Closed JasonDorie closed 7 years ago
Partly done - now in FloatStreamCompiler branch. Doesn't auto reset, but quantifies noise and range.
Tested and verified. The only concern I have is that when I clicked "upload calibration" both bars went red. I understand why, but docs need to explain what's happening there.
I could make it put a message in there in green saying "upload successful" or something for 5 seconds after you upload. Less confusing.
On Tue, Nov 15, 2016 at 2:28 PM, Matthew Matz notifications@github.com wrote:
Tested and verified. The only concern I have is that when I clicked "upload calibration" both bars went red. I understand why, but docs need to explain what's happening there.
— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub https://github.com/parallaxinc/Flight-Controller/issues/51#issuecomment-260790690, or mute the thread https://github.com/notifications/unsubscribe-auth/ANak_oaxZkIxj63Y27St1WMTIQncgcW9ks5q-jH9gaJpZM4KsEc3 .
Sounds good, if you can, make it so!
Matthew Matz | STEM/Robotics Educator Parallax Inc. | Direct: 916-625-3019 | www.parallax.com | @M atzElectronics http://twitter.com/MatzElectronics
On Tue, Nov 15, 2016 at 3:10 PM, Jason Dorie notifications@github.com wrote:
I could make it put a message in there in green saying "upload successful" or something for 5 seconds after you upload. Less confusing.
On Tue, Nov 15, 2016 at 2:28 PM, Matthew Matz notifications@github.com wrote:
Tested and verified. The only concern I have is that when I clicked "upload calibration" both bars went red. I understand why, but docs need to explain what's happening there.
— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub https://github.com/parallaxinc/Flight-Controller/ issues/51#issuecomment-260790690, or mute the thread https://github.com/notifications/unsubscribe-auth/ANak_ oaxZkIxj63Y27St1WMTIQncgcW9ks5q-jH9gaJpZM4KsEc3 .
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/parallaxinc/Flight-Controller/issues/51#issuecomment-260800303, or mute the thread https://github.com/notifications/unsubscribe-auth/AS0quLaHxSdnEtxb8S3cbou782vGvsn9ks5q-jv6gaJpZM4KsEc3 .
Add code to characterize the quality of gyro calibration.