Support for Armbian in Amlogic, Rockchip and Allwinner boxes. Support a311d, s922x, s905x3, s905x2, s912, s905d, s905x, s905w, s905, s905l, rk3588, rk3568, rk3399, rk3328, h6, etc.
GNU General Public License v2.0
5.69k
stars
1.83k
forks
source link
2 boxes bricked in 1 week after firmware update #1953
Device Information
SOC: S905x3
Model H96 Max X3 / 64GB
Armbian Version
Start Version: Armbian_23.08.0_amlogic_s905x3_bullseye_5.15.129_server_2023.09.02
After installation of the above version to emmc I upgraded to 24.2 and rebooted successfully. After that I tried to switch the kernel to 6.1.68. The upgrade ran without errors but the box does not start and even the USB Burning tool does not detect the box anymore. This is the 2nd box broken on my desk after the same procedure.
Is there another way to reactivate my boxes??
What was wrong with the procedure I did??
Here the serial output:
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0;EMMC:0;READ:0;0.0;CHK:0;`
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0001 - pwm id 0x00
bl2_stage_init 0xc0
bl2_stage_init 0x02
L0:00000000
L1:00000703
L2:00008067
L3:15000020
B2:20282000
B1:a0f83180
TE: 142993
BL2 Built : 06:17:13, Jun 28 2019. g12b gf0505d7-dirty - qi.duan@droid13
Board ID = 1
Set A53 clk to 24M
Set A73 clk to 24M
Set clk81 to 24M
SYS1 pll lock check retry
try t0...
SYS1 pll lock check retry
try t1...
SYS1 pll lock check retry
Stop here...
Device Information SOC: S905x3 Model H96 Max X3 / 64GB
Armbian Version Start Version: Armbian_23.08.0_amlogic_s905x3_bullseye_5.15.129_server_2023.09.02
After installation of the above version to emmc I upgraded to 24.2 and rebooted successfully. After that I tried to switch the kernel to 6.1.68. The upgrade ran without errors but the box does not start and even the USB Burning tool does not detect the box anymore. This is the 2nd box broken on my desk after the same procedure.
Is there another way to reactivate my boxes??
What was wrong with the procedure I did??
Here the serial output: