search

ophub / amlogic-s9xxx-armbian

Support for Armbian in Amlogic, Rockchip and Allwinner boxes. Support a311d, s922x, s905x3, s905x2, s912, s905d, s905x, s905w, s905, s905l, rk3588, rk3568, rk3399, rk3328, h6, etc.
GNU General Public License v2.0
5.8k stars 1.86k forks source link

rebuild后无法启动 #2502

Closed ghp3000 closed 2 weeks ago

ghp3000 commented 3 weeks ago

Device Information | 设备信息

Armbian Version | 系统版本

编译环境 -Ubuntu 22.04.1 LTS -kernel 6.8.0-40-generic

编译过程 cd ~ git clone https://github.com/ophub/amlogic-s9xxx-armbian.git cd amlogic-s9xxx-armbian git clone https://github.com/armbian/build.git cd build ./compile.sh RELEASE=bullseye BOARD=odroidn2 BRANCH=current BUILD_MINIMAL=no \ BUILD_ONLY=default HOST=armbian BUILD_DESKTOP=no EXPERT=yes KERNEL_CONFIGURE=no \ COMPRESS_OUTPUTIMAGE="sha" SHARE_LOG=yes

cd .. sudo ./rebuild -b s905l -k 6.6.47

写盘 用rufus将 ~/amlogic-s9xxx-armbian/build/output/images/Armbian_24.11.0_amlogic_s905l_bullseye_6.6.47_server_2024.08.22.img.gz写入到一张8G Micro SD

