Closed lanyucomputer closed 2 years ago
https://github.com/lanyucomputer/openwrt2022/blob/main/dmesg-zyxq-5.15.35 我不会上传,我发到这里了,你看一下能不能下载,5.17里面有什么黑科技,我们用得到吗?我只想找一个LTS长期支持的内核,5.10和5.15我查都是,所以都可以,当然越新越好,5.17是不是也有可能是LTS版本,我打包了,上传可以了https://github.com/lanyucomputer/openwrt2022/blob/main/dmesg-zyxq-5.15.35.7z
你先看一下,我去洗澡先,回复的话,我一直都在 armbian:~:# armbian-update 5.17.4 Ready to update, please wait... Kernel version: 5.17.4 Start downloading kernel to [ /root ]...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.35-flippy-72+o (root@univm25) (Ubuntu clang version 14.0.0-1ubuntu1, Ubuntu LLD 14.0.0) #107 SMP PREEMPT Wed Apr 20 19:16:15 CST 2022
[ 0.000000] Machine model: Octopus Planet
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000063400000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x0000000077ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 19 pages/cpu s37528 r8192 d32104 u77824
[ 0.000000] pcpu-alloc: s37528 r8192 d32104 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483840
[ 0.000000] Kernel command line: root=UUID=cb6c23db-32f6-4d71-847d-781a8b67f74e rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=B0:D5:9D:F0:7C:00
[ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=B0:D5:9D:F0:7C:00", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1581464K/1966080K available (14720K kernel code, 2650K rwdata, 5728K rodata, 2048K init, 884K bss, 122472K reserved, 262144K cma-reserved)
[ 0.000000] random: get_random_u64 called from kmem_cache_open+0x28/0x53c with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000538] Console: colour dummy device 80x25
[ 0.000956] printk: console [tty0] enabled
[ 0.001024] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.001051] pid_max: default: 32768 minimum: 301
[ 0.001179] LSM: Security Framework initializing
[ 0.001240] SELinux: Initializing.
[ 0.001400] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001427] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.003754] rcu: Hierarchical SRCU implementation.
[ 0.004928] EFI services will not be available.
[ 0.005491] smp: Bringing up secondary CPUs ...
[ 0.006136] Detected VIPT I-cache on CPU1
[ 0.006207] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.006960] Detected VIPT I-cache on CPU2
[ 0.007018] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007672] Detected VIPT I-cache on CPU3
[ 0.007723] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.008410] Detected VIPT I-cache on CPU4
[ 0.008482] CPU4: Booted secondary processor 0x0000000100 [0x410fd034]
[ 0.009146] Detected VIPT I-cache on CPU5
[ 0.009177] CPU5: Booted secondary processor 0x0000000101 [0x410fd034]
[ 0.009807] Detected VIPT I-cache on CPU6
[ 0.009838] CPU6: Booted secondary processor 0x0000000102 [0x410fd034]
[ 0.010498] Detected VIPT I-cache on CPU7
[ 0.010530] CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
[ 0.010627] smp: Brought up 1 node, 8 CPUs
[ 0.010765] SMP: Total of 8 processors activated.
[ 0.010777] CPU features: detected: 32-bit EL0 Support
[ 0.010788] CPU features: detected: 32-bit EL1 Support
[ 0.010802] CPU features: detected: CRC32 instructions
[ 0.011922] CPU: All CPU(s) started at EL2
[ 0.011974] alternatives: patching kernel code
[ 0.014190] devtmpfs: initialized
[ 0.021877] Registered cp15_barrier emulation handler
[ 0.021916] Registered setend emulation handler
[ 0.022069] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.022101] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.032216] prandom: seed boundary self test passed
[ 0.033491] prandom: 100 self tests passed
[ 0.056434] prandom32: self test passed (less than 6 bits correlated)
[ 0.056486] pinctrl core: initialized pinctrl subsystem
[ 0.057094] DMI not present or invalid.
