ophub
commented
2 years ago 没有
Closed urenai closed 2 years ago
ophub
commented
2 years ago 没有
urenai
commented
2 years ago Device Information | 设备信息
SOC: [S905L3] Model [CM211-1] gxlx2_p291_2g 好像在哪里见过有人刷成功了，不清楚他选的是什么DTB
ophub
commented
2 years ago https://github.com/ophub/amlogic-s9xxx-armbian/issues/118
B860AV2.1和cm211这个好久没人接到了，以前的贴子可以有人反馈成功了。 试试用t95的安装选项：meson-gxl-s905x-p212.dtb 用5.15内核，只改/boot/uEnv.txt
urenai
commented
2 years ago 感谢！！
ophub
commented
2 years ago 测试结果如何
urenai
commented
2 years ago 
引导失败，使用app或者 盒子助手发送adb命令都不行。 我在想，我是不是装错了固件的原因，上图显示固件是cm211-1s，机子是cm211-1
于是我搜索了一下关键信息。发现 https://zhuanlan.zhihu.com/p/461442176?utm_id=0 提到使用ttl可以引导U盘启动。 我现在焊接，等我消息。
urenai
commented
2 years ago GXLX2:BL1:3cfee7:42a5ae;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 99648
BL2 Built : 14:48:45, Sep 26 2018.
gxl g6d68897 - yao.zhang@droid07
Board ID = 4, adc=302
GET GPIO_AO_4 VALUE:16-------
set gpio_ao_4 high
CPU clk: 1200MHz
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 24 00 49 3e 1b 62 24 00 49 3d 1a 60 24 00 48 3d 18 62 27 00 4f 3e 1a 63 579 - PASS
Rank0: 2048MB(auto)-2T-11
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x00007600
Load bl301 from eMMC, src: 0x00018200, des: 0x01380000, size: 0x00002200
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019600
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x00047200
NOTICE: BL3-1: v1.0(debug):521e8c3
NOTICE: BL3-1: Built : 14:22:49, Jun 5 2018
NOTICE: BL31: GXL normal boot!
NOTICE: BL31: BL33 decompress pass
[Image: gxl_v1.1.3103-27cb61a 2018-07-11 13:57:47 xianghua.tan@droid12-sz]
efuse init ops = c5
efuse init hdcp = c, cf9=7
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: 0 0 3 c c 0 d0 b3 68 a0 0 c5 not ES chip
[0.583877 Inits done]
INFO:s BL3-1: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader
ERROR: Error initializing runtime service opteed_fast
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x1000000
INFO: BL3-1: Next image spsr = 0x3c9
rcure task sta
!t
U
D-Bhiogoht ta2s0k1 5s.t0ar1t !(
8eclow 1t7a s2k0 s1t9a r-t !1
:54:18)
DRAM: 2 GiB
Relocation Offset is: 76eef000
gpio: pin GPIODV_24 (gpio 43) value is 1
register usb cfg[0][1] = 0000000077f616b8
[CANVAS]canvas init
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
vpp: vpp_init
MMC: aml_priv->desc_buf = 0x0000000073edfac0
aml_priv->desc_buf = 0x0000000073ee1de0
SDIO Port B: 0, SDIO Port C: 1
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
[mmc_init] mmc init success
dtb magic 08088b1f
Amlogic multi-dtb tool dt_magic = 0x8088b1f
GZIP format, decompress...
DBG: fdt_addr: 0x73f64620
DBG: dt_magic: 0x5f4c4d41
DBG: gzip_format: 1
Multi dtb detected
unified board, board id = 43
Multi dtb tool version: v2 .
Support 10 dtbs.
aml_dt soc: gxlx2 platform: p291 variant: 2g
dtb 0 soc: gxl plat: p211 vari: 1g
dtb 1 soc: gxl plat: p215 vari: 1g
dtb 2 soc: gxl plat: p215 vari: 2g
dtb 3 soc: gxlx plat: p261 vari: 1g
dtb 4 soc: gxlx plat: p261 vari: 2g
dtb 5 soc: gxlx plat: p265 vari: 1g
dtb 6 soc: gxlx plat: p265 vari: 2g
dtb 7 soc: gxlx2 plat: p291 vari: 1g
dtb 8 soc: gxlx2 plat: p291 vari: 2g
dtb 9 soc: gxlx2 plat: p295 vari: 1g
Find match dtb: 8
start dts,buffer=0000000073ee4610,dt_addr=0000000073ee4610
Amlogic multi-dtb tool dt_magic = 0xedfe0dd0
DBG: fdt_addr: 0x73ee4610
DBG: dt_magic: 0xedfe0dd0
DBG: gzip_format: 0
Single dtb detected
parts: 12
00: logo 0000000002000000 1
01: recovery 0000000002000000 1
02: rsv 0000000000800000 1
03: tee 0000000000800000 1
04: crypt 0000000002000000 1
05: misc 0000000002000000 1
06: boot 0000000002000000 1
07: system 0000000040000000 1
08: cache 0000000020000000 2
09: params 0000000004000000 2
10: bootfiles 0000000020000000 2
11: data ffffffffffffffff 4
eMMC/TSD partition table have been checked OK!
check pattern success
mmc env offset: 0x27400000
In: serial
Out: serial
Err: serial
board id is : 43
hpd_state=1
[1080p60hz] is invalid for cvbs.
set hdmitx VIC = 16
config HPLL = 2970
HPLL: 0xc000027b
config HPLL done
j = 4 vid_clk_div = 1
hdmitx: set enc for VIC: 16
HDMITX-DWC addr=0x10004006 rd_data=0x40
Error: HDMITX-DWC exp_data=0xff mask=0x9f
hdmitx phy setting done
div40 = 0
hdmtix: set audio
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-924: calc 7412e6db, store 7412e6db
_verify_dtb_checksum()-924: calc 7412e6db, store 7412e6db
dtb_read()-1046: total valid 2
dtb_read()-1113: do nothing
Amlogic multi-dtb tool dt_magic = 0x8088b1f
GZIP format, decompress...
DBG: fdt_addr: 0x73efc320
DBG: dt_magic: 0x5f4c4d41
DBG: gzip_format: 1
Multi dtb detected
unified board, board id = 43
Multi dtb tool version: v2 .
Support 10 dtbs.
aml_dt soc: gxlx2 platform: p291 variant: 2g
dtb 0 soc: gxl plat: p211 vari: 1g
dtb 1 soc: gxl plat: p215 vari: 1g
dtb 2 soc: gxl plat: p215 vari: 2g
dtb 3 soc: gxlx plat: p261 vari: 1g
dtb 4 soc: gxlx plat: p261 vari: 2g
dtb 5 soc: gxlx plat: p265 vari: 1g
dtb 6 soc: gxlx plat: p265 vari: 2g
dtb 7 soc: gxlx2 plat: p291 vari: 1g
dtb 8 soc: gxlx2 plat: p291 vari: 2g
dtb 9 soc: gxlx2 plat: p295 vari: 1g
Find match dtb: 8
wipe_data=successful
wipe_cache=successful
bmp pixel: 16
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[CANVAS]addr=0x3dc00000 width=3840, height=2160
upgrade_step=2
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[keymanage_dts_get_key_device]L85:model key name is not exist
[KM]Error:f[_get_km_ops_by_name]L231:key model not know device 4
[KM]Error:f[key_manage_query_exist]L546:There isn't dts cfg for key[model]
[KM]Error:f[key_manage_query_size]L503:Fail in query key exist
gpio: pin GPIOAO_2 (gpio 102) value is 1
rebootmode=cold_boot
Enter USB burn
Try connect time out 701, 700, 875
key1 = e31cff00
key2 = e817ff00
key3 = e817ff00
time_out = 7a120
ir init
irkey - irkey key_value1 key_value2 key_value3 time_value
Usage:
irkey
Hit any key to stop autoboot: 0
card out
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
(Re)start USB...
USB0: USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
reading s905_autoscript
1654 bytes read in 47 ms (34.2 KiB/s)
## Executing script at 01020000
start amlogic old u-boot
## Error: "bootfromsd" not defined
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
** Bad device mmc 0 **
reading boot_android
** Unable to read file boot_android **
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
** Bad device mmc 0 **
reading u-boot.ext
** Unable to read file u-boot.ext **
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
** Bad device mmc 0 **
start test usb
reading uEnv.txt
357 bytes read in 42 ms (7.8 KiB/s)
mac=00:69:2D:9D:A8:76
reading /zImage
25336320 bytes read in 13526 ms (1.8 MiB/s)
reading /uInitrd
8197224 bytes read in 4462 ms (1.8 MiB/s)
reading /dtb/amlogic/meson-gxl-s905x-p212.dtb
39209 bytes read in 364 ms (104.5 KiB/s)
## Error: "aadmac" not defined
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
[rsvmem] bl31 reserved memory set addr error.
## Loading init Ramdisk from Legacy Image at 13000000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 8197160 Bytes = 7.8 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Amlogic multi-dtb tool dt_magic = 0xedfe0dd0
DBG: fdt_addr: 0x1000000
DBG: dt_magic: 0xedfe0dd0
DBG: gzip_format: 0
Single dtb detected
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
[rsvmem] bl31 reserved memory set addr error.
