Closed kaliefgrieve00-gmail closed 1 year ago
直接 armbian-install 不带参数就好了,不过能不能获取网卡,不是这里安装参数的事。 armbian-install -m yes 是主线,我就是过不能emmc启动,带参数就好使。
直接 armbian-install 不带参数就好了,不过能不能获取网卡,不是这里安装参数的事。 armbian-install -m yes 是主线,我就是过不能emmc启动,带参数就好使。
你说的不能emmc启动 和这个一样码? s905l3a CM311-1a-YST armbian-install 重启之后, hdmi没有输出, cm311的灯也不亮 #818
我现在要重新执行 armbian-install -m yes .只能刷回安卓,再u盘启动, 之后 armbian-install -m yes 吗?
默认的armbian-install即可,如果没用-m yes也可以正常使用,就不用带。
更新默认armbian-update即可
s905l3a CM311-1a-YST armbian-install 重启之后, hdmi没有输出, cm311的灯也不亮 #818 我用默认的 armbian-install 会出现 下面的现象
s905l3a CM311-1a-YST armbian-install 重启之后, hdmi没有输出, cm311的灯也不亮 https://github.com/ophub/amlogic-s9xxx-armbian/issues/818
2 我现在要重新执行 armbian-install -m yes .只能刷回安卓,再u盘启动, 之后 armbian-install -m yes 吗?
3 我现在在试 armbian-install -m yes
armbian-install 的log
root@armbian:~# armbian-install
[ STEPS ] Start install armbian to emmc...
[ STEPS ] Start initializing the environment...
[ INFO ] DEV_EMMC: [ /dev/mmcblk2 ]
[ STEPS ] Start selecting device...
--------------------------------------------------------------------------------------
ID SOC MODEL DTB
--------------------------------------------------------------------------------------
101 s905d Phicomm-N1 meson-gxl-s905d-phicomm-n1.dtb
102 s905d Phicomm-N1-(DMA-thresh) meson-gxl-s905d-phicomm-n1-thresh.dtb
103 s905x HG680P-&-TBee meson-gxl-s905x-p212.dtb
104 s905w X96-Mini-&-TX3-Mini meson-gxl-s905w-tx3-mini.dtb
105 s905d MECOOL-KI-Pro meson-gxl-s905d-mecool-ki-pro.dtb
106 s905x T95 meson-gxl-s905x-p212.dtb
107 s905x B860H meson-gxl-s905x-b860h.dtb
201 s912 Octopus-Planet meson-gxm-octopus-planet.dtb
202 s912 Octopus-Planet-(FAKE) meson-gxm-octopus-planet.dtb
203 s912 H96-Pro-Plus meson-gxm-octopus-planet.dtb
204 s912 Tanix-TX92 meson-gxm-octopus-planet.dtb
205 s912 VORKE-Z6-Plus meson-gxm-octopus-planet.dtb
206 s912 MECOOL-M8S-Pro-L meson-gxm-q201.dtb
207 s912 T95Z-Plus meson-gxm-t95z-plus.dtb
208 s912 TX9-Pro meson-gxm-tx9-pro.dtb
209 s912 Nexbox-A1-&-A95X meson-gxm-nexbox-a1.dtb
210 s912 Nexbox-A95X-A2 meson-gxm-nexbox-a2.dtb
301 s905x2 X96-Max-4GB meson-g12a-x96-max.dtb
302 s905x2 X96-Max-2GB meson-g12a-x96-max-rmii.dtb
303 s905x2 MECOOL-KM3-4G meson-g12a-sei510.dtb
304 s905l3a E900V22C-D meson-g12a-s905l3a-e900v22c.dtb
401 s922x Beelink-GT-King meson-g12b-gtking.dtb
402 s922x Beelink-GT-King-Pro meson-g12b-gtking-pro.dtb
403 s922x Beelink-GT-King-Pro-H meson-g12b-gtking-pro-h.dtb
404 s922x Beelink-GT-King-Pro-Rev_A meson-g12b-gtking-pro.dtb
405 s922x Hardkernel-ODroid-N2 meson-g12b-odroid-n2.dtb
406 s922x UGOOS-AM6-Plus meson-g12b-ugoos-am6.dtb
