s905l3a CM311-1a-YST: Cannot attach to PHY (error: -19)

kaliefgrieve00-gmail commented 1 year ago

盒子: s905l3a CM311-1a-YST

使用镜像 Armbian_23.02.0_amlogic_s905l3a_bullseye_6.0.12_server_2022.12.12.img

rufus-3.21 写入u盘

使用开心电视助手从U盘启动

无法获得IP

提示 [925.088374]meson8b-dwmac ff3f0000.ethernet eth0: no phy at addr -1 [925.094357]meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)

没有网络,不能ssh 进去发送文字版本的log 图片如下 3c7f9980b270cb232bc1260524ba4c9

解决过程: https://github.com/ophub/amlogic-s9xxx-armbian/issues/798 这个帖子的问题和我一样 , 他的机器型号和我的不一样.

我执行

cd /boot
cp -f u-boot-e900v22c.bin u-boot.ext
chmod +x u-boot.ext
sync && reboot

还是报错

2 针对我这个盒子,需要复制的是哪个.bin文件呢

ruanimal commented 1 year ago

一样的问题，而且开始配置用户名密码的时候机器很卡

ophub commented 1 year ago

https://github.com/ophub/amlogic-s9xxx-armbian/issues/517

刷这个安卓系统试试

ruanimal commented 1 year ago

517

刷这个安卓系统试试

android_tv_cm311-1a-yst_s905l3a.tar.xz 这个吗？这个刷完没有adb，也没法从u盘启动

ophub commented 1 year ago

https://github.com/ophub/amlogic-s9xxx-armbian/issues/517#issuecomment-1229127209

这个

ruanimal commented 1 year ago

晚上试试

kaliefgrieve00-gmail commented 1 year ago

我这个之前来的时候是乌班图系统，因为我习惯用迪拜，然后用，恢复包，恢复成安卓系统，然后开新助手，设置从SD卡启动。也能够进去，就是网络识别不了，不知道是不是要改什么uboot.

我感觉我的刷机流程没有问是旧，我试试旧的版本的镜像有没有这个网卡的问题。

发自我的iPhone

在 2022年12月14日，15:05，Ponder @.***> 写道：

晚上试试

— Reply to this email directly, view it on GitHubhttps://github.com/ophub/amlogic-s9xxx-armbian/issues/812#issuecomment-1350510431, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A4TVAMURIVNVFQYX67N6UBTWNFWRNANCNFSM6AAAAAAS57SZ6Q. You are receiving this because you authored the thread.Message ID: @.***>

kaliefgrieve00-gmail commented 1 year ago

#517 (comment)

这个

我刷回去的安卓,就是用的你这个版本.

重新刷了 debian的报上面的错误

kaliefgrieve00-gmail commented 1 year ago

Armbian_23.02.0_amlogic_s905l3a_bullseye_5.15.82_server_2022.12.12.img 我试试 5.15内核这个版本能不能装上网卡驱动

kaliefgrieve00-gmail commented 1 year ago

a7fd2f5a03d57e5c7f5d4b33466c761 启动5.15的内核不停报错

ruanimal commented 1 year ago

你的型号和我这个一样吗

kaliefgrieve00-gmail commented 1 year ago

你的型号和我这个一样吗

一模一样的型号

kaliefgrieve00-gmail commented 1 year ago

你的型号和我这个一样吗

你用的amrdebian的img 是哪一天的方便上传一个码? 最新的两个内核版本我都试了不行 6.0的网卡无法获取ip 5.15的一直包错误 ext4-fs error