Loading Ramdisk to 7370b000, end 73edc428 ... OK
Loading Device Tree to 000000000fff3000, end 000000000ffff928 ... OK
fdt_instaboot: get header err
Starting kernel ...
uboot time: 24904736 us
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.80-flippy-79+o (root@univm25) (Ubuntu clang versi on 14.0.0-1ubuntu1, Ubuntu LLD 14.0.0) #193 SMP PREEMPT Sat Nov 26 20:38:02 CST 202 2
[ 0.000000] Machine model: Amlogic Meson GXL (S905X) P212 Development Board
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000063400000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-d ma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x0000000077ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 19 pages/cpu s37720 r8192 d31912 u77824
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483840
[ 0.000000] Kernel command line: root=UUID=8aa075c0-0156-4c09-a2f9-1846758a3a3a rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 n o_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_ enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=00:69:2D:9D:A8 :76
[ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_ memory=1 mac=00:69:2D:9D:A8:76", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, li near)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, lin ear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1581596K/1966080K available (15232K kernel code, 2726K rwdat a, 4704K rodata, 1984K init, 887K bss, 122340K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffie s.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x 588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980465 11097ns
[ 0.000593] Console: colour dummy device 80x25
[ 0.001018] printk: console [tty0] enabled
[ 0.001079] Calibrating delay loop (skipped), value calculated using timer frequ ency.. 48.00 BogoMIPS (lpj=80000)
[ 0.001104] pid_max: default: 32768 minimum: 301
[ 0.001304] LSM: Security Framework initializing
[ 0.001417] SELinux: Initializing.
[ 0.001678] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001705] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, li near)
[ 0.003955] rcu: Hierarchical SRCU implementation.
[ 0.005155] EFI services will not be available.
[ 0.005613] smp: Bringing up secondary CPUs ...
[ 0.006282] Detected VIPT I-cache on CPU1
[ 0.006352] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007117] Detected VIPT I-cache on CPU2
[ 0.007175] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007874] Detected VIPT I-cache on CPU3
[ 0.007928] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.008015] smp: Brought up 1 node, 4 CPUs
[ 0.008089] SMP: Total of 4 processors activated.
[ 0.008101] CPU features: detected: 32-bit EL0 Support
[ 0.008112] CPU features: detected: 32-bit EL1 Support
[ 0.008126] CPU features: detected: CRC32 instructions
[ 0.008981] CPU: All CPU(s) started at EL2
[ 0.009013] alternatives: patching kernel code
[ 0.010937] devtmpfs: initialized
[ 0.018897] Registered cp15_barrier emulation handler
[ 0.018937] Registered setend emulation handler
[ 0.019102] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 6370867519511994 ns
[ 0.019133] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.025757] prandom: seed boundary self test passed
[ 0.026986] prandom: 100 self tests passed
[ 0.049930] prandom32: self test passed (less than 6 bits correlated)
[ 0.049985] pinctrl core: initialized pinctrl subsystem
[ 0.050667] DMI not present or invalid.
[ 0.051177] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.053277] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.053558] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocat ions
[ 0.053765] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic alloc ations
[ 0.053862] audit: initializing netlink subsys (disabled)
[ 0.054144] audit: type=2000 audit(0.053:1): state=initialized audit_enabled=0 r es=1
[ 0.055270] thermal_sys: Registered thermal governor 'step_wise'
[ 0.055589] cpuidle: using governor ladder
[ 0.055774] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.055904] ASID allocator initialised with 65536 entries
[ 0.056090] Serial: AMBA PL011 UART driver
[ 0.075726] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000 .vpu
[ 0.079792] platform cvbs-connector: Fixing up cyclic dependency with d0100000.v pu
[ 0.080078] platform hdmi-connector: Fixing up cyclic dependency with c883a000.h dmi-tx
[ 0.088722] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.088760] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.088775] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.088790] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.496053] cryptd: max_cpu_qlen set to 1000
[ 1.499971] "cryptomgr_test" (91) uses obsolete ecb(arc4) skcipher
[ 1.512340] alg: No test for 842 (842-generic)
[ 1.512505] alg: No test for 842 (842-scomp)
[ 1.603584] DRBG: Continuing without Jitter RNG
[ 1.686073] raid6: neonx8 gen() 2225 MB/s
[ 1.742808] raid6: neonx8 xor() 1602 MB/s
[ 1.799549] raid6: neonx4 gen() 2206 MB/s
[ 1.856284] raid6: neonx4 xor() 1536 MB/s
[ 1.913022] raid6: neonx2 gen() 2046 MB/s
[ 1.969763] raid6: neonx2 xor() 1434 MB/s
[ 2.026493] raid6: neonx1 gen() 1665 MB/s
[ 2.083233] raid6: neonx1 xor() 1175 MB/s
[ 2.139983] raid6: int64x8 gen() 1507 MB/s
[ 2.196715] raid6: int64x8 xor() 802 MB/s
[ 2.253445] raid6: int64x4 gen() 1626 MB/s
[ 2.310185] raid6: int64x4 xor() 823 MB/s
[ 2.366940] raid6: int64x2 gen() 1389 MB/s
[ 2.423658] raid6: int64x2 xor() 740 MB/s
[ 2.480400] raid6: int64x1 gen() 1171 MB/s
[ 2.537129] raid6: int64x1 xor() 582 MB/s
[ 2.537141] raid6: using algorithm neonx8 gen() 2225 MB/s
[ 2.537153] raid6: .... xor() 1602 MB/s, rmw enabled
[ 2.537165] raid6: using neon recovery algorithm
[ 2.537476] fbcon: Taking over console
[ 2.537521] ACPI: Interpreter disabled.
[ 2.539676] iommu: Default domain type: Translated
[ 2.539709] iommu: DMA domain TLB invalidation policy: strict mode
[ 2.540131] vgaarb: loaded
[ 2.540769] SCSI subsystem initialized
[ 2.541019] usbcore: registered new interface driver usbfs
[ 2.541067] usbcore: registered new interface driver hub
[ 2.541113] usbcore: registered new device driver usb
[ 2.541609] mc: Linux media interface: v0.10
[ 2.541643] videodev: Linux video capture interface: v2.00
[ 2.541920] EDAC MC: Ver: 3.0.0
[ 2.543087] Advanced Linux Sound Architecture Driver Initialized.
[ 2.544220] clocksource: Switched to clocksource arch_sys_counter
[ 2.544575] VFS: Disk quotas dquot_6.6.0
[ 2.544668] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.544838] FS-Cache: Loaded
[ 2.545344] pnp: PnP ACPI: disabled
[ 2.552592] NET: Registered PF_INET protocol family
[ 2.552796] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 2.554075] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 b ytes, linear)
[ 2.554136] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, lin ear)
[ 2.554162] TCP established hash table entries: 16384 (order: 5, 131072 bytes, l inear)
[ 2.554363] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 2.554600] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.554867] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 2.554981] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.555036] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.555239] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.555277] NET: Registered PF_XDP protocol family
[ 2.555299] PCI: CLS 0 bytes, default 64
[ 2.555578] Trying to unpack rootfs image as initramfs...
[ 2.568343] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.568869] kvm [1]: IPA Size Limit: 40 bits
[ 2.569751] kvm [1]: vgic interrupt IRQ9
[ 2.569923] kvm [1]: Hyp mode initialized successfully
[ 3.153297] Freeing initrd memory: 8004K
[ 3.378870] Initialise system trusted keyrings
[ 3.379158] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 3.386333] zbud: loaded
[ 3.388082] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.388654] fuse: init (API version 7.34)
[ 3.389219] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 3.429671] NET: Registered PF_ALG protocol family
[ 3.480118] xor: measuring software checksum speed
[ 3.484970] 8regs : 2051 MB/sec
[ 3.488380] 32regs : 2908 MB/sec
[ 3.492966] arm64_neon : 2153 MB/sec
[ 3.492978] xor: using function: 32regs (2908 MB/sec)
[ 3.492995] Key type asymmetric registered
[ 3.493006] Asymmetric key parser 'x509' registered
[ 3.493152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 3.493356] io scheduler mq-deadline registered
[ 3.493372] io scheduler kyber registered
[ 3.493552] io scheduler bfq registered
[ 3.520291] soc soc0: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2) Detec ted
[ 3.522790] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 3.525029] Serial: AMBA driver
[ 3.525503] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 20, base_baud = 1 500000) is a meson_uart
[ 3.525710] serial serial0: tty port ttyAML6 registered
[ 3.526307] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 23, base_baud = 1 500000) is a meson_uart
[ 4.565621] printk: console [ttyAML0] enabled
[ 4.579919] brd: module loaded
[ 4.584689] loop: module loaded
[ 4.591969] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.592888] ehci-pci: EHCI PCI platform driver
[ 4.597356] ehci-platform: EHCI generic platform driver
[ 4.603081] usbcore: registered new interface driver cdc_wdm
[ 4.608143] usbcore: registered new interface driver usb-storage
[ 4.614651] mousedev: PS/2 mouse device common for all mice
[ 4.620762] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi
[ 4.626912] meson-vrtc c81000a8.rtc: registered as rtc0
[ 4.631212] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
[ 4.639804] i2c_dev: i2c /dev entries driver
[ 4.645727] Registered IR keymap rc-cec
[ 4.647358] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100. cec/rc/rc0
[ 4.655597] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.c ec/rc/rc0/input0
[ 4.667908] sdhci: Secure Digital Host Controller Interface driver
[ 4.670243] sdhci: Copyright(c) Pierre Ossman
[ 4.674576] Synopsys Designware Multimedia Card Interface Driver
[ 4.681690] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.682022] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 4.682273] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 4.689131] meson-sm: secure-monitor enabled
