Support for Armbian in Amlogic, Rockchip and Allwinner boxes. Support a311d, s922x, s905x3, s905x2, s912, s905d, s905x, s905w, s905, s905l, rk3588, rk3568, rk3399, rk3328, h6, etc.
Describe the bug | 问题描述
I have the same issue raised here with exactly the same device, I did a fresh install of Armbian 23.11.0-trunk Lunar and used the dtb meson-gxm-tx9-pro.dtb but wireless is not available.
root@armbian:~# ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 3: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: permaddr 4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether e2:16:da:xx:xx:xx brd ff:ff:ff:ff:ff:ff altname end0
Device Information | 设备信息
**Armbian Version | Armbian 23.11.0-trunk
Describe the bug | 问题描述 I have the same issue raised here with exactly the same device, I did a fresh install of Armbian 23.11.0-trunk Lunar and used the dtb meson-gxm-tx9-pro.dtb but wireless is not available.
root@armbian:~# ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 3: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: permaddr 4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether e2:16:da:xx:xx:xx brd ff:ff:ff:ff:ff:ff altname end0
Can you please let me know if I missed something?
Thanks