Open gkathan opened 3 weeks ago
Hey! Strange all tests still pass. Do you have a current that is negative? Can you provide me please logs (no idea where you got the above one from) from here: and can you check the status from the device itself? Also please see breaking change listed here: https://github.com/patman15/BMS_BLE-HA/releases/tag/v1.2.0
hi, ... ok that could answer the issue ... currently my solar panels on roof are producing ... no negative current ... that might explain it ... previous 1.1 version showed some value also with positive current ... will check when the sun goes down cheerz gerold kathan | +43 699 19743536 | www.kathan.at
On Thu, Aug 22, 2024, 16:14 Patrick @.***> wrote:
Hey! Strange all tests still pass. Do you have a current that is negative? Can you provide me please logs (no idea where you got the above one from) from here: Bildschirmfoto.vom.2024-08-22.16-10-40.png (view on web) https://github.com/user-attachments/assets/493a1710-27ce-40a5-96b1-d929f4760adb and can you check the status from the device itself? Bildschirmfoto.vom.2024-08-22.16-10-25.png (view on web) https://github.com/user-attachments/assets/f683cdd9-10ed-47e1-a413-e17c7ff27c43
— Reply to this email directly, view it on GitHub https://github.com/patman15/BMS_BLE-HA/issues/40#issuecomment-2304783051, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABQJLVWV4YHG54DFXAOPU2TZSXW37AVCNFSM6AAAAABM55XAO6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMBUG44DGMBVGE . You are receiving this because you authored the thread.Message ID: @.***>
OK ... this is new behaviour ... if there is negative current all is good again 🤘 ... just when there is positive current no longer an estimate of runtime is calculated ... is this intended ? and other short question ... is it safe to upgrade to HACS version 2.0 ? cheeerz from vienna gerold kathan | +43 699 19743536 | www.kathan.at
On Thu, Aug 22, 2024, 16:56 gerold kathan @.***> wrote:
hi, ... ok that could answer the issue ... currently my solar panels on roof are producing ... no negative current ... that might explain it ... previous 1.1 version showed some value also with positive current ... will check when the sun goes down cheerz gerold kathan | +43 699 19743536 | www.kathan.at
On Thu, Aug 22, 2024, 16:14 Patrick @.***> wrote:
Hey! Strange all tests still pass. Do you have a current that is negative? Can you provide me please logs (no idea where you got the above one from) from here: Bildschirmfoto.vom.2024-08-22.16-10-40.png (view on web) https://github.com/user-attachments/assets/493a1710-27ce-40a5-96b1-d929f4760adb and can you check the status from the device itself? Bildschirmfoto.vom.2024-08-22.16-10-25.png (view on web) https://github.com/user-attachments/assets/f683cdd9-10ed-47e1-a413-e17c7ff27c43
— Reply to this email directly, view it on GitHub https://github.com/patman15/BMS_BLE-HA/issues/40#issuecomment-2304783051, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABQJLVWV4YHG54DFXAOPU2TZSXW37AVCNFSM6AAAAABM55XAO6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMBUG44DGMBVGE . You are receiving this because you authored the thread.Message ID: @.***>
OK ... this is new behaviour ... if there is negative current all is good again 🤘
That's the new behaviour, because the number during charging was useless, i.e. 0xFFFF minutes ~ 45 days. It just resulted in spikes that ruined the scaling for looking at the remaining discharging time.
when there is positive current no longer an estimate of runtime is calculated ... is this intended ?
Yes, see https://github.com/patman15/BMS_BLE-HA/releases/tag/v1.6.2 or more detailed https://github.com/patman15/BMS_BLE-HA/pull/39 :-)
and other short question ... is it safe to upgrade to HACS version 2.0 ?
Sorry, no idea yet, haven't upgraded so far. I hope yes ...
just to let you know - upgraded now to HACS 2.0 in my van setup => ALL GOOD, everything is WORKING
Thanks for letting me know, I assumed that the HACS version is not relevant for the integration, but you never know ...
Checklist
Describe the issue
hi, i just upgraded via HACS from v1.1.0 to 1.6.2 and now the entity "runtime" has no value anymore
anything I can do ? or is there some issue on integration side ... cheerz from vienna
Reproduction steps
just updated and before it worked
Debug logs