Closed fachos closed 1 year ago
The first problem is normal and can be ignored.
The second question is to test others and find a wired network that can work normally.
hi..
can u teach me to disable it?
i enter dtc and delete the bluetooth uart part because my wifi module is rtl8723bs... a good start to learn.. but i mess the some code inside dtc because i notice the lan led link not working, i want learn more... then i add config armbian-led 99.. got this openvfd config from coreelec forum... https://forum.libreelec.tv/core/attachment/4686-a95xpro-vfd-zip/ also working..
can you make dtb for x95pro? with that openvfd config? maybe others need complete armbian img
thank you
If the wired network doesn't work, other modifications are meaningless. You test one by one in the same series which can start normally, and the wired network can be used.
Modify the name of dtb in /boot/uEnv.txt and restart the test.
from begining im using wired because the box sit next to the router... i ssh from my pc... yes i test most s905x-dtb from the dtb/amlogic folder.. nexbox-a95x.dtb no bluetooth which is good for me but not support openvfd.. dmesg all s905x-dtb show same errors like my 1st post... below another error
[ 9.980541] systemd[1]: Failed to start Armbian leds state. [ 8.995171] debugfs: Directory 'c1105400.audio-controller' with parent 'S905X-P212' already present! [ 9.008617] debugfs: File 'HDMITX Capture' in directory 'dapm' already present!
if you can edit meson-gxl-s905x-p212.dtb remove the bluetooth , add eth act/link led function and delete all red msg would be great...
Find one that starts up normally, and the wired network works normally, and modify it on this basis.
i understand that... tested all s905x variant dtb... all same errors show up and no eth act/link led. only nexbox-a95x without bluetooth error but still no working eth act/link led... wired is working... can update upgrade git curl wget
[ 4.710073] genirq: Setting trigger mode 3 for irq 48 failed (meson_gpio_irq_set_type+0x0/0x140) [ 5.750601] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 7.041206] systemd[389]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. [ 7.671701] systemd[1]: systemd-networkd.socket: Socket service systemd-networkd.service not loaded, refusing. [ 7.681793] systemd[1]: Failed to listen on Network Service Netlink Socket. [ 8.977510] debugfs: Directory 'c1105400.audio-controller' with parent 'S905X-P212' already present! [ 9.013626] debugfs: File 'HDMITX Capture' in directory 'dapm' already present! [ 9.101078] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 9.846212] systemd[1]: Failed to start Armbian leds state.
if you can teach me how to... i ready to try and error edit the file... i want remove all 9 line only...
thank you
root@armbian:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.83-flippy-80+o (root@univm25) (Ubuntu clang version 14.0.0-1ubuntu1, Ubuntu LLD 14.0.0) #197 SMP PREEMPT Wed Dec 14 21:13:44 CST 2022
[ 0.000000] Machine model: Amlogic Meson GXL (S905X) P212 Development Board
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000063400000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x0000000077ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 19 pages/cpu s37720 r8192 d31912 u77824
[ 0.000000] pcpu-alloc: s37720 r8192 d31912 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483840
[ 0.000000] Kernel command line: root=UUID=21e9542e-319b-4162-aad9-35997ecde9ae rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=c4:4e:ac:09:2c:89
[ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=c4:4e:ac:09:2c:89", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1581532K/1966080K available (15232K kernel code, 2726K rwdata, 4712K rodata, 1984K init, 887K bss, 122404K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000628] Console: colour dummy device 80x25
[ 0.001046] printk: console [tty0] enabled
[ 0.001106] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.001131] pid_max: default: 32768 minimum: 301
[ 0.001333] LSM: Security Framework initializing
[ 0.001446] SELinux: Initializing.
[ 0.001710] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001737] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.003971] rcu: Hierarchical SRCU implementation.
[ 0.005159] EFI services will not be available.
[ 0.005599] smp: Bringing up secondary CPUs ...
[ 0.006282] Detected VIPT I-cache on CPU1
[ 0.006351] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007117] Detected VIPT I-cache on CPU2
[ 0.007176] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007873] Detected VIPT I-cache on CPU3
[ 0.007926] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.008010] smp: Brought up 1 node, 4 CPUs
[ 0.008084] SMP: Total of 4 processors activated.
