Support for Armbian in Amlogic, Rockchip and Allwinner boxes. Support a311d, s922x, s905x3, s905x2, s912, s905d, s905x, s905w, s905, s905l, rk3588, rk3568, rk3399, rk3328, h6, etc.
[ 6.037544] hub 2-0:1.0: USB hub found
[ 6.040792] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
错误1:
[ 9.033090] sd 0:0:0:0: [sda] No Caching mode page found
[ 9.038224] sd 0:0:0:0: [sda] Assuming drive cache: write through
错误2:
[ 11.427801] systemd[410]: /usr/lib/systemd/system-generators/netplan failed with exit status 1.
错误3:
[ 12.164863] systemd[1]: systemd-networkd.socket: Socket service systemd-networkd.service not loaded, refusing.
[ 12.164890] systemd[1]: Failed to listen on Network Service Netlink Socket.
错误4:
[ 13.807579] Bluetooth: ECDH test passed in 23126 usecs
[ 13.808410] debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
[ 13.818817] Bluetooth: SMP test passed in 5272 usecs
[ 13.824722] debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
错误5:
[ 14.531114] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
错误6:
[ 14.805021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 14.858356] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
所有开机信息：
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.123-ophub (root@fv-az218-705) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24)) 12.2.1 20221205, GNU ld (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24)) 2.39.0.20221210) #1 SMP PREEMPT Thu Jul 27 10:33:04 EDT 2023
[ 0.000000] Machine model: Phicomm N1
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000062c00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x0000000077ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 19 pages/cpu s37784 r8192 d31848 u77824
[ 0.000000] pcpu-alloc: s37784 r8192 d31848 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483840
[ 0.000000] Kernel command line: root=UUID=01e99242-44b2-4c6f-a2bd-fc4d05813e12 rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 max_loop=128 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=XX:XX:XX:XX:XX:XX
[ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=XX:XX:XX:XX:XX:XX", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1571204K/1966080K available (15232K kernel code, 2728K rwdata, 4836K rodata, 3776K init, 891K bss, 132732K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000591] Console: colour dummy device 80x25
[ 0.000970] printk: console [tty0] enabled
[ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.001032] pid_max: default: 32768 minimum: 301
[ 0.001241] LSM: Security Framework initializing
[ 0.001354] SELinux: Initializing.
[ 0.001625] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001650] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.003800] rcu: Hierarchical SRCU implementation.
[ 0.005130] EFI services will not be available.
[ 0.005556] smp: Bringing up secondary CPUs ...
[ 0.006220] Detected VIPT I-cache on CPU1
[ 0.006280] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007024] Detected VIPT I-cache on CPU2
[ 0.007077] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007759] Detected VIPT I-cache on CPU3
[ 0.007806] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.007893] smp: Brought up 1 node, 4 CPUs
[ 0.007959] SMP: Total of 4 processors activated.
[ 0.007970] CPU features: detected: 32-bit EL0 Support
[ 0.007980] CPU features: detected: 32-bit EL1 Support
[ 0.007991] CPU features: detected: CRC32 instructions
[ 0.008665] CPU: All CPU(s) started at EL2
[ 0.008693] alternatives: patching kernel code
[ 0.009992] devtmpfs: initialized
[ 0.018272] Registered cp15_barrier emulation handler
[ 0.018321] Registered setend emulation handler
[ 0.018480] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.018509] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.024787] prandom: seed boundary self test passed
[ 0.026298] prandom: 100 self tests passed
[ 0.049235] prandom32: self test passed (less than 6 bits correlated)
[ 0.049286] pinctrl core: initialized pinctrl subsystem
[ 0.049899] DMI not present or invalid.
