cm311-1扩容128G EMMC U盘启动成功,写入成功,启动失败

lsf343634352 commented 1 year ago

S905l3 CM311-1

Armbian Version | 系统版本

Kernel Version: [e.g. 5.15.100]
Release: [e.g. jammy/bullseye]

Describe the bug | 问题描述 今天换了个128G的EMMC,然后用U盘启动成功,使用armbian安装命令代码117,也安装成功拔掉U盘后单独启动,启动不了

uboot time: 7535555 us [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.128-ophub (root@armbian-rock5b) (aarch64-none-elf-gcc (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35)) 12.3.1 20230626, GNU ld (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35)) 2.40.0.20230627) #1 SMP PREEMPT Sun Aug 27 10:47:10 CST 2023 [ 0.000000] Machine model: Amlogic Meson GXL (S905L2) X7 5G Tv Box [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000062800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000077ffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000077ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000077ffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 19 pages/cpu s37784 r8192 d31848 u77824 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483840 [ 0.000000] Kernel command line: root=UUID=a17e0c54-72e2-4c9c-ab6b-62015175797d rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 max_loop=128 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=f6:4d:9c:dd:58:2c [ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=f6:4d:9c:dd:58:2c", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1567984K/1966080K available (15296K kernel code, 2730K rwdata, 4836K rodata, 3776K init, 891K bss, 135952K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000577] Console: colour dummy device 80x25 [ 0.000958] printk: console [tty0] enabled [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.001022] pid_max: default: 32768 minimum: 301 [ 0.001214] LSM: Security Framework initializing [ 0.001329] SELinux: Initializing. [ 0.001602] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001628] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.003826] rcu: Hierarchical SRCU implementation. [ 0.005184] EFI services will not be available. [ 0.005640] smp: Bringing up secondary CPUs ... [ 0.006309] Detected VIPT I-cache on CPU1 [ 0.006374] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.007127] Detected VIPT I-cache on CPU2 [ 0.007184] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.007878] Detected VIPT I-cache on CPU3 [ 0.007928] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.008012] smp: Brought up 1 node, 4 CPUs [ 0.008079] SMP: Total of 4 processors activated. [ 0.008090] CPU features: detected: 32-bit EL0 Support [ 0.008100] CPU features: detected: 32-bit EL1 Support [ 0.008113] CPU features: detected: CRC32 instructions [ 0.008795] CPU: All CPU(s) started at EL2 [ 0.008826] alternatives: patching kernel code [ 0.010306] devtmpfs: initialized [ 0.018175] Registered cp15_barrier emulation handler [ 0.018216] Registered setend emulation handler [ 0.018378] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.018409] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.024933] prandom: seed boundary self test passed [ 0.026448] prandom: 100 self tests passed [ 0.049387] prandom32: self test passed (less than 6 bits correlated) [ 0.049441] pinctrl core: initialized pinctrl subsystem [ 0.050073] DMI not present or invalid. [ 0.050624] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.052666] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.052902] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.053107] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.053205] audit: initializing netlink subsys (disabled) [ 0.053448] audit: type=2000 audit(0.049:1): state=initialized audit_enabled=0 res=1 [ 0.054548] thermal_sys: Registered thermal governor 'step_wise' [ 0.054860] cpuidle: using governor ladder [ 0.055070] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.055189] ASID allocator initialised with 65536 entries [ 0.055377] Serial: AMBA PL011 UART driver [ 0.073490] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu [ 0.077968] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu [ 0.078257] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx [ 0.087406] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.087442] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.087456] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.087469] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.583277] cryptd: max_cpu_qlen set to 1000 [ 1.586902] "cryptomgr_test" (91) uses obsolete ecb(arc4) skcipher [ 1.598557] alg: No test for 842 (842-generic) [ 1.598696] alg: No test for 842 (842-scomp) [ 1.693348] DRBG: Continuing without Jitter RNG [ 1.785919] raid6: neonx8 gen() 2215 MB/s [ 1.842661] raid6: neonx8 xor() 1600 MB/s [ 1.899414] raid6: neonx4 gen() 2170 MB/s [ 1.956153] raid6: neonx4 xor() 1523 MB/s [ 2.012903] raid6: neonx2 gen() 2064 MB/s [ 2.069651] raid6: neonx2 xor() 1413 MB/s [ 2.126408] raid6: neonx1 gen() 1772 MB/s [ 2.183145] raid6: neonx1 xor() 1214 MB/s [ 2.239901] raid6: int64x8 gen() 1389 MB/s [ 2.296626] raid6: int64x8 xor() 740 MB/s [ 2.353387] raid6: int64x4 gen() 1571 MB/s [ 2.410154] raid6: int64x4 xor() 807 MB/s [ 2.466857] raid6: int64x2 gen() 1398 MB/s [ 2.523576] raid6: int64x2 xor() 749 MB/s [ 2.580304] raid6: int64x1 gen() 1035 MB/s [ 