6.0.9 update for VIM3 not working

[gitlao]

Hi. I try to update 6.0.y kenel for VIM3 but it seem not working.

khadas@Khadas:~/6.0.9$ sudo armbian-update 6.0.9 stable no        
[ STEPS ] Ready to update, please wait...
[ STEPS ] Start initializing the environment...
Usage: grep [OPTION]... PATTERNS [FILE]...
Try 'grep --help' for more information.
[ INFO ] Use kernel branch: [ stable ]
[ INFO ] Use mainline u-boot: [ no ]
[ STEPS ] Use local kernel files: 6.0.9

[ STEPS ] Start checking the kernel...
[ INFO ] Kernel name: [ 6.0.9-ophub ]
[ INFO ] K510: [ 1 ]
[ INFO ] Enable sha256sum checking...
[ INFO ] (1/4) [ boot-6.0.9-ophub.tar.gz ] file sha256sum check same.
[ INFO ] (2/4) [ dtb-amlogic-6.0.9-ophub.tar.gz ] file sha256sum check same.
[ INFO ] (3/4) [ header-6.0.9-ophub.tar.gz ] file sha256sum check same.
[ INFO ] (4/4) [ modules-6.0.9-ophub.tar.gz ] file sha256sum check same.

[ STEPS ] Start unpacking the kernel...
[ INFO ] (1/4) Unpacking [ boot-6.0.9-ophub.tar.gz ] done.
[ INFO ] (2/4) Unpacking [ dtb-amlogic-6.0.9-ophub.tar.gz ] done.
[ INFO ] (3/4) Unpacking [ header-6.0.9-ophub.tar.gz ] done.
[ INFO ] (4/4) Unpacking [ modules-6.0.9-ophub.tar.gz ] done.

[ STEPS ] Start updating the uboot...
[ INFO ] The u-boot-gtkingpro.bin file copy is complete.

[ SUCCESS ] Successfully updated, automatic restarting...`

`3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 1 **
** Bad device usb 2 **
** Bad device usb 3 **
reading emmc_autoscript
831 bytes read in 3 ms (270.5 KiB/s)
## Executing script at 01020000
reading u-boot.emmc
757080 bytes read in 26 ms (27.8 MiB/s)
## Starting application at 0x01000000 ...

U-Boot 2021.07-rc3-00183-gd6e1cdad51-dirty (May 31 2021 - 22:35:04 +0800) beelink

Model: Beelink GT-King Pro
SoC:   Amlogic Meson G12B (A311D) Revision 29:b (10:2)
DRAM:  2 GiB
MMC:   sd@ffe03000: 0, sd@ffe05000: 1, mmc@ffe07000: 2
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet@ff3f0000
Hit any key to stop autoboot:  0 
starting USB...
Bus usb@ff500000: Register 3000140 NbrPorts 3
Starting the controller
USB XHCI 1.10
scanning bus usb@ff500000 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
unable to select a mode : -110
Speed: 1000, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17

Retry time exceeded; starting again
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-ae-7e-bd-c9-21-ce
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-meson-beelink-s922x
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-meson
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
Speed: 1000, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
Speed: 1000, full duplex
*** ERROR: `serverip' not set
Config file not found
Speed: 1000, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17

Retry time exceeded; starting again
Speed: 1000, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4

[ophub]

Plug in power again to start

[ophub]

https://github.com/ophub/amlogic-s9xxx-armbian#update-armbian-kernel

First upgrade the update script: armbian-sync

armbian-update: The method and parameters of the kernel update have also changed, check the latest instructions