407 a311d Khadas-VIM3 meson-g12b-a311d-khadas-vim3.dtb
501 s905x3 X96-Max+ meson-sm1-x96-max-plus.dtb
502 s905x3 X96-Max+-(OverClock) meson-sm1-x96-max-plus-oc.dtb
503 s905x3 X96-Max+-(IP1001M-phy) meson-sm1-x96-max-plus-ip1001m.dtb
504 s905x3 X96-Max+-Q2 meson-sm1-x96-max-plus-q2.dtb
505 s905x3 X96-Max+-100Mb meson-sm1-x96-air.dtb
506 s905x3 HK1-Box meson-sm1-hk1box-vontar-x3.dtb
507 s905x3 HK1-Box-(OverClock) meson-sm1-hk1box-vontar-x3-oc.dtb
508 s905x3 H96-Max-X3 meson-sm1-h96-max-x3.dtb
509 s905x3 H96-Max-X3-(OverClock) meson-sm1-h96-max-x3-oc.dtb
510 s905x3 Ugoos-X3 meson-sm1-ugoos-x3.dtb
511 s905x3 Ugoos-X3-(OverClock) meson-sm1-ugoos-x3-oc.dtb
512 s905x3 TX3-1Gb meson-sm1-tx3-qz.dtb
513 s905x3 TX3-1Gb-(OverClock) meson-sm1-tx3-qz-oc.dtb
514 s905x3 TX3-100Mb meson-sm1-tx3-bz.dtb
515 s905x3 TX3-100Mb-(OverClock) meson-sm1-tx3-bz-oc.dtb
516 s905x3 X96-Air-1Gb meson-sm1-x96-air-gbit.dtb
517 s905x3 X96-Air-100Mb meson-sm1-x96-air.dtb
518 s905x3 X96-Air-Q1000 meson-sm1-x96-max-plus-q2.dtb
519 s905x3 A95XF3-Air-1Gb meson-sm1-a95xf3-air-gbit.dtb
520 s905x3 A95XF3-Air-100Mb meson-sm1-a95xf3-air.dtb
0 Other Customize Enter-custom-dtb-name
--------------------------------------------------------------------------------------
[ OPTIONS ] Please Input ID: 304
[ INFO ] Input Box ID: [ 304 ]
[ INFO ] FDTFILE: [ meson-g12a-s905l3a-e900v22c.dtb ]
[ INFO ] UBOOT_OVERLOAD: [ u-boot-e900v22c.bin ]
[ INFO ] K510: [ 0 ]
[ STEPS ] Start selecting file system type...
-----------------------------------------------
ID TYPE
-----------------------------------------------
1 ext4
2 btrfs
-----------------------------------------------
[ OPTIONS ] Please Input ID: 1
[ INFO ] Input Type ID: [ 1 ]
[ INFO ] The type of file system: [ ext4 ]
[ STEPS ] Start creating eMMC partition...
1+0 records in
1+0 records out
512 bytes copied, 0.0084684 s, 60.5 kB/s
[ INFO ] Start create MBR and partittion.
[ INFO ] Write Mainline bootloader: [ /usr/lib/u-boot/e900v22c-u-boot.bin.sd.bin ]
444+0 records in
444+0 records out
444 bytes copied, 0.00553381 s, 80.2 kB/s
2023+1 records in
2023+1 records out
1036144 bytes (1.0 MB, 1012 KiB) copied, 0.145071 s, 7.1 MB/s
[ STEPS ] Start processing the bootfs partition...
[ INFO ] Formatting BOOTFS partition.
mkfs.fat 4.2 (2021-01-31)
[ INFO ] Start copy BOOTFS partition data.
[ INFO ] Generate the new uEnv.txt file.
[ STEPS ] Start processing the rootfs partition...
[ INFO ] Formatting ROOTFS partition.
[ INFO ] Start copy ROOTFS partition data.
[ INFO ] Copy the [ etc ] directory.
[ INFO ] Copy the [ home ] directory.
[ INFO ] Copy the [ lib64 ] directory.
[ INFO ] Copy the [ opt ] directory.