ruanimal commented 1 year ago

一样的问题，最新的版本都不能工作

janko888 commented 1 year ago

6.0的网卡无法获取ip

顺手改了一个dtb给你试试，我没这款盒子试不了。6.0内核 cm311-6.0.zip

kaliefgrieve00-gmail commented 1 year ago

6.0的网卡无法获取ip

顺手改了一个dtb给你试试，我没这款盒子试不了。6.0内核 cm311-6.0.zip

你给的这个怎么用呢

janko888 commented 1 year ago

你给的这个怎么用呢

啊，这。。。解压出里面的dtb,放到你刷了6.0内核的U盘里面的/dtb/amlogic/目录下，其它的保持不变，如果你是按cm311-1a教程配置好的话。。

kaliefgrieve00-gmail commented 1 year ago

1 安装armbin的时候,和安卓的rom有关系吗? 重新刷回安卓我是这样设置的

kaliefgrieve00-gmail commented 1 year ago

你给的这个怎么用呢

啊，这。。。解压出里面的dtb,放到你刷了6.0内核的U盘里面的/dtb/amlogic/目录下，其它的保持不变，如果你是按cm311-1a教程配置好的话。。

号的我替换试试

ruanimal commented 1 year ago

6.0的网卡无法获取ip

顺手改了一个dtb给你试试，我没这款盒子试不了。6.0内核 cm311-6.0.zip

测试可以使用，但是感觉还是比较卡，开机大概得5分钟

janko888 commented 1 year ago

测试可以使用，但是感觉还是比较卡，开机大概得5分钟

网卡识别获取IP了吧？

ruanimal commented 1 year ago

网卡识别获取IP了吧？

是的，功能初步看也正常。为啥原来的dtb不行，和前面说的底包有关吗？我对了分区表和 #517 里面是一样的。

janko888 commented 1 year ago

问题还多着呢，待会不知道你的盒子会不会写不进入emmc，或者写入emmc不能再从USB启动了，等等，哈哈，慢慢挖掘吧。这个能用5.15的尽量用5.15.稳定

ruanimal commented 1 year ago

问题还多着呢，待会不知道你的盒子会不会写不进入emmc，或者写入emmc不能再从USB启动了，等等，哈哈，慢慢挖掘吧。这个能用5.15的尽量用5.15.稳定

关键是5.15也不能用啊

kaliefgrieve00-gmail commented 1 year ago

问题还多着呢，待会不知道你的盒子会不会写不进入emmc，或者写入emmc不能再从USB启动了，等等，哈哈，慢慢挖掘吧。这个能用5.15的尽量用5.15.稳定

关键是5.15也不能用啊

链接: https://pan.baidu.com/s/117mddzK5Nypobq5KNtlj7g?pwd=epbq 提取码: epbq 复制这段内容后打开百度网盘手机App，操作更方便哦 --来自百度网盘超级会员v6的分享你试试这个版本的安卓和他里面的arnbian. 我刷了他的安卓刷了他的armbin 是可以获取ip的

janko888 commented 1 year ago

为啥原来的dtb不行，和前面说的底包有关吗？

版本差异比较大底包有可能影响一些device吧，例如安卓4和安卓9的差别，根据我的经验来了解的话。但这里这个不是这个原因

ruanimal commented 1 year ago

链接: https://pan.baidu.com/s/117mddzK5Nypobq5KNtlj7g?pwd=epbq 提取码: epbq 复制这段内容后打开百度网盘手机App，操作更方便哦 --来自百度网盘超级会员v6的分享你试试这个版本的安卓和他里面的arnbian. 我刷了他的安卓刷了他的armbin 是可以获取ip的

我试试看，还有微信号编辑掉吧

kaliefgrieve00-gmail commented 1 year ago

链接: https://pan.baidu.com/s/117mddzK5Nypobq5KNtlj7g?pwd=epbq 提取码: epbq 复制这段内容后打开百度网盘手机App，操作更方便哦 --来自百度网盘超级会员v6的分享你试试这个版本的安卓和他里面的arnbian. 我刷了他的安卓刷了他的armbin 是可以获取ip的