[ 4.703034] gxl-crypto c883e000.crypto: will run requests pump with realtime pri ority
[ 4.708526] gxl-crypto c883e000.crypto: will run requests pump with realtime pri ority
[ 4.720110] hid: raw HID events driver (C) Jiri Kosina
[ 4.721366] usbcore: registered new interface driver usbhid
[ 4.726870] usbhid: USB HID core driver
[ 4.726925] gpio irq setup: hwirq: 0x3A irqfirst: 0x34 irqlast: 0x3A pin[48]
[ 4.731268] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 4.737857] genirq: Setting trigger mode 3 for irq 49 failed (meson_gpBo_irq_see etyize:x0/0x140)
[ 4.755972] Initializing XFRM netlink socket
[ 4.757923] NET: Registered PF_INET6 protocol family
[ 4.800014] Segment Routing with IPv6
[ 4.800061] RPL Segment Routing with IPv6
[ 4.802137] In-situ OAM (IOAM) with IPv6
[ 4.806109] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.815247] bpfilter: Loaded bpfilter_umh pid 303
[ 4.816514] NET: Registered PF_PACKET protocol family
[ 4.821537] NET: Registered PF_KEY protocol family
[ 4.826522] 8021q: 802.1Q VLAN Support v1.8
[ 4.831103] registered taskstats version 1
[ 4.834589] Loading compiled-in X.509 certificates
[ 4.841843] zswap: loaded using pool zstd/zbud
[ 4.844149] Key type .fscrypt registered
[ 4.847434] Key type fscrypt-provisioning registered
[ 4.853388] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 4.873823] mmc2: new HS200 MMC card at address 0001
[ 4.874896] mmcblk2: mmc2:0001 Biwin 6.96 GiB
[ 4.880448] mmcblk2boot0: mmc2:0001 Biwin 4.00 MiB
[ 4.884369] mmcblk2boot1: mmc2:0001 Biwin 4.00 MiB
[ 4.888850] mmcblk2rpmb: mmc2:0001 Biwin 4.00 MiB, chardev (240:0)
[ 4.893198] meson-drm d0100000.vpu: Queued 3 outputs on vpu
[ 4.927617] meson-dw-hdmi c883a000.hdmi-tx: Unsupported HDMI controller (0d0d:0d :0d)
[ 4.930132] meson-drm d0100000.vpu: failed to bind c883a000.hdmi-tx (ops 0xfffff fc00a2e8450): -19
[ 4.938550] meson-drm d0100000.vpu: Couldn't bind all components
[ 4.944779] meson-drm d0100000.vpu: master bind failed: -19
[ 4.952346] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 4.956580] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 4.962859] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 4.969689] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 4.975730] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 4.980995] meson8b-dwmac c9410000.ethernet: DMA HW capability register supporte d
[ 4.988307] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supporte d
[ 4.995723] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 5.000897] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 5.007882] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 5.014265] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 5.020130] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 5.025909] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdo g Timer
[ 5.033857] meson8b-dwmac c9410000.ethernet: device MAC address 76:e1:ad:15:b7:3 2
[ 5.044583] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 5.046432] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 5.575514] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 5.577200] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 5.584415] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 5.593394] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.596791] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus numbe r 1
[ 5.604297] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f664 hci version 0x100 qu irks 0x0000000002010010
[ 5.613480] xhci-hcd xhci-hcd.1.auto: irq 51, io mem 0xc9000000
[ 5.619524] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.624929] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus numbe r 2
[ 5.632328] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 5.638948] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDe vice= 5.15
[ 5.646979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.654137] usb usb1: Product: xHCI Host Controller
[ 5.658967] usb usb1: Manufacturer: Linux 5.15.80-flippy-79+o xhci-hcd
[ 5.665435] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 5.670811] hub 1-0:1.0: USB hub found
[ 5.674013] hub 1-0:1.0: 2 ports detected
[ 5.678419] usb usb2: We don't know the algorithms for LPM for this host, disabl ing LPM.
[ 5.686092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDe vice= 5.15
[ 5.694158] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.701410] usb usb2: Product: xHCI Host Controller
[ 5.706147] usb usb2: Manufacturer: Linux 5.15.80-flippy-79+o xhci-hcd
[ 5.712614] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 5.718037] hub 2-0:1.0: USB hub found
[ 5.721193] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 5.732388] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[ 5.732955] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
get_dvfs_info 002b
[ 5.770102] ALSA device list:
[ 5.770146] No soundcards found.
[ 5.772063] Freeing unused kernel memory: 1984K
[ 5.787622] Run /init as init process
[ 5.796724] mmc0: new high speed SDIO card at address 0001
[ 5.934254] usb 1-2: new high-speed USB device number 2 using xhci-hcd
[ 6.078951] usb 1-2: New USB device found, idVendor=090c, idProduct=1100, bcdDev ice=11.00
[ 6.081556] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.088632] usb 1-2: Product: Teclast CoolFlash
[ 6.093504] usb 1-2: Manufacturer: Generic
[ 6.099597] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 6.104664] scsi host0: usb-storage 1-2:1.0
[ 7.680380] scsi 0:0:0:0: Direct-Access Teclast CoolFlash 1100 PQ: 0 ANSI: 4
[ 7.686940] sd 0:0:0:0: [sda] 31129600 512-byte logical blocks: (15.9 GB/14.8 Gi B)
[ 7.691851] sd 0:0:0:0: [sda] Write Protect is off
[ 7.696194] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.713684] sda: sda1 sda2
[ 7.718951] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 15.168243] EXT4-fs (sda2): recovery complete
[ 15.173363] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: d ata=writeback. Quota mode: none.
[ 15.961827] systemd[1]: System time before build time, advancing clock.
[ 16.124335] systemd[1]: systemd 249.11-0ubuntu3.6 running in system mode (+PAM + AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQU ALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT defa ult-hierarchy=unified)
[ 16.151601] systemd[1]: Detected architecture arm64.
[ 16.157137] systemd[1]: Detected first boot.
[ 16.163648] systemd[1]: Hostname set to <armbian>.
[ 16.193467] random: systemd: uninitialized urandom read (16 bytes read)
[ 16.194806] systemd[1]: Initializing machine ID from random generator.
[ 18.364954] systemd[1]: Populated /etc with preset unit settings.
[ 18.768639] systemd[1]: Queued start job for default target Graphical Interface.
[ 18.772410] random: systemd: uninitialized urandom read (16 bytes read)
[ 18.781347] systemd[1]: Created slice Slice /system/modprobe.
[ 18.783332] random: systemd: uninitialized urandom read (16 bytes read)
[ 18.791380] systemd[1]: Created slice Slice /system/serial-getty.
[ 18.795714] random: systemd: uninitialized urandom read (16 bytes read)
[ 18.804325] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 18.809653] systemd[1]: Created slice User and Session Slice.
[ 18.814592] systemd[1]: Started Forward Password Requests to Wall Directory Watc h.
[ 18.822597] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 18.831557] systemd[1]: Reached target Slice Units.
[ 18.835695] systemd[1]: Reached target Swaps.
[ 18.839919] systemd[1]: Reached target System Time Set.
[ 18.845388] systemd[1]: Reached target Local Verity Protected Volumes.
[ 18.871756] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 18.873928] systemd[1]: Listening on Syslog Socket.
[ 18.886917] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 18.888918] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 18.896134] systemd[1]: Listening on Journal Audit Socket.
[ 18.901218] systemd[1]: Listening on Journal Socket (/dev/log).
[ 18.907192] systemd[1]: Listening on Journal Socket.
[ 18.911656] systemd[1]: systemd-networkd.socket: Socket service systemd-networkd .service not loaded, refusing.
[ 18.920708] systemd[1]: Failed to listen on Network Service Netlink Socket.
[ 18.929139] systemd[1]: Listening on udev Control Socket.
[ 18.934087] systemd[1]: Listening on udev Kernel Socket.
[ 18.943238] systemd[1]: Mounting Huge Pages File System...
[ 18.948834] systemd[1]: Mounting POSIX Message Queue File System...
[ 18.955379] systemd[1]: Mounting Kernel Debug File System...
[ 18.956438] systemd[1]: Condition check resulted in Kernel Trace File System bei ng skipped.
[ 18.964630] systemd[1]: Condition check resulted in Kernel Module supporting RPC SEC_GSS being skipped.
[ 18.980031] systemd[1]: Starting Restore / save the current clock...
[ 18.986583] systemd[1]: Starting Wait for network to be configured by ifupdown.. .
[ 19.013938] systemd[1]: Starting Set the console keyboard layout...
[ 19.020741] systemd[1]: Starting Create List of Static Device Nodes...
[ 19.028688] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[ 19.036410] systemd[1]: Starting Load Kernel Module configfs...
[ 19.044431] systemd[1]: Starting Load Kernel Module drm...
[ 19.047900] random: crng init done
[ 19.047954] random: 27 urandom warning(s) missed due to ratelimiting
[ 19.053079] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 19.066334] systemd[1]: Starting Load Kernel Module fuse...
[ 19.073374] systemd[1]: Starting Load Kernel Module pstore_blk...
[ 19.080498] systemd[1]: Starting Load Kernel Module pstore_zone...
[ 19.087509] systemd[1]: Starting Load Kernel Module ramoops...
[ 19.094951] systemd[1]: Started Nameserver information manager.
[ 19.108029] systemd[1]: Condition check resulted in File System Check on Root De vice being skipped.
[ 19.129001] systemd[1]: Starting Load Kernel Modules...
[ 19.134650] systemd[1]: Starting Generate network units from Kernel command line ...
[ 19.142761] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 19.150604] systemd[1]: Starting Coldplug All udev Devices...
[ 19.167952] systemd[1]: Mounted Huge Pages File System.
[ 19.169497] systemd[1]: Mounted POSIX Message Queue File System.
[ 19.174718] systemd[1]: Mounted Kernel Debug File System.
[ 19.182351] systemd[1]: Finished Restore / save the current clock.
[ 19.187804] systemd[1]: Finished Create List of Static Device Nodes.