[ 0.050434] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.052422] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.052633] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.052818] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.052909] audit: initializing netlink subsys (disabled)
[ 0.053145] audit: type=2000 audit(0.049:1): state=initialized audit_enabled=0 res=1
[ 0.054256] thermal_sys: Registered thermal governor 'step_wise'
[ 0.054541] cpuidle: using governor ladder
[ 0.054752] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.054864] ASID allocator initialised with 65536 entries
[ 0.055038] Serial: AMBA PL011 UART driver
[ 0.073241] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu
[ 0.077562] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx
[ 0.087497] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.087532] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.087544] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.087557] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.584380] cryptd: max_cpu_qlen set to 1000
[ 1.588019] "cryptomgr_test" (91) uses obsolete ecb(arc4) skcipher
[ 1.599752] alg: No test for 842 (842-generic)
[ 1.599891] alg: No test for 842 (842-scomp)
[ 1.694440] DRBG: Continuing without Jitter RNG
[ 1.786413] raid6: neonx8 gen() 2215 MB/s
[ 1.843149] raid6: neonx8 xor() 1602 MB/s
[ 1.899884] raid6: neonx4 gen() 2173 MB/s
[ 1.956620] raid6: neonx4 xor() 1526 MB/s
[ 2.013357] raid6: neonx2 gen() 2066 MB/s
[ 2.070080] raid6: neonx2 xor() 1413 MB/s
[ 2.126814] raid6: neonx1 gen() 1776 MB/s
[ 2.183535] raid6: neonx1 xor() 1209 MB/s
[ 2.240265] raid6: int64x8 gen() 1414 MB/s
[ 2.297000] raid6: int64x8 xor() 740 MB/s
[ 2.353737] raid6: int64x4 gen() 1570 MB/s
[ 2.410452] raid6: int64x4 xor() 810 MB/s
[ 2.467190] raid6: int64x2 gen() 1399 MB/s
[ 2.523911] raid6: int64x2 xor() 748 MB/s
[ 2.580649] raid6: int64x1 gen() 1037 MB/s
[ 2.637360] raid6: int64x1 xor() 517 MB/s
[ 2.637371] raid6: using algorithm neonx8 gen() 2215 MB/s
[ 2.637382] raid6: .... xor() 1602 MB/s, rmw enabled
[ 2.637392] raid6: using neon recovery algorithm
[ 2.637606] fbcon: Taking over console
[ 2.637644] ACPI: Interpreter disabled.
[ 2.639907] mali: supplied by VCC_12V
[ 2.640398] iommu: Default domain type: Translated
[ 2.640420] iommu: DMA domain TLB invalidation policy: strict mode
[ 2.640801] vgaarb: loaded
[ 2.641324] SCSI subsystem initialized
[ 2.641558] usbcore: registered new interface driver usbfs
[ 2.641604] usbcore: registered new interface driver hub
[ 2.641647] usbcore: registered new device driver usb
[ 2.642148] mc: Linux media interface: v0.10
[ 2.642181] videodev: Linux video capture interface: v2.00
[ 2.642443] EDAC MC: Ver: 3.0.0
[ 2.643522] Advanced Linux Sound Architecture Driver Initialized.
[ 2.644689] clocksource: Switched to clocksource arch_sys_counter
[ 2.645039] VFS: Disk quotas dquot_6.6.0
[ 2.645121] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.645292] FS-Cache: Loaded
[ 2.645812] pnp: PnP ACPI: disabled
[ 2.652483] NET: Registered PF_INET protocol family
[ 2.652685] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 2.653924] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 2.653980] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 2.654053] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.654173] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 2.654395] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.654670] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 2.654805] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.654857] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.655053] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.655088] NET: Registered PF_XDP protocol family
[ 2.655109] PCI: CLS 0 bytes, default 64
[ 2.655392] Trying to unpack rootfs image as initramfs...