我试试看，还有微信号编辑掉吧

去掉了

ruanimal commented 1 year ago

版本差异比较大底包有可能影响一些device吧，例如安卓4和安卓9的差别，根据我的经验来了解的话。但这里这个不是这个原因

M401A 用最新6.0内核又稳得很，这魔百盒真是奇葩

kaliefgrieve00-gmail commented 1 year ago

3c28f7350731b71516b745dae189670

kaliefgrieve00-gmail commented 1 year ago

版本差异比较大底包有可能影响一些device吧，例如安卓4和安卓9的差别，根据我的经验来了解的话。但这里这个不是这个原因

M401A 用最新6.0内核又稳得很，这魔百盒真是奇葩

是不是刷了armbian之后,就和之前的安卓没有关系了. u-boot之类的也是和安卓没有关系

janko888 commented 1 year ago

是不是刷了armbian之后,就和之前的安卓没有关系了. u-boot之类的也是和安卓没有关系

看写入EMMC时是把主线U-boot同时写入咯，不写入的话还是用安卓的bootloader,看设备和内核不同，方式也不同

janko888 commented 1 year ago

M401A 用最新6.0内核又稳得很，这魔百盒真是奇葩

目前s905l3a三个型号在6.0下都应该有这个问题吧，但我没有其余两款盒子，试不了。

ruanimal commented 1 year ago

目前s905l3a三个型号在6.0下都应该有这个问题吧，但我没有其余两款盒子，试不了。

刷的应该是这个版本 Armbian_23.02.0_amlogic_s905l3a_jammy_6.0.12_server_2022.12.12.img 对4k显示器的支持好像不太行，有时能输出有时黑屏，别的很稳定，跑了压力测试也没啥问题

ruanimal commented 1 year ago

另外问个问题，在系统里apt update 应该不会影响内核吧。如果觉得某个版本稳定，是不是可以不跟进armbian 的build版本，只用apt更新系统就行了。

janko888 commented 1 year ago

另外问个问题，在系统里apt update 应该不会影响内核吧。如果觉得某个版本稳定，是不是可以不跟进armbian 的build版本，只用apt更新系统就行了。

以前曾经有过apt upgrade 更新替换了F大了内核文件导致开不了机的报告，后来O大应该修复了吧，最近的版本都没有听过有这些事儿。

ophub commented 1 year ago

https://github.com/ophub/amlogic-s9xxx-armbian/blob/41be46f7de59a2ce1cd23000e3ccc011357cc056/build-armbian/armbian-files/common-files/usr/sbin/armbian-fix#L43-L46

原来的已经移除了，所以更新不会有影响。

ophub commented 1 year ago

6.0的内核听说这个可能是LTS，这个内核有什么通病的问题？

janko888 commented 1 year ago

6.0的内核听说这个可能是LTS，这个内核有什么通病的问题？

还是之前说6.0的meson-g12-common.dtsi这个问题，上一次修改里ethmac主动添加了
resets = <&reset RESET_ETHERNET>; reset-names = "stmmaceth";

这个修改我不太明白其用意，但的确影响了继承自这个dtsi的3个(或许有更多有继承这个基类dtb的盒子？)s905l3a的网卡获取IP了

janko888 commented 1 year ago

5.15等几个内核倒没有修改这个。

ophub commented 1 year ago

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi?h=v6.0.13#n168

原来的没有，可能是哪个补丁带来的。你把其他的几个6.0的dts都修一下吧，几个都在6.0都报网卡无法识别的问题。

等几天f大发了6.1再看一下是不是也有这个问题

janko888 commented 1 year ago

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi?h=v6.0.13#n168

原来的没有，可能是哪个补丁带来的。你把其他的几个6.0的dts都修一下吧，几个都在6.0都报网卡无法识别的问题。

等几天f大发了6.1再看一下是不是也有这个问题

好的。

janko888 commented 1 year ago

等几天f大发了6.1再看一下是不是也有这个问题

11111

初步看了一下，用到meson-g12-common.dtsi这个基类dtb的有非常多型号，我不知道是否某些盒子必须要有那个两个属性的。这个得灯O大得跟F大沟通确认一下，我先把有把握得调用u200.dts那两个修改先提交了哈：）

ruanimal commented 1 year ago

#517 (comment)

这个

下载下来看了一下，和 https://github.com/ophub/kernel/releases/download/tools/android_tv_cm311-1a-yst_s905l3a.tar.xz 镜像是一样的

@kaliefgrieve00-gmail 我记得这个刷完是不能从U盘启动的啊，你是怎么操作的。

还有这个 “把【擦除flash】和【擦除bootloader】两项去勾” 有什么作用

ophub commented 1 year ago

s905l3a的这几个都有反馈网卡不正常工作，都可以用你的方法修复。

janko888 commented 1 year ago

嗯，也可能这个修改只在l3a这个soc有问题，持续观察咯

kaliefgrieve00-gmail commented 1 year ago

#517 (comment) 这个

下载下来看了一下，和 https://github.com/ophub/kernel/releases/download/tools/android_tv_cm311-1a-yst_s905l3a.tar.xz 镜像是一样的