[ 19.193401] systemd[1]: modprobe@chromeos_pstore.service: Deactivated successful ly.
[ 19.195113] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: non e.
[ 19.201315] systemd[1]: Finished Load Kernel Module chromeos_pstore.
[ 19.218855] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 19.221818] systemd[1]: Finished Load Kernel Module configfs.
[ 19.228414] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 19.234872] systemd[1]: Finished Load Kernel Module drm.
[ 19.239888] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 19.246634] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 19.252714] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 19.259609] systemd[1]: Finished Load Kernel Module fuse.
[ 19.265235] systemd[1]: modprobe@pstore_blk.service: Deactivated successfully.
[ 19.271634] systemd[1]: Finished Load Kernel Module pstore_blk.
[ 19.278040] systemd[1]: modprobe@pstore_zone.service: Deactivated successfully.
[ 19.285133] systemd[1]: Finished Load Kernel Module pstore_zone.
[ 19.291524] systemd[1]: modprobe@ramoops.service: Deactivated successfully.
[ 19.297604] systemd[1]: Finished Load Kernel Module ramoops.
[ 19.306014] systemd[1]: Finished Load Kernel Modules.
[ 19.309393] systemd[1]: Finished Generate network units from Kernel command line .
[ 19.316422] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 19.322455] systemd[1]: Reached target Preparation for Network.
[ 19.332047] systemd[1]: Mounting FUSE Control File System...
[ 19.337414] systemd[1]: Mounting Kernel Configuration File System...
[ 19.339144] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 19.353080] systemd[1]: Starting Load/Save Random Seed...
[ 19.358776] systemd[1]: Starting Apply Kernel Variables...
[ 19.365005] systemd[1]: Starting Create System Users...
[ 19.370750] systemd[1]: Mounted FUSE Control File System.
[ 19.371918] systemd[1]: Mounted Kernel Configuration File System.
[ 19.392131] systemd[1]: Finished Set the console keyboard layout.
[ 19.480038] systemd[1]: Finished Load/Save Random Seed.
[ 19.481368] systemd[1]: Reached target First Boot Complete.
[ 19.509036] systemd[1]: Finished Create System Users.
[ 19.515210] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 19.539124] systemd[1]: Finished Apply Kernel Variables.
[ 19.589258] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 19.590994] systemd[1]: Reached target Preparation for Local File Systems.
[ 19.603468] systemd[1]: Mounting /tmp...
[ 19.612862] systemd[1]: Starting Rule-based Manager for Device Events and Files. ..
[ 19.619677] systemd[1]: Mounted /tmp.
[ 19.677507] systemd[1]: Finished Coldplug All udev Devices.
[ 19.684539] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 19.848880] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ 19.851899] systemd[1]: Condition check resulted in Show Plymouth Boot Screen be ing skipped.
[ 19.859315] systemd[1]: Condition check resulted in Dispatch Password Requests t o Console Directory Watch when bootsplash is active being skipped.
[ 19.872325] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped.
[ 19.883078] systemd[1]: Reached target Local Encrypted Volumes.
[ 20.182364] systemd[1]: Found device /dev/ttyAML0.
[ 20.241372] Registered IR keymap rc-empty
[ 20.257852] rc rc1: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/r c/rc1
[ 20.274170] rc rc1: lirc_dev: driver meson-ir registered at minor = 0, raw IR re ceiver, no transmitter
[ 20.279631] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc /rc1/input1
[ 20.291088] meson-ir c8100580.ir: receiver initialized
[ 20.346568] systemd[1]: Reached target Hardware activated USB gadget.
[ 20.402898] meson_vdec: module is from the staging directory, the quality is unk nown, you have been warned.
[ 20.454807] SError Interrupt on CPU2, code 0xbf000002 -- SError
[ 20.454821] CPU: 2 PID: 488 Comm: systemd-udevd Tainted: G C 5.15 .80-flippy-79+o #193
[ 20.454830] Hardware name: Amlogic Meson GXL (S905X) P212 Development Board (DT)
[ 20.454835] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 20.454843] pc : local_daif_inherit+0x24/0x64
[ 20.454860] lr : el1_abort+0x2c/0x5c
[ 20.454870] sp : ffffffc00834b6e0
[ 20.454872] x29: ffffffc00834b6e0 x28: ffffff80036fc600 x27: ffffff8008fca100
[ 20.454885] x26: 0000000000000000 x25: ffffffc00200c1b8 x24: 0000000000000001
[ 20.454895] x23: 0000000080000005 x22: ffffffc002004c84 x21: ffffffc008606000
[ 20.454904] x20: ffffffc00834b720 x19: 0000000096000210 x18: ffffffc00a1b71bc
[ 20.454913] x17: 0000000000000245 x16: 00000000000000cc x15: 0000000000000000
[ 20.454922] x14: 00000000000000a9 x13: 0000000000000000 x12: 0000000000000004
[ 20.454931] x11: 000000000000002c x10: ffffffc009f4984c x9 : ffffffc00a19d984
[ 20.454940] x8 : 0000000000000000 x7 : 717164736d6821ff x6 : 80225a21325f5200
[ 20.454949] x5 : 00525f32215a2200 x4 : 0000000000000080 x3 : ffffffc00834b6dc
[ 20.454958] x2 : 0000000096000210 x1 : 0000000096000210 x0 : ffffffc00834b720
[ 20.454969] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 20.454973] CPU: 2 PID: 488 Comm: systemd-udevd Tainted: G C 5.15 .80-flippy-79+o #193
[ 20.454980] Hardware name: Amlogic Meson GXL (S905X) P212 Development Board (DT)
[ 20.454984] Call trace:
[ 20.454986] dump_backtrace+0x0/0x1ec
[ 20.454997] dump_stack_lvl+0x74/0xb0
[ 20.455006] panic+0x14c/0x35c
[ 20.455015] nmi_panic+0x70/0x74
[ 20.455022] arm64_serror_panic+0x60/0x6c
[ 20.455027] do_serror+0xd4/0xf4
[ 20.455032] el1h_64_error_handler+0x34/0x48
[ 20.455040] el1h_64_error+0x78/0x7c
[ 20.455047] local_daif_inherit+0x24/0x64
[ 20.455053] el1h_64_sync_handler+0x5c/0x98
[ 20.455060] el1h_64_sync+0x78/0x7c
[ 20.455066] lima_mmu_init+0x48/0x118 [lima]
[ 20.455124] lima_device_init+0x204/0x564 [lima]
[ 20.455170] lima_pdev_probe+0x90/0x17c [lima]
[ 20.455214] platform_probe+0xa8/0xd0
[ 20.455223] call_driver_probe+0x38/0x110
[ 20.455231] really_probe+0xc4/0x34c
[ 20.455237] __driver_probe_device+0x114/0x17c
[ 20.455243] driver_probe_device+0x44/0x1ec
[ 20.455250] __driver_attach.llvm.2617487977940390934+0xf0/0x248
[ 20.455256] bus_add_driver+0x160/0x28c
[ 20.455265] driver_register+0x78/0x114
[ 20.455271] __platform_driver_register+0x24/0x30
[ 20.455278] init_module+0x20/0xff4 [lima]
[ 20.455324] do_one_initcall+0xa8/0x20c
[ 20.455334] do_init_module+0x44/0x2f4
[ 20.455343] load_module+0x10cc/0x126c
[ 20.455351] __se_sys_finit_module+0xbc/0x124
[ 20.455357] __arm64_sys_finit_module+0x1c/0x28
[ 20.455364] invoke_syscall+0x40/0x100
[ 20.455373] el0_svc_common.llvm.4206774317640792181+0x90/0x188
[ 20.455380] do_el0_svc+0x24/0x78
[ 20.455387] el0_svc+0x20/0x78
[ 20.455395] el0t_64_sync_handler+0x84/0xe4
[ 20.455401] el0t_64_sync+0x1a0/0x1a4
[ 20.455409] SMP: stopping secondary CPUs
[ 20.455423] Kernel Offset: disabled
[ 20.455426] CPU features: 0x00002001,00000846
[ 20.455432] Memory Limit: none
[ 20.739404] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ] ---
内核恐恐，u盘测试，试试添加uboot
cd /boot
cp -f u-boot-s905x-s912.bin u-boot.ext
sync && rebootGXLX2:BL1:3cfee7:42a5ae;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 98866
BL2 Built : 14:48:45, Sep 26 2018.
gxl g6d68897 - yao.zhang@droid07
Board ID = 4, adc=302
set vcck to 1070 mv
set vddee to 1070 mv
sunniwell 4L/8bit_ddr board
CPU clk: 1200MHz
DDR3
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 26 00 4c 3e 1b 61 24 00 49 3c 19 60 23 00 47 3c 17 62 28 01 4f 3e 18 64 579 - PASS
Rank0: 2048MB(auto)-2T-11
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x00007600
Load bl301 from eMMC, src: 0x00018200, des: 0x01380000, size: 0x00002200
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019600
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x00047400
NOTICE: BL3-1: v1.0(debug):361f8a7
NOTICE: BL3-1: Built : 16:43:26, Dec 19 2018
NOTICE: BL31: GXL normal boot!