[ INFO ] Copy the [ root ] directory.
[ INFO ] Copy the [ selinux ] directory.
[ INFO ] Copy the [ srv ] directory.
[ INFO ] Copy the [ usr ] directory.
[ INFO ] Copy the [ var ] directory.
[ INFO ] Generate the new fstab file.
[ INFO ] Update the relevant parameters.
[ SUCCESS ] Successful installed, please unplug the USB, re-insert the power supply to start the armbian.
[ INFO ] Write Mainline bootloader: [ /usr/lib/u-boot/e900v22c-u-boot.bin.sd.bin ] 启动也显示的 用的主线uboot
armbian-install -m yes 的log
root@armbian:~# armbian-install -m yes
[ STEPS ] Start install armbian to emmc...
[ STEPS ] Start initializing the environment...
[ INFO ] DEV_EMMC: [ /dev/mmcblk2 ]
[ STEPS ] Start selecting device...
--------------------------------------------------------------------------------------
ID SOC MODEL DTB
--------------------------------------------------------------------------------------
101 s905d Phicomm-N1 meson-gxl-s905d-phicomm-n1.dtb
102 s905d Phicomm-N1-(DMA-thresh) meson-gxl-s905d-phicomm-n1-thresh.dtb
103 s905x HG680P-&-TBee meson-gxl-s905x-p212.dtb
104 s905w X96-Mini-&-TX3-Mini meson-gxl-s905w-tx3-mini.dtb
105 s905d MECOOL-KI-Pro meson-gxl-s905d-mecool-ki-pro.dtb
106 s905x T95 meson-gxl-s905x-p212.dtb
107 s905x B860H meson-gxl-s905x-b860h.dtb
201 s912 Octopus-Planet meson-gxm-octopus-planet.dtb
202 s912 Octopus-Planet-(FAKE) meson-gxm-octopus-planet.dtb
203 s912 H96-Pro-Plus meson-gxm-octopus-planet.dtb
204 s912 Tanix-TX92 meson-gxm-octopus-planet.dtb
205 s912 VORKE-Z6-Plus meson-gxm-octopus-planet.dtb
206 s912 MECOOL-M8S-Pro-L meson-gxm-q201.dtb
207 s912 T95Z-Plus meson-gxm-t95z-plus.dtb
208 s912 TX9-Pro meson-gxm-tx9-pro.dtb
209 s912 Nexbox-A1-&-A95X meson-gxm-nexbox-a1.dtb
210 s912 Nexbox-A95X-A2 meson-gxm-nexbox-a2.dtb
301 s905x2 X96-Max-4GB meson-g12a-x96-max.dtb
302 s905x2 X96-Max-2GB meson-g12a-x96-max-rmii.dtb
303 s905x2 MECOOL-KM3-4G meson-g12a-sei510.dtb
304 s905l3a E900V22C-D meson-g12a-s905l3a-e900v22c.dtb
401 s922x Beelink-GT-King meson-g12b-gtking.dtb
402 s922x Beelink-GT-King-Pro meson-g12b-gtking-pro.dtb
403 s922x Beelink-GT-King-Pro-H meson-g12b-gtking-pro-h.dtb
404 s922x Beelink-GT-King-Pro-Rev_A meson-g12b-gtking-pro.dtb
405 s922x Hardkernel-ODroid-N2 meson-g12b-odroid-n2.dtb
406 s922x UGOOS-AM6-Plus meson-g12b-ugoos-am6.dtb
407 a311d Khadas-VIM3 meson-g12b-a311d-khadas-vim3.dtb
501 s905x3 X96-Max+ meson-sm1-x96-max-plus.dtb
502 s905x3 X96-Max+-(OverClock) meson-sm1-x96-max-plus-oc.dtb
503 s905x3 X96-Max+-(IP1001M-phy) meson-sm1-x96-max-plus-ip1001m.dtb
504 s905x3 X96-Max+-Q2 meson-sm1-x96-max-plus-q2.dtb
505 s905x3 X96-Max+-100Mb meson-sm1-x96-air.dtb
