search

paiprashanth / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega
0 stars 0 forks source link

CH6 tuning shows only Min or Max, nothing in between. #691

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
MP v1.1.99, ACv2.6 

Quote from wiki (http://code.google.com/p/arducopter/wiki/AC2_Tweaks): "...To 
test that the values are changing: move the lever or knob then click 'Refresh 
Params', the value should be displayed in the center pane in the respective 
box, move it again and click 'Refresh Params' again, the value should've 
changed. Alternatively select the Terminal tab, type 'test' and then 'tune' and 
your value will scroll down in the window, adjust the knob or lever to see the 
values change."

If I enter 4.000 and 5.500 as min/max then click Write Params then type 'test' 
and 'tune' the values show ONLY 4.000 min or 5.500 max, there are NO increments 
in between when moving the CH6 lever. (My pulse width for that channel is 
1024-2099ms)

Original issue reported on code.google.com by graham.d...@gmail.com on 22 Jul 2012 at 2:27

GoogleCodeExporter commented 8 years ago 
MP v1.2, APv2.5

Same issue still exists in Arduplane 2.5

Original comment by Gregm...@gmail.com on 27 Jul 2012 at 3:36

GoogleCodeExporter commented 8 years ago 
arduplane doesnt have a tune mode.

Original comment by Meee...@gmail.com on 29 Jul 2012 at 12:23

GoogleCodeExporter commented 8 years ago 
Sorry this should've been logged in the ArduCopter section as it applies to 
ArduCopter and not ArduPlane

Original comment by graham.d...@gmail.com on 29 Jul 2012 at 6:34

GoogleCodeExporter commented 8 years ago 
Issue re-created in ArduCopter

Original comment by graham.d...@gmail.com on 29 Jul 2012 at 5:37

GoogleCodeExporter commented 8 years ago 
My mission planner 1.2.8 to 1.2.12 went well!
I got the problem starting with 1.2.13/14, still working on the cause.

Original comment by derlange...@web.de on 5 Oct 2012 at 5:14