[ 0.057397] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.059721] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.060208] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.060471] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.060569] audit: initializing netlink subsys (disabled)
[ 0.060819] audit: type=2000 audit(0.059:1): state=initialized audit_enabled=0 res=1
[ 0.061895] thermal_sys: Registered thermal governor 'step_wise'
[ 0.062271] cpuidle: using governor ladder
[ 0.062438] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.062654] ASID allocator initialised with 65536 entries
[ 0.062828] Serial: AMBA PL011 UART driver
[ 0.081073] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu
[ 0.085412] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu
[ 0.085716] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx
[ 0.094228] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.094257] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.094273] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.094287] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.780782] cryptd: max_cpu_qlen set to 1000
[ 1.784942] "cryptomgr_test" (118) uses obsolete ecb(arc4) skcipher
[ 1.800054] alg: No test for 842 (842-generic)
[ 1.800317] alg: No test for 842 (842-scomp)
[ 1.908057] DRBG: Continuing without Jitter RNG
[ 1.996433] raid6: neonx8 gen() 2224 MB/s
[ 2.053192] raid6: neonx8 xor() 1602 MB/s
[ 2.109966] raid6: neonx4 gen() 2203 MB/s
[ 2.166714] raid6: neonx4 xor() 1540 MB/s
[ 2.223498] raid6: neonx2 gen() 2043 MB/s
[ 2.280249] raid6: neonx2 xor() 1436 MB/s
[ 2.337017] raid6: neonx1 gen() 1670 MB/s
[ 2.393792] raid6: neonx1 xor() 1174 MB/s
[ 2.450537] raid6: int64x8 gen() 1504 MB/s
[ 2.507287] raid6: int64x8 xor() 800 MB/s
[ 2.564067] raid6: int64x4 gen() 1625 MB/s
[ 2.620813] raid6: int64x4 xor() 821 MB/s
[ 2.677596] raid6: int64x2 gen() 1384 MB/s
[ 2.734344] raid6: int64x2 xor() 740 MB/s
[ 2.791121] raid6: int64x1 gen() 1168 MB/s
[ 2.847877] raid6: int64x1 xor() 583 MB/s
[ 2.847889] raid6: using algorithm neonx8 gen() 2224 MB/s
[ 2.847901] raid6: .... xor() 1602 MB/s, rmw enabled
[ 2.847913] raid6: using neon recovery algorithm
[ 2.848125] fbcon: Taking over console
[ 2.850322] iommu: Default domain type: Translated
[ 2.850351] iommu: DMA domain TLB invalidation policy: strict mode
[ 2.850748] vgaarb: loaded
[ 2.851303] SCSI subsystem initialized
[ 2.851534] usbcore: registered new interface driver usbfs
[ 2.851583] usbcore: registered new interface driver hub
[ 2.851635] usbcore: registered new device driver usb
[ 2.852132] mc: Linux media interface: v0.10
[ 2.852174] videodev: Linux video capture interface: v2.00
[ 2.852456] EDAC MC: Ver: 3.0.0
[ 2.853491] Advanced Linux Sound Architecture Driver Initialized.
[ 2.854818] clocksource: Switched to clocksource arch_sys_counter
[ 2.855120] VFS: Disk quotas dquot_6.6.0
[ 2.855199] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.855351] FS-Cache: Loaded
[ 2.863291] NET: Registered PF_INET protocol family
[ 2.863466] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 2.864705] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 2.864765] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.864978] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 2.865218] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.865493] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 2.865587] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.865643] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.865861] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.865899] NET: Registered PF_XDP protocol family
[ 2.865922] PCI: CLS 0 bytes, default 64
[ 2.866223] Trying to unpack rootfs image as initramfs...