[ 2.662147] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.662692] kvm [1]: IPA Size Limit: 40 bits
[ 2.663603] kvm [1]: vgic interrupt IRQ9
[ 2.663762] kvm [1]: Hyp mode initialized successfully
[ 3.377422] Freeing initrd memory: 16456K
[ 3.634934] Initialise system trusted keyrings
[ 3.635185] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 3.641826] zbud: loaded
[ 3.643461] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.644020] fuse: init (API version 7.34)
[ 3.644531] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 3.684572] NET: Registered PF_ALG protocol family
[ 3.738278] xor: measuring software checksum speed
[ 3.742472] 8regs : 2365 MB/sec
[ 3.746004] 32regs : 2802 MB/sec
[ 3.750796] arm64_neon : 2064 MB/sec
[ 3.750807] xor: using function: 32regs (2802 MB/sec)
[ 3.750823] Key type asymmetric registered
[ 3.750834] Asymmetric key parser 'x509' registered
[ 3.750961] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 3.751155] io scheduler mq-deadline registered
[ 3.751170] io scheduler kyber registered
[ 3.751336] io scheduler bfq registered
[ 3.776977] soc soc0: Amlogic Meson GXL (S905D) Revision 21:d (4:2) Detected
[ 3.779448] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 3.781536] Serial: AMBA driver
[ 3.781978] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 20, base_baud = 1500000) is a meson_uart
[ 3.782179] serial serial0: tty port ttyAML6 registered
[ 3.782697] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 23, base_baud = 1500000) is a meson_uart
[ 4.824503] printk: console [ttyAML0] enabled
[ 4.838218] brd: module loaded
[ 4.903768] loop: module loaded
[ 4.910906] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.911867] ehci-pci: EHCI PCI platform driver
[ 4.916280] ehci-platform: EHCI generic platform driver
[ 4.922017] usbcore: registered new interface driver cdc_wdm
[ 4.927062] usbcore: registered new interface driver usb-storage
[ 4.933492] mousedev: PS/2 mouse device common for all mice
[ 4.938962] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
[ 4.947852] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi
[ 4.953649] meson-vrtc c81000a8.rtc: registered as rtc0
[ 4.957989] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
[ 4.966530] i2c_dev: i2c /dev entries driver
[ 4.972577] Registered IR keymap rc-cec
[ 4.974127] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0
[ 4.982366] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input1
[ 4.994507] sdhci: Secure Digital Host Controller Interface driver
[ 4.997054] sdhci: Copyright(c) Pierre Ossman
[ 5.001349] Synopsys Designware Multimedia Card Interface Driver
[ 5.008202] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.008833] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 5.015902] meson-sm: secure-monitor enabled
[ 5.024775] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 5.030550] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 5.041799] hid: raw HID events driver (C) Jiri Kosina
[ 5.043401] usbcore: registered new interface driver usbhid
[ 5.048940] usbhid: USB HID core driver
[ 5.053077] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 5.067142] Initializing XFRM netlink socket
[ 5.067969] NET: Registered PF_INET6 protocol family
[ 5.114041] Segment Routing with IPv6
[ 5.114084] RPL Segment Routing with IPv6
[ 5.116305] In-situ OAM (IOAM) with IPv6
[ 5.120301] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.127298] NET: Registered PF_PACKET protocol family
[ 5.130861] NET: Registered PF_KEY protocol family
[ 5.135725] 8021q: 802.1Q VLAN Support v1.8
[ 5.140483] registered taskstats version 1
[ 5.143925] Loading compiled-in X.509 certificates
[ 5.151431] zswap: loaded using pool zstd/zbud
[ 5.153901] Key type .fscrypt registered
[ 5.153908] mmc2: new HS200 MMC card at address 0001
[ 5.154940] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB
[ 5.156799] Key type fscrypt-provisioning registered
[ 5.172013] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB
[ 5.172452] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 5.177701] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB
[ 5.188712] mmcblk2rpmb: mmc2:0001 8GTF4R 512 KiB, chardev (240:0)
[ 5.212077] meson-drm d0100000.vpu: Queued 2 outputs on vpu
[ 5.213721] meson-drm d0100000.vpu: CVBS Output connector not available
[ 5.244769] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 5.249474] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 5.257495] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops 0xffffffc00a0cfdb8)
[ 5.264989] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
[ 5.866751] Console: switching to colour frame buffer device 240x67