2.637025] raid6: int64x1 xor() 517 MB/s [ 2.637037] raid6: using algorithm neonx8 gen() 2215 MB/s [ 2.637048] raid6: .... xor() 1600 MB/s, rmw enabled [ 2.637059] raid6: using neon recovery algorithm [ 2.637382] fbcon: Taking over console [ 2.637428] ACPI: Interpreter disabled. [ 2.639552] iommu: Default domain type: Translated [ 2.639583] iommu: DMA domain TLB invalidation policy: strict mode [ 2.639981] vgaarb: loaded [ 2.640534] SCSI subsystem initialized [ 2.640789] usbcore: registered new interface driver usbfs [ 2.640836] usbcore: registered new interface driver hub [ 2.640880] usbcore: registered new device driver usb [ 2.641371] mc: Linux media interface: v0.10 [ 2.641403] videodev: Linux video capture interface: v2.00 [ 2.641700] EDAC MC: Ver: 3.0.0 [ 2.642779] Advanced Linux Sound Architecture Driver Initialized. [ 2.643989] clocksource: Switched to clocksource arch_sys_counter [ 2.644354] VFS: Disk quotas dquot_6.6.0 [ 2.644439] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.644616] FS-Cache: Loaded [ 2.645111] pnp: PnP ACPI: disabled [ 2.651864] NET: Registered PF_INET protocol family [ 2.652073] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 2.653319] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 2.653372] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.653450] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.653571] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 2.653779] TCP: Hash tables configured (established 16384 bind 16384) [ 2.654092] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear) [ 2.654211] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 2.654264] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 2.654463] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.654499] NET: Registered PF_XDP protocol family [ 2.654521] PCI: CLS 0 bytes, default 64 [ 2.654807] Trying to unpack rootfs image as initramfs... [ 2.661457] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 2.661994] kvm [1]: IPA Size Limit: 40 bits [ 2.662894] kvm [1]: vgic interrupt IRQ9 [ 2.663070] kvm [1]: Hyp mode initialized successfully [ 3.500491] Freeing initrd memory: 19628K [ 3.722598] Initialise system trusted keyrings [ 3.722891] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 3.729389] zbud: loaded [ 3.731088] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.731630] fuse: init (API version 7.34) [ 3.732140] SGI XFS with ACLs, security attributes, quota, no debug enabled [ 3.772687] NET: Registered PF_ALG protocol family [ 3.826554] xor: measuring software checksum speed [ 3.830756] 8regs : 2365 MB/sec [ 3.834290] 32regs : 2802 MB/sec [ 3.839085] arm64_neon : 2063 MB/sec [ 3.839097] xor: using function: 32regs (2802 MB/sec) [ 3.839113] Key type asymmetric registered [ 3.839125] Asymmetric key parser 'x509' registered [ 3.839285] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 3.839475] io scheduler mq-deadline registered [ 3.839491] io scheduler kyber registered [ 3.839657] io scheduler bfq registered [ 3.865155] soc soc0: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2) Detected [ 3.867641] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.869657] Serial: AMBA driver [ 3.870055] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart [ 4.904008] printk: console [ttyAML0] enabled [ 4.918088] brd: module loaded [ 4.984844] loop: module loaded [ 4.991994] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.992911] ehci-pci: EHCI PCI platform driver [ 4.997408] ehci-platform: EHCI generic platform driver [ 5.003100] usbcore: registered new interface driver cdc_wdm [ 5.008134] usbcore: registered new interface driver usb-storage [ 5.014581] mousedev: PS/2 mouse device common for all mice [ 5.020784] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi [ 5.026890] meson-vrtc c81000a8.rtc: registered as rtc0 [ 5.031235] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:05 UTC (5) [ 5.039788] i2c_dev: i2c /dev entries driver [ 5.045813] Registered IR keymap rc-cec [ 5.047400] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0 [ 5.055582] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input0 [ 5.067825] sdhci: Secure Digital Host Controller Interface driver [ 5.070264] sdhci: Copyright(c) Pierre Ossman [ 5.074599] Synopsys Designware Multimedia Card Interface Driver [ 5.081381] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.081984] meson-gx-mmc d0072000.mmc: Got CD GPIO [ 5.083025] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 5.088834] meson-sm: secure-monitor enabled [ 5.103052] gxl-crypto c883e000.crypto: will run requests pump with realtime priority [ 5.108549] gxl-crypto c883e000.crypto: will run requests pump with realtime priority [ 5.119864] hid: raw HID events driver (C) Jiri Kosina [ 5.121423] usbcore: registered new interface driver usbhid [ 5.126661] gpio irq setup: hwirq: 0x3A irqfirst: 0x34 irqlast: 0x3A pin[48] [ 5.126907] usbhid: USB HID core driver [ 5.134130] genirq: Setting trigger mode 3 for irq 46 failed (meson_gpio_irq_set_type+0x0/0x100) [ 5.138136] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [BL31]: tee size: 0 [ 5.161139] Initializing XFRM netlink socket [ 5.162020] NET: Registered PF_INET6 protocol family [ 5.202166] Segment Routing with IPv6 [ 5.202213] RPL Segment