NOTICE: BL31: BL33 decompress pass
[Image: gxl_v1.1.3103-9234004 2018-12-27 10:43:23 yao.zhang@droid07]
efuse init ops = c5
efuse init hdcp = c, cf9=7
x2_hp_e = 0
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: 0 0 3 c c 0 d0 b3 68 a0 0 c5 not ES chip
[0.589162 Inits done]
INFO: BL3-1: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader
ERROR: Error initializing runtime service opteed_fast
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x1000000
INFO: BL3-1: Next image spsr = 0x3c9
U-Boot 2015.01-g344ab52-dirty (Aug 26 2020 - 21:01:13)
DRAM: 2 GiB
Relocation Offset is: 76eef000
gpio: pin GPIODV_25 (gpio 44) value is 1
gpio: pin GPIOZ_14 (gpio 73) value is 1
register usb cfg[0][1] = 0000000077f61b38
[CANVAS]canvas init
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
vpp: vpp_init
MMC: aml_priv->desc_buf = 0x0000000073edfbf0
aml_priv->desc_buf = 0x0000000073ee1f10
SDIO Port B: 0, SDIO Port C: 1
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
[mmc_init] mmc init success
dtb magic 08088b1f
Amlogic multi-dtb tool
GZIP format, decompress...
Multi dtb detected
unified board, board id = 4
Multi dtb tool version: v2 .
Support 13 dtbs.
aml_dt soc: gxlx2 platform: p291 variant: 2g
dtb 0 soc: gxl plat: p211 vari: 1g
dtb 1 soc: gxl plat: p211 vari: 512m
dtb 2 soc: gxl plat: p215 vari: 1g
dtb 3 soc: gxlx plat: p261 vari: 1g
dtb 4 soc: gxlx plat: p261 vari: 2g
dtb 5 soc: gxlx plat: p261 vari: 512m
dtb 6 soc: gxlx plat: p265 vari: 1g
dtb 7 soc: gxlx plat: p265 vari: 2g
dtb 8 soc: gxlx2 plat: p291 vari: 1g
dtb 9 soc: gxlx2 plat: p291 vari: 2g
dtb 10 soc: gxlx2 plat: p291 vari: 512m
dtb 11 soc: gxlx2 plat: p295 vari: 1g
dtb 12 soc: gxlx2 plat: p295 vari: 2g
Find match dtb: 9
start dts,buffer=0000000073ee4740,dt_addr=0000000073ee4740
Amlogic multi-dtb tool
Single dtb detected
parts: 14
00: logo 0000000002000000 1
01: recovery 0000000002000000 1
02: rsv 0000000000800000 1
03: tee 0000000000800000 1
04: crypt 0000000002000000 1
05: misc 0000000002000000 1
06: instaboot 0000000020000000 1
07: boot 0000000002000000 1
08: system 0000000040000000 1
09: cache 0000000020000000 2
10: params 0000000004000000 2
11: bootfiles 0000000020000000 2
12: swdb 0000000001000000 2
13: data ffffffffffffffff 4
eMMC/TSD partition table have been checked OK!
check pattern success
mmc env offset: 0x27400000
In: serial
Out: serial
Err: serial
board id is : 4
hpd_state=0
cvbs performance type = 7, table = 1
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-924: calc d732a217, store d732a217
_verify_dtb_checksum()-924: calc d732a217, store d732a217
dtb_read()-1046: total valid 2
dtb_read()-1113: do nothing
Amlogic multi-dtb tool
GZIP format, decompress...
Multi dtb detected
unified board, board id = 4
Multi dtb tool version: v2 .
Support 13 dtbs.
aml_dt soc: gxlx2 platform: p291 variant: 2g
dtb 0 soc: gxl plat: p211 vari: 1g
dtb 1 soc: gxl plat: p211 vari: 512m
dtb 2 soc: gxl plat: p215 vari: 1g
dtb 3 soc: gxlx plat: p261 vari: 1g
dtb 4 soc: gxlx plat: p261 vari: 2g
dtb 5 soc: gxlx plat: p261 vari: 512m
dtb 6 soc: gxlx plat: p265 vari: 1g
dtb 7 soc: gxlx plat: p265 vari: 2g
dtb 8 soc: gxlx2 plat: p291 vari: 1g
dtb 9 soc: gxlx2 plat: p291 vari: 2g
dtb 10 soc: gxlx2 plat: p291 vari: 512m
dtb 11 soc: gxlx2 plat: p295 vari: 1g
dtb 12 soc: gxlx2 plat: p295 vari: 2g
Find match dtb: 9
wipe_data=successful
wipe_cache=successful
bmp pixel: 24
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[CANVAS]addr=0x3dc00000 width=5760, height=2160
upgrade_step=2
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
rebootmode=cold_boot
key1 = 7d82dd22
key2 = 7e81dd22
key3 = 728ddd22
time_out = 7a120
ir init
irkey - irkey key_value1 key_value2 key_value3 time_value
Usage:
irkey
card out
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
(Re)start USB...
USB0: USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
reading s905_autoscript
1654 bytes read in 47 ms (34.2 KiB/s)
## Executing script at 01020000
start amlogic old u-boot
## Error: "bootfromsd" not defined
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
** Bad device mmc 0 **
reading boot_android
** Unable to read file boot_android **
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
** Bad device mmc 0 **
reading u-boot.ext
650183 bytes read in 467 ms (1.3 MiB/s)
## Starting application at 0x01000000 ...
[BL31]: tee size: 0
[BL31]: tee size: 0
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.80-flippy-79+o (root@univm25) (Ubuntu clang version 14.0.0-1ubuntu1, Ubuntu LLD 14.0.0) #193 SMP PREEMPT Sat Nov 26 20:38:02 CST 2022
[ 0.000000] Machine model: Amlogic Meson GXL (S905X) P212 Development Board
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006b400000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 19 pages/cpu s37720 r8192 d31912 u77824
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Kernel command line: root=UUID=8aa075c0-0156-4c09-a2f9-1846758a3a3a rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=3e:5a:7f:55:f4:9c
[ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=3e:5a:7f:55:f4:9c", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1710624K/2097152K available (15232K kernel code, 2726K rwdata, 4704K rodata, 1984K init, 887K bss, 124384K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000566] Console: colour dummy device 80x25
[ 0.000991] printk: console [tty0] enabled
[ 0.001052] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.001077] pid_max: default: 32768 minimum: 301
[ 0.001276] LSM: Security Framework initializing
[ 0.001391] SELinux: Initializing.
[ 0.001654] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001681] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.003932] rcu: Hierarchical SRCU implementation.
[ 0.005116] EFI services will not be available.
[ 0.005575] smp: Bringing up secondary CPUs ...
[ 0.006248] Detected VIPT I-cache on CPU1
[ 0.006317] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007084] Detected VIPT I-cache on CPU2
[ 0.007145] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007851] Detected VIPT I-cache on CPU3
[ 0.007906] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.007992] smp: Brought up 1 node, 4 CPUs
[ 0.008065] SMP: Total of 4 processors activated.
[ 0.008077] CPU features: detected: 32-bit EL0 Support
[ 0.008088] CPU features: detected: 32-bit EL1 Support
[ 0.008102] CPU features: detected: CRC32 instructions
[ 0.008959] CPU: All CPU(s) started at EL2
[ 0.008992] alternatives: patching kernel code
[ 0.010956] devtmpfs: initialized
[ 0.018943] Registered cp15_barrier emulation handler
[ 0.018984] Registered setend emulation handler
[ 0.019152] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.019183] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.025819] prandom: seed boundary self test passed
[ 0.027044] prandom: 100 self tests passed
[ 0.049989] prandom32: self test passed (less than 6 bits correlated)
[ 0.050046] pinctrl core: initialized pinctrl subsystem
[ 0.050723] DMI not present or invalid.
[ 0.051234] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.053357] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.053612] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.053812] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.053936] audit: initializing netlink subsys (disabled)
[ 0.054189] audit: type=2000 audit(0.053:1): state=initialized audit_enabled=0 res=1
[ 0.055267] thermal_sys: Registered thermal governor 'step_wise'
[ 0.055583] cpuidle: using governor ladder
[ 0.055772] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.055902] ASID allocator initialised with 65536 entries
[ 0.056082] Serial: AMBA PL011 UART driver
[ 0.075928] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu
[ 0.080015] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu
[ 0.080313] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx
[ 0.088978] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.089016] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.089031] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.089045] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.495574] cryptd: max_cpu_qlen set to 1000
[ 1.499475] "cryptomgr_test" (91) uses obsolete ecb(arc4) skcipher
[ 1.512210] alg: No test for 842 (842-generic)
[ 1.512378] alg: No test for 842 (842-scomp)
[ 1.603605] DRBG: Continuing without Jitter RNG
[ 1.686048] raid6: neonx8 gen() 2224 MB/s
[ 1.742789] raid6: neonx8 xor() 1591 MB/s
[ 1.799536] raid6: neonx4 gen() 2216 MB/s
[ 1.856278] raid6: neonx4 xor() 1539 MB/s
[ 1.913019] raid6: neonx2 gen() 2044 MB/s
[ 1.969764] raid6: neonx2 xor() 1432 MB/s
[ 2.026520] raid6: neonx1 gen() 1662 MB/s
[ 2.083253] raid6: neonx1 xor() 1173 MB/s
[ 2.139993] raid6: int64x8 gen() 1507 MB/s
[ 2.196724] raid6: int64x8 xor() 802 MB/s
[ 2.253465] raid6: int64x4 gen() 1627 MB/s
[ 2.310205] raid6: int64x4 xor() 823 MB/s
[ 2.366958] raid6: int64x2 gen() 1391 MB/s
[ 2.423677] raid6: int64x2 xor() 738 MB/s
[ 2.480411] raid6: int64x1 gen() 1171 MB/s
[ 2.537148] raid6: int64x1 xor() 582 MB/s
[ 2.537160] raid6: using algorithm neonx8 gen() 2224 MB/s
[ 2.537172] raid6: .... xor() 1591 MB/s, rmw enabled
[ 2.537183] raid6: using neon recovery algorithm
[ 2.537483] fbcon: Taking over console
[ 2.537529] ACPI: Interpreter disabled.
