search

pail23 / stiebel_eltron_isg_component

Stiebel Eltron ISG integration for Home Assistant
MIT License
43 stars 19 forks source link

Adding set flow temperature for fan cooling (modbus reg 1516/7) #81

Closed gargar69 closed 4 months ago

gargar69 commented 1 year ago

I would like to change the cooling flow temperature ( COOLING_FLOW_TEMPERATURE_TARGET_CC1) which is modbus register 1517 (1516 for write I think). I have read the preceding 5 bytes and following 2 bytes, loading each byte as a number and displaying the values as a,b,c,etc. The value for register 1515 and 1518 are shown as unavailable. This agrees with the fact that on the modbus sheet they are unavailable for WPM systems. However when I change the value in the WPM console, it does not change (even on a restart of HASS) on the entity. Also when I change the entity in HASS it appears to change, but does not update the WPM. I have configured the entity the same as the "comfort temperature for heating circuit 1’"as far as I know, so the step size and data type are the same. I have also posted this on the HASS community. Any ideas would be gratefully received. Thanks GAR

pail23 commented 11 months ago

The Cooling Room Temperature Target has been added in 2023.8

gargar69 commented 11 months ago

Thanks Paul, but it is the 'cooling FLOW temperature target' that I am missing.

pail23 commented 11 months ago

Added the entity in 2023.8.1. Please delete the Stiebel Eltron Configuration and re-add it since I had to change one entity name and id.

gargar69 commented 11 months ago

Hi Paul. Thanks for the update. I have instaled 2023.8.1 and although the entity is shown it still chows unavailable. Using the Stiebel WPM the setting is available and is amendable. Hmm? Thanks GAR

pail23 commented 9 months ago

I have extended the diagnosis information in the release 2023.10. Could you please download the diagnosis information and post them here?