@kaliefgrieve00-gmail 我记得这个刷完是不能从U盘启动的啊，你是怎么操作的。

还有这个 “把【擦除flash】和【擦除bootloader】两项去勾” 有什么作用

刷完安卓之后,用电视开心助手,设置从u盘启动

kaliefgrieve00-gmail commented 1 year ago

把【擦除flash】和【擦除bootloader】两项去勾” 有什么作用

把【擦除flash】和【擦除bootloader】两项去勾” 有什么作用

这个不勾选,从u盘启动,还是会提示安卓镜像的恢复模式选项

kaliefgrieve00-gmail commented 1 year ago

我现在有点迷茫了.不知道怎么了最新的5.15的debian 又都正常了

整理下 ,希望能帮助到有需要的人

armbian-install -m yes log

➜  ~ ssh root@192.168.2.234
The authenticity of host '192.168.2.234 (192.168.2.234)' can't be established.
ED25519 key fingerprint is SHA256:dyOLyJbZGItOPJmOIFRNKyr2sccA9rGMsIFi4EweEwM.
This key is not known by any other names.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.2.234' (ED25519) to the list of known hosts.

root@192.168.2.234's password:
    _              _   ____  ___   ___  ____  _ _____
   / \   _ __ ___ | | / ___|/ _ \ / _ \| ___|| |___ /  __ _
  / _ \ | '_ ` _ \| | \___ \ (_) | | | |___ \| | |_ \ / _` |
 / ___ \| | | | | | |  ___) \__, | |_| |___) | |___) | (_| |
/_/   \_\_| |_| |_|_| |____/  /_/ \___/|____/|_|____/ \__,_|

Welcome to Armbian 23.02.0-trunk Bullseye with Linux 5.15.82-flippy-79+o

System load:   81%              Up time:       5 min
Memory usage:  8% of 1.91G      IP:            192.168.2.234
CPU temp:      39°C             Usage of /:    59% of 2.4G
storage/:      40% of 252M
RX today:      31.5 KiB

Last login: Wed Dec 14 23:01:50 2022
root@armbian:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
    link/sit 0.0.0.0 brd 0.0.0.0
3: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1000
    link/tunnel6 :: brd :: permaddr 8266:e3f2:e246::
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 9e:61:a7:8a:88:aa brd ff:ff:ff:ff:ff:ff permaddr 02:00:00:0e:35:01
    inet 192.168.2.234/24 brd 192.168.2.255 scope global dynamic noprefixroute eth0
       valid_lft 86385sec preferred_lft 86385sec
    inet6 fe80::7f23:d658:eb34:c198/64 scope link noprefixroute
       valid_lft forever preferred_lft forever