506 s905x3 HK1-Box meson-sm1-hk1box-vontar-x3.dtb
507 s905x3 HK1-Box-(OverClock) meson-sm1-hk1box-vontar-x3-oc.dtb
508 s905x3 H96-Max-X3 meson-sm1-h96-max-x3.dtb
509 s905x3 H96-Max-X3-(OverClock) meson-sm1-h96-max-x3-oc.dtb
510 s905x3 Ugoos-X3 meson-sm1-ugoos-x3.dtb
511 s905x3 Ugoos-X3-(OverClock) meson-sm1-ugoos-x3-oc.dtb
512 s905x3 TX3-1Gb meson-sm1-tx3-qz.dtb
513 s905x3 TX3-1Gb-(OverClock) meson-sm1-tx3-qz-oc.dtb
514 s905x3 TX3-100Mb meson-sm1-tx3-bz.dtb
515 s905x3 TX3-100Mb-(OverClock) meson-sm1-tx3-bz-oc.dtb
516 s905x3 X96-Air-1Gb meson-sm1-x96-air-gbit.dtb
517 s905x3 X96-Air-100Mb meson-sm1-x96-air.dtb
518 s905x3 X96-Air-Q1000 meson-sm1-x96-max-plus-q2.dtb
519 s905x3 A95XF3-Air-1Gb meson-sm1-a95xf3-air-gbit.dtb
520 s905x3 A95XF3-Air-100Mb meson-sm1-a95xf3-air.dtb
0 Other Customize Enter-custom-dtb-name
--------------------------------------------------------------------------------------
[ OPTIONS ] Please Input ID: 304
[ INFO ] Input Box ID: [ 304 ]
[ INFO ] FDTFILE: [ meson-g12a-s905l3a-e900v22c.dtb ]
[ INFO ] UBOOT_OVERLOAD: [ u-boot-e900v22c.bin ]
[ INFO ] K510: [ 0 ]
[ STEPS ] Start selecting file system type...
-----------------------------------------------
ID TYPE
-----------------------------------------------
1 ext4
2 btrfs
-----------------------------------------------
[ OPTIONS ] Please Input ID: 1
[ INFO ] Input Type ID: [ 1 ]
[ INFO ] The type of file system: [ ext4 ]
[ STEPS ] Start creating eMMC partition...
1+0 records in
1+0 records out
512 bytes copied, 0.00839145 s, 61.0 kB/s
[ INFO ] Start create MBR and partittion.
[ INFO ] Write Mainline bootloader: [ /usr/lib/u-boot/e900v22c-u-boot.bin.sd.bin ]
444+0 records in
444+0 records out
444 bytes copied, 0.00525827 s, 84.4 kB/s
2023+1 records in
2023+1 records out
1036144 bytes (1.0 MB, 1012 KiB) copied, 0.141687 s, 7.3 MB/s
[ STEPS ] Start processing the bootfs partition...
[ INFO ] Formatting BOOTFS partition.
mkfs.fat 4.2 (2021-01-31)
[ INFO ] Start copy BOOTFS partition data.
[ INFO ] Generate the new uEnv.txt file.
[ STEPS ] Start processing the rootfs partition...
[ INFO ] Formatting ROOTFS partition.
[ INFO ] Start copy ROOTFS partition data.
[ INFO ] Copy the [ etc ] directory.
[ INFO ] Copy the [ home ] directory.
[ INFO ] Copy the [ lib64 ] directory.
[ INFO ] Copy the [ opt ] directory.
[ INFO ] Copy the [ root ] directory.
[ INFO ] Copy the [ selinux ] directory.
[ INFO ] Copy the [ srv ] directory.
[ INFO ] Copy the [ usr ] directory.
[ INFO ] Copy the [ var ] directory.
[ INFO ] Generate the new fstab file.
[ INFO ] Update the relevant parameters.
