Cannot set VID VLAN3 & 4 to under 4 values

[GoogleCodeExporter]

What steps will reproduce the problem?
1.On Wan Menu Try to set VLAN LAN3 to 4 and LAN 4 to 3 for Movistar TV on Spain

What is the expected output? What do you see instead?
Please enter a value between 4 and 4094

What version of the product are you using? On what operating system?
3.0.3.9-091

Original issue reported on code.google.com by josemrab...@gmail.com on 5 May 2015 at 6:13

[GoogleCodeExporter]

This has been discussed before. As sources have not been modified, the only 
option we've found for this to work is changing some variable in th source and 
recompile. Look for "movistar" in "Open Issues" and you'll find it.

By the way, now I have Movistar TV working (with Movistar device) and I can 
watch Movistar TV from any machine at home :) It's complicated, but with bird, 
igmproxy and xupnp it can be done.

Original comment by aluisper...@gmail.com on 6 May 2015 at 7:13

[GoogleCodeExporter]

Thank you for your prompt replay, I have no idea to compile the file. Would you 
share the file with the file changed please? Would be great if developers can 
do this change for a new version. Thanks in advance. 

Original comment by josemrab...@gmail.com on 6 May 2015 at 9:24

[GoogleCodeExporter]

I'll try to put it in some cloud service and post it here. Anyway it would be 
much better if the developers changed this, I can't see any reason for this to 
be implemented that way.

Original comment by aluisper...@gmail.com on 7 May 2015 at 1:46

[GoogleCodeExporter]

Thanks you are welcome!!

Original comment by josemrab...@gmail.com on 7 May 2015 at 3:51

[GoogleCodeExporter]

Here you have:

https://mega.co.nz/#!G48wCLJJ!mqVEyfkUXkSy1hDhSBIFKI4OOCGAsIefwQfE474JB3E

Follow instructions in issue 1298 to make Imagenio work

Original comment by aluisper...@gmail.com on 9 May 2015 at 6:34

[GoogleCodeExporter]

Here you have:

https://mega.co.nz/#!G48wCLJJ!mqVEyfkUXkSy1hDhSBIFKI4OOCGAsIefwQfE474JB3E

Follow instructions in issue 1298 to make Imagenio work

Original comment by aluisper...@gmail.com on 9 May 2015 at 9:20

[GoogleCodeExporter]

I don't know why but I've tried twice to put here the link to the uploaded 
firmware and it gets deleted.

Are those links not allowed?

Original comment by aluisper...@gmail.com on 9 May 2015 at 9:31

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Thanks a lot, I Will test it in a few moment!!!

2015-05-09 8:34 GMT+02:00 <rt-n56u@googlecode.com>:

Original comment by josemrab...@gmail.com on 10 May 2015 at 6:25

[GoogleCodeExporter]

https: // mega. co. nz / #!G48wCLJJ!mqVEyfkUXkSy1hDhSBIFKI4OOCGAsIefwQfE474JB3E

Original comment by aluisper...@gmail.com on 10 May 2015 at 7:54

[GoogleCodeExporter]

thanks but it didn't work for me. the router seems to have internet connection 
but not transmitted through lan or wifi. (i need the vlan 2 for internet 
connection)
i hope that developers can fix this.

Original comment by alejo...@gmail.com on 11 May 2015 at 12:57

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Dear aluisper,
First of all I want to say thanks a lot for your effort, I forgot to say that 
my router is the n65u and I would like to apologize for your inconvenince. The 
router that is not working with the original software in Spain is the n65un the 
n56u works correctly with the original ASUS firmware. I don't know if you can 
build a new FULL version for the n65u needed,it would help me and the whole 
Spanish community with a Movistar ONT. Thanks in advance for your effort and 
understanding.

Original comment by josemrab...@gmail.com on 11 May 2015 at 6:58

[GoogleCodeExporter]

Sorry, Josemrab, but I don't own a n65u, and I would be very scared of sending 
a firmware I can't test. It's really easy building the firmware as stated in:

https: // code. google. com /p/rt-n56u/wiki/HowToMakeFirmware

Original comment by aluisper...@gmail.com on 11 May 2015 at 12:48

[GoogleCodeExporter]

Well we have the rescue tool!! If there is any problem we can change firmware 
in 3 minutes!! I will try buy it seems very dificult for people like me... 
Thank a lot anyway.

