 2.025365] meson-vrtc c81000a8.rtc: registered as rtc0 [ 2.029738] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2) [ 2.038233] i2c_dev: i2c /dev entries driver [ 2.043740] Registered IR keymap rc-cec [ 2.045897] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0 [ 2.054097] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input0 [ 2.065550] sdhci: Secure Digital Host Controller Interface driver [ 2.068810] sdhci: Copyright(c) Pierre Ossman [ 2.073093] Synopsys Designware Multimedia Card Interface Driver [ 2.079934] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.080530] meson-gx-mmc d0072000.mmc: Got CD GPIO [ 2.081026] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 2.094955] ledtrig-cpu: registered to indicate activity on CPUs [ 2.102093] meson-sm: secure-monitor enabled [ 2.106586] gxl-crypto c883e000.crypto: will run requests pump with realtime priority [ 2.113026] gxl-crypto c883e000.crypto: will run requests pump with realtime priority [ 2.121044] hid: raw HID events driver (C) Jiri Kosina [ 2.125844] usbcore: registered new interface driver usbhid [ 2.131227] usbhid: USB HID core driver [ 2.135733] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [BL31]: tee size: 0 [ 2.151681] Initializing XFRM netlink socket [ 2.152245] NET: Registered PF_INET6 protocol family [ 2.193347] Segment Routing with IPv6 [ 2.193395] RPL Segment Routing with IPv6 [ 2.195440] In-situ OAM (IOAM) with IPv6 [ 2.199433] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.208047] bpfilter: Loaded bpfilter_umh pid 97 [ 2.209802] NET: Registered PF_PACKET protocol family [ 2.214748] NET: Registered PF_KEY protocol family [ 2.219621] 8021q: 802.1Q VLAN Support v1.8 [ 2.224097] registered taskstats version 1 [ 2.227696] Loading compiled-in X.509 certificates [ 2.236658] mmc2: tuning execution failed: -5 [ 2.236720] mmc2: error -5 whilst initialising MMC card [ 2.237629] zswap: loaded using pool zstd/zbud [ 2.246852] Key type .fscrypt registered [ 2.250162] Key type fscrypt-provisioning registered [ 2.256204] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 2.482136] alg: No test for 842 (842-scomp) [ 2.482302] alg: No test for 842 (842-generic) [ 3.238495] meson-drm d0100000.vpu: Queued 2 outputs on vpu [ 3.268507] meson-dw-hdmi c883a000.hdmi-tx: Unsupported HDMI controller (0d0d:0d:0d) [ 3.270938] meson-drm d0100000.vpu: failed to bind c883a000.hdmi-tx (ops meson_dw_hdmi_ops): -19 [ 3.279354] meson-drm d0100000.vpu: Couldn't bind all components [ 3.285543] meson-drm d0100000.vpu: adev bind failed: -19 [ 3.292804] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 3.297210] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 3.303441] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 3.310109] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 3.316371] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 3.321522] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 3.328936] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 3.336352] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 3.341528] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 3.348518] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 3.354897] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 3.360761] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 3.366540] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 3.377407] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 [ 3.379646] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 [ 3.909452] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 3.911134] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 3.918372] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 3.926847] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.930707] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 3.938185] xhci-hcd xhci-hcd.1.auto: USB3 root hub has no ports [ 3.944005] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 3.953359] xhci-hcd xhci-hcd.1.auto: irq 32, io mem 0xc9000000 [ 3.959470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.967376] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.974534] usb usb1: Product: xHCI Host Controller [ 3.979362] usb usb1: Manufacturer: Linux 6.1.18-flippy-82+ xhci-hcd [ 3.985659] usb usb1: SerialNumber: xhci-hcd.1.auto [ 3.991014] hub 1-0:1.0: USB hub found [ 3.994230] hub 1-0:1.0: 2 ports detected [ 4.001775] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq [ 4.002456] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware get_dvfs_info 0004 [ 4.039603] ALSA device list: [ 4.039647] No soundcards found. [ 4.041155] Freeing unused kernel memory: 2240K [ 4.056579] Run /init as init process [ 4.077140] mmc0: new ultra high speed SDR104 SDIO card at address 8800
God-JohnDiamond
commented
1 year ago [ 213.612581] usb 1-2: new high-speed USB device number 2 using xhci-hcd [ 213.761337] usb 1-2: New USB device found, idVendor=ffee, idProduct=0100, bcdDevice= 1.00 [ 213.764098] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 213.776654] usb-storage 1-2:1.0: USB Mass Storage device detected [ 213.777757] scsi host0: usb-storage 1-2:1.0 [ 214.789881] scsi 0:0:0:0: Direct-Access FNK TECH 1.30 PQ: 0 ANSI: 2 [ 214.795139] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 214.800301] sd 0:0:0:0: [sda] Write Protect is off [ 214.804961] sd 0:0:0:0: [sda] No Caching mode page found [ 214.809957] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 214.828743] sda: sda1 sda2 [ 214.829403] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 226.216608] random: crng init done
直接用meson-gxl-s905l3b-m302a.dtb这个写入了emmc 然后启动到这里就卡住了，串口不能输入，但是往设备上插拔U盘还是有反应
ophub
commented
1 year ago 同步最新源码，切换官方源到main就可以了，原来的master官方已经弃更了
Standard chat template, no routine, no chat. 标准聊天模板，无套路不聊天。
Device Information | 设备信息
Armbian Version | 系统版本
Describe the bug | 问题描述 fork 后编译出错 貌似是内核部分出错了？地址尝试换过 也是一样的错误
下面是设置以及修改过的地方
修改过这几个repo地址