启动日志

Details

GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0; TE: 70187 BL2 Built : 01:56:32, Dec 22 2016. gxl g1614c0b - xiaobo.gu@droid05 Board ID = 7, adc=562 set vcck to 1070 mv set vddee to 1070 mv CPU clk: 1200MHz 2layers board, use ddr_set[0] DQS-corr enabled DDR scramble enabled DDR3 chl: Rank0+1 @ 792MHz - FAIL DDR3 chl: Rank0 @ 792MHz - PASS Rank0: 1024MB(auto)-2T-11 DataBus test pass! AddrBus test pass! -s Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000 New fip structure! Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x00007400 Load bl301 from eMMC, src: 0x00018200, des: 0x01200000, size: 0x00002200 Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019400 Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x00086400 NOTICE: BL3-1: v1.0(debug):959fdf0 NOTICE: BL3-1: Built : 15:01:44, Dec 29 2016 aml log : bl31 normal boot ! [Image: gxl_v1.1.3089-661026e 2017-01-10 18:34:56 qiufang.dai@droid07] bl30: check_permit, count is 1 bl30: check_permit: ok! chipid: ef be ad de d f0 ad ba ef be ad de not ES chip efuse init ops = c2 efuse init hdcp = c, cf9=7 [0.500996 Inits done] INFsOe:c u r e BtLa3s-k1 :s tIanritt!ia lizing runtihmieg hs etvices WARNING: No OPTEE provided by BL2 boot loader ERROR: Error initializing runtime service opteed_fast INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x1000000 INFO: BL3-1: Next image spsr = 0x3c9 U-Boot 2015.01-gd020ddf (Mar 09 2017 - 14:51:58) DRAM: 1 GiB Relocation Offset is: 36eec000 gpio: pin GPIODV_24 (gpio 43) value is 1 mwm 0xc8837004:[0x aa203] with [0x ea203] ok mwm 0xc883700c:[0x 3e3b744] with [0x 3e3b764] ok mwm 0xc8837010:[0x c0101] with [0x c8101] ok mwm 0xc8837010:[0x c8101] with [0x 128101] ok register usb cfg[0][1] = 0000000037f61028 [CANVAS]canvas init vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters vpu: clk_level = 7 vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300) vpp: vpp_init MMC: aml_priv->desc_buf = 0x0000000033edcac0 aml_priv->desc_buf = 0x0000000033edede0 SDIO Port B: 0, SDIO Port C: 1 emmc/sd response timeout, cmd8, status=0x3ff2800 emmc/sd response timeout, cmd55, status=0x3ff2800 [mmc_init] mmc init success mmc read lba=0x14000, blocks=0x400 Amlogic multi-dtb tool Multi dtb detected 2layers board, board id use 7 Multi dtb tool version: v2 . Support 6 dtbs. aml_dt soc: gxl platform: p211 variant: 1g dtb 0 soc: gxbb plat: p201 vari: 1g dtb 1 soc: gxbb plat: p201 vari: 2g dtb 2 soc: gxl plat: p211 vari: 1g dtb 3 soc: gxl plat: p211 vari: 2g dtb 4 soc: gxl plat: p215 vari: 1g dtb 5 soc: gxl plat: p215 vari: 2g Find match dtb: 2 start dts,buffer=0000000033ee1630,dt_addr=0000000033ef1e30 parts: 1 00: data ffffffffffffffff 4 get_dtb_struct: Get emmc dtb OK! Partition table get from SPL is : name offset size flag =================================================================================== 0: bootloader 0 400000 0 1: reserved 2400000 4000000 0 2: cache 6c00000 0 0 3: env 7400000 800000 0 4: data 8400000 1c9c00000 4 mmc read lba=0x12000, blocks=0x2 mmc read lba=0x12002, blocks=0x2 mmc_read_partition_tbl: mmc read partition OK! eMMC/TSD partition table have been checked OK! mmc env offset: 0x7400000 In: serial Out: serial Err: serial board id is : 7 hpd_state=0 cvbs performance type = 7, table = 1 [store]To run cmd[emmc dtb_read 0x1000000 0x40000] read emmc dtb Amlogic multi-dtb tool Multi dtb detected Multi dtb tool version: v2 . Support 6 dtbs. aml_dt soc: gxl platform: p211 variant: 1g dtb 0 soc: gxbb plat: p201 vari: 1g dtb 1 soc: gxbb plat: p201 vari: 2g dtb 2 soc: gxl plat: p211 vari: 1g dtb 3 soc: gxl plat: p211 vari: 2g dtb 4 soc: gxl plat: p215 vari: 1g dtb 5 soc: gxl plat: p215 vari: 2g Find match dtb: 2 Net: dwmac.c9410000 wipe_data=successful wipe_cache=successful Can not find partition name "logo" Cannot find dev. amlmmc cmd failed store - STORE sub-system Usage: store store init flag store read name addr off|partition size read 'size' bytes starting at offset 'off' to/from memory address 'addr', skipping bad blocks. store write name addr off|partition size write 'size' bytes starting at offset 'off' to/from memory address 'addr', skipping bad blocks. store rom_write add off size. write uboot to the boot device store erase boot/data: erase the area which is uboot or data store erase partition : erase the area which partition in u-boot store erase dtb store erase key store disprotect key store rom_protect on/off store scrub off|partition size scrub the area from offset and size store dtb iread/read/write addr read/write dtb, size is optional store key read/write addr read/write key, size is optional cmd store failed Err imgread(L333):Fail to read 0x2000B from part[logo] at offset 0 There is no valid bmp file at the given address [CANVAS]addr=0x3d800000 width=3840, height=2160 There is no valid bmp