search

pascallanger / DIY-Multiprotocol-TX-Module

Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
https://www.rcgroups.com/forums/showthread.php?t=2165676&goto=newpost
GNU General Public License v3.0
1.62k stars 436 forks source link

Frsky Archer Plus Binding issue #814

Closed r41065 closed 1 year ago

r41065 commented 1 year ago

New FrSky Archer R10+ does not bind with 4in1.

Works fine with original XJT ( X9D) or ISRM (X9Lite) in ACCST D16 v2 ( LBT, not testet if FCCv2 also works, FCCv1 did not)

Tried all D16 Modes ( FCC /LBT in v1 and v2 ) also with different Values of Finetuning.

In Cloned Modus Receiver also works, but no Chance to bind to a different ID...

RudiKleinSA commented 1 year ago

Hi Keith,

Thank you very much.

Could you please just point me in the right direction.

AAAH - Got it - https://www.frsky-rc.com/archer-sr6/

![Uploading image.png…]()

image

This was on the radio - It did not help me.

Is there something else I must do, or another place?

mick-74 commented 1 year ago

Hi all, first of all thanks for all changes, I have edgetx+ tx16s radiomaster+ MTM .30.

I use frsky archer+ sr10+ and I am able to bind it and from new FW and lua script I can get all gyro value, but the Issue is related to calibration, I can open lua script for calibration, ask me to press enter but script stop there, no chance to exit from script and I have to restart radio.

I used all latest lua and FW from frsky site.

Thanks in advance for any suggestion.

Da: RudiKleinSA @.> Inviato: martedì 29 agosto 2023 19:55 A: pascallanger/DIY-Multiprotocol-TX-Module @.> Cc: Michele Novali @.>; Comment @.> Oggetto: Re: [pascallanger/DIY-Multiprotocol-TX-Module] Frsky Archer Plus Binding issue (Issue #814)

Hi Keith,

Thank you very much.

Could you please just point me in the right direction.

— Reply to this email directly, view it on GitHubhttps://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/814#issuecomment-1697891906, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A7BABAHKXJ4FIJ4SGSJGB3LXXYUHFANCNFSM6AAAAAAUB7XIQI. You are receiving this because you commented.Message ID: @.***>

RudiKleinSA commented 1 year ago

Ok,

I think I found the right LUA SCRIPT at this link below for the "NEW" FLYSKY ARCHER PLUS SR8

https://www.frsky-rc.com/archer-plus-sr8/

image

image

I will test this later today and let you guys know.

RudiKleinSA commented 1 year ago

Hi,

This is what happens when I run the OPEN TX LUA SCRIPTS for the "NEW" FRSKY ARCHER PLUS SR8

These are new Open TX scripts that do not work in Edge TX just by copying them into the scripts folder,

image image Nothing happens when I press Enter.

image image image image Nothing happens when I press Enter.

dbock300 commented 1 year ago

That's the same thing I'm getting

Get Outlook for Androidhttps://aka.ms/AAb9ysg

From: RudiKleinSA @.> Sent: Wednesday, August 30, 2023 11:36:10 AM To: pascallanger/DIY-Multiprotocol-TX-Module @.> Cc: dbock300 @.>; Comment @.> Subject: Re: [pascallanger/DIY-Multiprotocol-TX-Module] Frsky Archer Plus Binding issue (Issue #814)

Hi,

This is what happens when I run the OPEN TX LUA SCRIPTS for the "NEW" FRSKY ARCHER PLUS SR8

These are new Open TX scripts that do not work in Edge TX just by copying them into the scripts folder,

[image]https://user-images.githubusercontent.com/93178003/264409888-77baa228-151d-4a59-b3d0-e38df6ad90d9.png [image]https://user-images.githubusercontent.com/93178003/264410053-2d636c8a-0bc0-470f-9eb8-541c173df51f.png [image]https://user-images.githubusercontent.com/93178003/264410239-438e1041-2c9d-4253-a134-c295bf651321.png [image]https://user-images.githubusercontent.com/93178003/264410380-9b24ae7b-e37c-488b-a935-a6af42cc852e.png [image]https://user-images.githubusercontent.com/93178003/264410535-1cff51d1-99f9-4097-9b5e-3c5f86c17e30.png [image]https://user-images.githubusercontent.com/93178003/264410696-6b8bd818-045c-47ae-a179-e7a46b2092f9.png