[ 2.879238] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.879776] kvm [1]: IPA Size Limit: 40 bits
[ 2.880884] kvm [1]: vgic interrupt IRQ9
[ 2.881151] kvm [1]: Hyp mode initialized successfully
[ 3.402764] Freeing initrd memory: 7296K
[ 3.630061] Initialise system trusted keyrings
[ 3.630316] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 3.637205] zbud: loaded
[ 3.639190] fuse: init (API version 7.34)
[ 3.639676] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 3.679816] NET: Registered PF_ALG protocol family
[ 3.740374] xor: measuring software checksum speed
[ 3.745203] 8regs : 2051 MB/sec
[ 3.748604] 32regs : 2908 MB/sec
[ 3.753186] arm64_neon : 2155 MB/sec
[ 3.753199] xor: using function: 32regs (2908 MB/sec)
[ 3.753215] Key type asymmetric registered
[ 3.753226] Asymmetric key parser 'x509' registered
[ 3.753351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 3.753516] io scheduler mq-deadline registered
[ 3.753531] io scheduler kyber registered
[ 3.753699] io scheduler bfq registered
[ 3.816081] soc soc0: Amlogic Meson GXM (S912) Revision 22:a (82:2) Detected
[ 3.818489] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 3.820435] Serial: AMBA driver
[ 3.820833] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart
[ 4.858413] printk: console [ttyAML0] enabled
[ 4.872426] brd: module loaded
[ 4.876808] loop: module loaded
[ 4.883610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.884526] ehci-pci: EHCI PCI platform driver
[ 4.888993] ehci-platform: EHCI generic platform driver
[ 4.894718] usbcore: registered new interface driver cdc_wdm
[ 4.899751] usbcore: registered new interface driver usb-storage
[ 4.906182] mousedev: PS/2 mouse device common for all mice
[ 4.911648] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
[ 4.920517] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi
[ 4.926291] meson-vrtc c81000a8.rtc: registered as rtc0
[ 4.930700] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
[ 4.939259] i2c_dev: i2c /dev entries driver
[ 4.945245] Registered IR keymap rc-cec
[ 4.946812] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0
[ 4.955079] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input1
[ 4.967096] Synopsys Designware Multimedia Card Interface Driver
[ 4.971085] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 4.971146] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 4.972253] meson-sm: secure-monitor enabled
[ 4.973970] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.974098] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.980292] hid: raw HID events driver (C) Jiri Kosina
[ 5.004943] usbcore: registered new interface driver usbhid
[ 5.010204] usbhid: USB HID core driver
[ 5.014403] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 5.027719] Initializing XFRM netlink socket
[ 5.028168] gpio irq setup: hwirq: 0x3A irqfirst: 0x34 irqlast: 0x3A pin[48]
[ 5.028332] NET: Registered PF_INET6 protocol family
[ 5.034113] genirq: Setting trigger mode 3 for irq 40 failed (meson_gpio_irq_set_type+0x0/0x140)
[ 5.080814] Segment Routing with IPv6
[ 5.080861] RPL Segment Routing with IPv6
[ 5.082913] In-situ OAM (IOAM) with IPv6
[ 5.086886] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.096206] bpfilter: Loaded bpfilter_umh pid 324
[ 5.097381] NET: Registered PF_PACKET protocol family
[ 5.102327] NET: Registered PF_KEY protocol family
[ 5.107154] 8021q: 802.1Q VLAN Support v1.8
[ 5.111609] registered taskstats version 1
[ 5.115335] Loading compiled-in X.509 certificates
[ 5.125360] zswap: loaded using pool zstd/zbud
[ 5.126045] Key type ._fscrypt registered
[ 5.128319] Key type .fscrypt registered
[ 5.132250] Key type fscrypt-provisioning registered
[ 5.138215] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 5.147590] mmc2: new HS200 MMC card at address 0001
[ 5.149361] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB
[ 5.154737] mmcblk2: p1 p2
[ 5.156603] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB
[ 5.162192] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB
[ 5.166806] mmcblk2rpmb: mmc2:0001 8GTF4R 512 KiB, chardev (240:0)
[ 5.174828] meson-drm d0100000.vpu: Queued 3 outputs on vpu
[ 5.204870] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 5.209615] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 5.217638] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
[ 5.225065] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
[ 5.295604] random: fast init done
[ 5.342732] [drm] kms: can't enable cloning when we probably wanted to.
[ 5.503921] Console: switching to colour frame buffer device 480x135
[ 5.609691] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 5.619395] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 5.623331] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 5.629641] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 5.636457] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 5.642482] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 5.647644] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 5.655060] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 5.662477] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 5.667651] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 5.674638] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 5.681021] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 5.686885] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 5.692664] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 5.703395] dwc3-meson-g12a d0078080.usb: USB2 ports: 3
[ 5.705791] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 5.716317] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 5.718209] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 5.725370] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 5.734258] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 5.737741] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[ 5.745271] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 5.754479] xhci-hcd xhci-hcd.3.auto: irq 42, io mem 0xc9000000
[ 5.760705] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 5.768516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.775638] usb usb1: Product: xHCI Host Controller
[ 5.780467] usb usb1: Manufacturer: Linux 5.15.35-flippy-72+o xhci-hcd
[ 5.786936] usb usb1: SerialNumber: xhci-hcd.3.auto
[ 5.792314] hub 1-0:1.0: USB hub found
[ 5.795510] hub 1-0:1.0: 3 ports detected
[ 5.799880] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 5.805096] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
[ 5.812482] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[ 5.819003] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.827178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 5.835151] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.842309] usb usb2: Product: xHCI Host Controller
[ 5.847138] usb usb2: Manufacturer: Linux 5.15.35-flippy-72+o xhci-hcd
[ 5.853607] usb usb2: SerialNumber: xhci-hcd.3.auto
[ 5.858983] hub 2-0:1.0: USB hub found
[ 5.862180] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 5.872071] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[ 6.055098] usb 1-2: new high-speed USB device number 2 using xhci-hcd
[ 6.116382] ALSA device list:
[ 6.116501] No soundcards found.
