search

oznu / homebridge-gsh

Allow Google Assistant to control your Homebridge accessories.
https://assistant.google.com/services/a/uid/000000b558f0d5d1?hl=en
GNU General Public License v3.0
399 stars 54 forks source link

Google Home App, doesn't show any devices, if not connected to local Network #21

Closed gsiscotty closed 4 years ago

gsiscotty commented 4 years ago

While not connected to my local Network, i don't see any devices in my google home app. Is there a way, to use GSH without a local Network connection?

oznu commented 4 years ago

All actions performed in the Google Home app go via Google's servers regardless of whether or not you're on your local network.

gsiscotty commented 4 years ago

Thank you for the response. The Logs, don't show anything problematic.

Any idea, where i should start looking for possible issues? (or just, reinstall the plugin?)

thx for advice

oznu commented 4 years ago

Do your other Google Home devices show up when using an external network? Does it happen on all external networks?

gsiscotty commented 4 years ago

The most of my Google Home devices, are integrated via homebridge (gsh plugin). There are only 2 other devices, (irobot roomba and chromecast), wich are directly integrated.

They work wherever i am (and connected to).

Only the ones, discovered by the gsh pluging don't show up.. No i'm connected to the home network and they don't show up neither. So currently, i don't see any devices from gsh at all.

oznu commented 4 years ago

Email me your username / email that you've used to connect with - address in my profile.

Then drop off WiFi and attempt to sync devices (pull down in the Google Home app). Once you've done this a few times reply back here and I'll check the logs.

gsiscotty commented 4 years ago

thx, tried a view times to update my home app. hope you find something

oznu commented 4 years ago

I'm not seeing anything come through from Google's side for your account, I can see your homebridge instance is connected though.

Can you try removing the action from the Google Home app and re-adding it?

From the Google Home app:

  1. Add
  2. Set up a device
  3. Have something already setup?
  4. Click the "Homebridge" action at the top of the page, and selected "Unlink"
gsiscotty commented 4 years ago

Ok, now i think i see why it happened.

The Google Home App, lost its connection to the Homebridge (just the "Device") i reconnected the Homebridge, not its back again.

Going to test everything.

Will send you an update.

Am Mi., 4. Dez. 2019 um 00:11 Uhr schrieb oznu notifications@github.com:

I'm not seeing anything come through from Google's side for your account, I can see your homebridge instance is connected though.

Can you try removing the action from the Google Home app and re-adding it?

From the Google Home app:

  1. Add
  2. Set up a device
  3. Have something already setup?
  4. Click the "Homebridge" action at the top of the page, and selected "Unlink"

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/oznu/homebridge-gsh/issues/21?email_source=notifications&email_token=ANSW5GH3ZUYBVFHQ3T7TJMLQW3RT3A5CNFSM4JTU5UF2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEF3ENRI#issuecomment-561399493, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANSW5GE4TCDA7CBFTJKAH2DQW3RT3ANCNFSM4JTU5UFQ .

gsiscotty commented 4 years ago

After completely removing the Link, and reconnecting the link, i'm seeing my devices again.

Thank you for the Support!