pahud / autoddvpn

Automatically exported from code.google.com/p/autoddvpn
0 stars 0 forks source link

不能自动修改route-up.sh #114

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
請描述一下您進行怎樣的操作之後碰到了問題
一直停在ALL DONE. Let's wait for VPN being connected
但其实VPN已经拨通了,看到/tmp/openvpncl/route-up.sh其实并未被修
改,所以就所有流量都走VPN了,没有把路由加上

你期待是怎樣的結果,然而卻出現了什麼情形?
期待正常结果

請提供以下資訊:

1. 您的路由器型號:H618B
2. DD-WRT版本: DD-WRT v24-sp2 (12/20/11) mega
3. 您的作業系統:UBUNTU
4. 您的瀏覽器版本:CHROME
5. autoddvpn的連線模式(pptp+wget, pptp+jffs, openvpn+jffs等):openvpn 
+jffs
6. autoddvpn的運行模式,傳統模式(classicMode)還是優雅模式(g
raceMode):
7. DD-WRT WAN口連線模式是 pptp or dhcp or static :dhcp
8. 運行autoddvpn之後DD-WRT 的命令輸出 # route -n  | tail -n 20 :
(以上1-8點必填,否則可能沒辦法即時協助你解決問題)
root@DD-WRT:/tmp# route -n |tail -n 20
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.230.5   0.0.0.0         255.255.255.255 UH    0      0        0 tun1
106.XXX.XX.XX   192.168.1.254   255.255.255.255 UGH   0      0        0 vlan1
192.168.1.254   0.0.0.0         255.255.255.255 UH    0      0        0 vlan1
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 vlan1
192.168.230.0   192.168.230.5   255.255.255.0   UG    0      0        0 tun1
192.168.11.0    0.0.0.0         255.255.255.0   U     0      0        0 br0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 br0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         192.168.230.5   0.0.0.0         UG    0      0        0 tun1

如果方便的話,請參考這裡的說明,貼上autoddvpn.log內容
(說明:http://code.google.com/p/autoddvpn/wiki/DEBUG)
[INFO#445] 01/Jan/1970:00:00:19 log starts
[INFO#445] 01/Jan/1970:00:00:19 openvpn+jffs mode
[INFO#445] 01/Jan/1970:00:00:19 temporarily set date to 20100729 to fix openvpn 
SSL/TLS issue. see http://goo.gl/bb6a
[INFO#445] 29/Jul/2011:12:00:00 modifying /tmp/openvpncl/route-up.sh
[INFO#445] 29/Jul/2011:12:00:00 /tmp/openvpncl/route-up.sh modified
[INFO#445] 29/Jul/2011:12:00:00 modifying /tmp/openvpncl/route-down.sh
[INFO#445] 29/Jul/2011:12:00:00 /tmp/openvpncl/route-down.sh modified
[INFO#445] 29/Jul/2011:12:00:00 ALL DONE. Let's wait for VPN being connected.

最後如果可能的話,請附上截屏或任何可能有幫助的夾檔

Original issue reported on code.google.com by masiqi on 17 Jan 2012 at 10:52

GoogleCodeExporter commented 9 years ago
我发现貌似实际上是修改了,但是不知道被什么进程又给改��
�去了。

Original comment by masiqi on 17 Jan 2012 at 10:59