[ 5.907085] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 5.916688] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 5.920734] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 5.927047] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 5.933789] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 5.939876] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 5.945038] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 5.952454] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 5.959870] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 5.965046] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 5.972032] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 5.978420] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 5.984280] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 5.990058] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 6.001055] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 6.003204] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 6.535992] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 6.537804] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 6.545009] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 6.553806] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 6.557379] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[ 6.564875] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 6.574093] xhci-hcd xhci-hcd.3.auto: irq 49, io mem 0xc9000000
[ 6.580140] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 6.585512] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
[ 6.592933] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[ 6.599539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 6.607585] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.614742] usb usb1: Product: xHCI Host Controller
[ 6.619597] usb usb1: Manufacturer: Linux 5.15.123-ophub xhci-hcd
[ 6.625614] usb usb1: SerialNumber: xhci-hcd.3.auto
[ 6.630942] hub 1-0:1.0: USB hub found
[ 6.634181] hub 1-0:1.0: 2 ports detected
[ 6.638571] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.646246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 6.654332] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.661594] usb usb2: Product: xHCI Host Controller
[ 6.666320] usb usb2: Manufacturer: Linux 5.15.123-ophub xhci-hcd
[ 6.672357] usb usb2: SerialNumber: xhci-hcd.3.auto
[ 6.677677] hub 2-0:1.0: USB hub found
[ 6.680942] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 6.691451] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[ 6.691840] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[ 6.783864] mmc0: new ultra high speed SDR50 SDIO card at address 0001
[ 6.888225] usb 1-1: new low-speed USB device number 2 using xhci-hcd
[ 6.959504] ALSA device list:
[ 6.985331] No soundcards found.
[ 6.992672] Freeing unused kernel memory: 3776K
[ 6.997306] Run /init as init process
[ 7.001806] with arguments:
[ 7.001811] /init
[ 7.001814] with environment:
[ 7.001818] HOME=/
[ 7.001821] TERM=linux
[ 7.001825] cgroup_enable=memory
[ 7.001828] cgroup_memory=1
[ 7.001831] mac=XX:XX:XX:XX:XX:XX
[ 7.096905] usb 1-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[ 7.104165] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.111224] usb 1-1: Product: USB Keyboard
[ 7.116765] usb 1-1: Manufacturer: Logitech
[ 7.502703] input: Logitech USB Keyboard as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-1/1-1:1.0/0003:046D:C31C.0001/input/input2
[ 7.572211] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-xhci-hcd.3.auto-1/input0
[ 7.594097] input: Logitech USB Keyboard Consumer Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input3
[ 7.665154] input: Logitech USB Keyboard System Control as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.3.auto/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input4
[ 7.680621] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-xhci-hcd.3.auto-1/input1
[ 7.814648] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
[ 7.814725] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[ 7.850638] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
[ 7.859244] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
[ 7.865776] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
[ 7.872161] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
[ 7.880524] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
[ 7.891888] lima d00c0000.gpu: bus rate = 166666667
[ 7.896932] lima d00c0000.gpu: mod rate = 24000000
[ 7.903847] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1
[ 7.968825] usb 1-2: New USB device found, idVendor=14cd, idProduct=1212, bcdDevice= 1.00
[ 7.977404] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 7.984920] usb 1-2: Product: Mass Storage Device
[ 7.989943] usb 1-2: Manufacturer: Generic
[ 7.994954] usb 1-2: SerialNumber: 121220160204
[ 8.000976] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 8.007025] scsi host0: usb-storage 1-2:1.0
[ 9.017354] scsi 0:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS
[ 9.022447] sd 0:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 9.028340] sd 0:0:0:0: [sda] Write Protect is off
[ 9.032812] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 9.033090] sd 0:0:0:0: [sda] No Caching mode page found
[ 9.038224] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.048398] sda: sda1 sda2
[ 9.050921] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 9.423304] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback. Quota mode: none.
[ 10.558940] systemd[1]: System time before build time, advancing clock.
