Cannot boot windows 10 via OC

KrisCris commented 4 years ago

Describe the bug I cannot figure out why but after I received a exchanged NUC8i7HVK from Intel, the OC just doesn't boot windows anymore, even the windows installer.

When I boot USB Windows 10 Installer using OC, it ends up posting an error, or simply restart. IMG_20200419_231432

If I use F10 to pick bootable device and install, after I set bootloader to OC by executing bcdedit /set '{bootmgr}' path \EFI\OC\OpenCore.efi, the OC still failed to boot windows, it's less than 3 sec did the windows 10 stuck and restart.

However, the Windows 10 installed in last NUC worked fine in this machine until I upgraded BIOS to 0059, after which it refused to boot and ran into blue screen immediately after being picked, reporting ACPI_BIOS_ERROR, and no luck after downgrading.

Expected behavior I think it should be able to boot windows 10 without much pain, as my last NUC did. On my last NUC, I simply let OC to boot Windows installer and install and it worked fine.

Configuration

HaC Mini version : https://github.com/osy86/HaC-Mini/actions/runs/42725807
OSX version : 10.15.3
NUC model : NUC8i7HVK
Boot SSD model and protocol : NVME 1TB, MacOS
Second SSD model and protocol : SATA 512GB, Windows
First DIMM model : Kingston 2666 16GB
Display port(s) used : MiniDP, USB-C
Display resolution(s) : 2K, 4K
Any TB3 devices: HP TB3 DOCK
Any USB devices: DIY Keyboard, Logitech G903

Modifications No

Panic log Above

osy commented 4 years ago

I don’t think this is related to OC. Does the USB work on another machine? According to microsoft the error code means corrupted files.

KrisCris commented 4 years ago

F10->USB UEFI, it works. But in OC, NO.

osy commented 4 years ago

This feels like an OC issue to me. Can you manually update OC for the USB and see if that helps? You might have to manually update the config.plist as well.

KrisCris commented 4 years ago

This feels like an OC issue to me. Can you manually update OC for the USB and see if that helps? You might have to manually update the config.plist as well.

I think I kinda fixed the problem by erase all my disks and reinstalled the system, which is tough but worked. But to install windows 10 still I have to boot the installer via F10 otherwise it ended up showing the same error message.

BTW, when booting windows via OC, NUC is recognized as a MAC MINI so that some drivers for NUC is not available at this point, like the IGPU.

osy / HaC-Mini

Cannot boot windows 10 via OC #239