[ 2.539746] iommu: Default domain type: Translated
[ 2.539778] iommu: DMA domain TLB invalidation policy: strict mode
[ 2.540151] vgaarb: loaded
[ 2.540733] SCSI subsystem initialized
[ 2.540972] usbcore: registered new interface driver usbfs
[ 2.541031] usbcore: registered new interface driver hub
[ 2.541079] usbcore: registered new device driver usb
[ 2.541569] mc: Linux media interface: v0.10
[ 2.541615] videodev: Linux video capture interface: v2.00
[ 2.541892] EDAC MC: Ver: 3.0.0
[ 2.543055] Advanced Linux Sound Architecture Driver Initialized.
[ 2.544145] clocksource: Switched to clocksource arch_sys_counter
[ 2.544496] VFS: Disk quotas dquot_6.6.0
[ 2.544593] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.544765] FS-Cache: Loaded
[ 2.545286] pnp: PnP ACPI: disabled
[ 2.552619] NET: Registered PF_INET protocol family
[ 2.552824] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 2.554097] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 2.554174] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 2.554256] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.554392] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 2.554627] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.554893] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 2.555007] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.555063] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.555265] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.555302] NET: Registered PF_XDP protocol family
[ 2.555324] PCI: CLS 0 bytes, default 64
[ 2.555590] Trying to unpack rootfs image as initramfs...
[ 2.568260] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.568779] kvm [1]: IPA Size Limit: 40 bits
[ 2.569651] kvm [1]: vgic interrupt IRQ9
[ 2.569825] kvm [1]: Hyp mode initialized successfully
[ 3.151899] Freeing initrd memory: 8004K
[ 3.378880] Initialise system trusted keyrings
[ 3.379175] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 3.386372] zbud: loaded
[ 3.388126] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.388719] fuse: init (API version 7.34)
[ 3.389287] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 3.430378] NET: Registered PF_ALG protocol family
[ 3.480844] xor: measuring software checksum speed
[ 3.485679] 8regs : 2051 MB/sec
[ 3.489087] 32regs : 2908 MB/sec
[ 3.493677] arm64_neon : 2153 MB/sec
[ 3.493689] xor: using function: 32regs (2908 MB/sec)
[ 3.493706] Key type asymmetric registered
[ 3.493718] Asymmetric key parser 'x509' registered
[ 3.493831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 3.494035] io scheduler mq-deadline registered
[ 3.494051] io scheduler kyber registered
[ 3.494260] io scheduler bfq registered
[ 3.521035] soc soc0: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2) Detected
[ 3.523492] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 3.525658] Serial: AMBA driver
[ 3.526152] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 20, base_baud = 1500000) is a meson_uart
[ 3.526362] serial serial0: tty port ttyAML6 registered
[ 3.526939] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 23, base_baud = 1500000) is a meson_uart
[ 4.566250] printk: console [ttyAML0] enabled
[ 4.580544] brd: module loaded
[ 4.585290] loop: module loaded
[ 4.592540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.593458] ehci-pci: EHCI PCI platform driver
[ 4.597920] ehci-platform: EHCI generic platform driver
[ 4.603688] usbcore: registered new interface driver cdc_wdm
[ 4.608678] usbcore: registered new interface driver usb-storage
[ 4.615163] mousedev: PS/2 mouse device common for all mice
[ 4.621318] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi
[ 4.627504] meson-vrtc c81000a8.rtc: registered as rtc0
[ 4.631764] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
[ 4.640363] i2c_dev: i2c /dev entries driver
[ 4.646282] Registered IR keymap rc-cec
[ 4.647945] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0
[ 4.656143] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input0
[ 4.668457] sdhci: Secure Digital Host Controller Interface driver
[ 4.670832] sdhci: Copyright(c) Pierre Ossman
[ 4.675129] Synopsys Designware Multimedia Card Interface Driver
[ 4.682168] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.682576] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 4.682831] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 4.689716] meson-sm: secure-monitor enabled
[ 4.703527] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.709087] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.720679] hid: raw HID events driver (C) Jiri Kosina
[ 4.721957] usbcore: registered new interface driver usbhid
[ 4.726913] gpio irq setup: hwirq: 0x3A irqfirst: 0x34 irqlast: 0x3A pin[48]
[ 4.727340] usbhid: USB HID core driver
[ 4.734814] genirq: Setting trigger mode 3 for irq 49 failed (meson_gpio_irq_set_type+0x0/0x140)
[ 4.738648] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[BL31]: tee size: 0
[ 4.761876] Initializing XFRM netlink socket
[ 4.762542] NET: Registered PF_INET6 protocol family
[ 4.803265] Segment Routing with IPv6
[ 4.803312] RPL Segment Routing with IPv6
[ 4.805369] In-situ OAM (IOAM) with IPv6
[ 4.809342] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.818578] bpfilter: Loaded bpfilter_umh pid 301
[ 4.819763] NET: Registered PF_PACKET protocol family
[ 4.824780] NET: Registered PF_KEY protocol family
[ 4.829637] 8021q: 802.1Q VLAN Support v1.8
[ 4.834038] registered taskstats version 1
[ 4.837686] Loading compiled-in X.509 certificates
[ 4.845007] zswap: loaded using pool zstd/zbud
[ 4.847395] Key type .fscrypt registered
[ 4.850680] Key type fscrypt-provisioning registered
[ 4.856580] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 4.864458] mmc2: new HS200 MMC card at address 0001
[ 4.867985] mmcblk2: mmc2:0001 Biwin 6.96 GiB
[ 4.874453] mmcblk2boot0: mmc2:0001 Biwin 4.00 MiB
[ 4.878124] mmcblk2boot1: mmc2:0001 Biwin 4.00 MiB
[ 4.882705] mmcblk2rpmb: mmc2:0001 Biwin 4.00 MiB, chardev (240:0)
[ 4.894977] meson-drm d0100000.vpu: Queued 3 outputs on vpu
[ 4.924215] meson-dw-hdmi c883a000.hdmi-tx: Unsupported HDMI controller (0d0d:0d:0d)
[ 4.926750] meson-drm d0100000.vpu: failed to bind c883a000.hdmi-tx (ops 0xffffffc00a2e8450): -19
[ 4.935150] meson-drm d0100000.vpu: Couldn't bind all components
[ 4.941437] meson-drm d0100000.vpu: master bind failed: -19
[ 4.948942] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 4.953183] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 4.959437] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 4.966302] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 4.972331] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 4.977605] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 4.984908] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 4.992322] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 4.997496] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 5.004483] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 5.010866] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 5.016730] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 5.022509] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 5.033721] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 5.035660] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 5.548787] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 5.550507] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 5.557704] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 5.566638] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.570087] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 5.577555] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 5.586788] xhci-hcd xhci-hcd.1.auto: irq 51, io mem 0xc9000000
[ 5.592806] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.598212] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 5.605607] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 5.612225] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 5.620257] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.627415] usb usb1: Product: xHCI Host Controller
[ 5.632245] usb usb1: Manufacturer: Linux 5.15.80-flippy-79+o xhci-hcd
[ 5.638713] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 5.644120] hub 1-0:1.0: USB hub found
[ 5.647289] hub 1-0:1.0: 2 ports detected
[ 5.651696] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.659381] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 5.667438] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.674690] usb usb2: Product: xHCI Host Controller
[ 5.679425] usb usb2: Manufacturer: Linux 5.15.80-flippy-79+o xhci-hcd
[ 5.685896] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 5.691276] hub 2-0:1.0: USB hub found
[ 5.694481] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 5.705569] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[ 5.706130] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
get_dvfs_info 0004
[ 5.744848] ALSA device list:
[ 5.744891] No soundcards found.
[ 5.746357] Freeing unused kernel memory: 1984K
[ 5.770885] Run /init as init process
[ 5.772628] mmc0: new high speed SDIO card at address 0001
[ 5.900853] usb 1-2: new high-speed USB device number 2 using xhci-hcd
[ 6.042269] usb 1-2: New USB device found, idVendor=090c, idProduct=1100, bcdDevice=11.00
[ 6.044968] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.052059] usb 1-2: Product: Teclast CoolFlash
[ 6.056420] usb 1-2: Manufacturer: Generic
[ 6.061801] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 6.067348] scsi host0: usb-storage 1-2:1.0
[ 7.758779] scsi 0:0:0:0: Direct-Access Teclast CoolFlash 1100 PQ: 0 ANSI: 4
[ 7.765216] sd 0:0:0:0: [sda] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 7.770240] sd 0:0:0:0: [sda] Write Protect is off
[ 7.774674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.792391] sda: sda1 sda2
[ 7.800289] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 8.990214] EXT4-fs (sda2): recovery complete
[ 8.995374] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback. Quota mode: none.
[ 9.776135] systemd[1]: System time before build time, advancing clock.
[ 9.935975] systemd[1]: systemd 249.11-0ubuntu3.6 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 9.963178] systemd[1]: Detected architecture arm64.
[ 9.968744] systemd[1]: Detected first boot.
[ 9.975071] systemd[1]: Hostname set to <armbian>.
[ 10.000659] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.001878] systemd[1]: Initializing machine ID from random generator.
[ 12.172077] systemd[1]: Populated /etc with preset unit settings.
[ 12.566599] systemd[1]: Queued start job for default target Graphical Interface.
[ 12.570322] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.579320] systemd[1]: Created slice Slice /system/modprobe.
[ 12.581433] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.589323] systemd[1]: Created slice Slice /system/serial-getty.
[ 12.593760] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.602257] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 12.607757] systemd[1]: Created slice User and Session Slice.
