Cannot see any entities in Home Assistent after importing the Integration via HACS

pail23 / stiebel_eltron_isg_component

Stiebel Eltron ISG integration for Home Assistant

MIT License

43 stars 20 forks source link

Cannot see any entities in Home Assistent after importing the Integration via HACS #227

Closed tux1980 closed 2 months ago

tux1980 commented 2 months ago

Hi,

the Integration does not work the way it is supposed to be. The Integration is now availible so far but I cannot observe any entities for my Heatung pump THZ 403 SOL from Stiebel Eltron. The ISG works fine.

any hints or ideas? I just followd your guidance with the automatic Integration via HACS.

Thanks Wolfgang

My ISG:

Padanian commented 2 months ago

Possibly the ip address is incorrect? Difficult to say...

andreabafile commented 2 months ago

I see the UPnP logo, that means you may have unintentionally used the UPnP integration and not the Stiebel Eltron integration. You need to see the Stiebel Eltron logo as integrated device.

tux1980 commented 2 months ago

I', going to check that out. Thanks. After installing the Stiebel Eltron Integration from the HACS, where can I configure the IP Address, username and password of my ISG?

tux1980 commented 2 months ago

Yes that was the problem:) Thanks a lot, it's working now.