— Reply to this email directly, view it on GitHubhttps://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/814#issuecomment-1699506688, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AXAECXGSLOUSKCACIP66D23XX5TXVANCNFSM6AAAAAAUB7XIQI. You are receiving this because you commented.Message ID: @.***>

mick-74 commented 1 year ago

I had same issue because are missing icons, check lua image path. But after that calibration lua doesn't work

From: RudiKleinSA @.> Sent: Wednesday, August 30, 2023 6:36:11 PM To: pascallanger/DIY-Multiprotocol-TX-Module @.> Cc: Michele Novali @.>; Comment @.> Subject: Re: [pascallanger/DIY-Multiprotocol-TX-Module] Frsky Archer Plus Binding issue (Issue #814)

Hi,

This is what happens when I run the OPEN TX LUA SCRIPTS for the "NEW" FRSKY ARCHER PLUS SR8

These are new Open TX scripts that do not work in Edge TX just by copying them into the scripts folder,

[image]https://user-images.githubusercontent.com/93178003/264409888-77baa228-151d-4a59-b3d0-e38df6ad90d9.png [image]https://user-images.githubusercontent.com/93178003/264410053-2d636c8a-0bc0-470f-9eb8-541c173df51f.png [image]https://user-images.githubusercontent.com/93178003/264410239-438e1041-2c9d-4253-a134-c295bf651321.png [image]https://user-images.githubusercontent.com/93178003/264410380-9b24ae7b-e37c-488b-a935-a6af42cc852e.png [image]https://user-images.githubusercontent.com/93178003/264410535-1cff51d1-99f9-4097-9b5e-3c5f86c17e30.png [image]https://user-images.githubusercontent.com/93178003/264410696-6b8bd818-045c-47ae-a179-e7a46b2092f9.png

— Reply to this email directly, view it on GitHubhttps://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/814#issuecomment-1699506688, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A7BABAGJT7JMR25H6XJHZNDXX5TXXANCNFSM6AAAAAAUB7XIQI. You are receiving this because you commented.Message ID: @.***>

dbock300 commented 1 year ago

How to check lua script image path ?

Get Outlook for Androidhttps://aka.ms/AAb9ysg

From: mick-74 @.> Sent: Wednesday, August 30, 2023 11:44:23 AM To: pascallanger/DIY-Multiprotocol-TX-Module @.> Cc: dbock300 @.>; Comment @.> Subject: Re: [pascallanger/DIY-Multiprotocol-TX-Module] Frsky Archer Plus Binding issue (Issue #814)

I had same issue because are missing icons, check lua image path. But after that calibration lua doesn't work

From: RudiKleinSA @.> Sent: Wednesday, August 30, 2023 6:36:11 PM To: pascallanger/DIY-Multiprotocol-TX-Module @.> Cc: Michele Novali @.>; Comment @.> Subject: Re: [pascallanger/DIY-Multiprotocol-TX-Module] Frsky Archer Plus Binding issue (Issue #814)

Hi,

This is what happens when I run the OPEN TX LUA SCRIPTS for the "NEW" FRSKY ARCHER PLUS SR8

These are new Open TX scripts that do not work in Edge TX just by copying them into the scripts folder,