[ 12.612374] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.620633] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.629384] systemd[1]: Reached target Slice Units.
[ 12.633700] systemd[1]: Reached target Swaps.
[ 12.637884] systemd[1]: Reached target System Time Set.
[ 12.643551] systemd[1]: Reached target Local Verity Protected Volumes.
[ 12.669973] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 12.672227] systemd[1]: Listening on Syslog Socket.
[ 12.685128] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 12.687049] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 12.694452] systemd[1]: Listening on Journal Audit Socket.
[ 12.699400] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.705424] systemd[1]: Listening on Journal Socket.
[ 12.709924] systemd[1]: systemd-networkd.socket: Socket service systemd-networkd.service not loaded, refusing.
[ 12.718878] systemd[1]: Failed to listen on Network Service Netlink Socket.
[ 12.727539] systemd[1]: Listening on udev Control Socket.
[ 12.732286] systemd[1]: Listening on udev Kernel Socket.
[ 12.741354] systemd[1]: Mounting Huge Pages File System...
[ 12.747262] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.753602] systemd[1]: Mounting Kernel Debug File System...
[ 12.754798] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 12.762692] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 12.778459] systemd[1]: Starting Restore / save the current clock...
[ 12.785238] systemd[1]: Starting Wait for network to be configured by ifupdown...
[ 12.813580] systemd[1]: Starting Set the console keyboard layout...
[ 12.820853] systemd[1]: Starting Create List of Static Device Nodes...
[ 12.828882] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[ 12.836559] systemd[1]: Starting Load Kernel Module configfs...
[ 12.843817] systemd[1]: Starting Load Kernel Module drm...
[ 12.851525] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 12.858662] systemd[1]: Starting Load Kernel Module fuse...
[ 12.865857] systemd[1]: Starting Load Kernel Module pstore_blk...
[ 12.872954] systemd[1]: Starting Load Kernel Module pstore_zone...
[ 12.880628] systemd[1]: Starting Load Kernel Module ramoops...
[ 12.888180] systemd[1]: Started Nameserver information manager.
[ 12.893080] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 12.910351] systemd[1]: Starting Load Kernel Modules...
[ 12.916537] systemd[1]: Starting Generate network units from Kernel command line...
[ 12.925356] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.933220] systemd[1]: Starting Coldplug All udev Devices...
[ 12.949739] systemd[1]: Mounted Huge Pages File System.
[ 12.951069] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.957063] systemd[1]: Mounted Kernel Debug File System.
[ 12.963271] systemd[1]: Finished Restore / save the current clock.
[ 12.969840] systemd[1]: Finished Create List of Static Device Nodes.
[ 12.975599] systemd[1]: modprobe@chromeos_pstore.service: Deactivated successfully.
[ 12.982359] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 12.983088] systemd[1]: Finished Load Kernel Module chromeos_pstore.
[ 13.000263] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 13.003527] systemd[1]: Finished Load Kernel Module configfs.
[ 13.009659] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 13.015545] systemd[1]: Finished Load Kernel Module drm.
[ 13.021546] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 13.027981] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 13.034097] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 13.041079] systemd[1]: Finished Load Kernel Module fuse.
[ 13.046536] systemd[1]: modprobe@pstore_blk.service: Deactivated successfully.
[ 13.053678] systemd[1]: Finished Load Kernel Module pstore_blk.
[ 13.059602] systemd[1]: modprobe@pstore_zone.service: Deactivated successfully.
[ 13.066254] systemd[1]: Finished Load Kernel Module pstore_zone.
[ 13.072454] systemd[1]: modprobe@ramoops.service: Deactivated successfully.
[ 13.079641] systemd[1]: Finished Load Kernel Module ramoops.
[ 13.087362] systemd[1]: Finished Load Kernel Modules.
[ 13.090861] systemd[1]: Finished Generate network units from Kernel command line.
[ 13.097942] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 13.103376] systemd[1]: Reached target Preparation for Network.
[ 13.113429] systemd[1]: Mounting FUSE Control File System...
[ 13.118623] systemd[1]: Mounting Kernel Configuration File System...
[ 13.120484] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 13.134698] systemd[1]: Starting Load/Save Random Seed...
[ 13.141131] systemd[1]: Starting Apply Kernel Variables...
[ 13.148127] systemd[1]: Starting Create System Users...
[ 13.156035] systemd[1]: Finished Set the console keyboard layout.
[ 13.164617] systemd[1]: Mounted FUSE Control File System.
[ 13.166249] systemd[1]: Mounted Kernel Configuration File System.
[ 13.224177] random: crng init done
[ 13.224229] random: 44 urandom warning(s) missed due to ratelimiting
[ 13.227226] systemd[1]: Finished Create System Users.
[ 13.239997] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.309541] systemd[1]: Finished Apply Kernel Variables.
[ 13.329316] systemd[1]: Finished Load/Save Random Seed.
[ 13.330594] systemd[1]: Reached target First Boot Complete.
[ 13.362908] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 13.364621] systemd[1]: Reached target Preparation for Local File Systems.
[ 13.376838] systemd[1]: Mounting /tmp...
[ 13.386101] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 13.392870] systemd[1]: Mounted /tmp.
[ 13.443804] systemd[1]: Finished Coldplug All udev Devices.
[ 13.450315] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 13.623982] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ 13.626998] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped.
[ 13.634393] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[ 13.649895] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped.
[ 13.658069] systemd[1]: Reached target Local Encrypted Volumes.
[ 13.991849] systemd[1]: Found device /dev/ttyAML0.
[ 13.996024] Registered IR keymap rc-empty
[ 14.000443] rc rc1: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1
[ 14.006806] rc rc1: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[ 14.014732] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1/input1
[ 14.021204] meson-ir c8100580.ir: receiver initialized
[ 14.057193] systemd[1]: Reached target Hardware activated USB gadget.
[ 14.059285] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 14.181531] SError Interrupt on CPU2, code 0xbf000002 -- SError
[ 14.181545] CPU: 2 PID: 489 Comm: systemd-udevd Tainted: G C 5.15.80-flippy-79+o #193
[ 14.181554] Hardware name: Amlogic Meson GXL (S905X) P212 Development Board (DT)
[ 14.181558] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 14.181567] pc : local_daif_inherit+0x24/0x64
[ 14.181584] lr : el1_abort+0x2c/0x5c
[ 14.181594] sp : ffffffc0083db6e0
[ 14.181596] x29: ffffffc0083db6e0 x28: ffffff8001e77000 x27: ffffff8003439100
[ 14.181609] x26: 0000000000000000 x25: ffffffc001ffe1b8 x24: 0000000000000001
[ 14.181619] x23: 0000000080000005 x22: ffffffc001ff6c84 x21: ffffffc008606000
[ 14.181628] x20: ffffffc0083db720 x19: 0000000096000210 x18: ffffffc00a1b71bc
[ 14.181637] x17: 0000000000000051 x16: 00000000000000cc x15: 0000000000000000
[ 14.181646] x14: 00000000000000a9 x13: 0000000000000000 x12: 0000000000000004
[ 14.181654] x11: 000000000000002c x10: ffffffc009f4984c x9 : ffffffc00a19d984
[ 14.181663] x8 : 0000000000000000 x7 : 6d6821ff71646b6b x6 : 0000000080225a21
[ 14.181672] x5 : 215a220000000000 x4 : 0000008000000000 x3 : ffffffc0083db6dc
[ 14.181681] x2 : 0000000096000210 x1 : 0000000096000210 x0 : ffffffc0083db720