[ 0.008096] CPU features: detected: 32-bit EL0 Support
[ 0.008108] CPU features: detected: 32-bit EL1 Support
[ 0.008120] CPU features: detected: CRC32 instructions
[ 0.008940] CPU: All CPU(s) started at EL2
[ 0.008973] alternatives: patching kernel code
[ 0.010857] devtmpfs: initialized
[ 0.018854] Registered cp15_barrier emulation handler
[ 0.018894] Registered setend emulation handler
[ 0.019045] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.019076] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.025523] prandom: seed boundary self test passed
[ 0.026710] prandom: 100 self tests passed
[ 0.049687] prandom32: self test passed (less than 6 bits correlated)
[ 0.049755] pinctrl core: initialized pinctrl subsystem
[ 0.050390] DMI not present or invalid.
[ 0.050898] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.052981] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.053253] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.053459] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.053577] audit: initializing netlink subsys (disabled)
[ 0.053833] audit: type=2000 audit(0.053:1): state=initialized audit_enabled=0 res=1
[ 0.054950] thermal_sys: Registered thermal governor 'step_wise'
[ 0.055262] cpuidle: using governor ladder
[ 0.055444] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.055568] ASID allocator initialised with 65536 entries
[ 0.055744] Serial: AMBA PL011 UART driver
[ 0.074823] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu
[ 0.078765] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu
[ 0.079055] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx
[ 0.087726] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.087762] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.087776] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.087791] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.499269] cryptd: max_cpu_qlen set to 1000
[ 1.503149] "cryptomgr_test" (91) uses obsolete ecb(arc4) skcipher
[ 1.515291] alg: No test for 842 (842-generic)
[ 1.515439] alg: No test for 842 (842-scomp)
[ 1.606911] DRBG: Continuing without Jitter RNG
[ 1.689519] raid6: neonx8 gen() 2227 MB/s
[ 1.746275] raid6: neonx8 xor() 1605 MB/s
[ 1.803030] raid6: neonx4 gen() 2211 MB/s
[ 1.859787] raid6: neonx4 xor() 1540 MB/s
[ 1.916553] raid6: neonx2 gen() 2040 MB/s
[ 1.973301] raid6: neonx2 xor() 1432 MB/s
[ 2.030076] raid6: neonx1 gen() 1673 MB/s
[ 2.086817] raid6: neonx1 xor() 1178 MB/s
[ 2.143578] raid6: int64x8 gen() 1507 MB/s
[ 2.200334] raid6: int64x8 xor() 801 MB/s
[ 2.257086] raid6: int64x4 gen() 1623 MB/s
[ 2.313833] raid6: int64x4 xor() 823 MB/s
[ 2.370606] raid6: int64x2 gen() 1387 MB/s
[ 2.427380] raid6: int64x2 xor() 736 MB/s
[ 2.484096] raid6: int64x1 gen() 1169 MB/s
[ 2.540832] raid6: int64x1 xor() 583 MB/s
[ 2.540845] raid6: using algorithm neonx8 gen() 2227 MB/s
[ 2.540857] raid6: .... xor() 1605 MB/s, rmw enabled
[ 2.540868] raid6: using neon recovery algorithm
[ 2.541095] fbcon: Taking over console
[ 2.541137] ACPI: Interpreter disabled.
[ 2.543272] iommu: Default domain type: Translated
[ 2.543303] iommu: DMA domain TLB invalidation policy: strict mode
[ 2.543696] vgaarb: loaded
[ 2.544318] SCSI subsystem initialized
[ 2.544546] usbcore: registered new interface driver usbfs
[ 2.544595] usbcore: registered new interface driver hub
[ 2.544639] usbcore: registered new device driver usb
[ 2.545152] mc: Linux media interface: v0.10
[ 2.545187] videodev: Linux video capture interface: v2.00
[ 2.545447] EDAC MC: Ver: 3.0.0
[ 2.546549] Advanced Linux Sound Architecture Driver Initialized.