root@armbian:~# armbian-install -m yes
[ STEPS ] Start install armbian to emmc...
[ INFO ] Custom setting parameters: [ -m yes ]
[ STEPS ] Start initializing the environment...
[ INFO ] Use mainline u-boot: [ yes ]
[ INFO ] Using the Ampart tool: [ yes ]
[ INFO ] Show all lists: [ no ]
[ INFO ] DEV_EMMC: [ /dev/mmcblk2 ]
[ STEPS ] Start selecting device...
--------------------------------------------------------------------------------------
ID    SOC        MODEL                          DTB                             
--------------------------------------------------------------------------------------
301   s905x2     X96-Max-4GB/Tx5-Max            meson-g12a-x96-max.dtb          
302   s905x2     X96-Max-2GB                    meson-g12a-x96-max-rmii.dtb     
303   s905x2     MECOOL-KM3-4G                  meson-g12a-sei510.dtb           
304   s905l3a    E900V22C-D                     meson-g12a-s905l3a-e900v22c.dtb 
305   s905l3a    CM311-1a-YST                   meson-g12a-s905l3a-cm311.dtb    
306   s905l3a    M401A/ZTE-B863AV3.2-M          meson-g12a-s905l3a-m401a.dtb    
0     Other      Customize                      Enter-custom-dtb-name           
--------------------------------------------------------------------------------------
[ OPTIONS ] Please Input ID: 305
[ INFO ] Input Box ID: [ 305 ]
[ INFO ] FDTFILE: [ meson-g12a-s905l3a-cm311.dtb ]
[ INFO ] MAINLINE_UBOOT: [  ]
[ INFO ] BOOTLOADER_IMG:  [  ]
[ INFO ] UBOOT_OVERLOAD: [ u-boot-e900v22c.bin ]
[ INFO ] K510: [ 0 ]
[ STEPS ] Start selecting file system type...
-----------------------------------------------
ID  TYPE
-----------------------------------------------
1   ext4
2   btrfs
-----------------------------------------------
[ OPTIONS ] Please Input ID: 1
[ INFO ] Input Type ID: [ 1 ]
[ INFO ] The type of file system: [ ext4 ]
[ STEPS ] Start creating eMMC partition...
[ INFO ] Start backup default bootloader.
4+0 records in
4+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 2.81068 s, 1.5 MB/s
1+0 records in
1+0 records out
512 bytes copied, 0.00867236 s, 59.0 kB/s
[ STEPS ] Use ampart partition successfully.
[ INFO ] Start create MBR and partittion.
[ INFO ] Restore the mybox bootloader: [ /usr/lib/u-boot/mybox-bootloader.img ]
444+0 records in
444+0 records out
444 bytes copied, 0.0029564 s, 150 kB/s
8191+0 records in
8191+0 records out
4193792 bytes (4.2 MB, 4.0 MiB) copied, 0.295068 s, 14.2 MB/s
[ STEPS ] Start processing the bootfs partition...
[ INFO ] Formatting BOOTFS partition.
mkfs.fat 4.2 (2021-01-31)
[ INFO ] Start copy BOOTFS partition data.
[ INFO ] Generate the new [ uEnv.txt ] file.
[ INFO ] Copy [ u-boot-e900v22c.bin ] to u-boot.emmc
[ STEPS ] Start processing the rootfs partition...
[ INFO ] Formatting ROOTFS partition.
[ INFO ] Start copy ROOTFS partition data.
[ INFO ] Copy the [ etc ] directory.
[ INFO ] Copy the [ home ] directory.
[ INFO ] Copy the [ lib64 ] directory.
[ INFO ] Copy the [ opt ] directory.
[ INFO ] Copy the [ root ] directory.
[ INFO ] Copy the [ selinux ] directory.
[ INFO ] Copy the [ srv ] directory.
[ INFO ] Copy the [ usr ] directory.
[ INFO ] Copy the [ var ] directory.
[ INFO ] Generate the new fstab file.
[ INFO ] Update the relevant parameters.
[ SUCCESS ] Successful installed, please unplug the USB, re-insert the power supply to start the armbian.

armbian-update 升级系统 log

➜  ~ ssh root@192.168.2.154
The authenticity of host '192.168.2.154 (192.168.2.154)' can't be established.
ED25519 key fingerprint is SHA256:Cvo+cThSgjLX3WV1Z1xYXUVhX80/3LYWmKNxuyoKy34.
This key is not known by any other names.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.2.154' (ED25519) to the list of known hosts.
root@192.168.2.154's password:
    _              _   ____  ___   ___  ____  _ _____
   / \   _ __ ___ | | / ___|/ _ \ / _ \| ___|| |___ /  __ _
  / _ \ | '_ ` _ \| | \___ \ (_) | | | |___ \| | |_ \ / _` |
 / ___ \| | | | | | |  ___) \__, | |_| |___) | |___) | (_| |
/_/   \_\_| |_| |_|_| |____/  /_/ \___/|____/|_|____/ \__,_|

Welcome to Armbian 23.02.0-trunk Bullseye with Linux 5.15.82-flippy-79+o

System load:   12%              Up time:       1 min
Memory usage:  6% of 1.91G      IP:            192.168.2.154
CPU temp:      37°C             Usage of /:    11% of 14G
RX today:      44.8 KiB