[ 6.118254] Freeing unused kernel memory: 2048K
[ 6.121803] Run /init as init process
[ 6.125304] with arguments:
[ 6.125311] /init
[ 6.125316] with environment:
[ 6.125319] HOME=/
[ 6.125323] TERM=linux
[ 6.125327] cgroup_enable=memory
[ 6.125332] cgroup_memory=1
[ 6.125335] mac=B0:D5:9D:F0:7C:00
[ 6.204258] usb 1-2: New USB device found, idVendor=048d, idProduct=1167, bcdDevice= 1.00
[ 6.207607] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.214673] usb 1-2: Product: USB Mass Storage Device
[ 6.219637] usb 1-2: Manufacturer: Yang Wei
[ 6.223779] usb 1-2: SerialNumber: 0000000000000004
[ 6.231580] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 6.236373] scsi host0: usb-storage 1-2:1.0
[ 7.257720] scsi 0:0:0:0: Direct-Access Yang Wei USB Flash Disk 0.00 PQ: 0 ANSI: 2
[ 7.263118] sd 0:0:0:0: [sda] 31776768 512-byte logical blocks: (16.3 GB/15.2 GiB)
[ 7.268492] sd 0:0:0:0: [sda] Write Protect is off
[ 7.272774] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 7.273390] sd 0:0:0:0: [sda] Asking for cache data failed
[ 7.278282] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 7.294395] sda: sda1 sda2
[ 7.315432] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 7.966458] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback. Quota mode: none.
[ 8.898825] systemd[1]: System time before build time, advancing clock.
[ 9.103069] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 9.122985] systemd[1]: Detected architecture arm64.
[ 9.174373] systemd[1]: Set hostname to <armbian>.
[ 11.792699] random: crng init done
[ 13.799054] systemd[1]: Created slice system-modprobe.slice.
[ 13.802663] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 13.808703] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 13.816030] systemd[1]: Created slice User and Session Slice.
[ 13.820248] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[ 13.832472] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.840071] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.848458] systemd[1]: Reached target Local Encrypted Volumes.
[ 13.854061] systemd[1]: Reached target Slices.
[ 13.858261] systemd[1]: Reached target Swap.
[ 13.862435] systemd[1]: Reached target System Time Set.
[ 13.894590] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 13.897638] systemd[1]: Listening on Syslog Socket.
[ 13.903499] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 13.918806] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 13.942162] systemd[1]: Listening on Journal Audit Socket.
[ 13.964719] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.987874] systemd[1]: Listening on Journal Socket.
[ 14.010821] systemd[1]: Listening on udev Control Socket.
[ 14.033674] systemd[1]: Listening on udev Kernel Socket.
[ 14.062384] systemd[1]: Mounting Huge Pages File System...
[ 14.090143] systemd[1]: Mounting POSIX Message Queue File System...
[ 14.117069] systemd[1]: Mounting NFSD configuration filesystem...
[ 14.143880] systemd[1]: Mounting RPC Pipe File System...
[ 14.171543] systemd[1]: Mounting Kernel Debug File System...
[ 14.194344] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 14.194785] RPC: Registered named UNIX socket transport module.
[ 14.207843] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 14.218064] RPC: Registered udp transport module.
[ 14.237833] systemd[1]: Starting Restore / save the current clock...
[ 14.242500] RPC: Registered tcp transport module.
[ 14.242506] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.305643] systemd[1]: Starting Set the console keyboard layout...
[ 14.333136] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 14.348587] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.371335] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 14.378421] systemd[1]: Started Nameserver information manager.