file at the given address upgrade_step=2 amlkey_init() enter! [EFUSE_MSG]keynum is 4 [BL31]: tee size: 0 [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet rebootmode=cold_boot Hit any key to stop autoboot: 0 card in [mmc_init] mmc init success Device: SDIO Port B Manufacturer ID: 83 OEM: 4e43 Name: NCard Tran Speed: 50000000 Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 7.4 GiB Bus Width: 4-bit reading s905_autoscript 1351 bytes read in 3 ms (439.5 KiB/s) Executing script at 01020000 start amlogic old u-boot reading boot_android ** Unable to read file boot_android ** ** Bad device usb 0 ** reading u-boot.ext ** Unable to read file u-boot.ext ** ** Bad device usb 0 ** reading uEnv.txt 373 bytes read in 3 ms (121.1 KiB/s) mac=8C:6D:50:62:E9:09 reading /zImage 47186432 bytes read in 2835 ms (15.9 MiB/s) reading /uInitrd 13539288 bytes read in 814 ms (15.9 MiB/s) reading /dtb/amlogic/meson-gxl-s905l3b-m302a.dtb 40136 bytes read in 11 ms (3.5 MiB/s) libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND [rsvmem] bl31 reserved memory set addr error. Loading init Ramdisk from Legacy Image at 15000000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 13539224 Bytes = 12.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Amlogic multi-dtb tool Single dtb detected load dtb from 0x1000000 ...... Flattened Device Tree blob at 01000000 Booting using the fdt blob at 0x1000000 libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND [rsvmem] bl31 reserved memory set addr error. Loading Ramdisk to 331f0000, end 33ed9798 ... OK Loading Device Tree to 000000001fff3000, end 000000001ffffcc7 ... OK fdt_instaboot: get header err Starting kernel ... uboot time: 6019638 us [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.6.43-ophub (root@fv-az523-848) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 13.3.Rel1 (Build arm-13.24)) 13.3.1 20240614, GNU ld (Arm GNU Toolchain 13.3.Rel1 (Build arm-13.24)) 2.42.0.20240614) #1 SMP Sat Jul 27 09:39:04 EDT 2024 [ 0.000000] Machine model: Amlogic Meson GXL (S905L3b) MBH-M302A Box [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000023000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000023000000..0x0000000032ffffff (262144 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x0000000000000000..0x0000000000ffffff (16384 KiB) nomap non-reusable hwrom@0 [ 0.000000] OF: reserved mem: 0x0000000005000000..0x00000000052fffff (3072 KiB) nomap non-reusable secmon@5000000 [ 0.000000] OF: reserved mem: 0x0000000005300000..0x00000000072fffff (32768 KiB) nomap non-reusable secmon@5300000 [ 0.000000] OF: reserved mem: 0x0000000010000000..0x00000000101fffff (2048 KiB) nomap non-reusable secmon@10000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000037ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 29 pages/cpu s80616 r8192 d29976 u118784 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: root=UUID=8490d97a-8fde-417f-9b66-b5dfb09f9e61 rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 max_loop=128 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=8C:6D:50:62:E9:09 [ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=8C:6D:50:62:E9:09", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 225792 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x000000001bff3000-0x000000001fff3000] (64MB) [ 0.000000] Memory: 457868K/917504K available (18688K kernel code, 4032K rwdata, 16212K rodata, 6976K init, 924K bss, 197492K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000697] Console: colour dummy device 80x25 [ 0.000709] printk: console [tty0] enabled [ 0.001107] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001128] pid_max: default: 32768 minimum: 301 [ 0.003200] LSM: initializing lsm=capability,selinux,integrity [ 0.004833] SELinux: Initializing. [ 0.009051] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.009072] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.012738] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.012955] rcu: Hierarchical SRCU implementation. [ 0.012971] rcu: Max phase no-delay instances is 1000. [ 0.014424] EFI services will not be available. [ 0.014838] smp: Bringing up secondary CPUs ... [ 0.015445] Detected VIPT I-cache on CPU1 [ 0.015549] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.016247] Detected VIPT I-cache on CPU2 [ 0.016343] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.017024] Detected VIPT I-cache on CPU3 [ 0.017119] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.017200] smp: Brought up 1 node, 4 CPUs [ 0.017259] SMP: Total of 4 processors activated. [ 0.017270] CPU features: detected: 32-bit EL0 Support [ 0.017279] CPU features: detected: 32-bit EL1 Support [ 0.017290] CPU features: detected: CRC32 instructions [ 0.017367] CPU: All CPU(s) started at EL2 [ 0.017384] alternatives: applying system-wide alternatives [ 0.019403] devtmpfs: initialized [ 0.026345] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.026391] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.032848] prandom: seed boundary self test passed [ 0.033543] prandom: 100 self tests passed [ 0.033593] pinctrl core: initialized pinctrl subsystem [ 0.034023] DMI not present or invalid. [ 0.035025] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.035998] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.036370] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.036659] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.036768] audit: initializing netlink subsys (disabled) [ 0.036999] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1 [ 0.038109] thermal_sys: Registered thermal governor 'step_wise' [ 0.038186] cpuidle: using governor ladder [ 0.038415] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.038526] ASID allocator initialised with 65536 entries [ 0.038711] Serial: AMBA PL011 UART driver [ 0.049249] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000 [ 0.049455] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000 [ 0.049523] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /soc/vpu@d0100000 [ 0.051979] platform d0100000.vpu: Fixed dependency cycle(s) with /cvbs-connector [ 0.052077] platform cvbs-connector: Fixed dependency cycle(s) with /soc/vpu@d0100000 [ 0.052283] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /hdmi-connector [ 0.052368] platform hdmi-connector: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000 [ 0.053029] Modules: 21008 pages in range for non-PLT usage [ 0.053036] Modules: 512528 pages in range for PLT usage [ 0.054175] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.054213] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.054225] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.054235] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.054245] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.054255] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.054265] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.054275] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.055410] cryptd: max_cpu_qlen set to 1000 [ 0.124286] raid6: neonx8 gen() 2263 MB/s [ 0.192339] raid6: neonx4 gen() 2229 MB/s [ 0.260386] raid6: neonx2 gen() 2141 MB/s [ 0.328444] raid6: neonx1 gen() 1832 MB/s [ 0.396484] raid6: int64x8 gen() 1415 MB/s [ 0.464533] raid6: int64x4 gen() 1573 MB/s [ 0.532587] raid6: int64x2 gen() 1404 MB/s [ 0.600643] raid6: int64x1 gen() 1035 MB/s [ 0.600654] raid6: using algorithm neonx8 gen() 2263 MB/s [ 0.668673] raid6: .... xor() 1655 MB/s, rmw enabled [ 0.668684] raid6: using neon recovery algorithm [ 0.668974] ACPI: Interpreter disabled. [ 0.669785] iommu: Default domain type: Translated [ 0.669812] iommu: DMA domain TLB invalidation policy: strict mode [ 0.670431] SCSI subsystem initialized [ 0.670886] usbcore: registered new interface driver usbfs [ 0.670930] usbcore: registered new interface driver hub [ 0.670975] usbcore: registered new device driver usb [ 0.671425] mc: Linux media interface: v0.10 [ 0.671477] videodev: Linux video capture interface: v2.00 [ 0.671553] pps_core: LinuxPPS API ver. 1 registered [ 0.671564] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.671585] PTP clock support registered [ 0.671738] EDAC MC: Ver: 3.0.0 [ 0.672340] scmi_core: SCMI protocol bus registered [ 0.672815] Advanced Linux Sound Architecture Driver Initialized. [ 0.673880] vgaarb: loaded [ 0.674340] clocksource: Switched to clocksource arch_sys_counter [ 0.677758] VFS: Disk quotas dquot_6.6.0 [ 0.677818] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.678064] FS-Cache: Loaded [ 0.678428] pnp: PnP ACPI: disabled [ 0.685667] NET: Registered PF_INET protocol family [ 0.685838] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.687909] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.687954] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.687976] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.688081] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.688293] TCP: Hash tables configured (established 8192 bind 8192) [ 0.688734] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear) [ 0.688893] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.688926] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.689149] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.689183] NET: Registered PF_XDP protocol family [ 0.689206] PCI: CLS 0 bytes, default 64 [ 0.689447] Trying to unpack rootfs image as initramfs... [ 0.694655] kvm [1]: IPA Size Limit: 40 bits [ 0.697543] kvm [1]: vgic interrupt IRQ9 [ 0.697599] kvm [1]: Hyp mode initialized successfully [ 0.700042] Initialise system trusted keyrings [ 0.700302] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.700374] zbud: