Closed MatzElectronics closed 8 years ago
Oh dear god, seriously?
I find an erratic flight flight controller that crashes annoying, so I put the beeps in to prevent that - if you move the controller while I'm finding the gyro zero you get what was captured on video when Kyle / Ken tried the throw launch, powering the quad while held. That was when I put in the movement detect beeps.
All the startup happens before I can tell it's connected to the PC, so I can't do USB specific startup behavior without a lot of rework, and probably adding a second to the boot time.
J
On Monday, October 10, 2016, Matthew Matz notifications@github.com wrote:
Is the startup beeping when the gyro isn't settled annoying? Should it be disabled under any or some circumstances (usb only)... can the volume be reduced?
BTW - this is a low-priority issue, more for documenting the idea than taking immediate action.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/parallaxinc/Flight-Controller/issues/49, or mute the thread https://github.com/notifications/unsubscribe-auth/ANak_sv0ff-z4P0klZtHXIywnD1kXtzAks5qymmegaJpZM4KSwjk .
Ok - I vote safety is paramount to being not annoyed :)
False Alarm. Issue Closed! It turns out the beeping was coming from the power distribution board (not Parallax's) I was using (it was mounted directly below the FC, and it had a buzzer on it that apparently beeps every time it gets power).
Is the startup beeping when the gyro isn't settled annoying? Should it be disabled under any or some circumstances (usb only)... can the volume be reduced?
BTW - this is a low-priority issue, more for documenting the idea than taking immediate action.