Closed glennl closed 3 years ago
The net between PWRAMP (AX5043 Pin 20) and JP2 - Pin 11 should be removed. It is not something likely ever to be used, and may cause problems if the shunt were installed and the pin programmed as an output. The default on power-up is input however.
The net between PWRAMP (AX5043 Pin 20) and JP2 - Pin 11 should be removed. It is not something likely ever to be used, and may cause problems if the shunt were installed and the pin programmed as an output. The default on power-up is input however.