[image]https://user-images.githubusercontent.com/93178003/264409888-77baa228-151d-4a59-b3d0-e38df6ad90d9.png [image]https://user-images.githubusercontent.com/93178003/264410053-2d636c8a-0bc0-470f-9eb8-541c173df51f.png [image]https://user-images.githubusercontent.com/93178003/264410239-438e1041-2c9d-4253-a134-c295bf651321.png [image]https://user-images.githubusercontent.com/93178003/264410380-9b24ae7b-e37c-488b-a935-a6af42cc852e.png [image]https://user-images.githubusercontent.com/93178003/264410535-1cff51d1-99f9-4097-9b5e-3c5f86c17e30.png [image]https://user-images.githubusercontent.com/93178003/264410696-6b8bd818-045c-47ae-a179-e7a46b2092f9.png

— Reply to this email directly, view it on GitHubhttps://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/814#issuecomment-1699506688, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A7BABAGJT7JMR25H6XJHZNDXX5TXXANCNFSM6AAAAAAUB7XIQI. You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/814#issuecomment-1699518131, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AXAECXG4JRAXXK6KVUF2BY3XX5UWPANCNFSM6AAAAAAUB7XIQI. You are receiving this because you commented.Message ID: @.***>

RudiKleinSA commented 1 year ago

Must this ISSUE of not being able to calibrate the "NEW" FRSKY ARCHER PLUS SR8

be reported to EDGE TX https://github.com/EdgeTX

as it might not have anything to do with image

because the binding issue is now resolved,

Ralf-W commented 1 year ago

You already have the missing images in your folder /SCRIPTS/TOOLS/img. But the new lua script is searching them in /SCRIPTS/TOOLS/RB_img. Thus copy /SCRIPTS/TOOLS/img to a new folder /SCRIPTS/TOOLS/RB_img - or rename /SCRIPTS/TOOLS/img to /SCRIPTS/TOOLS/RB_img. Sorry, I don't have the Archer hardware to do any tests myself.

dbock300 commented 1 year ago

I'll give it a try.

Get Outlook for Androidhttps://aka.ms/AAb9ysg

From: Ralf-W @.> Sent: Wednesday, August 30, 2023 1:26:24 PM To: pascallanger/DIY-Multiprotocol-TX-Module @.> Cc: dbock300 @.>; Comment @.> Subject: Re: [pascallanger/DIY-Multiprotocol-TX-Module] Frsky Archer Plus Binding issue (Issue #814)

You already have the missing images in your folder /SCRIPTS/TOOLS/img. But the new lua script is searching them in /SCRIPTS/TOOLS/RB_img. Thus copy /SCRIPTS/TOOLS/img to a new folder /SCRIPTS/TOOLS/RB_img - or rename /SCRIPTS/TOOLS/img to /SCRIPTS/TOOLS/RB_img. Sorry, I don't have the Archer hardware to do any tests myself.

— Reply to this email directly, view it on GitHubhttps://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/814#issuecomment-1699647414, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AXAECXHWU77QGVO3ZCGKTG3XX6AVBANCNFSM6AAAAAAUB7XIQI. You are receiving this because you commented.Message ID: @.***>

pascallanger commented 1 year ago

Could you please open a github issue with edgetx? This is not related to multi anymore.

mFreundt commented 12 months ago

Hallo, I am trying to bind a Archer Plus GR6 to a Radiomaster Pocket with CC2500 Chipset. The solutions described for the 4 in 1 does not seem to work.

I tried the currente Firmware V1.3.3.20, but none of the settings worked...

Question: I learned the D16 = ACCST V2 -> Which should fit to the Compatibility Definition!? Any hint?

Thanks, Martin

Ralf-W commented 11 months ago

Hallo, I am trying to bind a Archer Plus GR6 to a Radiomaster Pocket with CC2500 Chipset. The solutions described for the 4 in 1 does not seem to work.

I tried the currente Firmware V1.3.3.20, but none of the settings worked...

Question: I learned the D16 = ACCST V2 -> Which should fit to the Compatibility Definition!? Any hint?

Thanks, Martin

@mFreundt V1.3.3.20 is not compatible with the new Archer Plus GR6. Update your MultiModulte firmware to 1.3.3.33 and your receiver will work as expected.

mFreundt commented 11 months ago

Hallo, 1.3.3.32 does work. Thanks a lot! best regards, Martin