Closed Rabbit-404 closed 1 year ago
Hi! Thank you for testing it! :-) Too bad it doesn't work out for you, though. :'( What kind of printer do you have? The z-axis moves the bed or the nozzle? There are printers where the lack of power causes the bed to go down by gravity, and that could only be solved by using a endstop for the zmin, although I have never tried it.
its a I3 clone, the z axiz moves the nozzle
Do you have the Z_HOMING_HEIGHT activated in the marlin? If so, you must also configure it in the options of this plugin.
El 26 feb. 2018 10:19 AM, "Rabbit-404" notifications@github.com escribió:
its a I3 clone, the z axiz moves the nozzle
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/pablogventura/OctoPrint-PowerFailure/issues/1#issuecomment-368501515, or mute the thread https://github.com/notifications/unsubscribe-auth/AF8e-gZzXSXt_bhP3eg5fL15HSE33b7wks5tYq9pgaJpZM4SSBwv .
That was it, now it starts at the correct height, but now it prints to the left side of X and to the front on Y =(
Can you send a video?
El 28 feb. 2018 12:28 PM, "Rabbit-404" notifications@github.com escribió:
That was it, now it starts at the correct height, but to the left side of the print =(
— You are receiving this because you commented.
Reply to this email directly, view it on GitHub https://github.com/pablogventura/OctoPrint-PowerFailure/issues/1#issuecomment-369274271, or mute the thread https://github.com/notifications/unsubscribe-auth/AF8e-i669puaqSfJfChAxmlZyHiBmWWfks5tZW_xgaJpZM4SSBwv .
I uploaded it to Google Drive, here is the link https://drive.google.com/file/d/1LCUSfR-Wd5HlEDT4gh33ZHQ4xqgjNJ0D/view?usp=sharing
Im guessing there is no workaround for this yet =(
I'm sorry! I've been very busy and now I'm moving to another apartment. For now I won't be able to continue with this development, but when I have more free time I will continue with this. Any pull request is welcome! Greetings!
El mar., 10 de abr. de 2018 10:58, Rabbit-404 notifications@github.com escribió:
Im guessing there is no workaround for this yet =(
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/pablogventura/OctoPrint-PowerFailure/issues/1#issuecomment-380108058, or mute the thread https://github.com/notifications/unsubscribe-auth/AF8e-i_gB4QIoktuQaQqc0cC59HyTmapks5tnLptgaJpZM4SSBwv .
I just saw the video. It seems to me that the start code of your gcode (sliced to be used in your machine) must be different from the configured in the plugin. Surely if you check your gcode startup code and the one in the plugin configuration you can fix this.
El mar., 10 de abr. de 2018 11:54, Pablo Ventura pablogventura@gmail.com escribió:
I'm sorry! I've been very busy and now I'm moving to another apartment. For now I won't be able to continue with this development, but when I have more free time I will continue with this. Any pull request is welcome! Greetings!
El mar., 10 de abr. de 2018 10:58, Rabbit-404 notifications@github.com escribió:
Im guessing there is no workaround for this yet =(
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/pablogventura/OctoPrint-PowerFailure/issues/1#issuecomment-380108058, or mute the thread https://github.com/notifications/unsubscribe-auth/AF8e-i_gB4QIoktuQaQqc0cC59HyTmapks5tnLptgaJpZM4SSBwv .
Hi, im having a problem, i was testing the plugin, and everytime I cut the power off it restarts printing mid air, how can i solve this?