Last login: Wed Dec 14 23:13:42 2022

root@armbian:~# passwd
New password:
Retype new password:
passwd: password updated successfully

root@armbian:~# nano /etc/apt/sources.list

root@armbian:~# sudo apt install apt-transport-https ca-certificates
Reading package lists... Done
Building dependency tree... Done
Note, selecting 'apt' instead of 'apt-transport-https'
apt is already the newest version (2.2.4).
ca-certificates is already the newest version (20210119).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

root@armbian:~# armbian-update
[ STEPS ] Ready to update, please wait...
[ STEPS ] Start installing the necessary dependencies...
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye InRelease [116 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates InRelease [44.1 kB]
Get:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports InRelease [49.0 kB]
Get:4 https://mirrors.tuna.tsinghua.edu.cn/debian-security bullseye-security InRelease [48.4 kB]
Get:5 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main armhf Packages [10.8 MB]
Get:6 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 Packages [10.9 MB]
Get:7 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main armhf Contents (deb) [9,306 kB]
Get:8 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main all Contents (deb) [31.0 MB]
Get:9 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 Contents (deb) [9,831 kB]
Get:10 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/contrib armhf Packages [47.8 kB]
Get:11 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/contrib arm64 Packages [49.0 kB]
Get:12 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/contrib arm64 Contents (deb) [29.6 kB]
Get:13 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/contrib armhf Contents (deb) [29.2 kB]
Get:14 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/contrib all Contents (deb) [57.3 kB]
Get:15 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/non-free armhf Packages [67.2 kB]
Get:16 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/non-free arm64 Packages [88.5 kB]
Get:17 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/non-free arm64 Contents (deb) [37.2 kB]
Get:18 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/non-free all Contents (deb) [888 kB]
Get:19 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/non-free armhf Contents (deb) [13.4 kB]
Get:20 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates/main armhf Packages [12.0 kB]
Get:21 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates/main arm64 Packages [12.0 kB]
Get:22 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates/main all Contents (deb) [25.0 kB]
Get:23 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates/main arm64 Contents (deb) [42.8 kB]
Get:24 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates/main armhf Contents (deb) [45.0 kB]
Get:25 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/main arm64 Packages [365 kB]
Get:26 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/main armhf Packages [362 kB]
Get:27 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/main armhf Contents (deb) [1,529 kB]
Get:28 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/main arm64 Contents (deb) [1,374 kB]
Get:29 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/main all Contents (deb) [4,703 kB]
Get:30 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/contrib armhf Packages [3,316 B]
Get:31 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/contrib arm64 Packages [3,844 B]
Get:32 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/contrib armhf Contents (deb) [16.1 kB]
Get:33 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/contrib all Contents (deb) [7,636 B]
Get:34 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/contrib arm64 Contents (deb) [16.3 kB]
Get:35 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/non-free arm64 Packages [9,864 B]
Get:36 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/non-free armhf Packages [9,060 B]
Get:37 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/non-free all Contents (deb) [57.6 kB]
Get:38 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/non-free armhf Contents (deb) [3,663 B]
Get:39 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/non-free arm64 Contents (deb) [5,710 B]
Get:40 https://mirrors.tuna.tsinghua.edu.cn/debian-security bullseye-security/main arm64 Packages [260 kB]
Get:41 https://mirrors.tuna.tsinghua.edu.cn/debian-security bullseye-security/main armhf Packages [260 kB]
Fetched 82.6 MB in 54s (1,526 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree... Done
coreutils is already the newest version (8.32-4).
tar is already the newest version (1.34+dfsg-1).
The following additional packages will be installed:
  libapr1 libaprutil1 libserf-1-1 libsvn1 libutf8proc2
Suggested packages:
  db5.3-util libapache2-mod-svn subversion-tools
The following NEW packages will be installed:
  libapr1 libaprutil1 libserf-1-1 libsvn1 libutf8proc2 subversion
0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
Need to get 2,593 kB of archives.
After this operation, 10.3 MB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libapr1 arm64 1.7.0-6+deb11u1 [98.8 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libaprutil1 arm64 1.6.1-5 [89.6 kB]
Get:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libserf-1-1 arm64 1.3.9-10 [52.6 kB]
Get:4 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libutf8proc2 arm64 2.5.0-1 [54.2 kB]
Get:5 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libsvn1 arm64 1.14.1-3+deb11u1 [1,320 kB]
Get:6 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 subversion arm64 1.14.1-3+deb11u1 [978 kB]
Fetched 2,593 kB in 1s (2,411 kB/s)
Selecting previously unselected package libapr1:arm64.
(Reading database ... 37385 files and directories currently installed.)
Preparing to unpack .../0-libapr1_1.7.0-6+deb11u1_arm64.deb ...
Unpacking libapr1:arm64 (1.7.0-6+deb11u1) ...
Selecting previously unselected package libaprutil1:arm64.
Preparing to unpack .../1-libaprutil1_1.6.1-5_arm64.deb ...
Unpacking libaprutil1:arm64 (1.6.1-5) ...
Selecting previously unselected package libserf-1-1:arm64.
Preparing to unpack .../2-libserf-1-1_1.3.9-10_arm64.deb ...
Unpacking libserf-1-1:arm64 (1.3.9-10) ...
Selecting previously unselected package libutf8proc2:arm64.
Preparing to unpack .../3-libutf8proc2_2.5.0-1_arm64.deb ...
Unpacking libutf8proc2:arm64 (2.5.0-1) ...
Selecting previously unselected package libsvn1:arm64.
Preparing to unpack .../4-libsvn1_1.14.1-3+deb11u1_arm64.deb ...
Unpacking libsvn1:arm64 (1.14.1-3+deb11u1) ...
Selecting previously unselected package subversion.
Preparing to unpack .../5-subversion_1.14.1-3+deb11u1_arm64.deb ...
Unpacking subversion (1.14.1-3+deb11u1) ...
Setting up libutf8proc2:arm64 (2.5.0-1) ...
Setting up libapr1:arm64 (1.7.0-6+deb11u1) ...
Setting up libaprutil1:arm64 (1.6.1-5) ...
Setting up libserf-1-1:arm64 (1.3.9-10) ...
Setting up libsvn1:arm64 (1.14.1-3+deb11u1) ...
Setting up subversion (1.14.1-3+deb11u1) ...
Processing triggers for libc-bin (2.31-13+deb11u5) ...
Processing triggers for man-db (2.9.4-2) ...
[ STEPS ] Start initializing the environment...
[ INFO ] Armbian PLATFORM: [ amlogic ]
[ INFO ] Set the kernel name: [  ]
[ INFO ] Set the kernel directory: [ stable ]
[ INFO ] Current version: 5.15.82, Latest version: 5.15.83
[ STEPS ] Start downloading the kernel from [ https://github.com/ophub/kernel/tree/main/pub/stable/5.15.83 ]...
A    .
A    boot-5.15.83-flippy-80+o.tar.gz
A    dtb-allwinner-5.15.83-flippy-80+o.tar.gz
A    dtb-amlogic-5.15.83-flippy-80+o.tar.gz
A    dtb-rockchip-5.15.83-flippy-80+o.tar.gz
A    header-5.15.83-flippy-80+o.tar.gz
A    modules-5.15.83-flippy-80+o.tar.gz
A    sha256sums
Exported revision 644.

