search

pascallanger / DIY-Multiprotocol-TX-Module

Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
https://www.rcgroups.com/forums/showthread.php?t=2165676&goto=newpost
GNU General Public License v3.0
1.64k stars 439 forks source link

Add FX601 #673

Closed albatorsssx closed 2 years ago

albatorsssx commented 2 years ago

Hello, Can you add the FX 601 model? Here is a link to the product: https://www.banggood.com/FX601-2_4Ghz-2CH-235mm-Wingspan-Delta-Wing-EPP-RC-Airplane-RTF-with-3-Axis-Gyro-System-p-1687052.html?rmmds=myorder&cur_warehouse=ES&ID=531270 And attached is a picture of the radio. 20220324_182102

I've try the FX816 protocol but it seems not to work. No binding.

Thank you in advance.

pascallanger commented 2 years ago

To add a new protocol I need the TX+model to be shipped to my attention in France or participate to the purchase of the model.

pascallanger commented 2 years ago

You can try the new FX 620 subprotocol using the latest test version. Please report if it works.

albatorsssx commented 2 years ago

Hello,

Thank you very much for the implementation. I put the latest test version but I don't see the new protocol.

Is there a problem ?

Thanks,

Jean Louis

pascallanger commented 2 years ago

Have you used the latest test version 1.3.3.18?

albatorsssx commented 2 years ago

No I have found the version 1.3.3.15 on this link : https://downloads.multi-module.org/latest-test/

pascallanger commented 2 years ago

Do you have access to this: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/suites/7390249893/artifacts/300848723

albatorsssx commented 2 years ago

Yes I have access but it's not for my module, I have a iRangeX IRX4 (mm-stm-serial-aetr). Sorry.

pascallanger commented 2 years ago

Test builds are now available. Please try and report.

albatorsssx commented 2 years ago

Yes He is present. Thanks. Unfortunately no binding. Should I configure the channels in a certain way?

pascallanger commented 2 years ago

No... It should just work if that's the right protocol. If you have tried both FX subprotocols then I need to get the TX+model, otherwise there is nothing I can do... You can either ship it to me in France or make a donation to purchase the model.

pascallanger commented 2 years ago

Have you tried other protocols like kf606 and such since looking at the pictures the board seems to be similar.

albatorsssx commented 2 years ago

Sorry for the late response. I was on vacation. I tested but it doesn't work. No bind. It doesn't matter if it doesn't work, the device is just a toy. Thank you anyway for the time spent on this.

pascallanger commented 2 years ago

Yeah without the hardware there is nothing I can do. And frankly, FX "toys" airplanes are quite bad since they have no proportionality on ailerons just throttle.