[ 14.409784] systemd[1]: Reached target Network (Pre).
[ 14.435458] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 14.456797] systemd[1]: Starting Load Kernel Modules...
[ 14.484359] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 14.516496] systemd[1]: Starting udev Coldplug all Devices...
[ 14.530594] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 14.560046] systemd[1]: Mounted Huge Pages File System.
[ 14.583621] systemd[1]: Mounted POSIX Message Queue File System.
[ 14.607569] systemd[1]: Mounted NFSD configuration filesystem.
[ 14.632641] systemd[1]: Mounted RPC Pipe File System.
[ 14.658357] systemd[1]: Mounted Kernel Debug File System.
[ 14.686362] systemd[1]: Finished Restore / save the current clock.
[ 14.714649] systemd[1]: Finished Set the console keyboard layout.
[ 14.744991] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 14.780855] systemd[1]: Finished Load Kernel Modules.
[ 14.811345] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 14.848621] systemd[1]: Mounting FUSE Control File System...
[ 14.877319] systemd[1]: Mounting Kernel Configuration File System...
[ 14.909313] systemd[1]: Starting pNFS block layout mapping daemon...
[ 14.936027] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 14.950893] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 14.971009] systemd[1]: Starting Load/Save Random Seed...
[ 14.999812] systemd[1]: Starting Apply Kernel Variables...
[ 15.028702] systemd[1]: Starting Create System Users...
[ 15.057452] systemd[1]: Mounted FUSE Control File System.
[ 15.086019] systemd[1]: Finished udev Coldplug all Devices.
[ 15.111684] systemd[1]: Mounted Kernel Configuration File System.
[ 15.137295] systemd[1]: Started pNFS block layout mapping daemon.
[ 15.164793] systemd[1]: Finished Load/Save Random Seed.
[ 15.194163] systemd[1]: Finished Apply Kernel Variables.
[ 15.236761] systemd[1]: Finished Create System Users.
[ 15.271224] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 15.301256] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 15.349479] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 15.374462] systemd[1]: Reached target Local File Systems (Pre).
[ 15.403899] systemd[1]: Mounting /var/tmp...
[ 15.436068] systemd[1]: Starting udev Kernel Device Manager...
[ 15.464747] systemd[1]: Mounted /var/tmp.
[ 15.549146] [drm] kms: can't enable cloning when we probably wanted to.
[ 15.603658] systemd[1]: Started udev Kernel Device Manager.
[ 15.844289] systemd[1]: Found device /dev/ttyAML0.
[ 15.876422] Registered IR keymap rc-empty
[ 15.878383] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.878605] rc rc1: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1
[ 15.886221] rc rc1: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[ 15.917072] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1/input2
[ 15.971796] meson-ir c8100580.ir: receiver initialized
[ 15.976004] debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
[ 16.002350] debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
[ 16.003139] panfrost d00c0000.gpu: clock rate = 24000000
[ 16.044229] panfrost d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
[ 16.070541] debugfs: File 'HDMITX Capture' in directory 'dapm' already present!
[ 16.087828] panfrost d00c0000.gpu: mali-t820 id 0x820 major 0x1 minor 0x0 status 0x0
[ 16.100321] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.103913] panfrost d00c0000.gpu: features: 00000000,101e76ff, issues: 00000000,24040400
[ 16.136164] panfrost d00c0000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
[ 16.170895] panfrost d00c0000.gpu: shader_present=0x7 l2_present=0x1
[ 16.209323] [drm] Initialized panfrost 1.2.0 20180908 for d00c0000.gpu on minor 1
[ 16.294722] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[ 16.316960] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 16.317600] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 16.317827] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 16.317952] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 16.387548] systemd[1]: Found device /sys/subsystem/net/devices/eth0.
[ 16.700292] systemd[1]: Found device USB_Flash_Disk BOOT.
[ 16.920229] systemd[1]: Starting File System Check on /dev/disk/by-label/BOOT...
[ 16.960598] systemd[1]: Started File System Check Daemon to report status.
[ 17.024210] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 17.133570] systemd[1]: Finished File System Check on /dev/disk/by-label/BOOT.
[ 17.175336] systemd[1]: Mounting /boot...
[ 17.260468] systemd[1]: Mounted /boot.
[ 17.286822] systemd[1]: Reached target Local File Systems.