loaded [ 0.703088] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.704557] fuse: init (API version 7.39) [ 0.705370] SGI XFS with ACLs, security attributes, quota, no debug enabled [ 0.744417] NET: Registered PF_ALG protocol family [ 0.744514] xor: measuring software checksum speed [ 0.748444] 8regs : 2524 MB/sec [ 0.752370] 32regs : 2524 MB/sec [ 0.756574] arm64_neon : 2355 MB/sec [ 0.756594] xor: using function: 32regs (2524 MB/sec) [ 0.756612] Key type asymmetric registered [ 0.756623] Asymmetric key parser 'x509' registered [ 0.756741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241) [ 0.756972] io scheduler mq-deadline registered [ 0.756988] io scheduler kyber registered [ 0.757167] io scheduler bfq registered [ 0.799546] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.818568] soc soc0: Amlogic Meson GXL (S905L) Revision 21:c (c2:2) Detected [ 0.820778] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 0.823579] Serial: AMBA driver [ 0.824248] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 14, base_baud = 1500000) is a meson_uart [ 0.824305] printk: console [ttyAML0] enabled [ 1.954939] random: crng init done [ 1.965054] brd: module loaded [ 2.029499] loop: module loaded [ 2.036153] usbcore: registered new interface driver cdc_wdm [ 2.036229] usbcore: registered new interface driver usb-storage [ 2.042289] usbcore: registered new interface driver usbserial_generic [ 2.048678] usbserial: USB Serial support registered for generic [ 2.054627] usbcore: registered new interface driver ch341 [ 2.060069] usbserial: USB Serial support registered for ch341-uart [ 2.066286] usbcore: registered new interface driver cp210x [ 2.071785] usbserial: USB Serial support registered for cp210x [ 2.077644] usbcore: registered new interface driver ftdi_sio [ 2.083339] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.090601] usbcore: registered new interface driver garmin_gps [ 2.096466] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 2.103361] usbcore: registered new interface driver ipw [ 2.108629] usbserial: USB Serial support registered for IPWireless converter [ 2.115694] usbcore: registered new interface driver opticon [ 2.121295] usbserial: USB Serial support registered for opticon [ 2.127251] usbcore: registered new interface driver pl2303 [ 2.132769] usbserial: USB Serial support registered for pl2303 [ 2.138637] usbcore: registered new interface driver qcaux [ 2.144069] usbserial: USB Serial support registered for qcaux [ 2.149853] usbcore: registered new interface driver qcserial [ 2.155564] usbserial: USB Serial support registered for Qualcomm USB modem [ 2.162454] usbcore: registered new interface driver symbolserial [ 2.168480] usbserial: USB Serial support registered for symbol [ 2.174358] usbcore: registered new device driver onboard-usb-hub [ 2.181624] mousedev: PS/2 mouse device common for all mice [ 2.187657] meson-vrtc c81000a8.rtc: registered as rtc0 [ 2.191049] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2) [ 2.199569] i2c_dev: i2c /dev entries driver [ 2.205183] Registered IR keymap rc-cec [ 2.207204] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0 [ 2.215466] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input0 [ 2.227281] sdhci: Secure Digital Host Controller Interface driver [ 2.230083] sdhci: Copyright(c) Pierre Ossman [ 2.234413] Synopsys Designware Multimedia Card Interface Driver [ 2.241318] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.241789] meson-gx-mmc d0072000.mmc: Got CD GPIO [ 2.242721] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 2.256500] ledtrig-cpu: registered to indicate activity on CPUs [ 2.263908] meson-sm: secure-monitor enabled [ 2.267937] gxl-crypto c883e000.crypto: will run requests pump with realtime priority [ 2.274430] gxl-crypto c883e000.crypto: will run requests pump with realtime priority [ 2.282406] hid: raw HID events driver (C) Jiri Kosina [ 2.287141] usbcore: registered new interface driver usbhid [ 2.292558] usbhid: USB HID core driver [ 2.297156] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 2.307347] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [BL31]: tee size: 0 [ 2.314298] Driver 'optee' was unable to register with bus_type 'arm_ffa' because the bus was not initialized. [ 2.324860] mmc1: new high speed SDHC card at address 59b4 [ 2.329274] mmcblk1: mmc1:59b4 NCard 7.41 GiB [ 2.334562] mmcblk1: p1 p2 [ 2.401072] Initializing XFRM netlink socket [ 2.401233] NET: Registered PF_INET6 protocol family [ 2.433505] mmc2: mmc_select_hs200 failed, error -74 [ 2.434936] mmc2: new DDR MMC card at address 0001 [ 2.438406] mmcblk2: mmc2:0001 008G70 7.28 GiB [ 2.444722] mmcblk2boot0: mmc2:0001 008G70 4.00 MiB [ 2.448119] mmcblk2boot1: mmc2:0001 008G70 4.00 MiB [ 2.452848] mmcblk2rpmb: mmc2:0001 008G70 4.00 MiB, chardev (236:0) [ 4.881904] Freeing initrd memory: 13220K [ 4.924531] Segment Routing with IPv6 [ 4.924579] RPL Segment Routing with IPv6 [ 4.926628] In-situ OAM (IOAM) with IPv6 [ 4.930591] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.937326] NET: Registered PF_PACKET protocol family [ 4.941351] NET: Registered PF_KEY protocol family [ 4.946219] 8021q: 802.1Q VLAN Support v1.8 [ 4.958932] registered taskstats version 1 [ 4.959216] Loading compiled-in X.509 certificates [ 4.966576] zswap: loaded using pool zstd/zbud [ 4.976505] Key type .fscrypt registered [ 4.976554] Key type fscrypt-provisioning registered [ 4.981091] Btrfs loaded, zoned=no, fsverity=no [ 5.241112] alg: No test for 842 (842-scomp) [ 5.241267] alg: No test for 842 (842-generic) [ 5.253659] "cryptomgr_test" (212) uses obsolete ecb(arc4) skcipher [ 6.168616] meson-drm d0100000.vpu: Queued 2 outputs on vpu [ 6.198404] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 6.203225] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 6.211026] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops) [ 6.218586] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0 [ 6.263267] Console: switching to colour frame buffer device 90x36 [ 6.283889] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device [ 6.291982] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 6.297838] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 6.303909] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 6.310424] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 6.316683] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 6.321857] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 6.329256] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 6.336673] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 6.341853] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 6.348834] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 6.355219] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 6.361085] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 6.366861] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 6.377108] dwc3-meson-g12a d0078080.usb: USB2 ports: 2 [ 6.379969] dwc3-meson-g12a d0078080.usb: USB3 ports: 0 [ 6.911313] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 6.914573] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 6.921798] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM [ 6.930205] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 6.934154] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1 [ 6.941636] xhci-hcd xhci-hcd.3.auto: USB3 root hub has no ports [ 6.947432] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000008002000010 [ 6.956783] xhci-hcd xhci-hcd.3.auto: irq 32, io mem 0xc9000000 [ 6.962914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 6.970818] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.977971] usb usb1: Product: xHCI Host Controller [ 6.982796] usb usb1: Manufacturer: Linux 6.6.43-ophub xhci-hcd [ 6.988656] usb usb1: SerialNumber: xhci-hcd.3.auto [ 6.994013] hub 1-0:1.0: USB hub found [ 6.997221] hub 1-0:1.0: 2 ports detected [ 7.004800] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq [ 7.005452] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware get_d[ 7.025556] clk: Disabling unused clocks [ 7.027369] ALSA device list: [ 7.028880] No soundcards found. [ 7.041104] Freeing unused kernel memory: 6976K [ 7.042778] Run /init as init process [ 7.061698] mmc0: new high speed SDIO card at address 0001 [ 7.780586] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 7.792435] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 7.795709] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 7.801411] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 7.809295] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 7.821315] lima d00c0000.gpu: bus rate = 166666667 [ 7.823117] lima d00c0000.gpu: mod rate = 24000000 [ 7.827227] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found [ 7.837161] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1 done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.38.1 [/sbin/fsck.ext4 (1) -- /dev/mmcblk1p2] fsck.ext4 -y -C0 /dev/mmcblk1p2 e2fsck 1.47.0 (5-Feb-2023) ROOTFS: recovering journal Superblock needs_recovery flag is clear, but journal has data. Run journal anyway? yes fsck.ext4: unable to set superblock flags on ROOTFS ROOTFS: ********** WARNING: Filesystem still has errors ********** fsck exited with status code 12 done. Failure: File system check of the root filesystem failed The root filesystem on /dev/mmcblk1p2 requires a manual fsck

ophub commented 2 weeks ago

这个盒子需要先换个安卓系统，你从首页的设备列表点进去看看

ghp3000 commented 2 weeks ago

盒子线刷了合适的安卓系统. 目前问题已解决,是sd卡坏掉了,无法写入,能读取. so.启动报错是之前sd卡内的文件污染的. 后来换了u盘,能正常启动.