Corndog Not Modeled in FreeCAD

jazzychad commented 2 years ago

Please fill out the following:

Build Number where this issue is present. (This is the same as the most recent tag number): 2.1.0
Is this recording an active issue, or suggesting an improvement?: active
Are you just logging an issue, or do you have a solution in mind?: solution
Please describe the issue:

See page for reference: https://docs.opulo.io/tag/v2.1.0/docs/mechanical-assembly/printing-parts/

Instructions say only to download 3d-prints.zip from the assets of latest tag (in this case, 2.1.0). The next step says to "Before printing the parts, print the calibration print. This is FDM-8000, ..."

This file is not included in the 3d-print.zip archive, and it took me a while to realize it was actually a separate file in the assets list.

Please describe your suggestion solution, if you have something in mind:

Either include this file in the 3d-prints.zip archive, or deliberately specify in the documentation to download the FDM-8000.stl file separately, or both.

atanisoft commented 2 years ago

@jazzychad I agree it would be great to have this in the zip file rather than only on the release itself. It would require the FreeCAD file to be checked in and referenced as part of the actions.

sphawes commented 2 years ago

yup, this is really about getting the corndog modeled in FreeCAD. @SyberxSpace this would be a great foray into FreeCAD!

lucian151 commented 2 years ago

@bricefekete is working on this! Assigning him to this as well.

lucian151 commented 5 months ago

We will no longer be doing this as the LumenPnP comes pre-printed by Opulo.

opulo-inc / lumenpnp

Corndog Not Modeled in FreeCAD #515