[ SUCCESS ] Successful installed, please unplug the USB, re-insert the power supply to start the armbian.
armbian-install 和 armbian-install -m yes 运行的log是一样的,只是运行log的时间右差别
你有ttl吗?? (TTL转USB) 接上。 开机 跑码。看看停在那里。你那个日志不如跑码的准确。
G对G , T 接 R ,R接T
你有ttl吗?? (TTL转USB) 接上。 开机 跑码。看看停在那里。你那个日志不如跑码的准确。 1 usb转ttl 有的 2 具体的操作 能帮我搜个教程码? 3 我这个板子最初来的时候,是ubuntu的 我刷个5.15的ubutnu试试 4 你也是我的这个盒子码? cm311-1a-yst . 现在是用的那个镜像呢? 5 刷armbian和之前的安卓有关系码? 你用的是哪个安卓? 有下载连接?
https://www.bilibili.com/read/cv19712333?from=search 魔百盒cm311-5s电视盒子ttl安装当贝桌面 这个还要焊接 有点复杂了
你用的旧版固件,参数-m无效。
你用的旧版固件,参数-m无效。
我现在试试最新的 ubutnu的 img.
我都有点搞不懂 到底是哪个环节出问题了
用了ubuntu 第一次见这么多的进度
在某处看到的帖子,下载帖子里的固件,就照着帖子里的教程安装使用。 看老版固件的使用说明,有些在新版里已经不适用了。
我用了你最新编译的 ubuntu 是可以正常启动网卡 也可以 正常安装.安装之后也可以正常工作
➜ ~ ssh root@192.168.2.235
The authenticity of host '192.168.2.235 (192.168.2.235)' can't be established.
ED25519 key fingerprint is SHA256:01NG1ZCaBZRCQoIA9TxCEpXtilPLTPQwGglsEbqrxxs.
This key is not known by any other names.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.2.235' (ED25519) to the list of known hosts.
root@192.168.2.235's password:
_ _ ____ ___ ___ ____ _ _____
/ \ _ __ ___ | | / ___|/ _ \ / _ \| ___|| |___ / __ _
/ _ \ | '_ ` _ \| | \___ \ (_) | | | |___ \| | |_ \ / _` |
/ ___ \| | | | | | | ___) \__, | |_| |___) | |___) | (_| |
/_/ \_\_| |_| |_|_| |____/ /_/ \___/|____/|_|____/ \__,_|
Welcome to Armbian 23.02.0-trunk Jammy with Linux 5.15.82-flippy-79+o
System load: 7% Up time: 5 min
Memory usage: 7% of 1.91G IP: 192.168.2.235
CPU temp: 36°C Usage of /: 86% of 2.4G
storage/: 40% of 252M
RX today: 60 B
[ General system configuration (beta): armbian-config ]
Last login: Wed Dec 14 22:17:51 2022
armbian:~:# armbian-install -m yes
[ STEPS ] Start install armbian to emmc...
[ INFO ] Custom setting parameters: [ -m yes ]
[ STEPS ] Start initializing the environment...
[ INFO ] Use mainline u-boot: [ yes ]
[ INFO ] Using the Ampart tool: [ yes ]
[ INFO ] Show all lists: [ no ]
[ INFO ] DEV_EMMC: [ /dev/mmcblk2 ]
[ STEPS ] Start selecting device...
--------------------------------------------------------------------------------------
ID SOC MODEL DTB
--------------------------------------------------------------------------------------
301 s905x2 X96-Max-4GB/Tx5-Max meson-g12a-x96-max.dtb
302 s905x2 X96-Max-2GB meson-g12a-x96-max-rmii.dtb
303 s905x2 MECOOL-KM3-4G meson-g12a-sei510.dtb
304 s905l3a E900V22C-D meson-g12a-s905l3a-e900v22c.dtb
305 s905l3a CM311-1a-YST meson-g12a-s905l3a-cm311.dtb
306 s905l3a M401A/ZTE-B863AV3.2-M meson-g12a-s905l3a-m401a.dtb
0 Other Customize Enter-custom-dtb-name
--------------------------------------------------------------------------------------
[ OPTIONS ] Please Input ID: 305
[ INFO ] Input Box ID: [ 305 ]
[ INFO ] FDTFILE: [ meson-g12a-s905l3a-cm311.dtb ]
[ INFO ] MAINLINE_UBOOT: [ ]
[ INFO ] BOOTLOADER_IMG: [ ]
[ INFO ] UBOOT_OVERLOAD: [ u-boot-e900v22c.bin ]
[ INFO ] K510: [ 0 ]
[ STEPS ] Start selecting file system type...