[ 2.547654] clocksource: Switched to clocksource arch_sys_counter
[ 2.547982] VFS: Disk quotas dquot_6.6.0
[ 2.548071] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.548240] FS-Cache: Loaded
[ 2.548741] pnp: PnP ACPI: disabled
[ 2.555994] NET: Registered PF_INET protocol family
[ 2.556197] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 2.557468] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 2.557522] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 2.557604] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.557777] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 2.558014] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.558283] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 2.558385] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.558440] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.558631] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.558668] NET: Registered PF_XDP protocol family
[ 2.558689] PCI: CLS 0 bytes, default 64
[ 2.558999] Trying to unpack rootfs image as initramfs...
[ 2.571756] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.572294] kvm [1]: IPA Size Limit: 40 bits
[ 2.573169] kvm [1]: vgic interrupt IRQ9
[ 2.573325] kvm [1]: Hyp mode initialized successfully
[ 3.150125] Freeing initrd memory: 8004K
[ 3.371614] Initialise system trusted keyrings
[ 3.371924] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 3.379023] zbud: loaded
[ 3.380684] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.381283] fuse: init (API version 7.34)
[ 3.381842] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 3.422199] NET: Registered PF_ALG protocol family
[ 3.472525] xor: measuring software checksum speed
[ 3.477359] 8regs : 2051 MB/sec
[ 3.480766] 32regs : 2909 MB/sec
[ 3.485366] arm64_neon : 2152 MB/sec
[ 3.485378] xor: using function: 32regs (2909 MB/sec)
[ 3.485395] Key type asymmetric registered
[ 3.485407] Asymmetric key parser 'x509' registered
[ 3.485548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 3.485733] io scheduler mq-deadline registered
[ 3.485747] io scheduler kyber registered
[ 3.485927] io scheduler bfq registered
[ 3.512440] soc soc0: Amlogic Meson GXL (S905X) Revision 21:b (82:2) Detected
[ 3.514894] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 3.517024] Serial: AMBA driver
[ 3.517418] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart
[ 4.541718] printk: console [ttyAML0] enabled
[ 4.556095] brd: module loaded
[ 4.560728] loop: module loaded
[ 4.567930] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.568859] ehci-pci: EHCI PCI platform driver
[ 4.573305] ehci-platform: EHCI generic platform driver
[ 4.579047] usbcore: registered new interface driver cdc_wdm
[ 4.584070] usbcore: registered new interface driver usb-storage
[ 4.590522] mousedev: PS/2 mouse device common for all mice
[ 4.596672] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi
[ 4.602840] meson-vrtc c81000a8.rtc: registered as rtc0
[ 4.607162] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
[ 4.615708] i2c_dev: i2c /dev entries driver
[ 4.621631] Registered IR keymap rc-cec
[ 4.623327] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0
[ 4.631541] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input0
[ 4.643758] sdhci: Secure Digital Host Controller Interface driver
[ 4.646234] sdhci: Copyright(c) Pierre Ossman
[ 4.650520] Synopsys Designware Multimedia Card Interface Driver
[ 4.657607] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.657943] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 4.658209] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 4.664734] meson-sm: secure-monitor enabled
[ 4.678960] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.684467] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 4.695953] hid: raw HID events driver (C) Jiri Kosina
[ 4.697314] usbcore: registered new interface driver usbhid
[ 4.700453] gpio irq setup: hwirq: 0x3A irqfirst: 0x34 irqlast: 0x3A pin[48]
[ 4.702707] usbhid: USB HID core driver
[ 4.703309] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 4.710073] genirq: Setting trigger mode 3 for irq 48 failed (meson_gpio_irq_set_type+0x0/0x140)
[ 4.734084] Initializing XFRM netlink socket
[ 4.735793] NET: Registered PF_INET6 protocol family
[ 4.776936] Segment Routing with IPv6
[ 4.776982] RPL Segment Routing with IPv6
[ 4.779038] In-situ OAM (IOAM) with IPv6
[ 4.783025] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.792403] bpfilter: Loaded bpfilter_umh pid 302
[ 4.793435] NET: Registered PF_PACKET protocol family
[ 4.798463] NET: Registered PF_KEY protocol family
[ 4.803382] 8021q: 802.1Q VLAN Support v1.8
[ 4.807743] registered taskstats version 1
[ 4.811355] Loading compiled-in X.509 certificates
[ 4.818770] zswap: loaded using pool zstd/zbud
