Closed jbolanosg closed 2 years ago
https://github.com/ophub/amlogic-s9xxx-armbian/issues/79
MECOOL KM3 (S905x2, 4G/64G/100M net) work great with meson-g12a-sei510.dtb. Ethernet/WiFi/BT all work correctly.
What is your configuration? soc? RAM?
79
MECOOL KM3 (S905x2, 4G/64G/100M net) work great with meson-g12a-sei510.dtb. Ethernet/WiFi/BT all work correctly.
What is your configuration? soc? RAM?
https://es.gearbest.com/tv-box/pp_009380849258.html?wid=1433363
79
MECOOL KM3 (S905x2, 4G/64G/100M net) work great with meson-g12a-sei510.dtb. Ethernet/WiFi/BT all work correctly.
What is your configuration? soc? RAM?
The SOC is under the black heat sink, and the NIC chip is next to it. If your device is the link you sent, the default firmware of s905x2 can be used.
Dmesg,
Error that it shows:
20.765724] systemd-journald[941]: Received client request to flush runtime journal.
[ 26.508116] meson8b-dwmac ff3f0000.ethernet eth0: validation of rmii with support 0000000,00000000,00006280 and advertisement 0000000,00000000,00006280 failed: -22
[ 26.528442] meson8b-dwmac ff3f0000.ethernet eth0: no phy at addr -1
[ 26.540074] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[ 26.871298] meson8b-dwmac ff3f0000.ethernet eth0: validation of rmii with support 0000000,00000000,00006280 and advertisement 0000000,00000000,00006280 failed: -22
[ 26.884537] meson8b-dwmac ff3f0000.ethernet eth0: no phy at addr -1
[ 26.890484] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[ 26.971249] meson8b-dwmac ff3f0000.ethernet eth0: validation of rmii with support 0000000,00000000,00006280 and advertisement 0000000,00000000,00006280 failed: -22
[ 26.984577] meson8b-dwmac ff3f0000.ethernet eth0: no phy at addr -1
[ 26.990555] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[ 27.067959] meson8b-dwmac ff3f0000.ethernet eth0: validation of rmii with support 0000000,00000000,00006280 and advertisement 0000000,00000000,00006280 failed: -22
[ 27.081513] meson8b-dwmac ff3f0000.ethernet eth0: no phy at addr -1
[ 27.087453] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[ 27.194560] meson8b-dwmac ff3f0000.ethernet eth0: validation of rmii with support 0000000,00000000,00006280 and advertisement 0000000,00000000,00006280 failed: -22
[ 27.208229] meson8b-dwmac ff3f0000.ethernet eth0: no phy at addr -1
[ 27.214218] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
Maybe your network card has changed the chip, no driver does not support it
Hi, Does Someone have a dtb file that enabled the ethernet network for mecool the km3 tv box? The meson-g12a-sei510.dtb file does not enable the ethernet network card in my mecool km3 tv box.
the speed of the ethernet network card of my mecool km3 is 100 MB.
Thanks.