search

orobardet / klipper_nano_expander

Klipper Nano Expander, an Arduino Nano Shield to be used as an auxiliary Klipper MCU
MIT License
26 stars 6 forks source link

Only 5V fan? #3

Closed za-x-az closed 5 months ago

za-x-az commented 1 year ago

Is it correct that this is only for 5V fans?

I was looking for just a board like this, but for 12/24v fans.

orobardet commented 1 year ago

Hi, Yes, it's 5V only, there is no regulator on the board. It was design for this purpose: having auxiliary Kilipper MCUs capable of driving 5V devices.

For 12/24V, you may want to use the Klipper Expander.

za-x-az commented 1 year ago

Sadly I'm looking for something more or less like your board, but for 12/24V :) Thx for the fast answer i will keep looking

On Tue, 12 Sept 2023 at 08:32, Olivier Robardet @.***> wrote:

Hi, Yes, it's 5V only, there is no regulator on the board. It was design for this purpose: having auxiliary Kilipper MCUs capable of driving 5V devices.

For 12/24V, you may want to use the Klipper Expander https://github.com/VoronDesign/Voron-Hardware/tree/master/Klipper_Expander .

— Reply to this email directly, view it on GitHub https://github.com/orobardet/klipper_nano_expander/issues/3#issuecomment-1715073518, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK42FVWIYPQ3S6HT6PVDSZLXZ76XZANCNFSM6AAAAAA4TXI7IE . You are receiving this because you authored the thread.Message ID: @.***>

-- M.v.h. / Best Regards

Andreas L. Rasmussen