Routing with IPv6 [ 5.204398] In-situ OAM (IOAM) with IPv6 [ 5.208251] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.214951] NET: Registered PF_PACKET protocol family [ 5.219096] NET: Registered PF_KEY protocol family [ 5.223878] 8021q: 802.1Q VLAN Support v1.8 [ 5.228396] registered taskstats version 1 [ 5.232015] Loading compiled-in X.509 certificates [ 5.239003] zswap: loaded using pool zstd/zbud [ 5.241643] Key type .fscrypt registered [ 5.245021] Key type fscrypt-provisioning registered [ 5.250943] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 5.285888] meson-drm d0100000.vpu: Queued 3 outputs on vpu [ 5.314056] meson-dw-hdmi c883a000.hdmi-tx: Unsupported HDMI controller (0d0d:0d:0d) [ 5.316559] meson-drm d0100000.vpu: failed to bind c883a000.hdmi-tx (ops 0xffffffc00a0dfdb8): -19 [ 5.324986] meson-drm d0100000.vpu: Couldn't bind all components [ 5.331308] meson-drm d0100000.vpu: master bind failed: -19 [ 5.338748] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 5.343016] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 5.349261] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 5.356089] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 5.362170] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 5.367421] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 5.374748] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 5.382159] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 5.383542] mmc2: new HS200 MMC card at address 0001 [ 5.387332] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 5.387338] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 5.393329] mmcblk2: mmc2:0001 DA4128 116 GiB [ 5.399242] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 5.407760] mmcblk2: p1 p2 [ 5.410020] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 5.416963] mmcblk2boot0: mmc2:0001 DA4128 4.00 MiB [ 5.418646] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 5.422219] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 [ 5.426120] mmcblk2boot1: mmc2:0001 DA4128 4.00 MiB [ 5.429343] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 [ 5.453721] mmcblk2rpmb: mmc2:0001 DA4128 16.0 MiB, chardev (240:0) [ 5.948578] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 5.950242] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 5.957484] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 5.966347] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 5.969875] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 5.977349] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 5.986559] xhci-hcd xhci-hcd.1.auto: irq 48, io mem 0xc9000000 [ 5.992557] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 5.998004] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 6.005400] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 6.012008] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 6.020048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.027206] usb usb1: Product: xHCI Host Controller [ 6.032035] usb usb1: Manufacturer: Linux 5.15.128-ophub xhci-hcd [ 6.038073] usb usb1: SerialNumber: xhci-hcd.1.auto [ 6.043417] hub 1-0:1.0: USB hub found [ 6.046653] hub 1-0:1.0: 2 ports detected [ 6.051031] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.058712] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 6.066796] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.073953] usb usb2: Product: xHCI Host Controller [ 6.078946] usb usb2: Manufacturer: Linux 5.15.128-ophub xhci-hcd [ 6.084829] usb usb2: SerialNumber: xhci-hcd.1.auto [ 6.090168] hub 2-0:1.0: USB hub found [ 6.093588] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 6.104434] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq [ 6.104878] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware get_dvfs_info 0003 [ 6.142394] ALSA device list: [ 6.142438] No soundcards found. [ 6.144794] Freeing unused kernel memory: 3776K [ 6.154069] Run /init as init process [ 6.763513] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 6.764292] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 6.772286] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 6.777905] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 6.786145] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 6.794564] lima d00c0000.gpu: bus rate = 166666667 [ 6.797944] lima d00c0000.gpu: mod rate = 24000000 [ 6.802793] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 6.815265] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 0 [ 6.960344] blk_update_request: I/O error, dev mmcblk2, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 6.967878] blk_update_request: I/O error, dev mmcblk2, sector 8 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 6.975374] Buffer I/O error on dev mmcblk2, logical block 1, async page read [ 7.158026] mmc2: tuning execution failed: -5 [ 7.158169] mmc2: tried to HW reset card, got error -5 [ 7.162522] blk_update_request: I/O error, dev mmcblk2, sector 239648 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 7.173427] blk_update_request: I/O error, dev mmcblk2, sector 239648 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 7.183355] Buffer I/O error on dev mmcblk2p1, logical block 4, async page read done.

lsf343634352 commented 1 year ago

又写入了一次,又出现问题