[ 17.317173] systemd[1]: Starting Armbian ZRAM config...
[ 17.345342] systemd[1]: Starting Set console font and keymap...
[ 17.373780] systemd[1]: Started ifup for eth0.
[ 17.404131] systemd[1]: Starting Raise network interfaces...
[ 17.436345] systemd[1]: Starting Preprocess NFS configuration...
[ 17.467279] systemd[1]: Starting Mark the need to relabel after reboot...
[ 17.498422] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[ 17.515285] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[ 17.532688] systemd[1]: nfs-config.service: Succeeded.
[ 17.546825] systemd[1]: Finished Preprocess NFS configuration.
[ 17.577495] systemd[1]: Finished Mark the need to relabel after reboot.
[ 17.608787] systemd[1]: Starting NFSv4 ID-name mapping service...
[ 17.623684] zram: Added device: zram0
[ 17.625131] zram: Added device: zram1
[ 17.626585] zram: Added device: zram2
[ 17.670590] systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped.
[ 17.686859] systemd[1]: Reached target NFS client services.
[ 17.710145] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
[ 17.765228] systemd[1]: Started NFSv4 ID-name mapping service.
[ 17.895943] zram0: detected capacity change from 0 to 1852952
[ 17.974159] Adding 926472k swap on /dev/zram0. Priority:5 extents:1 across:926472k SSFS
[ 18.160247] zram1: detected capacity change from 0 to 102400
[ 18.201555] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [RTL8211F Gigabit Ethernet] (irq=44)
[ 18.232033] meson8b-dwmac c9410000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 18.254855] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[ 18.268246] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[ 18.281437] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rgmii link mode
[ 18.286083] zram2: detected capacity change from 0 to 1852952
[ 18.409524] EXT4-fs (zram2): mounted filesystem without journal. Opts: discard. Quota mode: none.
[ 18.461243] systemd[1]: Finished Armbian ZRAM config.
[ 18.492160] systemd[1]: Starting Armbian memory supported logging...
[ 18.603662] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none.
[ 18.622864] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[ 20.965126] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 20.995026] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.034227] systemd[1]: Finished Armbian memory supported logging.
[ 22.100482] systemd[1]: Starting Journal Service...
[ 22.391110] systemd[1]: Started Journal Service.
[ 22.461564] systemd-journald[876]: Received client request to flush runtime journal.
[ 37.174828] VDDAO_3V3: disabling
[ 52.011036] NFSD: Using UMH upcall client tracking operations.
[ 52.038848] NFSD: starting 90-second grace period (net f0000000)
armbian:~:# armbian-update 5.17.4 Ready to update, please wait... Kernel version: 5.17.4 Start downloading kernel to [ /root ]... 01.01 The boot file download complete. 01.02 The dtb file download complete. 01.03 The modules file download complete. 01.04 The header file download complete. custom_kernel_name: 5.17.4-flippy-72+ K510 [ 1 ] Unpack [ 5.17.4-flippy-72+ ] related files ... 02.01 Unpack [ boot-5.17.4-flippy-72+.tar.gz ] complete. 02.02 Unpack [ dtb-amlogic-5.17.4-flippy-72+.tar.gz ] complete. 02.03 Unpack [ modules-5.17.4-flippy-72+.tar.gz ] complete. 02.04 Unpack [ header-5.17.4-flippy-72+.tar.gz ] complete. The u-boot-zyxq.bin file copy is complete. Successfully updated, automatic restarting... Connection closing...Socket close.
Connection closed by foreign host.
Disconnected from remote host(10.0.0.113) at 22:01:25.
Type `help' to learn how to use Xshell prompt.