Original comment by josemrab...@gmail.com on 11 May 2015 at 12:56

[GoogleCodeExporter]

Josemrab, I'll try to help you from here, but I'm really busy now and my home 
PC is waiting for a change (I hope it will be ready in a couple of weeks). But 
following the instructions in the Wiki it's really easy to build the firmware, 
just try.

Anyway, I don't know why this change is not deployed in the main sources. I 
can't see any reason for this VLAN ID limitation anywhere, but it seems nobody 
really reads this "Issues" section. No developer has answered here nor in the 
other open issue about this same problem...

Original comment by aluisper...@gmail.com on 13 May 2015 at 6:03

[GoogleCodeExporter]

Dear aluisper, I agree with all you write, I cannot see any reason to limit the 
value either. I hope the new version comes with this change, It will help all 
the spanish users. I want to thank you again for your effort and I promess that 
I will try to modify the full n65u firmware file... Anyway the full version 
modified will be welcome to everyone. Thanks again!!

Original comment by josemrab...@gmail.com on 13 May 2015 at 7:26

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

If anyone wants to try, I'm quite sure that this is only a limitation of the 
GUI interface. I mean that if you wan to try using the command line (with 
telnet or ssh) this would work with the standard firmware you can find in this 
Web.

You need some linux expertise, but it's all about "ifconfig" and using scripts 
(in "customization" section). I'm doing it with my firmware because I wanted to 
watch Imagenio anywhere at home without the decoder, and I think it should work 
without modifying source.

And if you want me to tell you how to do this, I'm afraid it's difficult to 
tell :). I'm using igmpproxy, xupnp and perhaps somehting more. If I had to do 
it again I think it would take me many hours...

But just adding another VLAN is quite easy. When I'm home I could write the 
commands if you want.

Original comment by aluisper...@gmail.com on 13 May 2015 at 10:13

[GoogleCodeExporter]

Ok, yes please, imagine if it's complicated to you for me will be close to 
impossible... Thank you very much again!!

Original comment by josemrab...@gmail.com on 13 May 2015 at 11:54

[GoogleCodeExporter]

Sorry, I thougth the configuration was similar for only the Imagenio device and 
the one I have, but it is not.

My config is working so that every machine in the network can watch Imagenio 
with a UPNP client (like VLC in Windows), but it's not easy to explain. I'm 
going to try to write a document with everything and put it somewhere.

For me it's much more interesting, because with a Smart TV or any device you 
can wtch any channel anywhere. I can be watching a Movistar channel on my iPad, 
another one in the kitchen TV and a third in Imagenio device.

Just give me some time and I'll be back...

Original comment by aluisper...@gmail.com on 13 May 2015 at 6:00

[GoogleCodeExporter]

Thank you for your time again, we will wait for it!!!

Original comment by josemrab...@gmail.com on 14 May 2015 at 8:03

[GoogleCodeExporter]

Here you have the document:

https:// www. dropbox. com/ s/ 
t0e811m2zhuve9n/Imagenio%20en%20RT-N56U%20y%20por%20UPNP.docx?dl=0

I've open a thread in ADSLzone so that I can help when I have some time (and in 
Spanish :)). Please report any problem there.

I hope it works for you, but beware, it's not easy at all...

Original comment by aluisper...@gmail.com on 17 May 2015 at 4:20

[GoogleCodeExporter]

Great tutorial on Spanish, Thanks a lot. 

Original comment by josemrab...@gmail.com on 18 May 2015 at 12:37

[GoogleCodeExporter]

VLAN ID #3 is reserved for iNIC_mii guest AP on RT-N65U and cannot be used for 
handle tagged WAN traffic.

VLAN ID #2 support for tagged WAN traffic already added in last commits.

Original comment by andy.pad...@gmail.com on 22 May 2015 at 10:57

[GoogleCodeExporter]

Latest source works fine for me without any change. It works even with the 
configuration to watch Movistar TV on any device, but the interface must be 
defined through the GUI.

Thanks Andy for the change

Original comment by aluisper...@gmail.com on 25 May 2015 at 8:34

[GoogleCodeExporter]

Dear Andy,

As a Project member I would like you please to tell us if it's possible to let 
the Channel 3 and 2 with any trouble. Here in Spain is impossible to connect 
our ONT's without those channels. Thanks in advance.