[ 14.181693] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 14.181698] CPU: 2 PID: 489 Comm: systemd-udevd Tainted: G C 5.15.80-flippy-79+o #193
[ 14.181705] Hardware name: Amlogic Meson GXL (S905X) P212 Development Board (DT)
[ 14.181709] Call trace:
[ 14.181711] dump_backtrace+0x0/0x1ec
[ 14.181722] dump_stack_lvl+0x74/0xb0
[ 14.181731] panic+0x14c/0x35c
[ 14.181740] nmi_panic+0x70/0x74
[ 14.181747] arm64_serror_panic+0x60/0x6c
[ 14.181752] do_serror+0xd4/0xf4
[ 14.181757] el1h_64_error_handler+0x34/0x48
[ 14.181765] el1h_64_error+0x78/0x7c
[ 14.181772] local_daif_inherit+0x24/0x64
[ 14.181779] el1h_64_sync_handler+0x5c/0x98
[ 14.181786] el1h_64_sync+0x78/0x7c
[ 14.181791] lima_mmu_init+0x48/0x118 [lima]
[ 14.181852] lima_device_init+0x204/0x564 [lima]
[ 14.181898] lima_pdev_probe+0x90/0x17c [lima]
[ 14.181942] platform_probe+0xa8/0xd0
[ 14.181952] call_driver_probe+0x38/0x110
[ 14.181960] really_probe+0xc4/0x34c
[ 14.181966] __driver_probe_device+0x114/0x17c
[ 14.181972] driver_probe_device+0x44/0x1ec
[ 14.181978] __driver_attach.llvm.2617487977940390934+0xf0/0x248
[ 14.181986] bus_add_driver+0x160/0x28c
[ 14.181995] driver_register+0x78/0x114
[ 14.182001] __platform_driver_register+0x24/0x30
[ 14.182008] init_module+0x20/0xff4 [lima]
[ 14.182055] do_one_initcall+0xa8/0x20c
[ 14.182067] do_init_module+0x44/0x2f4
[ 14.182076] load_module+0x10cc/0x126c
[ 14.182083] __se_sys_finit_module+0xbc/0x124
[ 14.182090] __arm64_sys_finit_module+0x1c/0x28
[ 14.182097] invoke_syscall+0x40/0x100
[ 14.182105] el0_svc_common.llvm.4206774317640792181+0x90/0x188
[ 14.182114] do_el0_svc+0x24/0x78
[ 14.182120] el0_svc+0x20/0x78
[ 14.182129] el0t_64_sync_handler+0x84/0xe4
[ 14.182136] el0t_64_sync+0x1a0/0x1a4
[ 14.182144] SMP: stopping secondary CPUs
[ 14.182158] Kernel Offset: disabled
[ 14.182160] CPU features: 0x00002001,00000846
[ 14.182166] Memory Limit: none
[ 14.466139] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
换了个rom也拷贝了u-boot-s905x-s912.bin 改名u-boot.ext
上面的还错[ 14.883162] Call trace:
[ 14.883164] dump_backtrace+0x0/0x1ec
[ 14.883174] dump_stack_lvl+0x74/0xb0
[ 14.883184] panic+0x14c/0x35c
[ 14.883194] nmi_panic+0x70/0x74
[ 14.883201] arm64_serror_panic+0x60/0x6c
[ 14.883206] do_serror+0xd4/0xf4
[ 14.883211] el1h_64_error_handler+0x34/0x48
[ 14.883219] el1h_64_error+0x78/0x7c
[ 14.883226] local_daif_inherit+0x24/0x64
[ 14.883232] el1h_64_sync_handler+0x5c/0x98
[ 14.883239] el1h_64_sync+0x78/0x7c
[ 14.883244] lima_mmu_init+0x48/0x118 [lima]
[ 14.883303] lima_device_init+0x204/0x564 [lima]
[ 14.883347] lima_pdev_probe+0x90/0x17c [lima]
[ 14.883392] platform_probe+0xa8/0xd0
[ 14.883403] call_driver_probe+0x38/0x110
[ 14.883410] really_probe+0xc4/0x34c
[ 14.883417] __driver_probe_device+0x114/0x17c
[ 14.883423] driver_probe_device+0x44/0x1ec
[ 14.883429] __driver_attach.llvm.2617487977940390934+0xf0/0x248
[ 14.883436] bus_add_driver+0x160/0x28c
[ 14.883445] driver_register+0x78/0x114
[ 14.883451] __platform_driver_register+0x24/0x30
[ 14.883458] init_module+0x20/0xff4 [lima]
[ 14.883506] do_one_initcall+0xa8/0x20c
[ 14.883517] do_init_module+0x44/0x2f4
[ 14.883526] load_module+0x10cc/0x126c
[ 14.883533] __se_sys_finit_module+0xbc/0x124
[ 14.883539] __arm64_sys_finit_module+0x1c/0x28
[ 14.883546] invoke_syscall+0x40/0x100
[ 14.883554] el0_svc_common.llvm.4206774317640792181+0x90/0x188
[ 14.883563] do_el0_svc+0x24/0x78
[ 14.883569] el0_svc+0x20/0x78
[ 14.883578] el0t_64_sync_handler+0x84/0xe4
[ 14.883585] el0t_64_sync+0x1a0/0x1a4
[ 14.883592] SMP: stopping secondary CPUs
[ 14.883614] Kernel Offset: disabled
[ 14.883617] CPU features: 0x00002001,00000846
[ 14.883625] Memory Limit: none
[ 15.173953] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
又换了个A9 rom 还是一样你之前是不是只改的uEnv.txt呢？
你同时改这个extlinux\extlinux.conf文件（后缀.bak删了） 这个盒子可能要用这个文件启动。
dtb改为meson-gxl-s905x-p212.dtb 复制u-boot-s905x-s912.bin为u-boot.ext
urenai
commented
2 years ago [ 22.098204] Call trace:
[ 22.098206] dump_backtrace+0x0/0x1ec
[ 22.098216] dump_stack_lvl+0x74/0xb0
[ 22.098225] panic+0x14c/0x35c
[ 22.098233] nmi_panic+0x70/0x74
[ 22.098239] arm64_serror_panic+0x60/0x6c
[ 22.098245] do_serror+0xd4/0xf4
[ 22.098250] el1h_64_error_handler+0x34/0x48
[ 22.098258] el1h_64_error+0x78/0x7c
[ 22.098264] local_daif_inherit+0x24/0x64
[ 22.098271] el1h_64_sync_handler+0x5c/0x98
[ 22.098278] el1h_64_sync+0x78/0x7c
[ 22.098283] lima_mmu_init+0x48/0x118 [lima]
[ 22.098343] lima_device_init+0x204/0x564 [lima]
[ 22.098387] lima_pdev_probe+0x90/0x17c [lima]
[ 22.098432] platform_probe+0xa8/0xd0
[ 22.098442] call_driver_probe+0x38/0x110
[ 22.098450] really_probe+0xc4/0x34c
[ 22.098456] __driver_probe_device+0x114/0x17c
[ 22.098462] driver_probe_device+0x44/0x1ec
[ 22.098468] __driver_attach.llvm.2617487977940390934+0xf0/0x248
[ 22.098475] bus_add_driver+0x160/0x28c
[ 22.098484] driver_register+0x78/0x114
[ 22.098490] __platform_driver_register+0x24/0x30
[ 22.098497] init_module+0x20/0xff4 [lima]
[ 22.098543] do_one_initcall+0xa8/0x20c
[ 22.098554] do_init_module+0x44/0x2f4
[ 22.098563] load_module+0x10cc/0x126c
[ 22.098571] __se_sys_finit_module+0xbc/0x124
[ 22.098577] __arm64_sys_finit_module+0x1c/0x28
[ 22.098584] invoke_syscall+0x40/0x100
[ 22.098594] el0_svc_common.llvm.4206774317640792181+0x90/0x188
[ 22.098602] do_el0_svc+0x24/0x78
[ 22.098609] el0_svc+0x20/0x78
[ 22.098618] el0t_64_sync_handler+0x84/0xe4
[ 22.098625] el0t_64_sync+0x1a0/0x1a4
[ 22.098632] SMP: stopping secondary CPUs
[ 22.098656] Kernel Offset: disabled
[ 22.098659] CPU features: 0x00002001,00000846
[ 22.098665] Memory Limit: none
[ 22.388983] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
我正在尝试更换高速SD卡
urenai
commented
2 years ago 没用，全改了，还是错误
[ 17.314385] el0_svc+0x20/0x78 [ 17.314394] el0t_64_sync_handler+0x84/0xe4 [ 17.314401] el0t_64_sync+0x1a0/0x1a4 [ 17.314409] SMP: stopping secondary CPUs [ 17.314425] Kernel Offset: disabled [ 17.314428] CPU features: 0x00002001,00000846 [ 17.314434] Memory Limit: none [ 17.604711] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
ophub
commented
2 years ago 你发的ttl贴子里也是这个组合。 你下他的armbian试试
urenai
commented
2 years ago Armbian_20.10_Arm-64_buster_current_5.9.0.img
extlinux\extlinux.conf = meson-gxl-s905x-p212.dtb u-boot-s905x-s912.bin cp = u-boot.ext
[ 13.797725] el0_sync_handler+0x180/0x2f8 [ 13.797726] el0_sync+0x158/0x180 [ 13.797749] SMP: stopping secondary CPUs [ 13.797751] Kernel Offset: disabled [ 13.797752] CPU features: 0x0040002,20002004 [ 13.797753] Memory Limit: none
ophub
commented
2 years ago 这个也不行吗？
urenai
commented
2 years ago 最后这个应该是报内存错误吧， Memory Limit: none 过后要等多久？？我登录2分钟左右，没下文就算了的。
ophub
commented
2 years ago 等就是不行，这都是秒识别。
urenai
commented
2 years ago 歇着了，干脆买个好点的盒子，再来折腾。
urenai
commented
2 years ago Memory Limit: none
下一步是检测什么？？
ophub
commented
2 years ago 这个组合应该是正确的，在你看的网上文章里使用5.9安装成功了。在这的问答区里，也有人使用现在最新的5.15内核安装成功了。
但是这些盒子有时候同名不同芯。 内核恐慌不是很好解决。有时是因为频率高导致的，你可以试试降低CPU和EMMC的频率，看看能不能稳定点。
urenai
commented
2 years ago 中兴B860AV2.1-A 使用 meson-gxl-s905l2-x7-5g.dtb 无法识别emmc；；；使用meson-gxl-s905l2-ipbs9505.dtb安装到emmc后，无网络
上述2款盒子有ROOT权限情况下，使用软件执行U盘启动 或 adbd 执行reboot update命令 均无效，无法正确启动 U盘armbian。唯一的办法是使用TTL，在盒子安卓系统启动过程或启动完毕后，执行reboot update。
sniperpr
commented
2 years ago HDMI有显示吗？
CM211-1 使用 meson-gxl-s905x-p212.dtb u-boot-s905x-s912.bin 停留在 Memory Limit: none 已经确定无疑了。
中兴B860AV2.1-A 使用 meson-gxl-s905l2-x7-5g.dtb 无法识别emmc；；；使用meson-gxl-s905l2-ipbs9505.dtb安装到emmc后，无网络
上述2款盒子有ROOT权限情况下，使用软件执行U盘启动 或 adbd 执行reboot update命令 均无效，无法正确启动 U盘armbian。唯一的办法是使用TTL，在盒子安卓系统启动过程或启动完毕后，执行reboot update。
urenai
commented
2 years ago 有
caizhenbing
commented
12 months ago
Standard chat template, no routine, no chat. 标准聊天模板，无套路不聊天。
Device Information | 设备信息
Describe the bug | 问题描述 未找到该型号的DTB文件，希望能够得到支持。