This has been updated as of December 8th 2023 to streamline the process. You no longer need to SSH into the Pi but you will still need to turn on SSH.
Updating drivers as new ones come out is now allot easier!
Lakka on the Pi Zero W is 100%
Lakka on the Pi Zero 2 W is 95%
Lakka on the Pi 4 and CM4 is 60% - No on screen display
steps to get them up and running are below:
Zero - Flash the PI / Pi Zero (32-bit) image from Raspberry Pi Imager
Zero 2 - Flash the PI 2 / PI 3 (32-bit) image from Raspberry Pi Imager NOT THE PI ZERO 2 IMAGE
Pi4\CM4 - Flash the Pi 4 / Pi 400 (64-bit) image from Raspberry Pi Imager
Download the Zip at the bottom of this post with the pre-configed files
copy the following to the root of the sd card:
config.txt
distroconfig.txt
PSPi02.txt
overlays - Folder
drivers - Folder
eject and boot.
once booted use a Keyboard to turn on SSH and connect to WiFi
On your computer connect to the PSPi via ftp and also ssh
Username and password are root and port is 22
Move the following folders to /storage
.config -Folder
drivers -Folder
If you get any warnings hit replace
Now from SSH type the following and hit enter
cd driverschmod +x main osd gamepad
Now just reboot. Everything should be working just use the keyboard to get in to the controller binding.
If new drivers come out updating them is very easy.
Remove the SD card and plug it into your computer. Go into the drivers folder and replace main, osd, and gamepad with the newest versions. Put the SD Card back into your PSPi and boot it up. Your all done!
Lakka for the Zero, Zero 2, Pi4, CM4
This has been updated as of December 8th 2023 to streamline the process. You no longer need to SSH into the Pi but you will still need to turn on SSH.
Updating drivers as new ones come out is now allot easier!
Lakka on the Pi Zero W is 100% Lakka on the Pi Zero 2 W is 95% Lakka on the Pi 4 and CM4 is 60% - No on screen display steps to get them up and running are below:
Zero - Flash the PI / Pi Zero (32-bit) image from Raspberry Pi Imager Zero 2 - Flash the PI 2 / PI 3 (32-bit) image from Raspberry Pi Imager NOT THE PI ZERO 2 IMAGE Pi4\CM4 - Flash the Pi 4 / Pi 400 (64-bit) image from Raspberry Pi Imager
Download the Zip at the bottom of this post with the pre-configed files copy the following to the root of the sd card: config.txt distroconfig.txt PSPi02.txt overlays - Folder drivers - Folder eject and boot.
once booted use a Keyboard to turn on SSH and connect to WiFi On your computer connect to the PSPi via ftp
and also sshUsername and password are root and port is 22
Move the following folder
sto /storage .config -Folderdrivers -FolderIf you get any warnings hit replaceNow from SSH type the following and hit entercd driverschmod +x main osd gamepadNow just reboot. Everything should be working just use the keyboard to get in to the controller binding.
If new drivers come out updating them is very easy.
Remove the SD card and plug it into your computer. Go into the drivers folder and replace main, osd, and gamepad with the newest versions. Put the SD Card back into your PSPi and boot it up. Your all done!
Lakka zero 1or2.zip Updated 2023-12-08