[ STEPS ] Start checking the kernel...
[ INFO ] Kernel name: [ 5.15.83-flippy-80+o ]
[ INFO ] K510: [ 0 ]
[ INFO ] Enable sha256sum checking...
[ INFO ] (1/4) [ boot-5.15.83-flippy-80+o.tar.gz ] file sha256sum check same.
[ INFO ] (2/4) [ dtb-amlogic-5.15.83-flippy-80+o.tar.gz ] file sha256sum check same.
[ INFO ] (3/4) [ header-5.15.83-flippy-80+o.tar.gz ] file sha256sum check same.
[ INFO ] (4/4) [ modules-5.15.83-flippy-80+o.tar.gz ] file sha256sum check same.

[ STEPS ] Start unpacking the kernel...
[ INFO ] (1/4) Unpacking [ boot-5.15.83-flippy-80+o.tar.gz ] done.
[ INFO ] (2/4) Unpacking [ dtb-amlogic-5.15.83-flippy-80+o.tar.gz ] done.
[ INFO ] (3/4) Unpacking [ header-5.15.83-flippy-80+o.tar.gz ] done.
[ INFO ] (4/4) Unpacking [ modules-5.15.83-flippy-80+o.tar.gz ] done.

[ STEPS ] Start updating the uboot...

[ SUCCESS ] Successfully updated, automatic restarting...
Connection to 192.168.2.154 closed by remote host.
Connection to 192.168.2.154 closed.

ophub / amlogic-s9xxx-armbian

s905l3a CM311-1a-YST: Cannot attach to PHY (error: -19) #812

517