Closed Cavabanga closed 3 years ago
can not understand what you mean.
What box? What soc? What version of armbian firmware? What phenomenon and screenshots or logs?
I install Armbian_21.11.0_Aml_s905x3_buster_5.4.152_2021.10.11.1600.img.gz on ugoos x3 from USB flash. when this USB flash is connected, it boots up and works fine. when i unplug USB freezes on black screen without anything
This is no problem. You have unplugged the U disk of the armbian system, it must not work. You write to EMMC for use, or always use the USB flash drive.
https://github.com/ophub/amlogic-s9xxx-armbian#install-armbian-to-emmc
but I was doing armbian-install. in this case should work without USB ?
Yes, you don't need a USB flash drive after installing it in EMMC. Unplug the U disk, plug in the power again, and let the system boot from EMMC to use.
when I unplug usb, the system does not boot. the 905x3 logo appears and then a black screen.
ugoos x3 locks bootloader in version v0.3.7 and above
, and prevents writing to EMMC. It can only be used on TF/USB. Yours is this new?
5.10.y can’t, you can write 5.4.y series.
Armbian_21.11.0Amls905x3
buster5.4.152
_2021.10.11.1600.img.gz
Now I have firmware version 0.3.7. I heard that encryption since version 0.3.9. Ok, i will try _s905x3 buster5.4.152.
On 5.4.152 cycle reboot.
And without keyboard
Such a good box can only use TF card, so use it first, maybe someone can change this setting in the future.
Boot only when install media plugging up ( micro SD/USB flash)