[ 4.821075] Key type .fscrypt registered
[ 4.824342] Key type fscrypt-provisioning registered
[ 4.830408] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 4.867899] meson-drm d0100000.vpu: Queued 3 outputs on vpu
[ 4.889693] mmc2: new HS200 MMC card at address 0001
[ 4.890635] mmcblk2: mmc2:0001 AFEACB 14.7 GiB
[ 4.894411] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 4.903853] mmcblk2: p1 p2
[ 4.904010] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 4.907153] mmcblk2boot0: mmc2:0001 AFEACB 4.00 MiB
[ 4.914853] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops 0xffffffc00a2e94a8)
[ 4.920531] mmcblk2boot1: mmc2:0001 AFEACB 4.00 MiB
[ 4.927254] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
[ 4.932613] mmcblk2rpmb: mmc2:0001 AFEACB 512 KiB, chardev (240:0)
[ 4.949162] Console: switching to colour frame buffer device 90x36
[ 4.974351] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 4.983641] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 4.988005] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 4.994288] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 5.001158] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 5.007129] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 5.012314] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 5.019713] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 5.027129] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 5.032308] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 5.039291] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 5.045675] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 5.051547] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 5.057318] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 5.068555] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 5.071214] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 5.602316] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 5.606612] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 5.613836] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 5.622781] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 5.626190] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[ 5.633695] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 5.642876] xhci-hcd xhci-hcd.3.auto: irq 50, io mem 0xc9000000
[ 5.648932] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 5.654358] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
[ 5.661720] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[ 5.668357] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 5.676379] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.683528] usb usb1: Product: xHCI Host Controller
[ 5.688357] usb usb1: Manufacturer: Linux 5.15.83-flippy-80+o xhci-hcd
[ 5.694830] usb usb1: SerialNumber: xhci-hcd.3.auto
[ 5.700239] hub 1-0:1.0: USB hub found
[ 5.703411] hub 1-0:1.0: 2 ports detected
[ 5.707839] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.715492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 5.723556] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.730807] usb usb2: Product: xHCI Host Controller
[ 5.735568] usb usb2: Manufacturer: Linux 5.15.83-flippy-80+o xhci-hcd
[ 5.742036] usb usb2: SerialNumber: xhci-hcd.3.auto
[ 5.747496] hub 2-0:1.0: USB hub found
[ 5.750601] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 5.761320] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[ 5.761782] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[ 5.797705] ALSA device list:
[ 5.800702] No soundcards found.
[ 5.804928] Freeing unused kernel memory: 1984K
[ 5.814382] Run /init as init process
[ 5.818476] with arguments:
[ 5.818484] /init
[ 5.818489] with environment:
[ 5.818493] HOME=/
[ 5.818497] TERM=linux
[ 5.818502] cgroup_enable=memory
[ 5.818507] cgroup_memory=1
[ 5.818511] mac=c4:4e:ac:09:2c:89
[ 5.818940] mmc0: new high speed SDIO card at address 0001
[ 5.954366] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 6.097976] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 6.105525] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.112997] usb 1-1: Product: USB 2.0 Hub
[ 6.180509] hub 1-1:1.0: USB hub found
[ 6.183140] hub 1-1:1.0: 4 ports detected
[ 6.522299] EXT4-fs (mmcblk2p2): mounted filesystem with writeback data mode. Opts: data=writeback. Quota mode: none.
[ 6.795860] systemd[1]: System time before build time, advancing clock.
[ 6.850019] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 6.878421] systemd[1]: Detected architecture arm64.
[ 6.895077] systemd[1]: Set hostname to
A screenshot of the colorful welcome screen,
cat /boot/uEnv.txt cat /etc/ophub-release
screenshot
try: meson-gxl-s905x-tx9.dtb
i think tx9 too much errors... ok i show you wait...
meson-gxl-s905x-p212.dtb
Can this start normally? Is the wired network normal? The box is 100mb?