Original comment by josemrab...@gmail.com on 25 May 2015 at 9:09

[GoogleCodeExporter]

VLAN ID #3 is reserved only on RT-N65U device. Any other devices can usage VLAN 
ID #2..4094 for tagged WAN traffic.

Original comment by andy.pad...@gmail.com on 26 May 2015 at 2:31

[GoogleCodeExporter]

Dear Andy

Thank you for your prompt reply. Can you suggest any solution?

Original comment by josemrab...@gmail.com on 26 May 2015 at 3:23

[GoogleCodeExporter]

@josemrab, ¿para qué necesitas la vlan 3? En mi configuración solamente 
tengo la 6 (internet) y la 2 (Imagenio). ¿Es para el teléfono?

Original comment by aluisper...@gmail.com on 27 May 2015 at 7:07

[GoogleCodeExporter]

Solo necesito la dos pero el software no permite bajar de 4

Original comment by josemrab...@gmail.com on 28 May 2015 at 4:20

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

En las últimas versiones ya lo permite. No sé si hoy tendré tiempo, pero si 
puedo intento compilar para el N65U y a ver cómo te lo mando. Tengo PC nuevo y 
ahora tarda muy poquito :). Entiendo que lo que te dice Andy es eso, que ya 
puedes usar la 2, aunque no la 3.

Original comment by aluisper...@gmail.com on 28 May 2015 at 8:30

[GoogleCodeExporter]

Muchas gracias! Entiendo que igual no nos vale.... He intentado seguir la 
instrucciones y por lo visto hay que instalar el Ubuntu en una partición y 
despues utilizar otro soft para compilar. Para uno que no lo ha hecho nunca la 
verdad es que no es facil. Te agradezco la modificación de verda!! Un abrazo y 
gracias por anticipado.

Original comment by josemrab...@gmail.com on 28 May 2015 at 8:44

[GoogleCodeExporter]

Tranquilo, en mi caso es fácil. Ayer compilé la última versión para el mío 
así que en un rato tiene que estar. Eso sí, cuando llegue a casa esta tarde. 
Debería servirte porque según este hombre sí te deja seleccionar la VLAN 2. 
A mí me deja, pero es un N56U. Cuando la compile os la dejo en algún lado. 
Pero ten a mano el procedimiento de recuperación por si acaso, que ya sabes 
que yo no puedo probarlo.

Original comment by aluisper...@gmail.com on 28 May 2015 at 9:16

[GoogleCodeExporter]

No sabes lo que te lo agradezco, muchas gracias otra vez, lo pruebo y dejo un 
feedback en el foro.

Original comment by josemrab...@gmail.com on 28 May 2015 at 10:01

[GoogleCodeExporter]

Aquí lo tienes:
https:// www.dropbox.com /s /qmhelyfra9re7ph /RT-N65U_3.0.3.9-094.trx?dl=0

(quítale los espacios). Prueba pero con cuidado :)

Mira a ver si te falta algo. Yo tengo pocas cosas porque el N56U tiene menos 
memoria para el firmware, pero creo que está lo imprescindible.

Otra cosa a tener en cuenta. Para el N65U solamente está soportado el kernel 
3.0.x, mientras que pare el resto el kernel es el 3.4.x. No sé si eso afecta 
al funcionamiento de algo, pero me temo que es lo que hay :(

Suerte!!! Y cuenta lo que sea.

Original comment by aluisper...@gmail.com on 28 May 2015 at 7:42

[GoogleCodeExporter]

Muchas gracias! Lo pruebo luego, es la versión FULL? Luego te dejos dicho si 
funciona...

Original comment by josemrab...@gmail.com on 29 May 2015 at 6:14

[GoogleCodeExporter]

Prueba a ver si te funciona y si es así miramos a ver qué módulos quieres. 
Lo único que tiene es la VPN, el transmission, xupnp y el servidor de DLNA. En 
mi cacharro no cabe nada más :)

Original comment by aluisper...@gmail.com on 29 May 2015 at 6:17

[GoogleCodeExporter]

Ok, Thanks

Original comment by josemrab...@gmail.com on 29 May 2015 at 11:21