[ 10.740459] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 10.761471] systemd[1]: Detected architecture arm64.
[ 10.779953] systemd[1]: Set hostname to <armbian>.
[ 11.427801] systemd[410]: /usr/lib/systemd/system-generators/netplan failed with exit status 1.
[ 11.806774] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 12.019743] systemd[1]: Queued start job for default target Graphical Interface.
[ 12.023325] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.031604] systemd[1]: Created slice system-getty.slice.
[ 12.033945] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.042102] systemd[1]: Created slice system-modprobe.slice.
[ 12.046389] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.048422] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 12.060717] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 12.066803] systemd[1]: Created slice User and Session Slice.
[ 12.071956] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.080083] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.089252] systemd[1]: Reached target Slices.
[ 12.093435] systemd[1]: Reached target Swap.
[ 12.097937] systemd[1]: Reached target System Time Set.
[ 12.118871] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 12.124371] systemd[1]: Listening on Syslog Socket.
[ 12.129376] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 12.135839] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 12.142971] systemd[1]: Listening on Journal Audit Socket.
[ 12.148416] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.154526] systemd[1]: Listening on Journal Socket.
[ 12.164863] systemd[1]: systemd-networkd.socket: Socket service systemd-networkd.service not loaded, refusing.
[ 12.164890] systemd[1]: Failed to listen on Network Service Netlink Socket.
[ 12.200423] systemd[1]: Listening on udev Control Socket.
[ 12.212892] systemd[1]: Listening on udev Kernel Socket.
[ 12.231785] systemd[1]: Mounting Huge Pages File System...
[ 12.245478] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.259573] systemd[1]: Mounting RPC Pipe File System...
[ 12.272923] systemd[1]: Mounting Kernel Debug File System...
[ 12.286398] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 12.286827] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 12.301251] systemd[1]: Starting Restore / save the current clock...
[ 12.321451] RPC: Registered named UNIX socket transport module.
[ 12.333342] RPC: Registered udp transport module.
[ 12.333351] RPC: Registered tcp transport module.
[ 12.333354] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.369591] systemd[1]: Starting Wait for network to be configured by ifupdown...
[ 12.384474] systemd[1]: Starting Set the console keyboard layout...
[ 12.398099] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 12.414385] systemd[1]: Starting Load Kernel Module configfs...
[ 12.427010] systemd[1]: Starting Load Kernel Module drm...
[ 12.443901] systemd[1]: Starting Load Kernel Module fuse...
[ 12.459246] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 12.459461] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 12.465927] systemd[1]: Starting Load Kernel Modules...
[ 12.505826] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.519578] systemd[1]: Starting Coldplug All udev Devices...
[ 12.542123] systemd[1]: Mounted Huge Pages File System.
[ 12.546019] EXT4-fs (sda2): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none.
[ 12.562367] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.576720] systemd[1]: Mounted RPC Pipe File System.
[ 12.589070] systemd[1]: Mounted Kernel Debug File System.
[ 12.601493] systemd[1]: Finished Restore / save the current clock.
[ 12.614240] systemd[1]: Finished Wait for network to be configured by ifupdown.
[ 12.627863] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 12.640050] systemd[1]: modprobe@configfs.service: Succeeded.
[ 12.641696] systemd[1]: Finished Load Kernel Module configfs.
[ 12.654758] random: crng init done
[ 12.666286] random: 31 urandom warning(s) missed due to ratelimiting
[ 12.677066] systemd[1]: modprobe@drm.service: Succeeded.
[ 12.678456] systemd[1]: Finished Load Kernel Module drm.
[ 12.695209] systemd[1]: modprobe@fuse.service: Succeeded.
[ 12.696547] systemd[1]: Finished Load Kernel Module fuse.
[ 12.713757] systemd[1]: Finished Load Kernel Modules.
[ 12.725544] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 12.740643] systemd[1]: Mounting FUSE Control File System...
[ 12.751024] systemd[1]: Mounting Kernel Configuration File System...