What to add?
cat /etc/ophub-release
screenshot
yes can start normal... yes 100mb... i delete bluetooth part....
**serial@84c0 {
compatible = "amlogic,meson-gx-uart";
reg = <0x00 0x84c0 0x00 0x18>;
interrupts = <0x00 0x1a 0x01>;
status = "okay";
fifo-size = <0x80>;
clocks = <0x12 0x03 0x1a 0x12>;
clock-names = "xtal\0pclk\0baud";
pinctrl-0 = <0x13 0x14>;
pinctrl-names = "default";
uart-has-rtscts;
phandle = <0x4d>;
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <0x15 0x60 0x00>;
max-speed = <0x1e8480>;
clocks = <0x16>;
clock-names = "lpo";
};
};
serial@84dc {
compatible = "amlogic,meson-gx-uart";
reg = <0x00 0x84dc 0x00 0x18>;
interrupts = <0x00 0x4b 0x01>;
status = "disabled";
clocks = <0x12 0x03 0x30 0x12>;
clock-names = "xtal\0pclk\0baud";
phandle = <0x4e>;
};**
is that correct i have delete?
can you edit nexbox-a95x.dtb add openvfd function? i try copy and paste :
**openvfd {
compatible = "open,vfd";
dev_name = "openvfd";
status = "okay";
};**
it show error as far i remember...
if i use meson-gxl-s905x-p212.dtb - 9 line errors come up with modified - remove bluetooh part but when using meson-gxl-s905x-nexbox-a95x.dtb - only 7 line errors without do anything...
meson-gxl-s905x-x95-pro.dtb.zip
Download, decompress into dtb, upload to /boot/dtb/amlogic
Modify the name of dtb in /boot/uEnv.txt
, restart the test, and see if the cable is normal and the Bluetooth is normal
Bluetooth first install Bluetooth support in armbian-config
my wifi module without bluetooth.. ok i try now
thank you
wifi module is rtl8723bs,no bluetooth?
So what do you add?
dtb ok... i notice you modify bluetooth but still same i count 9 line errors can you teach me remove the error msg? or this just minor msg not effect the system?
before install armbian... in running android7... no bluetooth mac address show... i assume only single chip wifi.. i delete the : **serial@84c0 { compatible = "amlogic,meson-gx-uart"; reg = <0x00 0x84c0 0x00 0x18>; interrupts = <0x00 0x1a 0x01>; status = "okay"; fifo-size = <0x80>; clocks = <0x12 0x03 0x1a 0x12>; clock-names = "xtal\0pclk\0baud"; pinctrl-0 = <0x13 0x14>; pinctrl-names = "default"; uart-has-rtscts; phandle = <0x4d>;
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <0x15 0x60 0x00>;
max-speed = <0x1e8480>;
clocks = <0x16>;
clock-names = "lpo";
};
};
serial@84dc {
compatible = "amlogic,meson-gx-uart";
reg = <0x00 0x84dc 0x00 0x18>;
interrupts = <0x00 0x4b 0x01>;
status = "disabled";
clocks = <0x12 0x03 0x30 0x12>;
clock-names = "xtal\0pclk\0baud";
phandle = <0x4e>;
};**
wonder if i can remove all red errors msg... glad i learn something here... anyway, thank you so much... i appreciated your help...
Hi..
Im new to armbian.... i have x95pro box, after install using t95 config then apt upgrade i got this message : - "ln: failed to create hard link '/boot/initrd.img-5.15.83-flippy-80+o.dpkg-bak' => '/boot/initrd.img-5.15.83-flippy-80+o': Operation not permitted update-initramfs: Generating /boot/initrd.img-5.15.83-flippy-80+o"
is this normal?
dmesg: "[ 9.290657] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 7.731884] systemd[1]: systemd-networkd.socket: Socket service systemd-networkd.service not loaded, refusing. [ 7.742019] systemd[1]: Failed to listen on Network Service Netlink Socket. [ 5.784216] genirq: Setting trigger mode 3 for irq 48 failed (meson_gpio_irq_set_type+0x0/0x140) [ 5.729932] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)"
can you help me fix with new dtb file for x95pro?
thank you