-----------------------------------------------
ID TYPE
-----------------------------------------------
1 ext4
2 btrfs
-----------------------------------------------
[ OPTIONS ] Please Input ID: 1
[ INFO ] Input Type ID: [ 1 ]
[ INFO ] The type of file system: [ ext4 ]
[ STEPS ] Start creating eMMC partition...
[ INFO ] Start backup default bootloader.
4+0 records in
4+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 1.83273 s, 2.3 MB/s
1+0 records in
1+0 records out
512 bytes copied, 0.00854924 s, 59.9 kB/s
[ STEPS ] Use ampart partition successfully.
[ INFO ] Start create MBR and partittion.
[ INFO ] Restore the mybox bootloader: [ /usr/lib/u-boot/mybox-bootloader.img ]
444+0 records in
444+0 records out
444 bytes copied, 0.00278315 s, 160 kB/s
8191+0 records in
8191+0 records out
4193792 bytes (4.2 MB, 4.0 MiB) copied, 0.314285 s, 13.3 MB/s
[ STEPS ] Start processing the bootfs partition...
[ INFO ] Formatting BOOTFS partition.
mkfs.fat 4.2 (2021-01-31)
[ INFO ] Start copy BOOTFS partition data.
[ INFO ] Generate the new [ uEnv.txt ] file.
[ INFO ] Copy [ u-boot-e900v22c.bin ] to u-boot.emmc
[ STEPS ] Start processing the rootfs partition...
[ INFO ] Formatting ROOTFS partition.
[ INFO ] Start copy ROOTFS partition data.
[ INFO ] Copy the [ etc ] directory.
[ INFO ] Copy the [ home ] directory.
[ INFO ] Copy the [ lib64 ] directory.
[ INFO ] Copy the [ opt ] directory.
[ INFO ] Copy the [ root ] directory.
[ INFO ] Copy the [ selinux ] directory.
[ INFO ] Copy the [ srv ] directory.
[ INFO ] Copy the [ usr ] directory.
[ INFO ] Copy the [ var ] directory.
[ INFO ] Generate the new fstab file.
[ INFO ] Update the relevant parameters.
[ SUCCESS ] Successful installed, please unplug the USB, re-insert the power supply to start the armbian.
正常使用
➜ ~ ssh root@192.168.2.238
The authenticity of host '192.168.2.238 (192.168.2.238)' can't be established.
ED25519 key fingerprint is SHA256:01NG1ZCaBZRCQoIA9TxCEpXtilPLTPQwGglsEbqrxxs.
This host key is known by the following other names/addresses:
~/.ssh/known_hosts:22: 192.168.2.235
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.2.238' (ED25519) to the list of known hosts.
root@192.168.2.238's password:
_ _ ____ ___ ___ ____ _ _____
/ \ _ __ ___ | | / ___|/ _ \ / _ \| ___|| |___ / __ _
/ _ \ | '_ ` _ \| | \___ \ (_) | | | |___ \| | |_ \ / _` |
/ ___ \| | | | | | | ___) \__, | |_| |___) | |___) | (_| |
/_/ \_\_| |_| |_|_| |____/ /_/ \___/|____/|_|____/ \__,_|
Welcome to Armbian 23.02.0-trunk Jammy with Linux 5.15.82-flippy-79+o
System load: 4% Up time: 3 min
Memory usage: 7% of 1.91G IP: 192.168.2.238
CPU temp: 36°C Usage of /: 15% of 14G
RX today: 44.8 KiB
Last login: Wed Dec 14 22:29:49 2022
armbian:~:#
因为我其他的机器都是debian的 所有我想要用debian的.
我现在就用你这里发布的最新的debian,测试吧. 有问题,还要麻烦你们帮我看看
我想先搞1个能获取IP的armbian 用这个 Armbian_22.08.0_Aml_s905l3a_bullseye_5.15.55_server_2022.07.22.img 可以获取IP 接下来写入到emmc
armbian-install 的这些参数
改怎么选择呢?
2 升级内核 这个也是必须的吗? 可以以后再emmc运行的armbian中执行吗?