[ 12.779773] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 12.788509] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 12.801794] systemd[1]: Starting Load/Save Random Seed...
[ 12.811860] systemd[1]: Starting Apply Kernel Variables...
[ 12.823488] systemd[1]: Starting Create System Users...
[ 12.839302] systemd[1]: Mounted FUSE Control File System.
[ 12.846235] systemd[1]: Mounted Kernel Configuration File System.
[ 12.862376] systemd[1]: Finished Set the console keyboard layout.
[ 12.990450] systemd[1]: Finished Load/Save Random Seed.
[ 12.998994] systemd[1]: Finished Apply Kernel Variables.
[ 13.009684] systemd[1]: Finished Create System Users.
[ 13.019759] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 13.023640] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.076581] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 13.083624] systemd[1]: Reached target Local File Systems (Pre).
[ 13.099283] systemd[1]: Mounting /tmp...
[ 13.112470] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 13.124565] systemd[1]: Mounted /tmp.
[ 13.186823] systemd[1]: Finished Coldplug All udev Devices.
[ 13.196825] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 13.207643] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 13.292083] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ 13.308245] systemd[1]: Starting Show Plymouth Boot Screen...
[ 13.378447] systemd[1]: Started Show Plymouth Boot Screen.
[ 13.385014] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[ 13.385691] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 13.411730] systemd[1]: Reached target Local Encrypted Volumes.
[ 13.418005] systemd[1]: Reached target Paths.
[ 13.660553] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.672417] systemd[1]: Found device /dev/ttyAML0.
[ 13.693606] Registered IR keymap rc-empty
[ 13.721705] rc rc1: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1
[ 13.738141] rc rc1: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[ 13.752633] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1/input5
[ 13.772007] Bluetooth: Core ver 2.22
[ 13.777878] Bluetooth: Starting self testing
[ 13.785581] meson-ir c8100580.ir: receiver initialized
[ 13.807579] Bluetooth: ECDH test passed in 23126 usecs
[ 13.808410] debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
[ 13.818817] Bluetooth: SMP test passed in 5272 usecs
[ 13.824722] debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
[ 13.828181] Bluetooth: Finished self testing
[ 13.843504] NET: Registered PF_BLUETOOTH protocol family
[ 13.849316] Bluetooth: HCI device and connection manager initialized
[ 13.855872] Bluetooth: HCI socket layer initialized
[ 13.861659] Bluetooth: L2CAP socket layer initialized
[ 13.863047] systemd[1]: Reached target Hardware activated USB gadget.
[ 13.867552] Bluetooth: SCO socket layer initialized
[ 13.974085] Bluetooth: HCI UART driver ver 2.3
[ 13.982947] Bluetooth: HCI UART protocol H4 registered
[ 13.988955] Bluetooth: HCI UART protocol BCSP registered
[ 13.994966] Bluetooth: HCI UART protocol LL registered
[ 14.001072] Bluetooth: HCI UART protocol ATH3K registered
[ 14.010113] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 14.023421] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.026100] Bluetooth: HCI UART protocol Intel registered
[ 14.031255] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 14.044302] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 14.049904] Bluetooth: HCI UART protocol Broadcom registered
[ 14.052611] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 14.067240] Driver 'hci_uart_qca' needs updating - please use bus_type methods
[ 14.078195] Bluetooth: HCI UART protocol QCA registered
[ 14.094167] Bluetooth: HCI UART protocol AG6XX registered
[ 14.101542] Bluetooth: HCI UART protocol Marvell registered
[ 14.219071] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 14.258738] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 14.369333] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ 14.381511] systemd[1]: Starting Load/Save RF Kill Switch Status...
[ 14.425322] Bluetooth: hci0: BCM: chip id 107
[ 14.430069] systemd[1]: Reached target Bluetooth.
[ 14.431392] Bluetooth: hci0: BCM: features 0x2f
[ 14.444288] Bluetooth: hci0: BCM4345C0
[ 14.444307] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 14.471233] systemd[1]: Started Load/Save RF Kill Switch Status.