U盘启动后,armbian-update 5.17.4,这里显示Successfully updated,但重启后再也不能从U盘启动了
Welcome to Armbian 22.05.0-trunk Focal with Linux 5.10.112-meson64-dev
No end-user support: built from trunk
System load: 9% Up time: 0 min
Memory usage: 13% of 1.89G IP: 172.17.0.1 10.0.0.203
10.0.0.204
CPU temp: 54°C Usage of /: 26% of 6.4G
[ General system configuration (beta): armbian-config ]
这个IP获取到的太多了,有三个IP了
Welcome to Armbian 22.05.0-trunk Focal with Linux 5.17.4-flippy-72+
No end-user support: built from trunk
System load: 24% Up time: 1 min
Memory usage: 11% of 1.89G IP: 10.0.0.113
10.0.0.112
CPU temp: 54°C Usage of /: 49% of 2.6G
storage/: 39% of 255M
我也不知道是怎么重启了,然后就到了U盘里抽5.17版本了,真是奇怪
armbian-update结束后自动重启。因为换了固件了,所以路由器里看到好几个armbian的mac地址不同的信息,其实就1个ip,其他的都是秒存在了一下就重载过去了。
感谢你的测试,为了和正版区分,这个伪造版专门设置了dtb和固件,取名Octopus Planet(FAKE),安装序号202 以后的固件可以直接安装,已经内置了bootloader和专用dtb 咱们暂时结题关闭这个超长的帖子吧,有问题可以随时回复。
感谢你的测试,为了和正版区分,这个伪造版专门设置了dtb和固件,取名Octopus Planet(FAKE),安装序号202 以后的固件可以直接安装,已经内置了bootloader和专用dtb 咱们暂时结题关闭这个超长的帖子吧,有问题可以随时回复。
我也要谢谢你不厌其烦的帮忙调试,不然我只能用5.30的是吧,现在还有一个问题就是用了好几个DOCKER镜像都好像有问题,用的buddyfly/openwrt-aarch64的镜像也不行,可以启动,但出来的是这样的https://github.com/lanyucomputer/openwrt2022/blob/main/unifreqopenwrtaarch64latest.png ,还有你说的IP问题,它不是一闪就没有了,而是一直都在,我可以同时两个IP同时SSH,还有一个问题是修改不了这个文件用命令 nano /etc/resolv.conf,改是可以改,但重启后不知道为什么就还原了
docker pull lanyucomputer/zyxq:latest 这个docker镜像是我自己用实体镜像打包的,不知道为什么这么大的体积,原版来自这里https://github.com/haiibo/OpenWrt ,我用了几个镜像好像都不正常,我不知道是armbian系统 的问题,还是docker镜像的问题
docker pull lanyucomputer/zyxq:latest 这个进去之后的截图和buddyfly/openwrt-aarch64一样的,不知道是哪里出了问题,docker pull xuanaimai/phicomm-n1,这个可以勉强看到正常一些,但不能科学上网,有很多好像也不是很正常,暂时就测试了这么多
https://github.com/unifreq/openwrt_packit/blob/master/mk_openwrt_dockerimg.sh
flippy 的docker版OpenWrt:unifreq/openwrt-aarch64:latest
我没用过docker版的OpenWrt,但是flippy制作的应该没问题,用户很多,你试试
https://github.com/unifreq/openwrt_packit/blob/master/mk_openwrt_dockerimg.sh
flippy 的docker版OpenWrt:
unifreq/openwrt-aarch64:latest
试过了喔,你看上面有进去之后的图就是这样的https://github.com/lanyucomputer/openwrt2022/blob/main/unifreqopenwrtaarch64latest.png ,就是这样的,不显示型号,是内核 的问题吗?我的内核 太新了?如果说镜像没有问题,那就是我刷 的系统 有问题了??
我没用过docker版的,不知道怎么设置,听说打开网卡混杂模式?恩山应该有很多这种docker跑OpenWrt的帖子。
我没用过docker版的,不知道怎么设置,听说网卡打开网卡混杂模式?恩山应该有很多这种docker跑OpenWrt的帖子。
https://hub.docker.com/r/xuanaimai/onecloud 这里有详细的教程,混杂模式那些我都做了,我以前就是docker openwrt当旁路由,我都用了两年多了,很稳定,我想换一个配置高一点所以才折腾的章鱼
nano /etc/resolv.conf 这个文件为什么不能改呢,我现在用的玩客云可以直接修改,重启也不会还原,现在5.10的改是可以改,但重启自动还原了
No driver support for vblank timestamp query.
No driver support for vblank timestamp query.
what do you mean? which deiver you need? it works very well
章鱼星球刷了这个Armbian_22.05.0_Aml_s912_focal_5.15.35_2022.04.21.0021.img.gz,已经写入EMMC成功,启动不了,启动也没有显示输出,刷入W大的Armbian_5.96_Aml-g12_Debian_buster_default_5.3.0-rc8_20190910,成功启动后可以从EMMC启动,也可以HDMI有显示输出