[ 14.511407] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch
[ 14.527465] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 14.531114] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 14.540068] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.phicomm,n1.bin failed with error -2
[ 14.560763] systemd[1]: Found device Storage_Device BOOT.
[ 14.662430] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[ 14.662940] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 14.663497] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 14.663662] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 14.667738] systemd[1]: Starting File System Check on /dev/disk/by-label/BOOT...
[ 14.769866] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 14.770151] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 14.775867] systemd[1]: Started File System Check Daemon to report status.
[ 14.805021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 14.858356] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 15.129445] usbcore: registered new interface driver brcmfmac
[ 15.340125] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 15.346344] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 15.386403] systemd[1]: Finished File System Check on /dev/disk/by-label/BOOT.
[ 15.404334] systemd[1]: Mounting /boot...
[ 15.705936] systemd[1]: Mounted /boot.
[ 15.722961] systemd[1]: Reached target Local File Systems.
[ 15.746450] systemd[1]: Starting Armbian leds state...
[ 15.761618] systemd[1]: Starting Armbian ZRAM config...
[ 15.773641] systemd[1]: Starting Set console font and keymap...
[ 15.786725] systemd[1]: Starting Raise network interfaces...
[ 15.799473] systemd[1]: Starting Preprocess NFS configuration...
[ 15.810385] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 15.818968] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[ 15.819240] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[ 15.825277] systemd[1]: Finished Set console font and keymap.
[ 15.852498] systemd[1]: nfs-config.service: Succeeded.
[ 15.859648] systemd[1]: Finished Preprocess NFS configuration.
[ 15.877520] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
[ 15.889562] systemd[1]: Received SIGRTMIN+20 from PID 367 (plymouthd).
[ 15.889831] systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped.
[ 15.889900] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
[ 15.889977] systemd[1]: Reached target NFS client services.
[ 15.930391] systemd[1]: Finished Armbian leds state.
[ 16.057886] zram: Added device: zram0
[ 16.064174] zram: Added device: zram1
[ 16.070409] zram: Added device: zram2
[ 16.180705] zram0: detected capacity change from 0 to 1853584
[ 16.189689] systemd[1]: Finished Raise network interfaces.
[ 16.222013] Adding 926788k swap on /dev/zram0. Priority:5 extents:1 across:926788k SSFS
[ 16.401297] zram1: detected capacity change from 0 to 102400
[ 16.491706] systemd[1]: Finished Armbian ZRAM config.
[ 16.508745] systemd[1]: Starting Armbian memory supported logging...
[ 16.587371] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none.
[ 16.597532] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[ 19.547798] systemd[1]: Finished Armbian memory supported logging.
[ 19.572463] systemd[1]: Starting Journal Service...
[ 19.789411] systemd[1]: Started Journal Service.
[ 19.830008] systemd-journald[762]: Received client request to flush runtime journal.
[ 21.637024] systemd-journald[762]: Received client request to relinquish /var/log/journal/336c4f4d1ccf1d4f8da4996c64c88e9f access.
[ 23.918336] meson8b-dwmac c9410000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 24.101515] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [RTL8211F Gigabit Ethernet] (irq=51)
[ 25.638112] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[ 25.651783] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[ 25.669985] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rgmii link mode
[ 32.209637] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 32.681815] meson-gx-mmc d0070000.mmc: unaligned sg len 112 blksize 512, disabling descriptor DMA for transfer
[ 148.648615] usb 1-1: USB disconnect, device number 2
ophub
commented
1 year ago
Phicomm N1 斐讯N1 Armbian 开机错误信息
Armbian_23.08.0_amlogic_s905d_bullseye_5.15.123_server_2023.08.01
开机错误信息，下文有完整的开机信息：
错误0:
错误1:
错误2:
错误3:
错误4:
错误5:
错误6:
所有开机信息：
设置wifi时会弹出如图的提示，wifi是正常可以使用的，也许是上游 armbian 的 config 功能的bug